☆ 4.6 Article

Structure and Properties of Spark Plasma Sintered SiC Ceramics with Oxide Additives

CRYSTALS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Nano-infiltration and transient eutectic (NITE) joining of SiC ceramics applied for the harsh environments

Hao Zhou et al.

Summary: Nano-Infiltration and Transient Eutectic (NITE) joining technology with AlN-Y2O3 as a sintering additive was successfully developed to expand the application of SiC/SiC joints under extreme conditions. The rheological properties of the slurry and the microstructure evolution of the joints were characterized using rheometer, SEM, EDS, EBSD, and TEM. Mechanical properties were evaluated through room-temperature and high-temperature flexural strength tests, while corrosion resistance was assessed through an immersion test with concentrated nitric acid. The defect-free joining layer consisted of dense alpha-SiC phase, a small amount of YAG(Y3Al5O12) in the grain boundary, and a Y-Al-O glass phase from AlN-Y2O3.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

Add to Collection

Article Chemistry, Physical

Structural-Phase State and Properties of SiC Ceramics Obtained by Ultrasound-Assisted Liquid-Phase Sintering with Eutectic Additives

Madi Abilev et al.

Summary: This study proposes an experimental charge composition for sintering carbide ceramics using additives forming a liquid phase. The results show that the addition of eutectic additives during ultrasound-assisted liquid-phase sintering led to the formation of equiaxed grains with an average size of <= 10 mu m. The resulting material exhibited promising physical and mechanical properties, making it suitable for use as an armored material and for obtaining high-performance materials at lower costs and energy consumption.

SILICON (2023)

Add to Collection

Review Materials Science, Multidisciplinary

A review on additive manufacturing of ceramic matrix composites

Jinxing Sun et al.

Summary: Additive manufacturing (AM) has facilitated the production of highly customized, geometrically complex and functionalized parts in ceramic matrix composites (CMCs), resulting in improved properties and functionality compared to single-phase ceramic components. This article provides a comprehensive review on the capabilities and limitations of various AM techniques for CMCs, with a focus on the reported properties and potentials of AM-manufactured ceramic matrix composites.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Ceramics

Effects of solid solution, grain size and porosity on the thermal conductivity of aluminum- and boron-added porous silicon carbide ceramics with in-situ grain growth

Ying Chung et al.

Summary: The effects of solid solution, grain size, and porosity on the thermal conductivity of aluminum and boron added porous SiC ceramics were investigated. The results showed that the solubility and porosity of the ceramics varied with the type of element added, resulting in different thermal conductivity. Additionally, the grain size was found to influence the thermal conductivity of boron added porous SiC ceramics.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

Add to Collection

Article Materials Science, Ceramics

Low-temperature reactive spark plasma sintering of dense SiC-Ti3SiC2 ceramics

Kirill Podbolotov et al.

Summary: In this study, a new method based on low-temperature reactive spark plasma sintering was developed to produce dense SiC-based ceramics with superior mechanical properties. The controlled formation and decomposition of the in-situ Ti3SiC2 MAX phase enabled the fabrication of engineering ceramics with enhanced compressive strength, elastic modulus, and microhardness. This research has significant potential for practical applications in producing advanced SiC-based ceramics for various purposes and for further understanding and development of high-temperature sintering methods.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of silicon carbide ceramics by combination of slip casting and spark plasma sintering

Soheil Esteki et al.

Summary: In this work, the rheological behavior of silicon carbide (SiC) slurries was optimized to produce 20 mm disc-shaped green bodies with high relative density. The slip-casted SiC green bodies were sintered using spark plasma sintering (SPS) under specific conditions. Different characterization methods were used to analyze the initial powders, green bodies, and sintered samples. The results showed that using B4C powder as a solid phase sintering aid resulted in sintered SiC samples with uniform and dense structures without visible pores, with an optimal percentage of 7 wt%.

MATERIALS CHEMISTRY AND PHYSICS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Rear earth (Re: Sc, Y, and Ce) modified PDCs-SiC ceramics for efficient microwave

Hanjun Wei et al.

Summary: This study investigates the improvement of microwave absorption performance through material micromorphological design. The results show that Re-SiC ceramics prepared using PDCs methods, with the addition of rare earth elements (Sc, Y, Ce), exhibit enhanced microstructural, dielectric, and microwave absorption properties. Specifically, the Sc-SiC ceramics with a well-designed three-dimensional network structure demonstrate superior microwave absorption performance.

MATERIALS CHARACTERIZATION (2022)

Add to Collection

Article Materials Science, Ceramics

Improvement in high-temperature oxidation resistance of SiC nanocrystalline ceramics by doping AlN

Zhijian Li et al.

Summary: Research shows that AlN-doped SiC nanocrystalline ceramics exhibit excellent oxidation resistance, compared to regular SiC ceramics. They can effectively inhibit the crystallization of silica, prevent the grain growth of cristobalite, and ensure the integrity of the oxide scale by healing possible cracks, thereby improving the oxidation resistance.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Microstructure and mechanical properties of spark plasma sintered SiC-B4C gradient ceramics with Al additive

Li Zhang et al.

Summary: The addition of Al significantly improves the mechanical properties of SiC-B4C gradient ceramics, leading to increased microhardness and fracture toughness. The densification kinetics and phase evolution during the sintering process were analyzed for the spark plasma sintered ceramics.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Processing and properties of silica-bonded porous nano-SiC ceramics with extremely low thermal conductivity

Yong-Hyeon Kim et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Advanced ceramic components: Materials, fabrication, and applications

Tunmise Ayode Otitoju et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and characterization of pure SiC ceramics by high temperature physical vapor transport induced by seeding with nano SiC particles

Yuchen Deng et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Fabrication and microstructure of liquid sintered porous SiC ceramics through spark plasma sintering

Piqi Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Chemistry, Physical

Structure and Properties of Metallurgical-grade Silicon

A. M. Zhilkashinova et al.

SILICON (2018)

Add to Collection

Article Materials Science, Ceramics

Effect of grain growth on the thermal conductivity of liquid-phase sintered silicon carbide ceramics

Tae-Young Cho et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Ceramics

Effect of grain growth on electrical properties of silicon carbide ceramics sintered with gadolinia and yttria

Young-Wook Kim et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

Add to Collection

Article Materials Science, Ceramics

Effects of carbon and oxygen on the spark plasma sintering additive-free densification and on the mechanical properties of nanostructured SiC ceramics

B. Lanfant et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

Add to Collection

Article Materials Science, Ceramics

TEM analysis of nanocrystalline SiC ceramics sintered by SPS using Al2O3-TiO2 additive

Yutaka Shinoda et al.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2013)

Add to Collection

Article Nanoscience & Nanotechnology

The high temperature strength of SiC ceramics based on SiO2 nano-colloidal employed

Ki Woo Nam et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.