☆ 4.6 Article

Insights into Interfacial Features of Metal/Eco-Composites Designed for Energy Storage

COATINGS (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Polyimides containing cycloaliphatic units and chalcogen atoms as alternative shielding coatings for solar cells

Andreea Irina Barzic et al.

Summary: This work proposes alternative materials for shielding solar cells with low weight and better flexibility, which are four polyimides containing cycloaliphatic units and chalcogen atoms. The focus is on the rheological properties of the polyimide solutions and obtaining uniform coatings through tape casting. The shear deformation response of the solutions is influenced by the structural characteristics of each polymer sample. The flow index and consistency of the solutions are assessed using the Ostwald model.

POLYMER BULLETIN (2023)

Add to Collection

Article Polymer Science

Rheological and optical response of hydroxypropyl methylcellulose under variable temperatures for optical switching based on thermo-optical effect

Iuliana Stoica et al.

Summary: This study investigates the rheological and optical response of HPMC under temperature variations, revealing correlations between flow behavior, film thickness uniformity, and surface parameters like roughness and texture. The study also reports the refractive properties of HPMC for the first time and observes changes in optical dispersion parameters with temperature increase. The thermo-optic coefficient of HPMC is found to be larger than other polymers, making it suitable for optical switching based on thermo-optical effect.

POLYMERS FOR ADVANCED TECHNOLOGIES (2023)

Add to Collection

Article Polymer Science

Investigations on anomalous behavior of ionic conductivity in NaPF6 salt loaded hydroxyethyl cellulose biodegradable polymer electrolyte for energy storage applications

Chetan Chavan et al.

Summary: This article investigates the influence of NaPF6 salt content on the structural, electrical, and biodegradable properties of HEC/NaPF6 solid biopolymer electrolyte films. The interaction of salt with the HEC polymer matrix is confirmed by FTIR and SEM studies. The H2-based electrolyte system shows higher conductivity and is more significant for sodium ion batteries.

POLYMERS FOR ADVANCED TECHNOLOGIES (2023)

Add to Collection

Article Chemistry, Physical

The Influence of the Synthesis Method on the Characteristics of BaTiO3

G. N. Almeida et al.

Summary: In this study, barium titanate powders were synthesized using sol-gel and sol-precipitation methods. The microstructural and dielectric properties of the samples prepared by both methods were compared. The sol-gel derived samples exhibited an increase in the tetragonal phase and dielectric constant with increasing temperatures, while the sol-precipitation derived sample was cubic. The presence of BaCO3 was more evident in the sol-precipitation derived sample, and the band gap of the products did not show significant variation with the synthesis method.

MATERIALS (2023)

Add to Collection

Article Green & Sustainable Science & Technology

Hydroxyethyl cellulose/boron nitride nanosheet films coated with silver nanowires for electronic packaging applications

J. Huang et al.

Summary: In this study, hydroxyethyl cellulose (HEC) and boron nitride nanosheets (BNNS) films (HB) coated with silver nanowires (AgNWs) were prepared to achieve one side conduction and the other side insulation and heat conduction. The HB/AgNWs1.0 film with high conductivity, tensile strength, and thermal conductivity was used as a bending sensor. The resistance of the film increased with greater curvature due to the distance between AgNWs in the conductive network. The combination of AgNWs and HB composite film allowed the sensor to function normally for multiple cycles and the BNNS effectively removed the heat generated by the AgNWs, showing potential in electronic packaging.

MATERIALS TODAY SUSTAINABILITY (2023)

Add to Collection

Article Materials Science, Paper & Wood

Cellulose derivative/barium titanate composites with high refractive index, conductivity and energy density

Andreea Irina Barzic et al.

Summary: This study investigates hydroxypropyl cellulose/barium titanate composites for electric energy storage applications. The results show that the incorporation of barium titanate particles improves the structural, optical, mechanical, and dielectric properties of the films.

