☆ 4.6 Article

Parametrical Assessment of Polyacrylamide Polymer Membrane Used for CO2 Post-Combustion Capture

APPLIED SCIENCES-BASEL (2023)

Related references

Note: Only part of the references are listed.

Article Green & Sustainable Science & Technology

Comparative analysis of cryogenic distillation and chemical absorption for carbon capture in integrated natural gas liquefaction processes

Ting He et al.

Summary: Compared to chemical absorption, cryogenic distillation has lower thermal energy consumption and a smaller footprint in carbon capture units. However, it has higher power consumption. This study proposes using the azeotropic properties of ethane-CO2 mixtures for CO2 capture in cryogenic distillation in order to produce cleaner LNG. The study comprehensively compares a single mixed refrigerant LNG process integrated with cryogenic distillation (CD-LNG) or chemical absorption (CA-LNG) in terms of energy, economy, and environment. The results show that the power consumption and exergy destruction of the CA-LNG process are lower than that of the CD-LNG process, but the overall exergy efficiency is higher for the CD-LNG process. Additionally, the total annualized cost and CO2 equivalent emissions are lower for the CD-LNG process compared to the CA-LNG process.

JOURNAL OF CLEANER PRODUCTION (2023)

Add to Collection

Review Engineering, Chemical

A review on the recent advances in composite membranes for CO2 capture processes

Yangyang Dai et al.

Summary: In order to achieve the goal of double carbon, CO2 capture should be carried out in a reasonable and efficient manner. Among the common gas separation technologies, membrane separation technology stands out for its advantages of low consumption, small footprint, and environmental friendliness. However, the high preparation cost of inorganic membranes and the trade-off effect limiting the separation performance of polymer membranes have hindered their development, hence the urgent need for high-performance composite membranes.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Add to Collection

Article Engineering, Chemical

Two-stage membrane-based process utilizing highly CO2-selective membranes for cost and energy efficient carbon capture from coal flue gas: A process simulation study

Huanghe Li et al.

Summary: Membrane technology is a promising strategy for CO2 capture due to its cost and energy efficiency. However, there are limited process designs for highly CO2-selective membranes. This study proposes a two-stage membrane-based process design that utilizes highly CO2-selective membranes for CO2 enrichment and achieves economic carbon capture.

JOURNAL OF MEMBRANE SCIENCE (2023)

Add to Collection

Article Biochemistry & Molecular Biology

Synchronous Design of Membrane Material and Process for Pre-Combustion CO2 Capture: A Superstructure Method Integrating Membrane Type Selection

Zhiqiang Ni et al.

Summary: This paper presents an optimization model based on the superstructure method to determine the best membrane process for CO2 capture. The results show that the combination of different membrane types achieves better results, with a CO2 capture cost reduced to 11.75$/tCO2.

MEMBRANES (2023)

Add to Collection

Article Thermodynamics

Multifunctional carbon aerogels from typha orientalis for applications in adsorption: Hydrogen storage, CO2 capture and VOCs removal

Jiahao Cheng et al.

Summary: Biomass-derived cellulose carbon aerogels with a 3D network structure were synthesized from Typha Orientalis (TO). The TO cellulose carbon aerogels have light mass, super-hydrophobicity, and large specific surface areas, making them suitable for multifunctional adsorbent materials in various applications. The research demonstrates the material's hydrogen storage capacity, CO2 adsorption capacity, and its promising reusability for o-xylene adsorption, indicating its potential for energy storage and environmental protection.

ENERGY (2023)

Add to Collection

Article Thermodynamics

Study on the performance of CO2 capture from flue gas with ceramic and PTFE membrane contactors

Hongming Fu et al.

Summary: This paper investigates the differences in CO2 capture performance between ceramic and PTFE membranes and finds that ceramic membranes exhibit favorable CO2 capture performance under appropriate operating parameters.

