☆ 4.5 Article

On the Prediction of the Mechanical Properties of Limestone Calcined Clay Cement: A Random Forest Approach Tailored to Cement Chemistry

MINERALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Predicting Compressive Strength and Hydration Products of Calcium Aluminate Cement Using Data-Driven Approach

Sai Akshay Ponduru et al.

Materials (2023)

Add to Collection

Review Construction & Building Technology

Predictive models for concrete properties using machine learning and deep learning approaches: A review

Mohammad Mohtasham Moein et al.

Summary: Concrete is widely used in civil engineering and its mechanical properties are important for design and evaluation. Machine learning and deep learning have been applied to predict these properties, offering advantages such as accuracy and responsiveness. This paper reviews successful applications of ML and DL models and provides suggestions for future research.

JOURNAL OF BUILDING ENGINEERING (2023)

Add to Collection

Article Computer Science, Artificial Intelligence

Predicting Dissolution Kinetics of Tricalcium Silicate Using Deep Learning and Analytical Models

Taihao Han et al.

Summary: The dissolution kinetics of tricalcium silicate (C3S) in undersaturated solvents can be accurately predicted using the deep forest (DF) model, which takes into account various variables such as measurement method, temperature, and physicochemical properties of solvents.

ALGORITHMS (2023)

Add to Collection

Article Construction & Building Technology

Deep learning to predict the hydration and performance of fly ash-containing cementitious binders

Taihao Han et al.

Summary: This study uses a deep forest model to predict the composition- and time-dependent hydration kinetics and compressive strength of [PC + FA] binders. Data dimensionality-reduction and segmentation techniques are employed to enhance the model's prediction performance, and a simple analytical model is developed to predict compressive strength and reveal the correlations between mixture design and compressive strength of [PC + FA] binders.

CEMENT AND CONCRETE RESEARCH (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Performance assessment of limestone calcined clay cement (LC3)-Based lightweight green mortars incorporating recycled waste aggregate

Hussam Alghamdi et al.

Summary: This study focuses on lightweight limestone-calcined clay cement (LC3) containing expanded hollow perlite waste as fine aggregate. By replacing 60% of the weight of White Portland Cement (WPC), LC3-based mortars with expanded hollow perlite waste were prepared. The addition of expanded hollow perlite waste can reduce the thermal conductivity of the mortar, improve the lightweight properties, and maintain structural strength after fire exposure for a certain period of time.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Article Chemistry, Physical

Calcined nanosized tubular halloysite for the preparation of limestone calcined clay cement (LC3)

Ting Yu et al.

Summary: This study investigated the possibility of using calcined clay and limestone as partial replacements for ordinary Portland cement (OPC) in the preparation of limestone calcined clay cement (LC3). The results showed that LC3 had higher compressive strength and a compact microstructure compared to OPC. However, excessive replacement ratio weakened the mechanical properties due to the inhomogeneous microstructure.

APPLIED CLAY SCIENCE (2023)

Add to Collection

Article Construction & Building Technology

Mechanical Performance and Physico-Chemical Properties of Limestone Calcined Clay Cement (LC3) in Malawi

Innocent Kafodya et al.

Summary: Malawi, one of the least-developed countries in Sub-Saharan Africa, has poor housing infrastructure susceptible to disasters due to low-quality construction materials. This study investigates the use of limestone calcined clay cement (LC3) as a resilient and cost-effective alternative. The strength and physico-chemical properties of LC3 systems with different clinker contents were examined, showing that LC3 can be manufactured using local clays and limestone in Malawi. LC3-50 samples exhibited high strength, meeting the requirements for pozzolanic cementitious materials, while LC3-40 samples conform to the strength requirements for masonry cements. This work highlights the potential of LC3 as a sustainable construction material for mitigating carbon emissions and boosting the local economy.

BUILDINGS (2023)

Add to Collection

Article Construction & Building Technology

Performance enhancement and characterization of limestone calcined clay cement (LC3) produced with low-reactivity kaolinitic clay

Rotana Hay et al.

Summary: This study examined the use of calcined low-reactivity kaolinitic clay (LRKC) in the formulation of LC3. The addition of LRKC and limestone powder (LP) increased the heat evolution in LC3 mixes due to filler effects. The presence of hemihydrate delayed the formation of aluminate phases, resulting in more ettringite formation. The best-performing LC3 mix exhibited a 12.3% lower strength compared to the reference mix, and the strength of all LC3 mixes converged regardless of limestone content and fineness.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Spatial correlation and pore morphology analysis of limestone calcined clay cement (LC3) via machine learning and image-based characterisation

Hao Sui et al.