CELLULOSE (2022)

Add to Collection

Article Engineering, Environmental

Enhanced energy storage performance of polymer nanocomposites using hybrid 2D ZnO@MoS2 semiconductive nano-fillers

Fei Wen et al.

Summary: This article presents the fabrication of hybrid semiconductive nanofillers using MoS2 two-dimensional nanosheets and ZnO zero-dimensional nanoparticles in different ratios, and the preparation of P(VDFCTFE-DB)/ZnO@MoS2 composites. The composites with hybrid fillers exhibit optimized discharged energy density and efficiency, showing significant impact on the polymer matrix.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Carbon fiber reinforced epoxy composite combining superior electrochemical energy storage and mechanical performance

Qigang Han et al.

Summary: This study designed and manufactured a highly integrated composite material that can efficiently store energy and withstand mechanical loads for the electric power systems of UAVs. The composite exhibited high specific capacity, large energy density, and long cycle life, while also possessing superior mechanical properties.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Composites

New shielding covers based on transparent polyimide/ferrous sulfide composites that reduce optical losses in solar cells

Andreea Irina Barzic et al.

Summary: A set of new composites based on fluorinated polyimide and ferrous sulfide were prepared for use as shielding covers in solar cells. The films showed high transmittance above 77% at 500 nm with 10% ferrous sulfide, maintaining good optical clarity. The study also highlighted the temperature effect on refractive index and the hydrophobic nature of the polyimide structure, providing anti-soiling features to the composite samples.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Enhanced high-temperature energy storage properties of polymer composites by interlayered metal nanodots

Shuai Li et al.

Summary: This study improves the energy storage performance of polymer dielectrics by preparing a novel sandwiched polymer/metal structure, which significantly enhances the dielectric properties and high-temperature energy storage performance of the polymers, even at low concentrations of metal nanodots.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Materials Science, Composites

Dielectric Properties of Wood-Polymer Composites: Effects of Frequency, Fiber Nature, Proportion, and Chemical Composition

Imen Elloumi et al.

Summary: Wood fibers modify the resistivity of polyethylene at low frequencies, increasing fiber content enhances the composites' dielectric properties, and composites with high cellulose content show higher dielectric constants.

JOURNAL OF COMPOSITES SCIENCE (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Conducting chitosan/hydroxylethyl cellulose/polyaniline bionanocomposites hydrogel based on graphene oxide doped with Ag-NPs

A. M. Youssef et al.

Summary: The study focuses on the preparation of a cheap and simple chitosan/hydroxyl ethylcellulose/polyaniline loaded with graphene oxide doped by silver nanoparticles as a biodegradable hydrogel for energy storage technology. The addition of graphene oxide doped with silver nanoparticles enhances the conductivity of the hydrogels significantly while maintaining biocompatibility and antibacterial properties.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Polymer Science

High Cyclability Energy Storage Device with Optimized Hydroxyethyl Cellulose-Dextran-Based Polymer Electrolytes: Structural, Electrical and Electrochemical Investigations

Muhammad A. S. Azha et al.

Summary: A Dex-HEC blend impregnated with NH4Br was prepared by solution cast method, with optimized conductivity leading to a fabricated electrical double layer capacitor that showed excellent cycling performance and high energy density.

POLYMERS (2021)

Add to Collection

Review Chemistry, Physical

Polymer-based dielectrics with high permittivity for electric energy storage: A review

Jun-Wei Zha et al.

Summary: This review discusses the current research and development trends in polymer-based dielectric materials, focusing on key factors for improving permittivity and introducing the latest technological advancements.

NANO ENERGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of nanofiller morphology on the electrical conductivity of polymer nanocomposites

Qichen Fang et al.

Summary: The study found that silver nanowire-based nanocomposites have a lower percolation threshold, and the aggregation geometry of nanofillers is a dominant factor in altering percolation behavior.

