☆ 4.6 Article

Fatigue Crack Growth Studies under Mixed-Mode Loading in AISI 316 Stainless Steel

APPLIED SCIENCES-BASEL (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Experimental and Theoretical Study on the Fatigue Crack Propagation in Stud Shear Connectors

Yachuan Kuang et al.

Summary: This study examines the fatigue performance and crack propagation law of stud shear connectors in steel-concrete composite girder bridges. Ten standard push-out specimen tests are conducted to systematically study the fatigue properties, failure mode, dynamic slip-fatigue number curve, cross-sectional characteristics, and residual bearing capacity of the stud specimens. The test results show an increase in the relative value of fatigue crack extension area and a linear decrease in the relative value of residual bearing capacity of the studs. Additionally, an expression for the relationship between fatigue crack depth and residual load-bearing capacity of the stud is proposed based on the theory of fracture mechanics.

MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Numerical Analysis on Fatigue Crack Growth at Negative and Positive Stress Ratios

Abdulnaser M. Alshoaibi et al.

Summary: This study used the finite element method to investigate the influence of stress ratio on fatigue crack propagation behavior within the framework of linear elastic fracture mechanics. Numerical analysis was performed using ANSYS Mechanical R19.2, and mixed mode fatigue simulations were conducted on a modified four-point bending specimen. The results showed that the stress ratio significantly affected both fatigue life and the distribution of von Mises stress.

MATERIALS (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An Abaqus plug-in to simulate fatigue crack growth

Mohammad Malekan et al.

Summary: Fatigue crack propagation is crucial in evaluating the design life of engineering components. This paper introduces a freely distributed plug-in for simulating fatigue crack growth with the commercial FE code Abaqus, covering five different fatigue crack growth models and validated through comparisons with analytical and experimental results. The simplicity and free distribution of the plug-in make it a useful simulation tool for industrial, research, and educational purposes.

ENGINEERING WITH COMPUTERS (2022)

Add to Collection

Article Chemistry, Physical

Fatigue Crack Growth Analysis under Constant Amplitude Loading Using Finite Element Method

Abdulnaser M. Alshoaibi

Summary: This study conducted a numerical analysis of fatigue crack growth using ANSYS Mechanical R19.2, investigated the influence of stress ratio on fatigue life and stress intensity factor, and identified the propagation paths of fatigue cracks.

MATERIALS (2022)

Add to Collection

Article Engineering, Multidisciplinary

3D modelling of fatigue crack growth and life predictions using ANSYS

Abdulnaser M. Alshoaibi et al.

Summary: This study uses ANSYS mechanical APDL 19.2 to predict crack propagation trajectories and fatigue crack growth under constant amplitude loading, and evaluates mixed-mode fatigue life assessment for different configurations of modified compact tension specimen using the Paris law model.

AIN SHAMS ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Finite Element Simulation of a Crack Growth in the Presence of a Hole in the Vicinity of the Crack Trajectory

Abdulnaser M. Alshoaibi et al.

Summary: This paper presents a numerical simulation of crack growth path and stress intensity factors for linear elastic material, investigating the influence of hole positions and pre-crack locations on crack growth direction. The study utilized ANSYS Mechanical R19.2 with SMART technology, which significantly reduces meshing time. Results show that the presence of a hole can cause deviation in crack path, potentially leading to crack arrest.

MATERIALS (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Computational modeling of three-dimensional mixed mode-I/II/III fatigue crack growth problems and experiments

Ali O. Ayhan et al.

Summary: The study conducted experiments and numerical simulations on mixed mode I/II/III fatigue crack growth, evaluating a new 3-D fracture criterion for its applicability in 3-D mixed mode fatigue problems. The developed criterion showed better predictability for crack growth surface under highly mixed mode conditions, reducing deviation from experimental surface compared to other criteria.

COMPUTERS & STRUCTURES (2021)

Add to Collection

Article Mechanics

Use of a rotation-invariant linear strain measure for linear elastic crack propagation calculations

Guido Dhondt et al.

Summary: The classical stress intensity factor concept, based on linear elastic calculations with infinitesimal strains, requires revisions when dealing with structures undergoing large rotations. A new strain measure based on the right stretch tensor is proposed to address this issue, effectively removing the local rotation from the linear strain measure. An example of crack propagation in a rotating beam demonstrates the effectiveness of this method.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Mechanics

Mixed mode fatigue crack growth studies in AISI 316 stainless steel

S. Sajith et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2020)

Add to Collection

Article Engineering, Mechanical

Analysis of fatigue crack growth under mixed mode (I plus II) loading conditions in rail steel using CTS specimen

Grzegorz Lesiuk et al.

ENGINEERING FAILURE ANALYSIS (2020)

Add to Collection

Article Engineering, Mechanical

Numerical analysis of mixed-mode fatigue crack growth of adhesive joints nusing CZM

A. V. M. Rocha et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical Simulation of Mixed-Mode Fatigue Crack Growth for Compact Tension Shear Specimen

Yahya Ali Fageehi et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Numerical Analysis of Fatigue Crack Growth Path and Life Predictions for Linear Elastic Material

Abdulnaser M. Alshoaibi et al.

MATERIALS (2020)

Add to Collection

Article Mechanics

Tetrahedral meshing for a slanted semi-elliptical surface crack at a solid cylinder

S. Teh et al.

ENGINEERING FRACTURE MECHANICS (2020)

Add to Collection

Article Engineering, Mechanical

Experimental investigation and numerical modeling of the fatigue crack growth in friction stir spot welding of lap-shear specimen

A. R. Shahani et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Add to Collection

Article Engineering, Mechanical

Dual boundary element method and finite element method for mixed-mode crack propagation simulations in a cracked hollow shaft

R. Citarella et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)

Add to Collection

Article Engineering, Aerospace

Evaluation of mixed mode-I/II criteria for fatigue crack propagation using experiments and modeling

Oguzhan Demir et al.

CHINESE JOURNAL OF AERONAUTICS (2018)

Add to Collection

Article Mechanics

Mixed-mode fatigue crack growth and life prediction of an automotive adhesive bonding system

Qiuren Chen et al.

ENGINEERING FRACTURE MECHANICS (2018)

Add to Collection

Article Mechanics

Experimental and numerical investigation on fracture behavior of CTS specimen under I-II mixed mode loading

Xin-Ting Miao et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2018)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical investigation of mixed mode I plus II and I plus III fatigue crack growth in S355J0 steel

Dariusz Rozumek et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

Add to Collection

Article Mechanics

A new specimen for mixed mode-I/II fracture tests: Modeling, experiments and criteria development

Oguzhan Demir et al.

ENGINEERING FRACTURE MECHANICS (2017)

Add to Collection

Proceedings Paper Construction & Building Technology

Mixed mode I/II/III fatigue crack growth in S355 steel

D. Rozumek et al.

2ND INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY, ICSI 2017 (2017)

Add to Collection

Article Engineering, Mechanical

A novel mixed-mode brittle fracture criterion for crack growth path prediction under static and fatigue loading

S. H. Sajjadi et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)

Add to Collection

Article Mechanics

Development of fatigue crack growth in real structures

H. A. Richard et al.

ENGINEERING FRACTURE MECHANICS (2008)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical investigations on the influence of the loading direction on the fatigue crack growth

M Sander et al.

INTERNATIONAL JOURNAL OF FATIGUE (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.