ENERGY (2023)

Add to Collection

Review Biochemistry & Molecular Biology

Gas Separation Membrane Module Modeling: A Comprehensive Review

Marcos Da Conceicao et al.

Summary: This paper reviews the modeling of membrane gas separation modules and their use in process simulators. A checklist for membrane module modeling is proposed to guide the development of new gas separation membranes.

MEMBRANES (2023)

Add to Collection

Article Engineering, Chemical

Generalized optimization-based synthesis of membrane systems for multicomponent gas mixture separation

Garry S. P. Taifan et al.

Summary: This paper presents a method for synthesizing membrane systems for the separation of multicomponent gas mixtures using a mixed-integer nonlinear programming (MINLP) model. By employing a richly connected superstructure, different permeator models, and pressure drop equations, good solutions can be obtained.

CHEMICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Energy & Fuels

Methods and Techniques for CO2 Capture: Review of Potential Solutions and Applications in Modern Energy Technologies

Pawel Madejski et al.

Summary: This paper presents and discusses various modern methods and technologies for CO2 capture, along with their principles and examples of existing installations. It also summarizes the current large-scale carbon capture utilization and storage (CCUS) facilities and provides an overview of indicators used to compare and assess CO2 emissions, capture, avoidance, and associated costs.

ENERGIES (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Post-combustion CO2 capture and separation in flue gas based on hydrate technology : A review

Zucheng Cheng et al.

Summary: The review discussed the effects of additives on hydrate formation and proposed future research directions, such as the development of more environmentally friendly thermodynamic additives and process optimization.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Progress in carbon dioxide capture materials for deep decarbonization

Mihrimah Ozkan et al.

Summary: To prevent runaway climate change, carbon neutrality requires the use of carbon capture technologies, such as capturing carbon dioxide from flue gas and the atmosphere. This review summarizes the latest developments in various forms of carbon dioxide capture technologies, including liquid sorbents, solid sorbents, metal-organic frameworks, and diffusion membranes. It presents and compares their potential capture capacities, reaction kinetics, stability, reusability, and discusses alternatives to conventional sorbent regeneration methods.

CHEM (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Parametrization Study for Optimal Pre-Combustion Integration of Membrane Processes in BIGCC

Maytham Alabid et al.

Summary: This study aims to improve CO2 capture technologies and enhance the sustainability of biomass as an energy source. By utilizing three stages of the polymer membrane process, the efficiency of CO2 capture can be effectively increased.

SUSTAINABILITY (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Research progress on CO2 capture and utilization technology

Lipei Fu et al.

Summary: This paper reviews the current status of CO2 capture technologies, introduces CO2 utilization technologies, and summarizes the advantages and disadvantages of different methods, providing ideas and references for addressing the CO2 issue.

JOURNAL OF CO2 UTILIZATION (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Solvents for Membrane-Based Post-Combustion CO2 Capture for Potential Application in the Marine Environment

Theodoros Damartzis et al.

Summary: Carbon capture on-board ships is an important technological measure for the shipping industry to reduce greenhouse gas emissions. This study comprehensively evaluates different solvents for post-combustion CO2 capture and finds that no solvent can meet all shipping requirements efficiently. However, widely used solvents like secondary amines show good compatibility with most requirements, while newly developed molecules like phase change solvents and ionic liquids have potential when reaching the same level of technological maturity. This highlights the need for further research on tailor-made and performance-targeted solvents.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Engineering, Chemical

Analysis and optimal design of membrane processes for flue gas CO2 capture

Qinghua Li et al.

Summary: This paper analyzes the application of membrane separation technology in CO2 capture and proposes strategies to reduce energy consumption and capture cost. The presence of water vapor can enhance CO2 transport driving force and decrease membrane area and capture cost.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Environmental Sciences

Sustainability Enhancement of Fossil-Fueled Power Plants by Optimal Design and Operation of Membrane-Based CO2 Capture Process

Javad Asadi et al.

