☆ 4.5 Article

Mechanical properties of polyamide 12 manufactured by means of SLS: Influence of wall thickness and build direction

MATERIALS RESEARCH EXPRESS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Efficient characterization on the interlayer shear strengths of 3D printing polymers

Qinglin Wang et al.

Summary: This paper presents a combined experimental and numerical investigation of the interlayer shear strength measurement approach for 3D printing materials. The results show that the minimum shear strength of a 3D printing polymer specimen is the interlayer shear strength when the shear force is acting along the printing surface.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Review Materials Science, Multidisciplinary

Necking mechanism under various sintering process parameters-A review

Mohd Rhafiq Mazlan et al.

Summary: The process of sintering involves applying pressure and heat to fuse particles together into a solid mass without melting them. Interparticles necking, or fusion between particles, is important for producing high-density and high-porosity products. Increasing necking size between particles leads to smaller pore sizes and stronger, harder materials. Proper process parameters are required to achieve larger necking growth. This article reviews the effect of powder and processing parameters and discusses different processes such as conventional sintering, microwave sintering, and selective laser melting.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Reinforcement of polyamide 6 with carbon fiber surface modified by a polar cross-linked network interfacial phase

Chengjun Xiao et al.

Summary: Researchers synthesized an epoxy resin emulsifier with hydrophilic ends and lipophilic middle, which increased the surface chemical activity and roughness of the carbon fiber (CF). This improved the interfacial adhesion in CF/polyamide 6 (PA6) composites, resulting in higher tensile strength and impact strength.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Article Engineering, Chemical

Correlating polyamide powder flowability to mechanical properties of parts fabricated by additive manufacturing

Reza Baserinia et al.

Summary: This study investigates the relationships between the flow properties of five blends of polyamide 12 and the mechanical and physical characteristics of the fabricated components, aiming to predict the final product quality.

POWDER TECHNOLOGY (2022)

Add to Collection

Article Polymer Science

Mechanical and Tribological Properties of 3D Printed Polyamide 12 and SiC/PA12 Composite by Selective Laser Sintering

Guoyan Yu et al.

Summary: Polymeric matrix composites, such as the SiC particle-reinforced PA12 matrix composites, have significant implications for industries like automotive and medicine. This study examined the surface topographies, mechanical properties, and tribological properties of the composites. The results showed improved friction and wear resistance compared to the pure PA12 matrix. The wear mechanisms were determined to be abrasive and fatigue modes. The findings suggest that this type of PA12 matrix composite has promising potential for marine and energy applications.

POLYMERS (2022)

Add to Collection

Article Engineering, Manufacturing

An investigation on mechanical properties of PA12 parts produced by a SLS 3D printer: An experimental approach

Milad Khademe Razaviye et al.

Summary: This paper investigates the effects of SLS setting variables on the mechanical properties of polyamide-12 printed parts. The results show that hatch spacing has the greatest impact on mechanical properties, followed by laser power and scan speed. Adjusting these variables can improve the strength, apparent modulus of elasticity, and elongation of the printed parts, but there is a trade-off between economic production and mechanical behavior.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Engineering, Industrial

Additive manufacturing and the COVID-19 challenges: An in-depth study

Md Sarower Tareq et al.

Summary: The rapid spread of SARS-CoV-2 led to a huge demand for medical equipment and PPE, putting unprecedented pressure on healthcare systems. Additive manufacturing (AM) served as a supplementary manufacturing process to meet explosive demands and address supply chain disruptions.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

Add to Collection

Article Polymer Science

Polyamide 12 Materials Study of Morpho-Structural Changes during Laser Sintering of 3D Printing

Grazyna Simha Martynkova et al.

Summary: The morphology and structural properties of polyamide (PA)-12 material used for 3D laser printing were studied using various methods, revealing characteristics such as uneven particle size, crystallinity, and specific surface area of fresh PA12 powder.

POLYMERS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Research status of laser additive manufacturing for metal: a review

Guanghao Gong et al.

Summary: Y Additive manufacturing, particularly laser additive manufacturing, is a novel manufacturing technique that forms layer-by-layer according to geometric model, offering advantages such as rapid prototyping, customization, and forming intricate structures. It is mainly used for metallic materials currently, with certain limitations and challenges, but the future development trends show promise.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Engineering, Manufacturing

Mechanical and Structural Evaluation of the PA12 Desktop Selective Laser Sintering Printed Parts Regarding Printing Strategy

Magdalena Tomanik et al.