NANO EXPRESS (2021)

Add to Collection

Article Materials Science, Composites

Dielectric Constant Enhancement with Low Dielectric Loss Growth in Graphene Oxide/Mica/Polypropylene Composites

Chao-Yu Lee et al.

Summary: In this study, a thin 2D platelet of mica/graphene oxide composite material was added to polypropylene to improve its dielectric properties without increasing dielectric loss. The results show that by adding a small amount of mica/graphene oxide, the energy density and dielectric strength of polypropylene can be enhanced effectively.

JOURNAL OF COMPOSITES SCIENCE (2021)

Add to Collection

Review Polymer Science

Chemical Surface Modification of Polymeric Biomaterials for Biomedical Applications

Wei Su et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2020)

Add to Collection

Review Biochemistry & Molecular Biology

A review on grafting of hydroxyethylcellulose for versatile applications

Aqdas Noreen et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Engineering, Chemical

Improving the adhesion strength of polymers: effect of surface treatments

Marouen Hamdi et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Polymer Science

Electrical properties of two-armed poly(ε-CL-co-BMA) composites filled with bentonite

Guzin Pihtili et al.

JOURNAL OF POLYMER RESEARCH (2020)

Add to Collection

Article Polymer Science

Correlation Between Shear-Flow Rheology and Solution Spreading During Spin Coating of Polysilane Solutions

Andreea Irina Barzic et al.

MACROMOLECULAR RESEARCH (2019)

Add to Collection

Article Polymer Science

Semi-alicyclic polyimides as potential membrane oxygenators: Rheological implications on film processing morphology and blood compatibility

R. M. Albu et al.

EXPRESS POLYMER LETTERS (2019)

Add to Collection

Article Engineering, Chemical

Study on the effect of surface morphology on adhesion properties of polybenzimidazole adhesive bonded composite joints

H. M. S. Iqbal et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2017)

Add to Collection

Article Engineering, Chemical

Plasma effect on polyhydrosilane/metal interfacial adhesion/cohesion interactions

Marius Soroceanu et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

On transient-flows of the Ostwald-de Waele fluids-transport in the Darcy-Brinkman porous medium

Abuzar Abid Siddiqui

AIP ADVANCES (2017)

Add to Collection

Article Physics, Multidisciplinary

A study on micro/nano pattern replication using a hydroxyethyl cellulose polymer

Sungmoo Hong et al.

JOURNAL OF THE KOREAN PHYSICAL SOCIETY (2015)

Add to Collection

Article Materials Science, Composites

Percolation Network Formation in Poly(4-vinylpyridine)/Aluminum Nitride Nanocomposites: Rheological, Dielectric, and Thermal Investigations

Razvan Florin Barzic et al.

POLYMER COMPOSITES (2014)

Add to Collection

Review Electrochemistry

Polymer coatings for biomedical applications: a review

J. R. Smith et al.

TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Quasi-steady state power law model for flow of (La0.85Sr0.15)0.9MnO3 ceramic slurry in tape casting

M. Jabbari et al.

MATERIALS SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Physics, Applied

Effect of film thickness on structural, morphology, dielectric and electrical properties of parylene C films

Abdelkader Kahouli

JOURNAL OF APPLIED PHYSICS (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Improving Dielectric Properties of BaTiO3/Ferroelectric Polymer Composites by Employing Surface Hydroxylated BaTiO3 Nanoparticles

Tao Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2011)

Add to Collection

Article Materials Science, Composites

Miscibility and Morphological Properties of Quaternized Polysulfone Blends with Polystyrene and Poly(4-vinylpyridine)

Raluca Marinica Albu et al.

POLYMER COMPOSITES (2011)

Add to Collection

Article Biophysics

Surface tension properties of surface-coatings for application in biodiagnostics determined by contact angle measurements

M Rankl et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2003)

Add to Collection

Article Nanoscience & Nanotechnology

Non-Newtonian fluid flow model for ceramic tape casting

AIY Tok et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.