Summary: Understanding the microstructure of LC3 is crucial for controlling cement properties. This study employs deep learning and image-based characterisation to investigate the spatial correlation and pore morphology of LC3, revealing its microstructural refinement effects. The findings highlight the lower probability of connected pores but higher likelihood of connected solid particles in LC3 compared to OPC, as well as a smaller RVE size and increased packing density. The analysis also demonstrates a higher hydration rate and pore deformation in LC3. These results provide insights into the microstructural mechanisms of LC3 and offer a foundation for localised characterisation of cementitious materials.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Optimization of mechanical performance of limestone calcined clay cement: Effects of calcination temperature of nanosized tubular halloysite, gypsum content, and water/binder ratio

Ting Yu et al.

Summary: This study evaluates the effects of the calcination temperature of halloysite, gypsum content, and water/binder (W/B) ratio on the properties of LC3. The results show that halloysite calcined at 650-850 degrees C exhibits high pozzolanic activity, and LC3 prepared with higher calcination temperatures has shorter setting times and higher compressive strengths. Additionally, an appropriate amount of gypsum and lower W/B ratio improve the performance of LC3. Overall rating: 8 points.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Machine Learning-Based Prediction of the Compressive Strength of Brazilian Concretes: A Dual-Dataset Study

Vitor Pereira Silva et al.

Summary: Recently, several machine learning techniques have been used in civil engineering to predict the properties of concrete using component properties. This study used an artificial neural network to determine the compressive strength of Brazilian concrete by comparing it with a reference database. The results showed that combining the Brazilian and reference datasets as training and test sets led to a better predictive model than using them separately.

MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Interpretable Predictive Modelling of Basalt Fiber Reinforced Concrete Splitting Tensile Strength Using Ensemble Machine Learning Methods and SHAP Approach

Celal Cakiroglu et al.

Summary: This study applies ensemble learning techniques to predict the splitting tensile strength of concrete reinforced with basalt fibers. The XGBoost algorithm achieves a coefficient of determination greater than 0.9, and the impact of input features on the prediction is visualized using the SHAP algorithm and ICE plots.

MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Machine learning-based prediction of compressive strength for limestone calcined clay cements

Yassine El Khessaimi et al.

Summary: In this study, machine learning algorithms were used to predict the performance of calcined clay cement. It was found that the alumina-to-silica ratio significantly impacts cement strength, and a decrease in strength above 920 degrees C was predicted. The ML model not only confirmed previous experimental findings but also identified potential formulations for further experimentation. It is important to note that the carbon footprint predicted by the ML model requires a comprehensive life cycle assessment.

JOURNAL OF BUILDING ENGINEERING (2023)

Add to Collection

Article Construction & Building Technology

Evaluation of the thermo-physical, mechanical, and fire resistance performances of limestone calcined clay cement (LC3)-based lightweight rendering mortars

Ahmed M. Seddik Hassan et al.

Summary: In this study, Limestone-calcined clay cement (LC3) was developed to improve the thermal properties of building's rendering mortar. The LC3-mortars showed good thermal insulation performance and low carbon footprint by incorporating lightweight aggregates. The mortar with expanded perlite exhibited the lowest thermal conductivity and the highest thermal mass.

JOURNAL OF BUILDING ENGINEERING (2023)

Add to Collection

Review Construction & Building Technology

Model for predicting compressive strength and elastic modulus of recycled concrete made with treated coarse aggregate: Empirical approach

Eric A. Ohemeng et al.

Summary: The present study found that recycled concrete made with treated CRCAs using the AMF technique generally exhibited better properties compared to the AMR approach. Both AMR and AMF treatment methods improved the compressive strength values of the recycled concrete, with AMF showing a greater enhancement of 23.3%. However, the AMF approach was determined to be more costly. The proposed model for predicting the properties of treated CRCAs in recycled concrete proved to be effective and can be used in the design of sustainable concrete structures.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Materials Science, Ceramics

Machine learning enabled closed-form models to predict strength of alkali-activated systems

Taihao Han et al.

Summary: In this study, a machine learning model is used to predict the compressive strength of AAMs based on their initial physicochemical attributes. The prediction performance of the model is improved by combining multiple compositional descriptors of the aluminosilicate into a composite chemostructural descriptor.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Add to Collection

Review Materials Science, Multidisciplinary

A Deep Learning Approach to Design and Discover Sustainable Cementitious Binders: Strategies to Learn From Small Databases and Develop Closed-form Analytical Models

Taihao Han et al.

