☆ 4.7 Article

Robust corrosion protection of Ni-thiolate coordination polymer/Mg(OH)2 coating on magnesium alloy AZ31

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Self-healing performance and corrosion resistance of phytic acid/cerium composite coating on microarc-oxidized magnesium alloy

Shuaikang Yang et al.

Summary: A novel method of preparing self-healing phytic acid/cerium composite coating on magnesium alloy via hydrothermal treatment was reported. The dense and homogeneous coating with a thickness of about 5 μm showed excellent corrosion resistance and self-healing behavior, providing long-term protection for the substrate.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Combining the 8-hydroxyquinoline intercalated layered double hydroxide film and sol-gel coating for active corrosion protection of the magnesium alloy

Yahya Jafari Tarzanagh et al.

Summary: The combination of 8-hydroxyquinoline (8-HQ) intercalated layered double hydroxides (LDH) film and sol-gel layer can be used for active corrosion protection of magnesium alloy. The LDH film exhibits higher corrosion resistance, while the LDH@HQ/sol-gel composite shows better anti-corrosion properties.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)

Add to Collection

Article Chemistry, Applied

Bilayer coatings for temporary and long-term corrosion protection of magnesium-AZ31 alloy

Vinodh K. Korrapati et al.

Summary: The study achieved reliable protection on magnesium alloy sheet materials by applying phosphate and silane pre-treatments, followed by alkyd-based coatings. The use of SA pre-treatments at the metal-polymer interface influences the adhesive properties between the solid metal substrate and the alkyd-based coating. Bilayer coatings with organophosphate and organosilane demonstrate protective properties and enhance the peeling of alkyd coat, providing efficient alloy protection.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection

Article Chemistry, Applied

Improving the corrosion resistance and biocompatibility of magnesium alloy via composite coatings of calcium phosphate/carbonate induced by silane

Tianxiao Wang et al.

Summary: Through the study of two composite coatings, researchers found that these coatings can reduce the degradation of magnesium alloy and have their own advantages. The SCA/DCPD coating improved corrosion resistance, while the SCA/CaCO3 coating achieved better biocompatibility.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Corrosion protection investigations of carbon dots and polydopamine composite coating on magnesium alloy

H. D. Zhang et al.

Summary: In this study, a composite coating of nitrogen-doped carbon dots (N-CDs) and polydopamine (PDA) was prepared on a magnesium alloy. The microstructure and corrosion protection performances of the N-CDs/PDA composite coating were characterized and evaluated. The results showed that the corrosion performance of the N-CDs coatings improved with the increase of particle sizes, and a self-healing performance was observed on the surface of the composite coating.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of microstructure on corrosion behaviors for RE2SiO5 (RE=Gd, Y, Er) environmental barrier coatings against calcium-magnesium-alumino-silicate melts

Xin Zhong et al.

Summary: The corrosion behaviors and mechanisms of plasma-sprayed X1-Gd2SiO5 and X2-RE2SiO5 environmental barrier coatings against CMAS melts at 1400°C were investigated. The results showed that the RE2SiO5 coatings dissolved into CMAS melts and formed a continuous apatite phase layer at the interface. In addition, garnet phase was observed only in the X2-Er2SiO5 coating. The corrosion resistance of RE2SiO5 was affected by its microstructure and RE ionic radius.

CORROSION SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Preparation and characterization of calcium phosphate containing coating on plasma electrolytic oxidized magnesium and its corrosion behavior in simulated body fluids

Xue Zhang et al.

Summary: The study focused on the performance of Ca-P coatings prepared in solutions with different pH values on pure magnesium substrate, showing that the 5.7Ca-P coating has excellent corrosion resistance and biocompatibility, providing stable protection in the initial degradation stage.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Development of metal-organic framework (MOF) decorated graphene oxide/MgAl-layered double hydroxide coating via microstructural optimization for anti-corrosion micro-arc oxidation coatings of magnesium alloy

Yanning Chen et al.

Summary: An efficient and simple in-situ growth strategy has been discovered for the preparation of highly reproducible and continuous symbiotic ZIF-8-based anticorrosion coating using graphene oxide/MgAlNO 3 layered double hydroxides buffer layer. The prepared coating exhibits excellent stability and corrosion resistance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced corrosion protection of magnesium alloy via in situ Mg-Al LDH coating modified by core-shell structured Zn-Al LDH@ZIF-8

Pu-Bo Li et al.

Summary: The in-situ synthesis of Mg-Al layered double hydroxide (LDH) conversion coatings and the addition of various modifiers resulted in the successful construction of a hydrophobic film with excellent corrosion resistance.

RARE METALS (2022)

Add to Collection

Article Materials Science, Coatings & Films

Enhancement of corrosion resistance of AZ31B magnesium alloy by preparing MgAl-LDHs coatings modified with imidazolium based dicationic ionic liquids

Yumiao Jiang et al.

