Related references
Note: Only part of the references are listed.Formation of V2AlC MAX phase by SHS involving magnesium reduction of V2O5
V. I. Vershinnikov et al.
CERAMICS INTERNATIONAL (2023)
Formation of Ti2AlNx MAX phase by Hydride Cycle and SHS methods
A. G. Aleksanyan et al.
CERAMICS INTERNATIONAL (2023)
Structural-phase and tribo-corrosion properties of composite Ti3SiC2/TiC MAX-phase coatings: an experimental approach to strengthening by thermal annealing
B. K. Rakhadilov et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2022)
High-Temperature Synthesis of Mo3Al2C-Based Materials via Combustion of MoO3 + Al + C + Al2O3 Powder Mixtures
D. Yu Kovalev et al.
INORGANIC MATERIALS (2022)
On the formation mechanisms and properties of MAX phases: A review
Zhuo Zhang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
The Synthesis of Cast Materials Based on the MAX Phases in a Cr-Ti-Al-C System
V. A. Gorshkov et al.
RUSSIAN JOURNAL OF NON-FERROUS METALS (2021)
High-temperature synthesis of composite materials based on (Cr, Mn, V)-Al-C MAX phases
Vladimir A. Gorshkov et al.
CERAMICS INTERNATIONAL (2021)
Structure, Morphology, Heat Capacity, and Electrical Transport Properties of Ti3(Al,Si)C2 Materials
Kamil Goc et al.
MATERIALS (2021)
High-Temperature Synthesis of Cast Materials Based on the MAX Phase Cr2AlC Using CaCrO4 + Al + C Mixtures
V. A. Gorshkov et al.
INORGANIC MATERIALS (2020)
Review of MXene electrochemical microsupercapacitors
Qiu Jiang et al.
ENERGY STORAGE MATERIALS (2020)
Synthesis, Structure and Properties of Material Based on V2AlC MAX Phase
V. A. Gorshkov et al.
PHYSICS OF METALS AND METALLOGRAPHY (2020)
Preparation of Ti2AlC and Ti3AlC2MAX Phases by Self-Propagating High-Temperature Synthesis with the Reduction Stage
V. I. Vershinnikov et al.
RUSSIAN JOURNAL OF NON-FERROUS METALS (2020)
High-Temperature Synthesis of Ti-Si-B and Ti-Al-B Composites and Coatings
O. K. Lepakova et al.
INTERNATIONAL JOURNAL OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (2020)
Synthesis of Nb2AlC MAX Phase by SHS Metallurgy
I. D. Kovalev et al.
RUSSIAN JOURNAL OF NON-FERROUS METALS (2020)
High-temperature synthesis of cast materials based on Nb2AlC MAX phase
Pavel A. Miloserdov et al.
CERAMICS INTERNATIONAL (2019)
Investigation of the Composition and Properties of a Cr2AlC MAX Phase-Based Material Prepared by Metallothermic SHS
V. A. Gorshkov et al.
PHYSICS OF METALS AND METALLOGRAPHY (2019)
Applying SHS for the Fabrication of the Ti3SiC2-Ni Composite
A. P. Amosov et al.
RUSSIAN JOURNAL OF NON-FERROUS METALS (2019)
Ti3C2Tx MXene characterization produced from SHS-ground Ti3AlC2
Anna Pazniak et al.
MATERIALS & DESIGN (2019)
Structure Formation in Ti/Ti-Al-C Layered Ceramic Materials Obtained by the Method of Unconfined SHS Compaction
O. A. Averichev et al.
REFRACTORIES AND INDUSTRIAL CERAMICS (2019)
Sol-gel based synthesis and enhanced processability of MAX phase Cr2GaC
Jan Paul Siebert et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
On the Chemical Diversity of the MAX Phases
Maxim Sokol et al.
TRENDS IN CHEMISTRY (2019)
SHS of Ti3SiC2-Based Materials in the Ti-Si-C System: Impact of Silicon Excess
J. Lis et al.
INTERNATIONAL JOURNAL OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (2019)
Effect of Added Molybdenum on Material Properties of Zr2SC MAX Phase Produced by Self-Propagating High Temperature Synthesis
Ryuichi Tomoshige et al.
