☆ 4.7 Article

Precipitation kinetics of niobium carbide (NbC) during homogenization heat treatment of additively manufactured inconel 718 superalloy

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Role of microstructural phases in enhanced mechanical properties of additively manufactured IN718 alloy

Sumit Choudhary et al.

Summary: The effect of different microstructural phases on mechanical and fatigue properties of additively manufactured Inconel 718 alloy was investigated in three different material conditions: as-built, as-built-machined, and as-built-heat-treated. The as-built samples showed a continuous structure of columnar and cellular dendrites of laves phases due to microsegregation. Machining reduced surface roughness and improved tensile and fatigue strength. Heat treatment resulted in dissolution of melt pool boundaries, breakdown of dendritic structure, and improved mechanical and fatigue properties. Four types of fatigue damage mechanisms were observed. The changes in properties were correlated with microstructural changes.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical Characterization of Near-Isotropic Inconel 718 Fabricated by Laser Powder-Bed Fusion

Sunny Sharma et al.

Summary: This study investigated the microstructural evolution and mechanical properties of the Ni-based superalloy Inconel (R) 718 fabricated by powder-based laser fusion process. The characterization involved X-ray diffraction, optical, and scanning electron microscopy. The results showed that solution heat treatment effectively reduced detrimental Laves phases and relieved thermal residual stresses caused by non-homogeneous recrystallization. This research is significant for understanding the improvement of structural properties in Ni-based superalloys.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of NbC inoculants on the elastic properties and microstructure of additively manufactured IN718

J. F. S. Markanday et al.

Summary: This study investigates the effects of NbC inoculants on the elastic properties and microstructure of LBP-DED IN718. The addition of NbC particles increased the volume fraction of MC-type carbides and decreased that of the Laves phase. It was found that samples containing the inoculant exhibited marginally increased hardness and an enhanced {110} 211 Brass texture component. This textural enhancement is theorized to be a result of NbC restricting dendritic growth along specific directions during build, offering a method of achieving microstructural and textural control during additive manufacturing.

MATERIALIA (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Dissolution kinetics of Laves phase during homogenization heat treatment of additively manufactured Inconel 718 superalloy

Sajad Ghaemifar et al.

Summary: The dissolution kinetics of the undesirable Laves phase in Inconel 718 was investigated through homogenization heat treatment. The activation energy and kinetic characteristics of Laves phase dissolution were determined, and the diffusion of Nb in Ni was identified as the key mechanism.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Review Materials Science, Multidisciplinary

Additive manufacturing of nickel-based superalloys: A state-of-the-art review on process-structure-defect-property relationship

Amir Mostafaei et al.

Summary: This review provides a comprehensive discussion on fusion-based additive manufacturing (AM) of Nickel-based superalloys, focusing on the influential factors affecting microstructure, mechanical properties and defect generation. The mechanical properties of AM Nickel-based superalloys are analyzed, and commonly utilized modeling approaches in literature are highlighted.

PROGRESS IN MATERIALS SCIENCE (2023)

Add to Collection

Review Materials Science, Multidisciplinary

A review on metallurgical aspects of laser additive manufacturing (LAM): Stainless steels, nickel superalloys, and titanium alloys

Kh. Moeinfar et al.

Summary: Additive Manufacturing (AM) is an advanced process for layer-by-layer production of engineering components, offering high quality and productivity. This review paper explores the key metallurgical phenomena, different technology routes, microstructural aspects, and functional and mechanical properties in Laser Additive Manufacturing (LAM), as well as evaluates the field's growth potential.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Review Engineering, Manufacturing

Post-processing of additively manufactured metallic alloys - A review

Amir Malakizadi et al.

Summary: This review paper examines the effects of post-processing/finishing operations on additively manufactured materials, focusing on the relationship between different AM technologies and microstructural properties of materials. The study also investigates how post-processing/finishing influences mechanical properties and performance factors such as fatigue, tribology, and corrosion resistance.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Post-processing of additively manufactured high-entropy alloys-A review

Hasti Khodashenas et al.

Summary: This article reviews the heat treatment methods for additive manufacturing of high-entropy alloys (HEAs), including hot isostatic pressing (HIP), annealing/solutionizing treatment, aging treatment, and deep cryogenic treatment (DCT). These treatments can improve the mechanical and functional properties of additively manufactured HEAs, and important suggestions for future research are proposed.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Post-processing heat treatment of lightweight magnesium alloys fabricated by additive manufacturing: a review

Reza Motallebi et al.

Summary: Additive manufactured magnesium alloys have wide applications in the medical and automotive industries. However, the printability of these alloys is challenging and often results in various defects. This overview article critically discusses recent advances in hot isostatic pressing, solution annealing, and aging/precipitation heat treatment for improving the microstructure and mechanical/functional properties of magnesium alloys.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Recrystallization and grain growth kinetics of IN718 manufactured by laser powder bed fusion

Merve Nur Dogu et al.

Summary: The recrystallization and grain growth behavior of IN718 alloy manufactured by laser powder bed fusion were studied. The texture evolution of the samples under different temperatures and holding times was investigated, and it was found that the formation of recrystallization nuclei was related to high defect density regions, while the presence of non-coherent precipitates limited the growth of recrystallized grains.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Hybrid post-processing effects of magnetic abrasive finishing and heat treatment on surface integrity and mechanical properties of additively manufactured Inconel 718 superalloys

Kun Li et al.

