Related references
Note: Only part of the references are listed.Effect of precipitated phases on the mechanical properties and fracture mechanisms of Inconel 718 alloy
Yiting Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)
Effect of NbC inoculants on the elastic properties and microstructure of additively manufactured IN718
J. F. S. Markanday et al.
MATERIALIA (2023)
Dissolution kinetics of Laves phase during homogenization heat treatment of additively manufactured Inconel 718 superalloy
Sajad Ghaemifar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)
Microstructural defects governing torsional fatigue failure of additively manufactured as-built and heat-treated Inconel 718
Sanna F. Siddiqui et al.
ENGINEERING FAILURE ANALYSIS (2023)
Dynamic recrystallization under hot deformation of additively manufactured 316 L stainless steel
F. Khodabakhshi et al.
MATERIALS CHARACTERIZATION (2023)
Superplasticity of a hot rolled Mg-3Zn-0.5RE-0.5Zr (ZEK300) alloy
Zeinab Savaedi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)
Additive manufacturing of nickel-based superalloys: A state-of-the-art review on process-structure-defect-property relationship
Amir Mostafaei et al.
PROGRESS IN MATERIALS SCIENCE (2023)
Precipitation kinetics of niobium carbide (NbC) during homogenization heat treatment of additively manufactured inconel 718 superalloy
Sajad Ghaemifar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)
Defects and anomalies in powder bed fusion metal additive manufacturing
Amir Mostafaei et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2022)
Derivation of material properties using small punch and shear punch test methods
R. J. Lancaster et al.
MATERIALS & DESIGN (2022)
Microstructural evolution and mechanical properties of Inconel 718 alloy manufactured by selective laser melting after solution and double aging treatments
Peikang Bai et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Recrystallization and grain growth kinetics of IN718 manufactured by laser powder bed fusion
Merve Nur Dogu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Effects of homogenization temperature on creep performance of laser powder bed fusion-fabricated Inconel 718 at 650?
Tao Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
A review of various materials for additive manufacturing: Recent trends and processing issues
Manu Srivastava et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Wire and arc additive manufacturing of 316L stainless steel/Inconel 625 functionally graded material: development and characterization
Tiago A. Rodrigues et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
The effect of homogenization temperature on the microstructure and high temperature mechanical performance of SLM-fabricated IN718 alloy
Ming Cao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Precipitation behavior of δ phase and its effect on stress rupture properties of selective laser-melted Inconel 718 superalloy
Shuya Zhang et al.
COMPOSITES PART B-ENGINEERING (2021)
Research status of laser additive manufacturing for metal: a review
Guanghao Gong et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Mechanics of the small punch test: a review and qualification of additive manufacturing materials
Jonathan Torres et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Recrystallization kinetics, mechanisms, and topology in alloys processed by laser powder-bed fusion: AISI 316L stainless steel as example
Leonardo Shoji Aota et al.
MATERIALIA (2021)
Effect of Iron content on the microstructure evolution, mechanical properties and wear resistance of FeXCoCrNi high-entropy alloy system produced via MA-SPS
Parisa Moazzen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Microstructural and mechanical anisotropy of selective laser melted IN718 superalloy at room and high temperatures using small punch test
Ali Rezaei et al.
MATERIALS CHARACTERIZATION (2020)
Sustainability of additive manufacturing: the circular economy of materials and environmental perspectives
Henry A. Colorado et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Comparative study on the microstructure evolution of selective laser melted and wrought IN718 superalloy during subsequent heat treatment process and its effect on mechanical properties
Yanan Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Precipitation kinetics of γ phase and its mechanism in a Nb-bearing nickel-based superalloy during aging
Mohsen Rafiei et al.
VACUUM (2020)
The effect of subsequent heat treatment on the evolution behavior of second phase particles and mechanical properties of the Inconel 718 superalloy manufactured by selective laser melting
Yanan Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Grain boundary and microstructure engineering of Inconel 690 cladding on stainless-steel 316L using electron-beam powder bed fusion additive manufacturing
I. A. Segura et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Heat treatment of Inconel 718 produced by selective laser melting: Microstructure and mechanical properties
Wenpu Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of Nb-C addition on the microstructure and mechanical properties of CoCrFeMnNi high entropy alloys during homogenisation
Erfan Abbasi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Homogenization kinetics of a typical nickel-based superalloy
Mohsen Rafiei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Micro-mechanisms and precipitation kinetics of delta (δ) phase in Inconel 718 superalloy during aging
Mohsen Rafiei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Applicability of shear punch testing to the evaluation of hot tensile deformation parameters and constitutive analyses
Mohammad Javad Esfandyarpour et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
A physically-based model considering dislocation-solute atom dynamic interactions for a nickel-based superalloy at intermediate temperatures
Y. C. Lin et al.
MATERIALS & DESIGN (2019)
A critical evaluation on efficacy of recrystallization vs. strain induced boundary migration in achieving grain boundary engineered microstructure in a Ni-base superalloy
T. S. Prithiv et al.
ACTA MATERIALIA (2018)
High-temperature deformation of delta-processed Inconel 718
Pedro Paramo-Kanetas et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Effects of different heat treatments on the dynamic shear response and shear localization in Inconel 718 alloy
Wei-dong Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and anisotropic manufactured Inconel 718 and effects of post heat treatments
Dunyong Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
The contribution of small punch testing towards the development of materials for aero-engine applications
Roger C. Hurst et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science
Lawrence E. Murr et al.
Journal of Materials Research and Technology-JMR&T (2013)
Correlation between shear punch and tensile measurements for an AZ31 Mg alloy processed by equal-channel angular pressing
S. M. Masoudpanah et al.
KOVOVE MATERIALY-METALLIC MATERIALS (2011)
Evaluation of mechanical properties using shear-punch testing
RK Guduru et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)