Summary: In this study, MgAl-LDHs coatings modified with imidazolium based dicationic ILs were successfully prepared on AZ31B magnesium alloy. The results showed that the composite coating with ILs exhibited double corrosion protection and significantly improved anti-corrosion performance compared to the LDHs coating alone. This work provides a new method to enhance the corrosion resistance of Mg alloys.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Review Chemistry, Physical

Recent Progress in Functionalized Coatings for Corrosion Protection of Magnesium Alloys-A Review

Bingzhi Li et al.

Summary: This paper presents various surface treatments, methods for developing superhydrophobic surfaces, and an overview of advanced self-healing coatings on magnesium alloys in the past decade. The preparation strategies and protection mechanisms of functional coatings are discussed, and a potential research direction is proposed.

MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Robust Self-Healing Graphene Oxide-Based Superhydrophobic Coatings for Efficient Corrosion Protection of Magnesium Alloys

Bingfeng Li et al.

Summary: In this study, a self-healing superhydrophobic coating was developed, which can repair itself and restore its superhydrophobicity after damage. The coating exhibited excellent corrosion protection, mechanical stability, and chemical durability. This research provides new insights into the design of robust self-healing coatings with huge application potential.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion behavior of as-cast magnesium-4 % zinc alloys in simulated body fluid solution: the influence of minor calcium and manganese additionKorrosionsverhalten von Magnesium-4 %Zink-Legierungen im Gusszustand in simulierter Korperflussigkeitslosung: Einfluss eines geringen Calcium- und Manganzusatzes

J. Yu et al.

Summary: The effects of minor amounts of calcium and manganese elements on the corrosion behaviors of newly designed as-cast degradable Mg-4Zn-xMn-xCa alloys have been investigated. The results show that adding calcium and manganese elements can refine the grains and rearrange the distribution of the intermetallic alloys.

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of grain size on the mechanical properties and bio-corrosion resistance of pure magnesium

Zeinab Savaedi et al.

Summary: In addition to grain size, other factors such as texture, distribution of alloying elements, and homogeneity of the microstructure also affect the mechanical properties and corrosion resistance of magnesium alloys. This study investigates the effect of grain size on tensile properties, hardness, and bio-corrosion resistance of commercially pure magnesium through grain growth annealing and hot rolling. The grain growth kinetics and corrosion behavior of commercially pure magnesium are analyzed, and the results show that grain coarsening enhances corrosion resistance.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Chemistry, Physical

Novel Mg-Al-Sn-Ca with enhanced mechanical properties and high corrosion rate via sub-rapid solidification for degradable magnesium alloy

Dawei Wang et al.

Summary: This study utilizes sub-rapid solidification (SRS) to modify the microstructure, particularly the eutectic phase, of Mg-4.5Al-1.5Sn-0.5Ca alloy. The SRS alloy exhibits superior strength-ductility synergy and increased corrosion rates compared to the conventional solidification alloy. This work proposes a novel degradable magnesium alloy and a processing method for its preparation.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Applied

Designing attapulgite-based self-healing superhydrophobic coatings for efficient corrosion protection of magnesium alloys

Shuaiya Xue et al.

Summary: A superhydrophobic coating with corrosion inhibition and self-healing properties was developed to protect magnesium alloy from corrosion. The coating showed outstanding long-lasting anticorrosion performance, excellent abrasion resistance, and chemical stability.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Inhibitive effect of sodium carbonate on corrosion of AZ31 magnesium alloy in NaCl solution

L. Prince et al.

Summary: This study investigated the effect of carbonate ions on the corrosion protection of AZ31 magnesium alloy, highlighting the inhibitive effect of CO32- ions and discussing the underlying mechanisms. Multiple techniques including EIS, potentiodynamic polarization measurements, hydrogen evolution tests, SEM-EDX analysis, and XPS were used to analyze the corrosion behavior.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The chemical treatment of the AZ31-Magnesium alloy surface by a high-performance corrosion protective praseodymium (III)-based film

Mahsa Saket et al.

Summary: This study improved the anti-corrosion properties of Mg-AZ31 alloy through Pr-based film, which significantly increased the corrosion retardation rate and improved the adhesion properties of the coating.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Article Multidisciplinary Sciences

Corrosion protection properties of different inhibitors containing PEO/LDHs composite coating on magnesium alloy AZ31

Gen Zhang et al.

Summary: The study showed that impregnating corrosion inhibitors into PEO coatings via vacuuming process, followed by fast sealing treatment and hydrothermal preparation of LDHs nanocontainers, resulted in significant changes in structure and thickness of the coatings, improving corrosion protection performance. EIS results indicated that AS/Ce-HT specimen exhibited the best corrosion protection.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A burnished and Al-alloyed magnesium surface with improved mechanical and corrosion properties

Yi-Xing Zhu et al.