Summary: This study investigates the hybrid post-processes of magnetic abrasive finishing (MAF) and post-heat treatment (HT) on the additively manufactured Inconel 718 superalloys. The results show that MAF effectively reduces the surface roughness and when combined with proper post-heat treatment, it improves the mechanical properties.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Review Engineering, Manufacturing

Post-processing of additively manufactured metallic alloys-A review

Amir Malakizadi et al.

Summary: Additive manufacturing has unique advantages but the effects of material properties on post-processing need to be understood. This review focuses on the characteristics of different AM technologies and materials' microstructural properties on mechanical performance.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Isothermal Solid-State Transformations of Inconel 718 Alloy Fabricated by Selective Laser Melting

Wenpu Huang et al.

Summary: Inconel 718 samples were subjected to heat treatments to study the precipitation behaviors of different phases. The study found that with increasing aging temperature, the time to reach peak hardness decreases, while the peak hardness decreases with higher aging temperature. The kinetics of precipitation in SLMed Inconel 718 is faster compared to wrought material, with similar phase transition temperatures.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Precipitation behavior of δ phase and its effect on stress rupture properties of selective laser-melted Inconel 718 superalloy

Shuya Zhang et al.

Summary: The study found that the presence of needle-like delta phase at grain boundary in SLM-built IN718 alloy promotes the nucleation of void-formed cracks and accelerates deformation damage, leading to detrimental effects on the rupture life and ductility of the alloy.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Analysis of strain-induced precipitates by delta-processing in Inconel 718 superalloy

Pedro Jacinto Paramo-Kanetas et al.

Summary: Delta-Processing is used to control grain growth during hot deformation of the Ni-base superalloy Inconel 718. This study investigates the precipitation of M23C6 carbides and their interaction with recrystallization phenomena after the alloy has been saturated with delta-phase. Double-strain hot compression tests were conducted to analyze the softening/hardening progress over time, with microstructural characterization using SEM and XRD to identify precipitating/dissolving phases.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Tempering kinetics and corrosion resistance of quenched and tempered AISI 4130 medium carbon steel

Aliasghar Mosayebi et al.

Summary: The study revealed that increasing the tempering time and temperature improved the corrosion resistance of AISI 4130 steel, while the correlation between hardness and corrosion current density (i(corr)) suggests the influence of microstructure on steel performance.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Revisiting the Diffusion of Niobium in an As-Cast Nickel-Based Superalloy During Annealing at Elevated Temperatures

Mohammad Javad Sohrabi et al.

METALS AND MATERIALS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructures and Nb-Rich Precipitation Behaviors of Inconel 718 Superalloy Under Sub-rapid Solidification Process

Wanlin Wang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Creep Characteristics and Fracture Mechanisms of a Ni-Based Superalloy with δ Phases at Intermediate Temperatures

Dao-Guang He et al.

ADVANCED ENGINEERING MATERIALS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Metallurgy principles applied to powder bed fusion 3D printing/additive manufacturing of personalized and optimized metal and alloy biomedical implants: an overview

L. E. Murr

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Sustainability of additive manufacturing: the circular economy of materials and environmental perspectives

Henry A. Colorado et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Precipitation kinetics of γ phase and its mechanism in a Nb-bearing nickel-based superalloy during aging

Mohsen Rafiei et al.

VACUUM (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Influence of post-heat-treatment on the microstructure and fracture toughness properties of Inconel 718 fabricated with laser directed energy deposition additive manufacturing

Xiaobin Yu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Varied heat treatments and properties of laser powder bed printed Inconel 718

Runbo Jiang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Chemistry, Physical

Homogenization kinetics of a typical nickel-based superalloy

Mohsen Rafiei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Micro-mechanisms and precipitation kinetics of delta (δ) phase in Inconel 718 superalloy during aging

Mohsen Rafiei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Engineering, Civil

Aging kinetics and mechanical properties of copper-bearing low-carbon HSLA-100 microalloyed steel

M. J. Sohrabi et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A critical evaluation on efficacy of recrystallization vs. strain induced boundary migration in achieving grain boundary engineered microstructure in a Ni-base superalloy

T. S. Prithiv et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting

V. A. Popovich et al.

MATERIALS & DESIGN (2017)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Applicability of JMAK-type model for predicting microstructural evolution in nickel-based superalloys

Olga Bylya et al.

INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017 (2017)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of solidification rate on MC-type carbide morphology in single crystal Ni-base superalloy AM3

Yu Zhu-huan et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Aging kinetics of 17-4 PH stainless steel

H. Mirzadeh et al.

MATERIALS CHEMISTRY AND PHYSICS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanism of primary MC carbide decomposition in Ni-base superalloys

G Lvov et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Carbide formation in alloy 718 during electron-beam solid freeform fabrication

JE Matz et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)

Add to Collection

Article Materials Science, Multidisciplinary

On some limitations of the Johnson-Mehl-Avrami-Kolmogorov equation

MT Todinov

ACTA MATERIALIA (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.