☆ 4.7 Article

Study of the effect of functionalization with inhibitors on the corrosion properties of PEO-coated additive manufactured AlSi10Mg alloy

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

A Review on the Application-Focused Assessment of Plasma Electrolytic Oxidation (PEO) Coatings Using Electrochemical Impedance Spectroscopy

Vijayan Sobhana Dilimon et al.

Summary: Plasma electrolytic oxidation (PEO) coatings are widely used and their modifications are usually targeted towards specific applications. However, the evaluation of PEO coatings often focuses solely on the intended application without considering other potential uses. Electrochemical impedance spectroscopy (EIS) is a powerful technique for assessing PEO coatings, as it can analyze their structural, morphological, chemical, and electrochemical properties. Therefore, a comprehensive review describing the versatile behavior of PEO coatings using EIS is essential for researchers and engineers to evaluate PEO coatings beyond their intended applications.

ADVANCED ENGINEERING MATERIALS (2023)

Add to Collection

Article Biochemistry & Molecular Biology

A Superior Corrosion Protection of Mg Alloy via Smart Nontoxic Hybrid Inhibitor-Containing Coatings

Andrey S. Gnedenkov et al.

Summary: The study achieved an increase in the corrosion resistance of magnesium and its alloys by forming smart self-healing hybrid coatings in two steps. Firstly, a ceramic-like bioactive coating was synthesized on the surface of biodegradable MA8 magnesium alloy using plasma electrolytic oxidation (PEO) treatment. Then, the porous PEO layer was impregnated with a corrosion inhibitor 8-hydroxyquinoline (8-HQ) and a bioresorbable polymer polycaprolactone (PCL) to enhance the protective properties of the coating.

MOLECULES (2023)

Add to Collection

Article Chemistry, Physical

The Effect of Smart PEO-Coatings Impregnated with Corrosion Inhibitors on the Protective Properties of AlMg3 Aluminum Alloy

Andrey S. Gnedenkov et al.

Summary: Plasma electrolytic oxidation (PEO) was used to form a self-organized microtubular structure protective coating on AlMg3 aluminum alloy in tartrate-fluoride electrolyte. The coating was further modified using corrosion inhibitors and polymer material. The morphology and composition of the obtained oxide coatings were analyzed using X-ray diffraction and scanning electron microscopy. The presence of inhibitors in the PEO-layer was confirmed using micro-Raman spectroscopy and X-ray photoelectron spectroscopy. The corrosion protection and efficiency of the coatings were evaluated using electrochemical impedance spectroscopy and localized scanning techniques. The impregnation of the coating with azole group inhibitors significantly improved the corrosion characteristics of the material, and additional sealing with polymer further enhanced the corrosion stability.

MATERIALS (2023)

Add to Collection

Article Polymer Science

Hybrid Coatings for Active Protection against Corrosion of Mg and Its Alloys

Andrey S. Gnedenkov et al.

Summary: A novel surface modification method was developed to improve the corrosion performance of biodegradable magnesium alloys. Plasma electrolytic oxidation and treatment with biocompatible agents were combined to create a porous ceramic-like matrix. The most efficient method for impregnation with sodium oleate and polycaprolactone was selected and optimized. The hybrid coatings demonstrated stable corrosion behavior and self-healing properties, making them effective for biomedical products made from magnesium and its alloys.

POLYMERS (2023)

Add to Collection

Article Materials Science, Ceramics

Evolution of corrosion on microstructure of ceramic coating produced by plasma electrolytic oxidation in molten salt

A. Sobolev et al.

Summary: This study conducted Plasma Electrolytic Oxidation (PEO) experiment in a molten salt and successfully obtained a pure oxide coating. The coating consists of a porous outer sublayer and a dense inner sublayer. The corrosion behavior was related to the changes in surface morphology, as confirmed by electrochemical impedance spectroscopy (EIS) and electron microscopy observation.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Molybdate on Corrosion Performance of Oxide Coating Produced on 7075 Al Alloy Using PEO

Rouhollah Ghorbani et al.

Summary: In this research, plasma electrolytic oxidation (PEO) coatings were prepared on 7075 Al alloy with the addition of Na2MoO4. The coatings showed the presence of Al2O3, SiO2, and MoO3 compounds. Molybdenum species were able to enter the coating through cracks and channels, partially sealing the pores. The addition of Na2MoO4 significantly improved the barrier action and corrosion resistance of the coatings.

