Related references
Note: Only part of the references are listed.An Estimation of Local Residual Stresses in Amorphous and Crystallized Trivalent Chromium Coatings
Robin Guillon et al.
COATINGS (2023)
Mechanical Behaviour of Hard Chromium Deposited from a Trivalent Chromium Bath
Robin Guillon et al.
COATINGS (2022)
Numerical analysis of mixed-mode fatigue crack growth of adhesive joints nusing CZM
A. V. M. Rocha et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
In-situ study on the tensile behavior of Cr-coated zircaloy for accident tolerant fuel claddings
Jishen Jiang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Alternative tribological coatings to electrodeposited hard chromium: a critical review
S. Wang et al.
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2020)
Quantification of mixed mode loading and bond line thickness on adhesive joint strength using novel test specimen geometry
Brock Watson et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
Study on the effect of post curing on the mode II fracture energy of structural adhesive using a parameter identification approach
Xiao Han et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
Characteristics and properties of Cr coatings electrodeposited from Cr(III) baths
S. Mahdavi et al.
MATERIALS RESEARCH EXPRESS (2019)
Determination of the chromium(III) reduction mechanism during chromium electroplating
Dimitri Del Pianta et al.
ELECTROCHIMICA ACTA (2018)
Experimental study and numerical modeling of the damage evolution of thermal barrier coating systems under tension
Li ShaoLin et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2018)
In-situ SEM study of crack initiation, propagation and interfacial debonding of Ni-P coating during tensile tests: Heat treatment effect
H. Bouaziz et al.
MATERIALS CHARACTERIZATION (2017)
Cohesive and XFEM evaluation of adhesive failure for dissimilar single-lap joints
Florin Adrian Stuparu et al.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)
Determination of interfacial adhesion energies of thermal barrier coatings by compression test combined with a cohesive zone finite element model
W. Zhu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Cohesive law estimation of adhesive joints in mode II condition
J. C. S. Azevedo et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2015)
A novel pillar indentation splitting test for measuring fracture toughness of thin ceramic coatings
M. Sebastiani et al.
PHILOSOPHICAL MAGAZINE (2015)
Numerical study on interaction of surface cracking and interfacial delamination in thermal barrier coatings under tension
W. Zhu et al.
APPLIED SURFACE SCIENCE (2014)
Chromium electroplating from trivalent chromium baths as an environmentally friendly alternative to hazardous hexavalent chromium baths: comparative study on advantages and disadvantages
V. S. Protsenko et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2014)
Preparation of Crystalline Chromium Coating on Cu Substrate Directly by DC Electrodepositing from Wholly Environmentally Acceptable Cr(III) Electrolyte
Aimin Liang et al.
MATERIALS LETTERS (2014)
Numerical evaluation of cohesive and adhesive failure modes during the indentation of coated systems with compliant substrates
Newton K. Fukumasu et al.
SURFACE & COATINGS TECHNOLOGY (2014)
The effect of formic acid concentration on the conductivity and corrosion resistance of chromium carbide coatings electroplated with trivalent chromium
Chen-En Lu et al.
APPLIED SURFACE SCIENCE (2013)
Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer
R. D. S. G. Campilho et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Effect of adhesive thickness, adhesive type and scarf angle on the mechanical properties of scarf adhesive joints
Lijuan Liao et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Electrochemical studies of metallic chromium electrodeposition from a Cr(III) bath
Elisabete S. C. Ferreira et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2013)
Effect of periodic surface cracks on the interfacial fracture of thermal barrier coating system
X. L. Fan et al.
APPLIED SURFACE SCIENCE (2012)
Nanocrystalline hard chromium electrodeposition from trivalent chromium bath containing carbamide and formic acid: Structure, composition, electrochemical corrosion behavior, hardness and wear characteristics of deposits
F. I. Danilov et al.
APPLIED SURFACE SCIENCE (2011)
ELECTRODEPOSITION OF CHROMIUM COATINGS FROM SULFATE-CARBAMIDE ELECTROLYTES BASED ON CR(III) COMPOUNDS
V. O. Hordienko et al.
MATERIALS SCIENCE (2011)
Comparison of chromium coatings and electrochemical behaviour with direct current and pulse current deposition in trivalent chromium formate urea bath as alternative to conventional Cr coatings
S. Mohan et al.
SURFACE ENGINEERING (2011)
Characterization of as-deposited and annealed Cr-C alloy coatings produced from a trivalent chromium bath
S. Ghaziof et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Improving the corrosion performance of Cr-C amorphous coatings on steel substrate by modifying the steel surface preparation
S. Ghaziof et al.
SURFACE & COATINGS TECHNOLOGY (2010)
The electrochemical reduction mechanism of trivalent chromium in the presence of formic acid
Zhixiang Zeng et al.
ELECTROCHEMISTRY COMMUNICATIONS (2009)
Kinetics and mechanism of chromium electrodeposition from formate and oxalate solutions of Cr(III) compounds
V. Protsenko et al.
ELECTROCHIMICA ACTA (2009)
Influence of CH3SO3H and AlCl3 in direct and pulse current electrodeposition of trivalent chromium
S. Mohan et al.
SURFACE ENGINEERING (2009)
Electrodeposition and tribological behavior of amorphous chromium-alumina composite coatings
Zhixiang Zeng et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Fabrication of a nanocrystalline Cr-C layer with excellent anti-wear performance
Zhixiang Zeng et al.
MATERIALS LETTERS (2007)
Cracking and decohesion of a thin Al2O3 film on a ductile Al-5%Mg substrate
CJ Xie et al.
ACTA MATERIALIA (2005)
Modeling, optimization, and comparative analysis of trivalent chromium electrodeposition from aqueous glycine and formic acid baths
A Baral et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Improved wear and corrosion resistance of chromium(III) plating by oxynitrocarburising and steam oxidation
KS Nam et al.
MATERIALS LETTERS (2004)
Characterization of intermediate Cr-C layer fabricated by electrodeposition in hexavalent and trivalent chromium baths
SC Kwon et al.
SURFACE & COATINGS TECHNOLOGY (2004)
Evaluation of mechanical properties of ceramic coatings on a metal substrate
T Ohmura et al.
SURFACE & COATINGS TECHNOLOGY (2003)
A tensile-film-cracking model for evaluating interfacial shear strength of elastic film on ductile substrate
BF Chen et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Share Paper
