☆ 4.7 Article

Manufacturing and experimental characterization of new-developed natural fiber reinforced polymer nanocomposite

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Composites

Nature-inspired energy dissipation sandwich composites reinforced with high-friction graphene

Jigang Feng et al.

Summary: This study designs and prepares nature-inspired sandwich composites for vibration suppression, which exhibit improved damping properties and surface friction force compared to conventional blended composites. Dynamic mechanical analysis and vibration test results confirm the superior damping properties of sandwich composites. Polydopamine modification of reduced graphene oxide (rGO) enhances the damping capability, providing an effective strategy for vibration energy dissipation and damping enhancement.

COMPOSITES SCIENCE AND TECHNOLOGY (2023)

Add to Collection

Article Engineering, Mechanical

Amplitude-dependent damping characteristics of all-composite sandwich plates with a foam-filled hexagon honeycomb core

Hui Li et al.

Summary: The amplitude-dependent damping characteristics of all-composite sandwich (ACS) plates with a hexagon honeycomb core (HHC) filled by soft foam (SF) are investigated. The solutions of nonlinear fundamental frequencies, mode shapes, and damping ratios of HHC-SF-ACS plates are obtained theoretically. It is found that increasing the Young's or shear moduli of foam material and the filling ratio of SF can improve the damping property of the composite plates significantly.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Add to Collection

Article Polymer Science

Characterization of the mechanical and thermal properties of rape short natural-fiber reinforced thermoplastic composites

Yilmaz Kismet et al.

Summary: The study found that increasing filler amounts improved the flexural strength of HDPE-based composite materials, while having minimal impact on tensile and impact properties.

IRANIAN POLYMER JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of coconut shell nanopowder reinforcement in the development of palm fiber composites

J. Edwin Raja Dhas et al.

Summary: The usage of lightweight materials in aeronautical and automobile industries is important for their high strength, lower weight, and energy consumption. This study focuses on incorporating coconut shell nanofillers in various palm fiber composites to improve their mechanical and morphological properties. The addition of coconut shell nanoparticles enhances the tensile, flexural, impact, hardness, and water absorption characteristics of the composites.

FRONTIERS IN MATERIALS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Investigations on chemical behaviours on mechanical properties of natural fiber Composites: An evaluation

Shammah Stevens et al.

Summary: This article discusses important breakthroughs and chemical treatments associated with natural fiber composites, as well as their applications and business opportunities.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Preparation and characterization of Silk/Bamboo/Glass nano polymer composites

S. Subash et al.

Summary: Composite materials play a vital role in manufacturing due to their lightweight and reasonable strength. This study developed hybrid composites using silk, bamboo, and glass fibers, and enhanced the strength with micro and nano fillers. The mechanical characterization and microstructure studies confirmed the suitability of these composites for various applications in the automobile and aircraft sectors.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Forestry

Influence of drying mode and feed per tooth rate on the fine dust creation in pine and beech sawing on a mini sash gang saw

Tomasz Rogozinski et al.

Summary: The experimental results showed that while the drying process did not affect the general particle size distribution of the sawdust, it did increase the content of very fine dust particles in beech wood sawdust under specific conditions.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2021)

Add to Collection

Article Thermodynamics

A novel battery thermal management system using nano-enhanced phase change materials

Ravindra Jilte et al.

Summary: The study introduces a novel modified battery module configuration using two-layer nanoparticle enhanced phase change materials, which shows better cooling performance for Li-ion cells in electric vehicles. The arrangement of m x n x p maintains cell temperature below 46 degrees C even at a hot ambient temperature of 40 degrees C, indicating the potential of the proposed system for efficient battery thermal management.

ENERGY (2021)

Add to Collection

Article Polymer Science

Rheological and Morphological Properties of Oil Palm Fiber-Reinforced Thermoplastic Composites for Fused Deposition Modeling (FDM)

Mohd Nazri Ahmad et al.

Summary: The research analyzed the rheological behavior of oil palm fiber-reinforced ABS composites in FDM and determined the best processing conditions. It was found that good fiber/matrix adhesion was achieved with a 3 wt% fiber loading, while some pores and fiber pullouts were observed with 5 and 7 wt% fiber loading. The study also revealed that increasing fiber content increased viscosity, showing potential for extrusion process in FDM.

POLYMERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic mechanical analysis of Silk and Glass (S/G/S)/Pineapple and Glass (P/G/P)/Flax and Glass (F/G/F) reinforced Lannea coromandelica blender hybrid nano composites

P. Prabhu et al.

Summary: The research focuses on preparing composite materials with specific mechanical properties by mixing natural fibers with synthetic fibers, and by adding nano fillers and treatment techniques, the mechanical properties and biodegradability of the composites can be significantly improved.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Thermodynamics

Back propagation modeling of shear stress and viscosity of aqueous Ionic-MXene nanofluids

Asif Afzal et al.

Summary: This study utilized back-propagation modeling to analyze the viscosity and shear stress of Ionic-MXene nanofluid, with data collected from experimental analysis. Different models with varying numbers of neurons were developed, and the results showed acceptable accuracy in predicting the behavior of the nanofluid.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Multidisciplinary Sciences

Mechanical and Corrosion Studies of Friction Stir Welded Nano Al2O3 Reinforced Al-Mg Matrix Composites: RSM-ANN Modelling Approach

A. Chandrashekar et al.

Summary: Nano aluminum oxide was prepared using combustion method and Al-Mg/Al2O3 metal matrix nanocomposites were fabricated. The homogeneous dispersion of nano Al2O3 particles in the composites improved the material properties.

SYMMETRY-BASEL (2021)

Add to Collection

Article Thermodynamics

Effects of high-dosage copper oxide nanoparticles addition in diesel fuel on engine characteristics

Umit Agbulut et al.

Summary: The addition of CuO nanoparticles to diesel fuel can improve combustion efficiency, reduce emissions, increase fuel heating value, decrease fuel consumption, and enhance thermal efficiency. CuO additives lead to lower CO, HC, and NOx emissions, along with improved combustion characteristics and engine performance.

ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Synthesis and Characterization of Mechanical Properties and Wire Cut EDM Process Parameters Analysis in AZ61 Magnesium Alloy + B4C + SiC

Thanikodi Sathish et al.

Summary: This study utilized WCEDM process to machine magnesium alloy with reinforcements, and specimens were prepared through stir casting technique. An orthogonal array was used to investigate the effects of WCEDM process parameters on material removal rate and surface roughness.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Microstructure, Mechanical Properties, and Corrosion Behavior of Boron Carbide Reinforced Aluminum Alloy (Al-Fe-Si-Zn-Cu) Matrix Composites Produced via Powder Metallurgy Route

M. Meignanamoorthy et al.

Summary: In this study, AA8079 matrix composites with varying weight percentages of B4C were synthesized using powder metallurgy. The impact of sintering parameters on the properties of the composites was investigated, with higher sintering temperatures and pressures leading to improved density, hardness, compressive strength, and corrosion resistance. Characterization techniques such as XRD, EDAX, and SEM confirmed the uniform dispersion of B4C reinforcement within the AA8079 matrix.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Multi Ceramic Particles Inclusion in the Aluminium Matrix and Wear Characterization through Experimental and Response Surface-Artificial Neural Networks

Ballupete Nagaraju Sharath et al.

Summary: The research incorporated ceramics such as Gr and B4C into the manufacturing of AMMCs through stir casting, showing that the reinforced matrix was harder and had improved wear resistance. The microstructure and worn surface observed through SEM revealed the formation of mechanically mixed layers of B4C and Gr, which effectively protected the sample surface from wear. A response surface analysis and neural network methodology were utilized to optimize weight loss and identify wear parameters' significance.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Parameter Study on Friction Surfacing of AISI316Ti Stainless Steel over EN8 Carbon Steel and Its Effect on Coating Dimensions and Bond Strength

George S. N. Rethnam et al.

Summary: Friction surfacing is a solid-state coating process that improves the efficiency of metallic pattern by plastic deformation, producing fine-grained coatings with superior wear and corrosion properties. This study focused on developing homogeneous coatings of AISI316Ti stainless steel on EN8, and investigated the impact of process parameters on bond strength and dimensions of the coating. Experimentation showed that reducing coating thickness and increasing coating width improved bond strength, with grain-refined coatings enhancing metallurgical study through scanning electron microscopy.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Experimental Investigation of the Friction Stir Weldability of AA8006 with Zirconia Particle Reinforcement and Optimized Process Parameters

Thanikodi Sathish et al.

