☆ 4.7 Article

High strain-rate deformation analysis of open-cell aluminium foam

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Article Mechanics

Stress-strain states and energy absorption in open-cell aluminium foams under hypervelocity impact

Shengpu Zhao et al.

Summary: In this study, numerical simulations were conducted to predict the mechanical properties and energy absorption performance of open-cell aluminum foam. A model of open-cell aluminum foam based on Voronoi tessellation was established for hypervelocity impact (HVI) simulation tests. The Hugoniot curves for different foam materials were obtained by extracting the relationship between wave velocity and particle velocity, and the stress, strain, and energy dissipation per unit volume of the foam material were predicted. The numerical results were found to be in good agreement with theoretical predictions, demonstrating the high accuracy of the method for predicting the shock-wave mechanical and energy absorption properties of foam materials.

COMPOSITE STRUCTURES (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Biaxial characterization of open-cell aluminum foams from macro to micro responses

Solomon Huluka et al.

Summary: This experimental work investigated the effect of a biaxial combined compression-torsion loading complexity on the mechanical properties of two types of aluminum foams. The results showed that increasing foam density and loading complexity led to higher yield strength, energy absorption capacity, and micro-hardness. The highest foam strength was observed under the most complicated loading path for the densest foam, due to the variation in cell wall thickness. The SEM analysis revealed that the loading complexity had an impact on particle segregation and densification strain.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

Add to Collection

Article Chemistry, Physical

Strain Rate-Dependent Compressive Properties of Bulk Cylindrical 3D-Printed Samples from 316L Stainless Steel

Michaela Neuhauserova et al.

Summary: The study examines the strain rate sensitivity of 3D-printed samples from 316L stainless steel in different printing orientations. The results indicate a significant impact of strain rate on the mechanical response of the material, as well as a correlation between strain rate sensitivity and printing orientation.

MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Impact Behavior of Additively Manufactured Stainless Steel Auxetic Structures at Elevated and Reduced Temperatures

Tomas Fila et al.

Summary: The study focuses on metamaterials produced using additive manufacturing, revealing their strong dependence on initial temperature and strain rate for both stress-strain response and crushing behavior.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Dynamic penetration of cellular solids: Experimental investigation using Hopkinson bar and computed tomography

Jan Sleichrt et al.

Summary: This study evaluated the performance of three aluminum alloy-based cellular materials through dynamic penetration testing, with detailed analysis using high-speed cameras, wave separation technique, and Digital Image Correlation method. Differential X-ray computed tomography was utilized for advanced pre- and post-impact volumetric analysis of the specimens.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic Deformation Behaviour of Chiral Auxetic Lattices at Low and High Strain-Rates

Anja Mauko et al.

Summary: This study experimentally investigated the mechanical behavior of three different auxetic cellular structures and observed significant auxetic behavior and stress enhancement under different testing conditions, confirming the Poisson's ratio strain-rate dependency for all three structures.

METALS (2021)

Add to Collection

Article Chemistry, Physical

An Experimental and Computational Study of the High-Velocity Impact of Low-Density Aluminum Foam

Matej Borovinsek et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Strain Dependency of Poisson's Ratio of SLS Printed Auxetic Lattices Subjected to Quasi-Static and Dynamic Compressive Loading

Tomas Fila et al.

ADVANCED ENGINEERING MATERIALS (2019)

Add to Collection

Review Engineering, Mechanical

Dynamic compressive behaviour of cellular materials: A review of phenomenon, mechanism and modelling

Yongle Sun et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Compressive behavior of a rolled open-cell aluminum foam

Vasanth Chakravarthy Shunmugasamy et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Engineering, Civil

Dynamic crushing behavior of a multilayer thin-walled aluminum corrugated core: The effect of velocity and imperfection

Mustafa Sankaya et al.

THIN-WALLED STRUCTURES (2018)

Add to Collection

Article Mechanics

Theoretical and numerical investigation of blast responses of continuous-density graded cellular materials

Minzu Liang et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic crushing of cellular materials: A unique dynamic stress-strain state curve

Yuanyuan Ding et al.

MECHANICS OF MATERIALS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of strain-rate effect on the compressive behaviour of closed-cell aluminium foam by 3D image-based modelling

Yongle Sun et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Mechanics

Dynamic and quasi-static bending behaviour of thin-walled aluminium tubes filled with aluminium foam

Isabel Duarte et al.

COMPOSITE STRUCTURES (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Variation of quasi-static and dynamic compressive properties in a single aluminium foam block

Isabel Duarte et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Add to Collection

Article Engineering, Mechanical

Dynamic crushing of cellular materials: A unified framework of plastic shock wave models

Zhijun Zheng et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Analysis of anisotropy and strain rate sensitivity of open-cell metal foam

M. Vesenjak et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection

Article Engineering, Multidisciplinary

The dynamic response of sandwich beams with open-cell metal foam cores

Lin Jing et al.

COMPOSITES PART B-ENGINEERING (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Computational modelling of irregular open-cell foam behaviour under impact loading

M. Borovinsek et al.

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2008)

Add to Collection

Article Mechanics

Dynamics of metal foam deformation during Taylor cylinder-Hopkinson bar impact experiment

SL Lopatnikov et al.

COMPOSITE STRUCTURES (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.