Summary: This study aims to develop optimal membrane-based carbon capture systems to enhance the sustainability of fossil-fuel power plants. The multi-stage membrane process is modeled and optimized, and the effects of operating and design parameters are investigated. The results show a significant decrease in CO2 capture cost and enhanced CO2 removal with increasing CO2 concentration in the feed gas.

ATMOSPHERE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Analysis of Technologies for Carbon Dioxide Capture from the Air

Grazia Leonzio et al.

Summary: The increase in CO2 concentration in the atmosphere has led to the development of negative emissions technologies, such as direct air capture (DAC). DAC technology can directly capture CO2 from the atmosphere, allowing for long-term removal and short-term closed carbon cycles through storage and utilization for chemical processes. Absorption and adsorption are the most studied technologies, but others are also being investigated. Efforts should be made to reduce costs and improve efficiency for large-scale DAC development, while addressing social concerns.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Permeation of Ternary Mixture Containing H2S, CO2 and CH4 in Aquivion® Perfluorosulfonic Acid (PFSA) Ionomer Membranes

Virginia Signorini et al.

Summary: The Aquivion (R) E87-12S membrane material has shown promising separation performance for natural gas sweetening from CO2 and H2S due to its chemical and mechanical stability, especially in humid environments. The permeation behavior of the H2S/CO2/CH4 ternary mixture through this membrane was found to be dependent on water activity and temperature, with the membrane showing higher permeability to H2S compared to CO2 and CH4.

MEMBRANES (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Critical Assessment of Membrane Technology Integration in a Coal-Fired Power Plant

Maytham Alabid et al.

Summary: This paper analyzed the technical and economic integration of spiral wound membranes in a coal-fired power plant. The study found that using two serialized stages can achieve high efficiency and high CO2 purity in capturing process, while decreasing the overall plant efficiency and increasing the levelized cost of electricity.

MEMBRANES (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Insight and Comparison of Energy-efficient Membrane Processes for CO2 Capture from Flue Gases in Power Plant and Energy-intensive Industry

Xuezhong He et al.

Summary: Membrane systems for CO2 capture are gaining popularity due to their energy efficiency, smaller footprint, and lower environmental impact. This study focused on the design insight and comparison of different membranes for various post-combustion CO2 capture scenarios. It was found that Polaris and PolyActive membranes were cost-effective for capturing high-content CO2. Membrane systems are recommended for deployment in energy-intensive industries and operated at a moderate CO2 capture ratio of 70-80% for economic benefits.

CARBON CAPTURE SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Thermodynamics

Cycling of coal fired power plants: A generic CO2 emissions factor model for predicting CO2 emissions

P. U. Akpan et al.

Summary: This paper discusses the application of a V-TCHR model to determine the CO2 emissions factor of coal-fired power plants at various load conditions. A demonstration study was carried out to investigate CO2 emission characteristics at part load of six hypothetical CFPPs, showing promising results. The variable emissions factor model presented in this study is useful to energy modellers as it does not require detailed plant models and can be applied to any hypothetical CFPP-based energy system.

ENERGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Optimisation of post-combustion carbon dioxide capture by use of a fixed site carrier membrane

Natsayi Chiwaye et al.

Summary: This study presents a mathematical model for CO2 capture using a fixed site carrier membrane, with the application of water vapor as sweep gas found to be more economical. The model also results in a decrease in membrane area requirement and a reduction in the cost of CO2 capture.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2021)

Add to Collection

Article Thermodynamics

Techno-economic analysis of membrane-based processes for flexible CO2 capturing from power plants

Javad Asadi et al.

Summary: This study conducted a comprehensive evaluation of membrane separation processes for carbon capture systems, revealing that considering sweep gas and increasing CO2 concentration can reduce energy consumption.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Engineering, Chemical

On optimisation of N2 and CO2-selective hybrid membrane process systems for post-combustion CO2 capture from coal-fired power plants

Natsayi Chiwaye et al.