Summary: The study aims to reduce the welding cost of the Aluminium 8006 alloy while maintaining joint quality through friction stir welding. By utilizing zirconia as a reinforcement agent, the performance of the AA8006 alloy in FSW is improved. Through experimental trials, optimal process parameters are identified to enhance the quality of the weld.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Investigation of Mechanical and Physical Properties of Big Sheep Horn as an Alternative Biomaterial for Structural Applications

Tajammul Hussain M. Mysore et al.

Summary: This study investigates the physical and mechanical properties of bighorns of Deccani breed sheep native from Karnataka, India. The results suggest that the mechanical properties of the horn are significantly affected by the presence of water content, showing anisotropy and depending more on water content than coupon orientation. Wet conditioned specimens exhibited a significant loss in mechanical properties compared to dry specimens.

MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of Fiber Orientation on Impact Resistance Behavior of Woven Sisal Fiber Reinforced Polyester Composite

Genetu A. Dress et al.

Summary: Experimental characterization of impact resistance behavior on woven sisal fiber reinforced polyester composite materials was conducted. It was found that 45 degrees/-45 degrees orientation exhibited higher impact strength compared to other orientations. Understanding the impact behavior with different fiber orientations is crucial for material performance evaluation.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Materials Science, Textiles

Effect of Chemical Treatment on Thermal, Mechanical and Degradation Behavior of Banana Fiber Reinforced Polymer Composites

Ujendra Kumar Komal et al.

JOURNAL OF NATURAL FIBERS (2020)

Add to Collection

Article Construction & Building Technology

Human thermal comfort in passenger vehicles using an organic phase change material- an experimental investigation, neural network modelling, and optimization

Asif Afzal et al.

BUILDING AND ENVIRONMENT (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal properties of treated sugar palm yarn/glass fiber reinforced unsaturated polyester hybrid composites

N. Mohd Nurazzi et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Recent Developments in Luffa Natural Fiber Composites: Review

Mohamad Alhijazi et al.

SUSTAINABILITY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Finite element analysis of natural fibers composites: A review

Mohamad Alhijazi et al.

NANOTECHNOLOGY REVIEWS (2020)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

EXPERIMENTAL AND NUMERICAL STUDIES ON THE MECHANICAL CHARACTERIZATION OF EPDM/ S-SBR NANO CLAY COMPOSITES

K. Mohamed Bak et al.

3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6 (2020)

Add to Collection

Article Materials Science, Textiles

Physicochemical and Thermal Properties of Lignocellulosic Fiber from Gigantochloa Scortechinii Bamboo: Effect of Steam Explosion Treatment

Siti Atiqa Al Zahra Mat Darus et al.

FIBERS AND POLYMERS (2020)

Add to Collection

Article Thermodynamics

An overview on the effect of ultrasonication duration on different properties of nanofluids

Asif Afzal et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Materials Science, Composites

Mechanical performance of thermoplastic olefin composites reinforced with coir and sisal natural fibers: Influence of surface pretreatment

Joao F. Pereira et al.

POLYMER COMPOSITES (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Effect of short fibre orientation on the mechanical characterization of a composite material-hybrid fibre reinforced polymer matrix

D. Bino Prince Raja et al.

BULLETIN OF MATERIALS SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Role of ultrasonication duration and surfactant on characteristics of ZnO and CuO nanofluids

Asif Afzal et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection

Article Materials Science, Textiles

Mechanical and Moisture Absorption Characterization of PLA Composites Reinforced with Nano-coated Flax Fibers

Marie Bayart et al.

FIBERS AND POLYMERS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Unmodified and Modified Nanocrystalline Cellulose Reinforced Polylactic Acid (PLA) Polymer Prepared by Solvent Casting Method Morphology, mechanical and thermal properties

Siti Norbaya Kasa et al.

MATERIALE PLASTICE (2017)

Add to Collection

Article Materials Science, Composites

Characterization of high glass transition temperature sugar-based epoxy resin composites with jute and carbon fibre reinforcement

P. Niedermann et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: Effect of woven fabric and random orientation

A. Alavudeen et al.

MATERIALS & DESIGN (2015)

Add to Collection

Review Polymer Science

A Review on Pineapple Leaves Fibre and Its Composites

M. Asim et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)

Add to Collection

Proceedings Paper Nanoscience & Nanotechnology

Thermosetting Polymer and Nano Clay based Natural Fiber BioComposites

K. Deepak et al.

2ND INTERNATIONAL CONFERENCE ON NANOMATERIALS AND TECHNOLOGIES (CNT 2014) (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.