Summary: This study presents a deep learning model that can predict the hydration kinetics and phase assemblage development of supplementary cementitious materials in concrete. Unlike traditional computational models, this model can learn composition-property correlations from a small database, while also ensuring compliance with fundamental materials laws.

FRONTIERS IN MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Prediction of concrete strengths enabled by missing data imputation and interpretable machine learning

Gideon A. Lyngdoh et al.

Summary: This paper discusses the prediction of the non-linear composition-strength relationship in concretes using machine learning. It addresses the challenges of incomplete datasets and the complexity in interpreting results. The developed approach combines data imputation, machine learning, and data interpretation to evaluate the composition-strength relationship in concrete efficiently.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Review Construction & Building Technology

A critical review on compressive behavior and empirical constitutive models of concrete

Xue Ouyang et al.

Summary: This paper reviews the compressive behavior and empirical constitutive models of concrete with strength in the range from 20 to 200 MPa. The characteristics of compressive stress-strain curves and their influential factors are discussed. A general equation for concrete with different strengths is proposed.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Predicting compressive strength of alkali-activated systems based on the network topology and phase assemblages using tree-structure computing algorithms

Rohan Bhat et al.

Summary: This study employs a random forest model with two constraints to predict the compressive strength of alkali-activated systems. It shows that the model can provide highly reliable predictions. The topological network constraint provides the chemostructural properties and reactivity of the precursors, while the thermodynamic constraint estimates the phase assemblages at different degrees of reaction.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Strengthening the performance of limestone-calcined clay cement (LC3) using nano silica

Run-Sheng Lin et al.

Summary: Adding nano silica can significantly enhance the compressive strength, accelerate hydration reaction, refine microstructure, and improve durability and carbonation resistance of LC3 cement mixtures.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Materials Science, Ceramics

Predicting mechanical properties of ultrahigh temperature ceramics using machine learning

Taihao Han et al.

Summary: This study uses machine learning models to predict the mechanical properties of ultrahigh temperature ceramics and develops a simplified prediction model based on the ranking of input variables. The results show that data-driven numerical models can accelerate the development of ultrahigh temperature ceramics.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Add to Collection

Review Chemistry, Physical

Machine learning in concrete science: applications, challenges, and best practices

Zhanzhao Li et al.

Summary: Concrete science has made progress, but concrete formulation remains challenging. Machine learning has transformative potential and has been widely used in concrete research. It is necessary to understand methodological limitations and formulate best practices to fully exploit the capabilities of machine learning models.

NPJ COMPUTATIONAL MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Relating LC3 microstructure, surface resistivity and compressive strength development

Ogulcan Canbek et al.

Summary: The relationship between surface resistivity and strength development was investigated in LC3 formulations, with a strong logarithmic correlation found. The resistivity and strength can both be predicted by the portlandite consumption, allowing for the prediction of later-age strength based on early-age resistivity and portlandite consumption.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Predicting the rheology of limestone calcined clay cements (LC3): Linking composition and hydration kinetics to yield stress through Machine Learning

Ogulcan Canbek et al.

Summary: This study investigates the rheological properties and hydration kinetics parameters of LC3 to understand the yield stress and its influencing factors. By using machine learning models and kernel smoothing methods, four significant predictors were identified and an important LC3 yield stress prediction model was established.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Performance of limestone-calcined clay cement mortar incorporating high volume ferrochrome waste slag aggregate

H. Shoukry et al.

Summary: This study investigates the effects of high dosage of ferrochrome (FeCr) slag aggregates on the mechanical performance and physical properties of Limestone Calcined Clay Cement (LC3) - based mortar. The results show that the water-binder ratio, compressive strength, and tensile strength of the mortar increase with the increase of FeCr replacement ratio. Moreover, the complete replacement of sand with FeCr aggregate reduces the water absorption and minimizes the leaching of chromium and heavy metals due to the improved microstructure.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Cement substitution with secondary materials can reduce annual global CO2 emissions by up to 1.3 gigatons

Izhar Hussain Shah et al.