Summary: The study introduces a superstructure-based optimisation model for the CO2 capture process using N-2-selective and CO2-selective membranes. By automatically selecting membranes for each stage, a hybrid membrane CO2 capture process is achieved, leading to significant reduction in capture cost.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Thermodynamics

Techno-economic and environmental implications of decarbonization process applied for Romanian fossil-based power generation sector

Calin-Cristian Cormos et al.

Summary: This study estimates the technical, economic and environmental impact of decarbonization strategy on Romanian fossil power generation sector. The research shows that decarbonization of Romanian fossil-fired electricity plants can increase overall energy efficiency and reduce the cost of electricity, but the investment effort to replace all fossil fleet with new modern units is foreseen to be substantial.

ENERGY (2021)

Add to Collection

Article Energy & Fuels

Assessment of Hybrid Solvent-Membrane Configurations for Post-Combustion CO2 Capture for Super-Critical Power Plants

Calin-Cristian Cormos et al.

Summary: This study evaluates various hybrid solvent-membrane configurations for CO2 capture in power plants, and finds that the configuration with the membrane unit located at the top of the absorption column performs better in increasing the overall net plant efficiency.

ENERGIES (2021)

Add to Collection

Article Urban Studies

China's Efforts to Peak Carbon Emissions: Targets and Practice

Ying CAO et al.

Summary: China aims to peak CO2 emissions before 2030 and emphasizes the importance of regional participation. Regions need to set realistic targets and paths, improve their basic capabilities, and enhance overall coordination while achieving carbon emissions peak. China should provide macro-guidance to regions in terms of top-level design, mechanisms improvement, and overall coordination.

CHINESE JOURNAL OF URBAN AND ENVIRONMENTAL STUDIES (2021)

Add to Collection

Article Engineering, Chemical

Hybrid membrane process for post-combustion CO2 capture from coal-fired power plant

Li-Xuan Ren et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Engineering, Chemical

CO2 capture in a hollow fiber membrane contactor coupled with ionic liquid: Influence of membrane wetting and process parameters

Sohaib Qazi et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Review Energy & Fuels

Carbon Capture From Flue Gas and the Atmosphere: A Perspective

Xiaoxing Wang et al.

FRONTIERS IN ENERGY RESEARCH (2020)

Add to Collection

Proceedings Paper Biotechnology & Applied Microbiology

Estimating glucose diffusion coefficient of membranes for tissue engineering applications using Fick's First Law

D. N. H. Pg Sulaiman et al.

5TH INTERNATIONAL CONFERENCE OF CHEMICAL ENGINEERING AND INDUSTRIAL BIOTECHNOLOGY (ICCEIB 2020) (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Polymeric Membranes with Selective Solution-Diffusion for Intercepting Volatile Organic Compounds during Solar-Driven Water Remediation

Dianpeng Qi et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Post-combustion CO2 capture with membrane process: Practical membrane performance and appropriate pressure

Jiayou Xu et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Thermodynamics

Process design and optimization of MEA-based CO2 capture processes for non-power industries

Jaeuk Choi et al.

ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of Novel Heteroatom-Doped Porous-Organic Polymers as Environmentally Efficient Media for Carbon Dioxide Storage

Hind A. Satar et al.

APPLIED SCIENCES-BASEL (2019)

Add to Collection

Review Engineering, Chemical

Approaches to Suppress CO2-Induced Plasticization of Polyimide Membranes in Gas Separation Applications

Moli Zhang et al.

PROCESSES (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Energy efficiency improvements of post-combustion CO2 capture based on reactive gas-liquid absorption applied for super-critical circulating fluidized bed combustion (CFBC) power plants

Ana-Maria Cormos et al.