Summary: This study evaluated the influence of orientation and diameter of desktop SLS printed parts on their structural and mechanical parameters. It was found that the best mechanical parameters were obtained for parts printed at an angle of 0 degrees in the case of samples subjected to tensile load. Additionally, the diameter of printed elements was proven to have a significant influence on geometric and dimensional representation, with larger sizes showing the best results.

3D PRINTING AND ADDITIVE MANUFACTURING (2021)

Add to Collection

Review Chemistry, Medicinal

Selective laser sintering 3D printing - an overview of the technology and pharmaceutical applications

Naseem A. Charoo et al.

DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)

Add to Collection

Article Engineering, Industrial

Design for additive manufacturing: Framework and methodology

Tom Vaneker et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Manufacturing

In-depth comparison of polyamide 12 parts manufactured by Multi Jet Fusion and Selective Laser Sintering

Stefano Rosso et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Chemistry, Physical

Influence of Manufacturing Parameters on Mechanical Properties of Porous Materials by Selective Laser Sintering

Dan Ioan Stoia et al.

MATERIALS (2019)

Add to Collection

Article Engineering, Chemical

Evaluation of particle coalescence and its implications in laser sintering

L. Benedetti et al.

POWDER TECHNOLOGY (2019)

Add to Collection

Article Engineering, Industrial

A Round Robin study for selective laser sintering of polymers: Back tracing of the pore morphology to the process parameters

Thomas Stichel et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Article Engineering, Manufacturing

Thickness dependency of mechanical properties of laser-sintered polyamide lightweight structures

David Tasch et al.

ADDITIVE MANUFACTURING (2018)

Add to Collection

Article Materials Science, Characterization & Testing

Variability, heterogeneity, and anisotropy in the quasi-static response of laser sintered PA12 components

M. Faes et al.

STRAIN (2017)

Add to Collection

Article Polymer Science

Effect of PA12 powder reuse on coalescence behaviour and microstructure of SLS parts

Sasan Dadbakhsh et al.

EUROPEAN POLYMER JOURNAL (2017)

Add to Collection

Article Optics

A Round Robin study for Selective Laser Sintering of polyamide 12: Microstructural origin of the mechanical properties

Thomas Stichel et al.

OPTICS AND LASER TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Characterization & Testing

On the influence of inter-layer time and energy density on selected critical-to-quality properties of PA12 parts produced via laser sintering

M. Pavan et al.

POLYMER TESTING (2017)

Add to Collection

Article Materials Science, Characterization & Testing

On the visco-elasto-plastic response of additively manufactured polyamide-12 (PA-12) through selective laser sintering

N. Lammens et al.

POLYMER TESTING (2017)

Add to Collection

Article Engineering, Industrial

Using X-ray computed tomography to improve the porosity level of polyamide-12 laser sintered parts

Wim Dewulf et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Characterization & Testing

Detecting surface roughness on SLS parts with various measuring techniques

M. Launhardt et al.

POLYMER TESTING (2016)

Add to Collection

Review Physics, Applied

Review of selective laser melting: Materials and applications

C. Y. Yap et al.

APPLIED PHYSICS REVIEWS (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Laser sintering of polyamides and other polymers

R. D. Goodridge et al.

PROGRESS IN MATERIALS SCIENCE (2012)

Add to Collection

Article Engineering, Chemical

Investigation into the Differences in the Selective Laser Sintering between Amorphous and Semi-crystalline Polymers

C. Yan et al.

INTERNATIONAL POLYMER PROCESSING (2011)

Add to Collection

Article Engineering, Mechanical

Anisotropy, homogeneity and ageing in an SLS polymer

William Cooke et al.

RAPID PROTOTYPING JOURNAL (2011)

Add to Collection

Article Engineering, Mechanical

The effect of process conditions on mechanical properties of laser-sintered nylon

Thomas L. Starr et al.

RAPID PROTOTYPING JOURNAL (2011)

Add to Collection

Article Engineering, Mechanical

Effect of section thickness and build orientation on tensile properties and material characteristics of laser sintered nylon-12 parts

Candice Majewski et al.

RAPID PROTOTYPING JOURNAL (2011)

Add to Collection

Article Engineering, Manufacturing

Investigating mechanical anisotropy and end-of-vector effect in laser-sintered nylon parts

U. Ajoku et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.