COATINGS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Exploring the corrosion inhibition mechanism of 8-hydroxyquinoline for a PEO-coated magnesium alloy

Bahram Vaghefinazari et al.

Summary: This study explores the corrosion inhibition effect of 8-hydroxyquinoline (8HQ) on a PEO-coated AZ21 magnesium alloy. The corrosion inhibition mechanism is attributed to the extensive precipitation of insoluble complex between 8HQ molecules and Mg(2+) on top of the PEO layer.

CORROSION SCIENCE (2022)

Add to Collection

Article Materials Science, Coatings & Films

Effects of silica nanoparticles addition on formation of oxide layers on Al-Si alloy by plasma electrolytic oxidation: The origin of stishovite under ambient conditions

Mikhail M. Krishtal et al.

Summary: The effects of adding different sizes of amorphous silica nanoparticles to the electrolyte during plasma-electrolytic oxidation of Al-Si alloy 361.0 were studied. The presence of 48 nm nanoparticles led to the unexpected formation of high pressure SiO2-phase, increasing oxidizability and improving the properties of oxide layers. A quantitative model was introduced to explain the interaction between nanoparticles and oxide layers, predicting structural changes and improvements in protective and mechanical properties.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Smart composite antibacterial coatings with active corrosion protection of magnesium alloys

A. S. Gnedenkov et al.

Summary: A new method of forming composite coatings with active corrosion protection function for magnesium alloys was developed using plasma electrolytic oxidation (PEO) method. The study showed that the composite coatings exhibited good resistance to pitting corrosion, and their protective properties were further enhanced by impregnating the surface layers with corrosion inhibitors. Additionally, controllable polymer pore sealing was found to enhance the overall protective effect. This research is of significant importance in the development of smart coatings with active anti-corrosion functionality, expanding the applications of electrochemically active materials, and potentially reducing the incidence of implant-related infections.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

Add to Collection

Article Multidisciplinary Sciences

Influence of silicon morphology on direct current plasma electrolytic oxidation process in AlSi10Mg alloy produced with laser powder bed fusion

L. Pezzato et al.

Summary: In this study, the effects of silicon morphology on the plasma electrolytic oxidation (PEO) coating of AlSi10Mg samples produced through laser powder bed fusion (L-PBF) were investigated. The results showed that the heat treatments modified the silicon distribution in the samples. The microstructure, composition, corrosion resistance, and hardness of the coatings were characterized, and it was found that the silicon distribution influenced the performance of the coatings, with the coatings on the as printed and annealed samples exhibiting better corrosion resistance.

SCIENTIFIC REPORTS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Recent progress in surface modification of metals coated by plasma electrolytic oxidation: Principle, structure, and performance

Mosab Kaseem et al.

Summary: This review discusses the development of metallic materials with excellent surface properties through plasma electrolytic oxidation, focusing on scientific principles, microstructural features, protective characteristics, and functional applications of the coating. Various benign approaches to improve the structural and functional properties of coating layers are also described.

PROGRESS IN MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Coatings & Films

Growth characteristics and properties of micro-arc oxidation coatings on AlSi10Mg selective laser-melted components

Yupeng Guo et al.

Summary: Micro-arc oxidation (MAO) ceramic coatings were successfully applied to porous AlSi10Mg selective laser-melted components to enhance their corrosion resistance. The composition of the coatings mainly consisted of gamma-Al2O3 with trace amounts of other compounds, leading to a significant improvement in corrosion properties with increasing processing time.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Polymer Science

Study on the Corrosion Resistance of Graphene Oxide-Based Epoxy Zinc-Rich Coatings

Yong Tian et al.

Summary: In this study, graphene oxide modified by sulfonated multiwall carbon nanotubes was successfully used to improve the corrosion resistance of zinc-rich epoxy coatings and reduce zinc usage. The addition of graphene oxide in the coatings effectively enhanced the shielding effect and electrical connection between Zn particles and metal substrates, leading to better corrosion resistance in the GO-ZRC coating.

POLYMERS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Optimization of Surface Properties of Plasma Electrolytic Oxidation Coating by Organic Additives: A Review

Mosab Kaseem et al.