EXPLOSION SHOCK WAVES AND HIGH STRAIN RATE PHENOMENA (2019)
Effect of Ti3AlC2 precursor on the electrochemical properties of the resulting MXene Ti3C2 for Li-ion batteries
Fanyu Kong et al.
CERAMICS INTERNATIONAL (2018)
Self-propagating high-temperature synthesis of Ti3AlC2 MAX phase from mechanically-activated Ti/Al/graphite powder mixture
Maryam Akhlaghi et al.
CERAMICS INTERNATIONAL (2018)
Structure, morphology and electrical transport properties of the Ti3AlC2 materials
K. Goc et al.
CERAMICS INTERNATIONAL (2018)
Synthesis of the Ti2AlC MAX Phase with a Reduction Step via Combustion of a TiO2 + Mg + Al plus C Mixture
V. I. Vershinnikov et al.
INORGANIC MATERIALS (2018)
Aluminothermic SHS in CaCrO4-Al-C Mixtures under Nitrogen Pressure
P. A. Miloserdov et al.
INTERNATIONAL JOURNAL OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (2018)
High-temperature synthesis of a cast material with a maximum content of the MAX phase Cr2AlC
V. A. Gorshkov et al.
INORGANIC MATERIALS (2017)
X-ray diffraction study of self-propagating high-temperature synthesis in the Zr-Al-C system
D. Yu. Kovalev et al.
RUSSIAN JOURNAL OF INORGANIC CHEMISTRY (2017)
Effects of Al content on formation of TaC, Ta2C, and Ta2AlC by combustion synthesis with aluminothermic reactions
C. L. Yeh et al.
CERAMICS INTERNATIONAL (2017)
Synthesis and microstructure of Ti2AlN ceramic by thermal explosion
Yi Liu et al.
CERAMICS INTERNATIONAL (2017)
Combustion Synthesis of MAX Phase Solid Solution Ti3(Al,Sn)C2
Chun-Liang Yeh et al.
NANO HYBRIDS AND COMPOSITES (2017)
Mechanochemical synthesis mechanism of Ti3AlC2 MAX phase from elemental powders of Ti, Al and C
N. Shahin et al.
ADVANCED POWDER TECHNOLOGY (2016)
Rapid synthesis of Ti2AlN ceramic via thermal explosion
Yi Liu et al.
MATERIALS LETTERS (2015)
Synthesis of Ti3AlC2 by SHS and thermodynamic calculation based on first principles
Chun-Cheng Zhu et al.
RARE METALS (2015)
Effect of Mechanical Activation on Ti3AlC2 Max Phase Formation under Self-Propagating High-Temperature Synthesis
A. Yu. Potanin et al.
EURASIAN CHEMICO-TECHNOLOGICAL JOURNAL (2015)
PROCESSING AND PROPERTIES OF MAX PHASES - BASED MATERIALS USING SHS TECHNIQUE
L. Chlubny et al.
ARCHIVES OF METALLURGY AND MATERIALS (2015)
The difference of synthesis mechanism between Ti3SiC2 and Ti3AlC2 prepared from Ti/M/C (M=Al or Si) elemental powders by SHS technique
H. Y. Sun et al.
CERAMICS INTERNATIONAL (2014)
Growth morphology and microstructural characterization of nonstoichiometric Ti2AlC bulk synthesized by self-propagating high temperature combustion synthesis with pseudo hot isostatic pressing
Yuelei Bai et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Effects of co-reduction of Cr2O3 and V2O5 on combustion synthesis of (Cr1-xVx)2AlC/Al2O3 solid solution composites
C. L. Yeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Thermodynamic predictions for the manufacture of Ti2AlC MAX-phase ceramic by combustion synthesis
T. Thomas et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Formation of M n+1AX n phases in Ti-Cr-Al-C systems by self-propagating high-temperature synthesis
Guo-Bing Ying et al.