Summary: Research shows that surface burnishing and alloying of magnesium can result in a thicker and more uniform aluminum-enriched surface layer, which significantly enhances micro-hardness and corrosion resistance. This method helps to address the galvanic corrosion issue with magnesium alloys in engineering applications.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The corrosion of Al-supersaturated Mg matrix and the galvanic effect of secondary phase nanoparticles

Peng-Peng Wu et al.

Summary: Research on Al-supersaturated Mg alloys found that the presence of supersaturated Al helps in forming a protective surface and effectively suppresses micro-galvanic corrosion, while secondary phase nano-particles do not have a significant deteriorating effect on corrosion.

CORROSION SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Active Corrosion Protection of Mg-Al Layered Double Hydroxide for Magnesium Alloys: A Short Review

Xinfang Zhang et al.

Summary: LDHs have been successfully applied in surface protection and functionalization of metal materials due to their special structure, composition, controllability, anion exchange, and other excellent properties. This review focused on the most common LDH preparation methods on magnesium alloys in the past 10 years by summarizing about 70 research papers. The surface of LDH materials were chemically modified to enhance their compatibility with solvents, and their corrosion resistance function was developed as an additive, showing promising potential in composite coatings on Mg alloys.

COATINGS (2021)

Add to Collection

Article Chemistry, Physical

Effect of hydrophobicity on the corrosion resistance of microarc oxidation/self-assembly/nickel composite coatings on magnesium alloys

Wei Shang et al.

Summary: A three-layer composite coating was prepared on the surface of a magnesium alloy using microarc oxidation and self-assembly technology. The hydrophilicity of the self-assembled layer affected the morphological defects and thickness of the composite coating, thereby influencing the corrosion resistance.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Materials Science, Coatings & Films

One-step in situ synthesis of graphene oxide/MgAl-layered double hydroxide coating on a micro-arc oxidation coating for enhanced corrosion protection of magnesium alloys

Yanning Chen et al.

Summary: The research focused on enhancing the anti-corrosion performance of MAO coating by preparing GO/LDH-MAO composite coating on AZ31 magnesium alloy. The organic combination of Mg-Al LDH and GO significantly improved the corrosion protection ability of the coating, revealing promising potential for practical large-scale applications.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Applied

Corrosion resistance, antibacterial activity and drug release of ciprofloxacin-loaded micro-arc oxidation/silane coating on magnesium alloy AZ31

Kui Xue et al.

Summary: A crosslinked ciprofloxacin (CIP) and polymethyltrimethoxysilane (PMTMS) coating with an inner micro-arc oxidation (MAO) was designed to enhance the corrosion resistance and antibacterial properties of magnesium alloy AZ31. The coating showed improved corrosion resistance, antibacterial ability, and cytocompatibility, with potential applications in medical devices and bone implant materials.

PROGRESS IN ORGANIC COATINGS (2021)

Add to Collection

Article Materials Science, Coatings & Films

Sodium dodecyl sulfate (SDS) intercalated Mg-Al layered double hydroxides film to enhance the corrosion resistance of AZ31 magnesium alloy

Yulai Song et al.

Summary: In this study, three different LDHs films were successfully prepared on AZ31 magnesium alloy, with the SDS intercalated LDHs film exhibiting the best corrosion protection performance. The dense and uniform structure of the film effectively prevents corrosion of the magnesium alloy, attributed to its physical barrier effect and anion-exchange capacity.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Al?AlN composite coatings on AZ31 magnesium alloy for surface hardening and corrosion resistance

Wenling Xie et al.

Summary: Al?AlN composite coatings were prepared on AZ31 magnesium alloy substrates using filtered cathodic vacuum arc deposition. The increase in substrate bias led to higher AlN phase content, lower Al phase content, and improved hardness of the coatings. The microstructure, coating thickness, and residual stress were found to be influenced by the substrate bias.

VACUUM (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Silane coatings modified with hydroxyapatite nanoparticles to enhance the biocompatibility and corrosion resistance of a magnesium alloy

Aida Nikbakht et al.

Summary: The corrosion rate of magnesium alloys can be reduced by applying a silane coating and hydroxyapatite nanoparticles, which not only increases corrosion resistance and biocompatibility but also promotes osteoblastic cell growth and differentiation.

RSC ADVANCES (2021)

Add to Collection

Article Materials Science, Ceramics

Improved corrosion resistance of AZ91D magnesium alloy coated by novel cold-sprayed Zn-HA/Zn double-layer coatings

Hai-Long Yao et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion resistance of self-cleaning silane/polypropylene composite coatings on magnesium alloy AZ31

Zhao-Qi Zhang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Applied

Active corrosion performance of magnesium by silane coatings reinforced with polyaniline/praseodymium

Amir Samadi Najibzad et al.