Summary: This review summarizes the impact of organic additives on the electrical response and plasma discharges behavior during the PEO process, as well as the influence on the corrosion behavior of PEO coatings. Future directions and challenges regarding industrial applications of PEO coatings made in organic electrolytes are highlighted.

COATINGS (2021)

Add to Collection

Article Chemistry, Physical

Plasma electrolytic oxidation of zinc alloy in a phosphate-aluminate electrolyte

C. Blawert et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Materials Science, Coatings & Films

AC plasma electrolytic oxidation of additively manufactured and cast AlSi12 alloys

Aleksey B. Rogov et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Coatings & Films

Effect of microstructure and porosity of AlSi10Mg alloy produced by selective laser melting on the corrosion properties of plasma electrolytic oxidation coatings

L. Pezzato et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion behavior of AlSi10Mg alloy produced by laser powder bed fusion under chloride exposure

M. Cabrini et al.

CORROSION SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of graphene additive on microstructure and properties of MAO ceramic coatings formed on AA7050

Y. Zong et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection

Article Chemistry, Physical

Effects of graphene on structure and corrosion resistance of plasma electrolytic oxidation coatings formed on D16T Al alloy

Wanying Liu et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Materials Science, Coatings & Films

Plasma Electrolytic Oxidation (PEO) as pre-treatment for sol-gel coating on aluminum and magnesium alloys

Luca Pezzato et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Coatings & Films

Influence of hydrothermal treatment on the surface characteristics and electrochemical behavior of Ti-6Al-4V bio-functionalized through plasma electrolytic oxidation

M. Fazel et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Development of Black Corrosion-Resistant Ceramic Oxide Coatings on AA7075 by Plasma Electrolytic Oxidation

Ramesh Babu Nagumothu et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)

Add to Collection

Article Engineering, Industrial

A comparative study on corrosion and microstructure of direct metal laser sintered AlSi10Mg_200C and die cast A360.1 aluminum

Parisa Fathi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Coatings & Films

Effect of potassium permanganate on corrosion and wear properties of ceramic coatings manufactured on CP-aluminum by plasma electrolytic oxidation

F. Shamsi et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Coatings & Films

Plasma electrolytic oxidation in the presence of multiwall carbon nanotubes on aluminum substrate: Morphological and corrosion studies

M. Sabouri et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Coatings & Films

Microstructural, protective, inhibitory and semiconducting properties of PEO coatings containing CeO2 nanoparticles formed on AZ31 Mg alloy

M. Toorani et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Physical

Microstructural characteristics of oxide layer formed by plasma electrolytic oxidation: Nanocrystalline and amorphous structures

M. P. Kamil et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Physical

Corrosion behavior of Al-1wt% Mg-0.85wt%Si alloy coated by micro-arc-oxidation using TiO2 and Na2MoO4 additives: Role of current density

Mosab Kaseem et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of KOH to Na2SiO3 Ratio on Microstructure and Hardness of Plasma Electrolytic Oxidation Coatings on AA 6061 Alloy

Ashutosh Sharma et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)

Add to Collection

Article Electrochemistry

Effects of Pulse Current Mode on Plasma Electrolytic Oxidation of 7075 Al in KMnO4 Containing Solution

Reihane Aliramezani et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Multidisciplinary Sciences

3D printing of high-strength aluminium alloys

John H. Martin et al.

NATURE (2017)

Add to Collection

Article Materials Science, Coatings & Films

Electrochemical response of MoO2-Al2O3 oxide films via plasma electrolytic oxidation

M. Kaseem et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Coatings & Films

Characterization and properties of PEO coatings on 7075 Al alloy grown in alkaline silicate electrolyte containing KMnO4 additive

Reihane Aliramezani et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

Influence of graphene particles on the micro-arc oxidation behaviors of 6063 aluminum alloy and the coating properties

Quanzhi Chen et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

The AlSi10Mg samples produced by selective laser melting: single track, densification, microstructure and mechanical behavior

Wei Pei et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Materials Science, Ceramics

Fabrication of corrosion-resistant Al2O3-CeO2 composite coating on AA7075 via plasma electrolytic oxidation coupled with electrophoretic deposition