RARE METALS (2014)
Manufacture of multipurpose composite and ceramic materials in the combustion regime and high-temperature deformation (SHS extrusion)
A. M. Stolin et al.
THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING (2014)
Formation of MAX solid solutions (Ti,V)2AlC and (Cr,V)2AlC with Al2O3 addition by SHS involving aluminothermic reduction
C. L. Yeh et al.
CERAMICS INTERNATIONAL (2013)
Combustion synthesis of (Ti1-xNbx)2AlC solid solutions from elemental and Nb2O5/Al4C3-containing powder compacts
C. L. Yeh et al.
CERAMICS INTERNATIONAL (2011)
Effects of Al and Al4C3 contents on combustion synthesis of Cr2AlC from Cr2O3-Al-Al4C3 powder compacts
C. L. Yeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Formation of Ti2AlN by Solid-Gas Combustion Synthesis with AlN- and TiN-Diluted Samples in Nitrogen
Chun-Liang Yeh et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2010)
An investigation on formation of Nb2AlC by combustion synthesis of Nb2O5-Al-Al4C3 powder compacts
C. L. Yeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Synthesis of Ti2AlC by laser-induced self-propagating high-temperature sintering
Baoyan Liang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Formation of Ti2AlC0.5N0.5 solid solutions by combustion synthesis of Al4C3-containing samples in nitrogen
C. L. Yeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Synthesis and mechanical properties of nano-layered composite
Guobing Ying et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Formation of Ti3AlC2/Al2O3 and Ti2AlC/Al2O3 composites by combustion synthesis in Ti-Al-C-TiO2 systems
C. L. Yeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Layered Machinable and Electrically Conductive Ti2AlC and Ti3AlC2 Ceramics: a Review
X. H. Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2010)
Synthesis of high-purity polycrystalline MAX phases in Ti-Al-C system through Mechanically Activated Self-propagating High-temperature Synthesis
A. Hendaoui et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)
Effects of TiC and Al4C3 addition on combustion synthesis of Ti2AlC
C. L. Yeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effects of Al content on formation of Ta2AlC by self-propagating high-temperature synthesis
C. L. Yeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effects of using Al4C3 as a reactant on formation of Ti3AlC2 by combustion synthesis in SHS mode
C. L. Yeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Rapid synthesis of bulk Ti2AlC by self-propagating high temperature combustion synthesis with a pseudo-hot isostatic pressing process
Yuelei Bai et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Ceramic nanolaminates - Processing and application
Jerzy Lis et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)
SHS of High-Purity MAX Compounds in the Ti-Al-C System
A. Hendaoui et al.
INTERNATIONAL JOURNAL OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (2008)
Historical Retrospective of SHS: An Autoreview
A. G. Merzhanov et al.
INTERNATIONAL JOURNAL OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (2008)
Layered growth of Ti2AlC and Ti3AlC2 in combustion synthesis
Guanghua Liu et al.
MATERIALS LETTERS (2007)
Self-propagating high-temperature synthesis of Ti3SiC2 from 3Ti+SiC+C reactants
DP Riley et al.
JOURNAL OF MATERIALS SCIENCE LETTERS (2003)
Combustion synthesis of ternary carbide Ti3AlC2 in Ti-Al-C system
ZB Ge et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2003)
Synthesis of dense Ti3SiC2-based ceramics by thermal explosion under pressure
Y Khoptiar et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2003)
Ti2AlC ternary carbide synthesized by thermal explosion
Y Khoptiar et al.
MATERIALS LETTERS (2002)
Self-propagating high-temperature synthesis of Ti3SiC2:: I, ultra-high-speed neutron diffraction study of the reaction mechanism
DP Riley et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2002)
Solid-liquid reaction synthesis of layered machinable Ti3AlC2 ceramic
XH Wang et al.
JOURNAL OF MATERIALS CHEMISTRY (2002)
Preparation of Ti3AlC2 and Ti2AlC by self-propagating high-temperature synthesis
AG Zhou et al.
JOURNAL OF MATERIALS SCIENCE LETTERS (2001)
Share Paper