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2018)

Add to Collection

Review Engineering, Chemical

Recent advances in polymeric membranes for CO2 capture

Yang Han et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2018)

Add to Collection

Article Engineering, Chemical

Optimization of multistage membrane gas separation processes. Example of application to CO2 capture from blast furnace gas

Alvaro A. Ramirez-Santos et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Article Engineering, Chemical

Nanotube-reinforced facilitated transport membrane for CO2/N2 separation with vacuum operation

Yang Han et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Review Green & Sustainable Science & Technology

A review of material development in the field of carbon capture and the application of membrane-based processes in power plants and energy-intensive industries

Xuezhong He

ENERGY SUSTAINABILITY AND SOCIETY (2018)

Add to Collection

Article Engineering, Chemical

Membrane separation process for CO2 capture from mixed gases using TR and XTR hollow fiber membranes: Process modeling and experiments

Sunghoon Lee et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Add to Collection

Proceedings Paper Green & Sustainable Science & Technology

Pilot demonstration -reporting on CO2 capture from a cement plant using hollow fiber process

M-B Hagg et al.

13TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-13 (2017)

Add to Collection

Article Engineering, Environmental

Membrane system design and process feasibility analysis for CO2 capture from flue gas with a fixed-site-carrier membrane

Xuezhong He et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Article Energy & Fuels

Two-Stage Membrane System for Post-combustion CO2 Capture Application

Arshad Hussain et al.

ENERGY & FUELS (2015)

Add to Collection

Article Engineering, Chemical

Extended flue gas trials with a membrane-based pilot plant at a one-ton-per-day carbon capture rate

Lloyd S. White et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

Add to Collection

Proceedings Paper Chemistry, Applied

Energy Efficient Process for CO2 Capture from Flue gas with Novel Fixed-site-carrier Membranes

Xuezhong He et al.

12TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-12 (2014)

Add to Collection

Proceedings Paper Chemistry, Applied

Hybrid membrane-absorption CO2 capture process

Brice Freeman et al.

12TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-12 (2014)

Add to Collection

Article Engineering, Chemical

Simulation of membrane-based CO2 capture in a coal-fired power plant

Pinghai Shao et al.

JOURNAL OF MEMBRANE SCIENCE (2013)

Add to Collection

Article Engineering, Chemical

Separation performance of PVAm composite membrane for CO2 capture at various pH levels

Taek-Joong Kim et al.

JOURNAL OF MEMBRANE SCIENCE (2013)

Add to Collection

Article Chemistry, Physical

Highly permeable membrane materials for CO2 capture

Qiang Fu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Add to Collection

Article Engineering, Chemical

Membrane processes for carbon capture from coal-fired power plant flue gas: A modeling and cost study

Kartik Ramasubramanian et al.

JOURNAL OF MEMBRANE SCIENCE (2012)

Add to Collection

Review Thermodynamics

Recent developments in membrane-based technologies for CO2 capture

Patricia Luis et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2012)

Add to Collection

Review Biochemistry & Molecular Biology

Membranes for Environmentally Friendly Energy Processes

Xuezhong He et al.

MEMBRANES (2012)

Add to Collection

Article Engineering, Chemical

Hollow fiber carbon membranes: Investigations for CO2 capture

Xuezhong He et al.

JOURNAL OF MEMBRANE SCIENCE (2011)

Add to Collection

Article Engineering, Chemical

Multi-stage gas separation membrane processes used in post-combustion capture: Energetic and economic analyses

Li Zhao et al.

JOURNAL OF MEMBRANE SCIENCE (2010)

Add to Collection

Article Engineering, Chemical

Composite hollow fiber membranes for CO2 capture

Marius Sandru et al.

JOURNAL OF MEMBRANE SCIENCE (2010)

Add to Collection

Article Environmental Sciences

GHG EMISSIONS EVALUATION FROM FOSSIL FUEL WITH CCS

Cristian Dinca et al.

ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL (2009)

Add to Collection

Article Engineering, Chemical

The upper bound revisited

Lloyd M. Robeson

JOURNAL OF MEMBRANE SCIENCE (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.