Related references
Note: Only part of the references are listed.Aging Hardening and Precipitation Characteristics of Extruded Mg-9Al-0.8Zn-0.2Mn-0.3Ca-0.2Y Alloy
Hyun Ji Kim et al.
METALS AND MATERIALS INTERNATIONAL (2023)
Effect of Addition of Rare Earth Elements on the Microstructure, Texture, and Mechanical Properties of Extruded ZK60 Alloy
S. Najafi et al.
METALS AND MATERIALS INTERNATIONAL (2023)
Enhancing corrosion resistance of ZK60 magnesium alloys via Ca microalloying: The impact of nanoscale precipitates
Wei Fu et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2023)
Effect of Heat Treatment on Microstructure and Mechanical Properties of Mg-10Li-3Al-3Zn-0.22Si Alloy
Yazhao Shen et al.
METALS AND MATERIALS INTERNATIONAL (2022)
Athermally enhanced recrystallization kinetics of ultra-low carbon steel via electric current treatment
Kyeongjae Jeong et al.
ACTA MATERIALIA (2022)
Microstructural Characterization and Investigation on Corrosion Properties of Mg-Zn-RE-Ca Alloy as a Possible Biomedical Implant
Milad Johari et al.
METALS AND MATERIALS INTERNATIONAL (2022)
Effect on Zn on Microstructures and Mechanical Properties of Mg-Gd-Y-Zn LPSO Alloys
Jonghyun Kim et al.
METALS AND MATERIALS INTERNATIONAL (2022)
Texture tailoring of a cold-rolled Mg-Zn-Gd alloy by electropulse treatment: The effect of electropulse and Gd element
Zhike Deng et al.
MATERIALS CHARACTERIZATION (2022)
Effect of the Secondary Phase on Mechanical and Damping Properties of Mg-Zn-Y-Si Alloy
Wan Diqing et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Accelerated recrystallization behavior of commercially pure titanium subjected to an alternating-current electropulse
Myoungjae Lee et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Simultaneous improvement of electromagnetic shielding effectiveness and corrosion resistance in magnesium alloys by electropulsing
Guozhu Zhang et al.
MATERIALS CHARACTERIZATION (2021)
Effects of Electropulsing Treatment on the Element Diffusion Between Ti6Al4V and Commercially Pure Titanium
Xia'nan Li et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)
Tailoring strength-ductility balance of caliber-rolled AZ31 Mg alloy through subsequent annealing
Taein Kong et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2020)
Prediction of Electropulse-Induced Nonlinear Temperature Variation of Mg Alloy Based on Machine Learning
Jinyeong Yu et al.
KOREAN JOURNAL OF METALS AND MATERIALS (2020)
Plastic anisotropy of multi-pass caliber-rolled Mg alloy with split texture distribution
Byung Je Kwak et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Elucidating the origin of electroplasticity in metallic materials
Moon-Jo Kim et al.
APPLIED MATERIALS TODAY (2020)
Effect of Pulsed Electric Current on TRIP-Aided Steel
Hye-Jin Jeong et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2019)
Low temperature annealing of metals with electrical wind force effects
Daudi Waryoba et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Enhanced yield symmetry and strength-ductility balance of caliber-rolled Mg-6Zn-0.5Zr with ultrafine-grained structure and bulk dimension
Taekyung Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of cold rolling reduction rate on mechanical properties and electrical conductivity of Cu-Ni-Si alloy prepared by temperature controlled mold continuous casting
Wanneng Liao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
A Comparative Study on the Static Recrystallization Behavior of Cold-Rolled Mg-3Al-1Zn Alloy Stimulated by Electropulse Treatment and Conventional Heat Treatment
Xiaopei Li et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Exceptional mechanical properties of ultra-fine grain AZ31 alloy by the combined processing of ECAP, rolling and EPT
Guangwei Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Constitutive analysis of electrically-assisted tensile deformation of CP-Ti based on non-uniform thermal expansion, plastic softening and dynamic strain aging
Taekyung Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Effect of electric current on recrystallization kinetics in interstitial free steel and AZ31 magnesium alloy
Ju-Won Park et al.
MATERIALS CHARACTERIZATION (2017)
Effect of pulsed electric current on dissolution of Mg17Al12 phases in as-extruded AZ91 magnesium alloy
Hye-Jin Jeong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Texture modification of magnesium alloys during electropulse treatment
Ruikun Zhang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Experimental investigation on electrically assisted cylindrical deep drawing of AZ31B magnesium alloy sheet
Huanyang Xie et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Microstructure study of a severely plastically deformed Mg-Zn-Y alloy by application of low angle annular dark field diffraction contrast imaging
Dudekula Althaf Basha et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2016)
The origin and enhancement of {0001}⟨11(2)over-bar0⟩ texture during heat treatment of rolled AZ31B magnesium alloys
M. A. Steiner et al.
ACTA MATERIALIA (2015)
Recrystallization and microstructure evolution of the rolled Mg-3Al-1Zn alloy strips under electropulsing treatment
Yang Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Microstructure, mechanical properties and static recrystallization behavior of the rolled ZK60 magnesium alloy sheets processed by electropulsing treatment
Wei Jin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Improved mechanical properties of Mg-9Al-1Zn alloy by the combination of aging, cold-rolling and electropulsing treatment
Yanbin Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Microstructure and mechanical properties of ZK60-Er magnesium alloys
Boquan Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Microstructure and Texture Evolution of Magnesium Alloys During Electropulse Treatment
Jie Kuang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
A Review of Electrically-Assisted Manufacturing
Huu-Duc Nguyen-Tran et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2015)
Enhanced recovery and recrystallization of metals due to an applied current
D. Fabregue et al.
SCRIPTA MATERIALIA (2014)
Characterization of Flow Stress for Commercially Pure Titanium Subjected to Electrically Assisted Deformation
James Magargee et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2013)
Mechanism of electropulsing induced recrystallization in a cold-rolled Mg-9Al-1Zn alloy
Yanbin Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Effect of heat treatment on electromagnetic shielding effectiveness of ZK60 magnesium alloy
Xianhua Chen et al.
MATERIALS & DESIGN (2012)
Microstructure and texture evolution of the cold-rolled AZ91 magnesium alloy strip under electropulsing treatment
Yanbin Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Electropulse-induced cementite nanoparticle formation in deformed pearlitic steels
R. S. Qin et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Effect of heat treatment on microstructure and mechanical properties of twin roll cast and sequential warm rolled ZK60 alloy sheets
Hongmei Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Enhancement of ductility in Mg-3Al-1Zn alloy with tilted basal texture by electropulsing
Lei Guan et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Effect of the electropulsing on mechanical properties and microstructure of an ECAPed AZ31 Mg alloy
X. N. Du et al.
JOURNAL OF MATERIALS RESEARCH (2008)
The effect of multiple pulse treatment on the recrystallization behavior of Mg-3Al-1Zn alloy strip
Z. Xu et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2007)
Effect of precipitate shapes on fracture toughness in extruded Mg-Zn-Zr magnesium alloys
Hidetoshi Somekawa et al.
JOURNAL OF MATERIALS RESEARCH (2007)
Research for a new age of magnesium in the automotive industry
H Friedrich et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Recrystallization kinetics of low and ultra low carbon steels during high-rate annealing
M Ferry et al.
ISIJ INTERNATIONAL (2001)