PROGRESS IN ORGANIC COATINGS (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Active corrosion protection of super-hydrophobic corrosion inhibitor intercalated Mg-Al layered double hydroxide coating on AZ31 magnesium alloy

Xin Wang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Add to Collection

Article Chemistry, Physical

Improvement in corrosion resistance and biocompatibility of AZ31 magnesium alloy by NH2+ ions

Xian Wei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Coatings & Films

High corrosion protection performance of the LDH/Ni-P composite coating on AM60B magnesium alloy

K. Abdi-Alghanab et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Covalently-Attached, Surface-Eroding Polymer Coatings on Magnesium Alloys for Corrosion Control and Temporally Varying Support of Cell Adhesion

Yingqi Chen et al.

ADVANCED MATERIALS INTERFACES (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Superhydrophobic coatings for corrosion protection of magnesium alloys

Wenhui Yao et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Surface coordination layer passivates oxidation of copper

Jian Peng et al.

NATURE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Improvements of Corrosion Resistance and Antibacterial Properties of Hydroxyapatite/Cupric Oxide Doped Titania Composite Coatings on Degradable Magnesium Alloys

Yingchao Xu et al.

LANGMUIR (2020)

Add to Collection

Article Chemistry, Applied

Silicon oxide multilayer coatings doped with carbon nanotubes and graphene nanoplatelets for corrosion protection of AZ31B magnesium alloy

J. P. Fernandez-Hernan et al.

PROGRESS IN ORGANIC COATINGS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion and corrosion fatigue performances of micro-arc oxidation coating on AZ31B cast magnesium alloy

Yuna Xue et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Ratio of total acidity to pH value of coating bath: A new strategy towards phosphate conversion coatings with optimized corrosion resistance for magnesium alloys

Chunyan Zhang et al.

CORROSION SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Enhancement corrosion resistance of Mg-Al layered double hydroxides films by anion-exchange mechanism on magnesium alloys

Lifeng Hou et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Overview of advancement and development trend on magnesium alloy

Tiancai Xu et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Sm additions on the microstructure and corrosion behavior of magnesium alloy AZ91

Z. Hu et al.

CORROSION SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Designing for the chemical conversion coating with high corrosion resistance and low electrical contact resistance on AZ91D magnesium alloy

Guoqing Duan et al.

CORROSION SCIENCE (2018)

Add to Collection

Article Materials Science, Ceramics

The fabrication of a CeO2 coating via cathode plasma electrolytic deposition for the corrosion resistance of AZ31 magnesium alloy

Ruonan Ji et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Electrochemistry

In Vitro Corrosion and Antibacterial Performance of Micro-Arc Oxidation Coating on AZ31 Magnesium Alloy: Effects of Tannic Acid

Lan-Yue Cui et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Materials Science, Coatings & Films

Fabrication and corrosion resistance of phosphate/ZnO multilayer protective coating on magnesium alloy

Jing Yuan et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Electrochemical Production of Ultrathin Nickel Nanosheets for Hydrogen Evolution Electrocatalysis

Chengyi Hu et al.

CHEM (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Corrosion Resistance and Biocompatibility of Magnesium Alloy by Mg-Al-Layered Double Hydroxide

Feng Peng et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Corrosion and passivation of magnesium alloys

Fuyong Cao et al.

CORROSION SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Electrochemical deposition and characterization of Zn-Al layered double hydroxides (LDHs) films on magnesium alloy

Fengxia Wu et al.

APPLIED SURFACE SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Unraveling EDTA corrosion inhibition when interleaved into Layered Double Hydroxide epoxy filler system coated onto aluminum AA 2024

Thomas Stimpfling et al.

APPLIED CLAY SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Study of the in situ growth mechanism of Mg-Al hydrotalcite conversion film on AZ31 magnesium alloy

Jun Chen et al.

CORROSION SCIENCE (2012)

Add to Collection

Review Materials Science, Multidisciplinary

Review of Corrosion-Resistant Conversion Coatings for Magnesium and Its Alloys

X. B. Chen et al.

CORROSION (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Cefazolin on the corrosion of mild steel in HCl solution

Ashish Kumar Singh et al.

CORROSION SCIENCE (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Inhibitory action of Phyllanthus amarus extracts on the corrosion of mild steel in acidic media

P. C. Okafor et al.

CORROSION SCIENCE (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion mechanism of model zinc-magnesium alloys in atmospheric conditions

T. Prosek et al.

CORROSION SCIENCE (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Control of biodegradation of biocompatable magnesium alloys

Guangling Song

CORROSION SCIENCE (2007)

Add to Collection

Article Materials Science, Multidisciplinary

About some corrosion mechanisms of AZ91D magnesium alloy

G Ballerini et al.

CORROSION SCIENCE (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.