T. Arunnellaiappan et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Chemistry, Physical

Ceria embedded nanocomposite coating fabricated by plasma electrolytic oxidation on titanium

M. Aliofkhazraei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Engineering, Industrial

Changing the alloy composition of A17075 for better processability by selective laser melting

Maria L. Montero Sistiaga et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

Add to Collection

Article Engineering, Industrial

Evaluation of corrosion resistance of Al-10Si-Mg alloy obtained by means of Direct Metal Laser Sintering

Marina Cabrini et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

Add to Collection

Article Electrochemistry

Electrochemical Response of Al2O3-MoO2-TiO2 Oxide Films Formed on 6061 Al Alloy by Plasma Electrolytic Oxidation

Mosab Kaseem et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Add to Collection

Article Thermodynamics

Thermal decomposition of ammonium molybdates

Teodora Nagyne Kovacs et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Incorporation of MoO2 and ZrO2 particles into the oxide film formed on 7075 Al alloy via micro-arc oxidation

Mosab Kaseem et al.

MATERIALS LETTERS (2016)

Add to Collection

Article Materials Science, Coatings & Films

Plasma electrolytic oxidation coatings with particle additions - A review

Xiaopeng Lu et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion Behavior of AlSi10Mg Alloy Produced by Additive Manufacturing (AM) vs. Its Counterpart Gravity Cast Alloy

Avi Leon et al.

METALS (2016)

Add to Collection

Article Chemistry, Physical

An investigation of the characteristics of Al2O3/TiO2 PEO nanocomposite coating

A. Bahramian et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Detection and quantification of 2H and 3R phases in commercial graphene-based materials

Mohindar S. Seehra et al.

CARBON (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Silicate-based Plasma Electrolytic Oxidation (PEO) coatings with incorporated CeO2 particles on AM50 magnesium alloy

M. Mohedano et al.

MATERIALS & DESIGN (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Metal Additive Manufacturing: A Review

William E. Frazier

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)

Add to Collection

Article Electrochemistry

Inhibition of AA2024-T351 Corrosion Using Permanganate

Samuel B. Madden et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Discharge behaviors during plasma electrolytic oxidation on aluminum alloy

Run Liu et al.

MATERIALS CHEMISTRY AND PHYSICS (2014)

Add to Collection

Article Chemistry, Applied

Galvanic function of zinc-rich coatings facilitated by percolating structure of the carbon nanotubes. Part II: Protection properties and mechanism of the hybrid coatings

Andras Gergely et al.

PROGRESS IN ORGANIC COATINGS (2014)

Add to Collection

Article Materials Science, Coatings & Films

Effects of electrical parameters on plasma electrolytic oxidation of aluminium

J. Martin et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Impedance spectroscopic study of corrosion inhibition of Al-Pure by organic Schiff base in hydrochloric acid

A. S. Patel et al.

JOURNAL OF SAUDI CHEMICAL SOCIETY (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Electrochemical corrosion properties of CeO2-containing coatings on AZ31 magnesium alloys prepared by plasma electrolytic oxidation

Tae Seop Lim et al.

CORROSION SCIENCE (2012)

Add to Collection

Article Chemistry, Physical

Corrosion response of annealed oxide film of pure Mg via plasma electrolytic oxidation in an electrolyte containing KMnO4

In Jun Hwang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Add to Collection

Article Physics, Applied

Spectroscopic study of electrolytic plasma and discharging behaviour during the plasma electrolytic oxidation (PEO) process

R. O. Hussein et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)

Add to Collection

Article Materials Science, Coatings & Films

Influence of process parameters on electrolytic plasma discharging behaviour and aluminum oxide coating microstructure

R. O. Hussein et al.

SURFACE & COATINGS TECHNOLOGY (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Growth of corrosion-resistant manganese oxide coatings on an aluminum alloy

S. A. Kulinich et al.

INORGANIC MATERIALS (2007)

Add to Collection

Article Chemistry, Physical

Parametric analysis of the selective laser melting process

I. Yadroitsev et al.

APPLIED SURFACE SCIENCE (2007)

Add to Collection

Article Electrochemistry

Effect of electrolyte additives on performance of plasma electrolytic oxidation films formed on magnesium alloy AZ91D

Hongping Duan et al.

ELECTROCHIMICA ACTA (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.