Related references
Note: Only part of the references are listed.A Finite Volume Framework for the Simulation of Additive Friction Stir Deposition
K. C. Kincaid et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2023)
Microstructure evolution of 316L stainless steel during solid-state additive friction stir deposition
Hossein Beladi et al.
PHILOSOPHICAL MAGAZINE (2022)
Elucidating the influence of temperature and strain rate on the mechanics of AFS-D through a combined experimental and computational approach
G. G. Stubblefield et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)
Analysis of contact conditions and microstructure evolution in shear assisted processing and extrusion using smoothed particle hydrodynamics method
Lei Li et al.
MATERIALS & DESIGN (2022)
Material flow visualization during friction stir welding using high-speed X-ray imaging
Hemant Agiwal et al.
MANUFACTURING LETTERS (2022)
Tracing plastic deformation path and concurrent grain refinement during additive friction stir deposition
Mackenzie E. J. Perry et al.
MATERIALIA (2021)
Characterization of the fatigue behavior of additive friction stir-deposition AA2219
K. Anderson-Wedge et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Additive friction stir deposition: a deformation processing route to metal additive manufacturing
Hang Z. Yu et al.
MATERIALS RESEARCH LETTERS (2021)
Analysis of contact conditions and its influence on strain rate and temperature in friction stir welding
D. G. Andrade et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Solid-state cladding on thin automotive sheet metals enabled by additive friction stir deposition
W. Douglas Hartley et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Effect of parallel deposition path and interface material flow on resulting microstructure and tensile behavior of Al-Mg-Si alloy fabricated by additive friction stir deposition
B. J. Phillips et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Solid-State Metal Additive Manufacturing for Structural Repair
Ryan B. Gottwald et al.
ACCOUNTS OF MATERIALS RESEARCH (2021)
Solid-state additive manufacturing of aluminum and copper using additive friction stir deposition: Process-microstructure linkages
R. Joey Griffiths et al.
MATERIALIA (2021)
Analysis of material distribution in dissimilar friction stir welded joints of Al 1050 and copper
Nikhil Gotawala et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Microstructure Development in Additive Friction Stir-Deposited Cu
Jonathan L. Priedeman et al.
METALS (2020)
Microstructure-deformation relationship of additive friction stir-deposition Al-Mg-Si
B. J. Phillips et al.
MATERIALIA (2019)
Non-beam-based metal additive manufacturing enabled by additive friction stir deposition
Hang Z. Yu et al.
SCRIPTA MATERIALIA (2018)
Advanced numerical modelling of friction stir welded low alloy steel
Bilal Ahmad et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Potentials and strategies of solid-state additive friction-stir manufacturing technology: A critical review
F. Khodabakhshi et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Challenges in Thermo-mechanical Analysis of Friction Stir Welding Processes
N. Dialami et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2017)
A numerical methodology for predicting tool wear in Friction Stir Welding
A. F. Hasan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Microstructures and mechanical behavior of Inconel 625 fabricated by solid-state additive manufacturing
O. G. Rivera et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Calibration of dynamic tool-workpiece interface temperature measurement during friction stir welding
Joshua Schmale et al.
MEASUREMENT (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
Determination of heat partition between tool and workpiece during FSW of SS304 using 3D CFD modeling
Subrata Pal et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Determination of strain rate in Friction Stir Welding by three-dimensional visualization of material flow using X-ray radiography
Y. Morisada et al.
SCRIPTA MATERIALIA (2015)
A numerical comparison of the flow behaviour in Friction Stir Welding (FSW) using unworn and worn tool geometries
A. F. Hasan et al.
MATERIALS & DESIGN (2015)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
A review of numerical analysis of friction stir welding
Xiaocong He et al.
PROGRESS IN MATERIALS SCIENCE (2014)
A new smoothed particle hydrodynamics non-Newtonian model for friction stir welding: Process modeling and simulation of microstructure evolution in a magnesium alloy
Wenxiao Pan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Coupled Eulerian Lagrangian finite element modeling of friction stir welding processes
Fadi Al-Badour et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties
A. Simar et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Periodic variation of torque and its relations to interfacial sticking and slipping during friction stir welding
J. W. Qian et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2012)
Development of numerical simulation model for FSW employing particle method
G. Yoshikawa et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2012)
Coupled thermo-mechanical model based comparison of friction stir welding processes of AA2024-T3 in different thicknesses
Z. Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Three-dimensional visualization of material flow during friction stir welding by two pairs of X-ray transmission systems
Y. Morisada et al.
SCRIPTA MATERIALIA (2011)
Torque, power requirement and stir zone geometry in friction stir welding through modeling and experiments
A. Arora et al.
SCRIPTA MATERIALIA (2009)
Strains and strain rates during friction stir welding
A. Arora et al.
SCRIPTA MATERIALIA (2009)
A fully coupled thermo-mechanical model of friction stir welding
Z. Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Three-dimensional heat and material flow during friction stir welding of mild steel
R. Nandan et al.
ACTA MATERIALIA (2007)
Numerical simulation of three-dimensional heat transfer and plastic flow during friction stir welding
R Nandan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Thermo-mechanical model with adaptive boundary conditions for friction stir welding of Al 6061
V Soundararajan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Modeling strain hardening and texture evolution in friction stir welding of stainless steel
JH Cho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Influence of particulate reinforcements on 6061 materials in extrusion modeling
EM Herba et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Two-dimensional CFD modelling of flow round profiled FSW tooling
PA Colegrove et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2004)
Finite element modeling of friction stir welding - thermal and thermomechanical analysis
CM Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Thermal modeling of friction stir welding in a moving coordinate system and its validation
M Song et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Three-dimensional modeling of the friction stir-welding process
P Ulysse
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)