Summary: Population and development trends will drive the growth of cement production, but the availability of traditional secondary cementitious materials is declining. By maximizing the use of these materials to substitute for cement clinker, a significant reduction in CO2 emissions can be achieved. Most cement-producing countries have the potential to locally generate and use these materials as substitutes for cement clinker.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Construction & Building Technology

The study of effect of carbon nanotubes on the compressive strength of cement-based materials based on machine learning

Yue Li et al.

Summary: Machine learning was used to predict the compressive strength of cement-based materials mixed with carbon nanotubes, and the optimal parameters of the nanotubes were determined. The results showed that the random forest and extreme gradient boosting models performed well in predicting the compressive strength, and the content and diameter of the nanotubes had significant effects on the strength.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Compressive Strength Prediction of Fly Ash Concrete Using Machine Learning Techniques

Yimin Jiang et al.

Summary: This study proposes four machine learning models to predict the compressive strength of fly ash concrete. By comparing the prediction results and analyzing the importance of input variables on the output strength, the optimized hybrid model shows the best predictive behavior. This study provides a feasible method to save costs before conducting laboratory tests.

BUILDINGS (2022)

Add to Collection

Article Construction & Building Technology

Experimental studies on hydration-strength-durability of limestone-cement-calcined Hwangtoh clay ternary composite

Run-Sheng Lin et al.

Summary: This study presents multiple experimental studies on the hydration, strength, and durability properties of ternary or binary composites incorporating calcined Hwangtoh clay and limestone powder. The experimental results indicate that the ternary composite with a 15% replacement level provides the most optimal mixture, and a 30% replacement level is the threshold level for achieving a similar strength as plain concrete. The study also shows a linear relationship between strength and combined water, as well as the synergic relation between calcined clay and limestone in the ternary composite.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Performance of mortar incorporating calcined marine clays with varying kaolinite content

Anjaneya Dixit et al.

Summary: This study explores the feasibility of using low-grade kaolinite clays as supplementary cementitious materials, finding that while they may lead to a decrease in strength, they exhibit significant improvement in corrosion resistance. The pozzolanic nature of the clays was studied using various methods, and their effect on corrosion resistance was examined with electrical resistivity and rapid chloride penetration tests. Overall, the results suggest that low-grade marine clays could serve as a viable alternative to replace cement, resulting in sustainable and low carbon concrete.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Construction & Building Technology

Machine learning to predict properties of fresh and hardened alkali-activated concrete

Eslam Gomaa et al.

Summary: This study introduces a random forest model to predict two important properties of fly ash-based AACs, providing high fidelity predictions of new AACs and quantitatively assessing the influence of physiochemical attributes and process parameters on AAC properties, offering a new pathway for optimization of AAC properties.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Review Construction & Building Technology

Limestone calcined clay cement and concrete: A state-of-the-art review

Meenakshi Sharma et al.

Summary: This article reviews the latest literature on limestone calcined clay cement (LC3), discussing its background, chemistry, production, influence of raw materials and production conditions, mixture design, mechanical and durability properties, as well as economic and environmental aspects. Suggestions for further research are also provided at the end of the paper.

CEMENT AND CONCRETE RESEARCH (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Decarbonizing the cementitious materials cycle: A whole-systems review of measures to decarbonize the cement supply chain in the UK and European contexts

Sarah Pamenter et al.

Summary: This paper reviews measures to achieve net-zero greenhouse gas emissions in the cementitious materials cycle, finding significant decarbonization potential along the cycle, but also highlighting areas where further research is needed.

JOURNAL OF INDUSTRIAL ECOLOGY (2021)

Add to Collection

Article Materials Science, Ceramics

Analytical model of the network topology and rigidity of calcium aluminosilicate glasses

Kai Yang et al.

Summary: The study presents an analytical model derived from classical molecular dynamics simulations to describe the topology of the calcium aluminosilicate ternary system. This model can determine the rigidity state of CAS systems based on composition and temperature, revealing correlations between network topology and glass-forming ability. Glass-forming ability is suggested to be encoded in the network topology of the liquid state rather than the glassy state.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Machine Learning Enabled Models to Predict Sulfur Solubility in Nuclear Waste Glasses

Xinyi Xu et al.

Summary: The U.S. Department of Energy is considering implementing the direct feed approach for the vitrification of low-activity waste and high-level waste at the Hanford site in Washington state, aiming to address the limitations of existing empirical models using artificial intelligence. Through training machine learning models with a large database of glass compositions, two analytical models with different complexity levels have been developed to predict sulfate solubility in waste glasses accurately, surpassing the current state-of-the-art.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Civil

Failure mode and effects analysis of RC members based on machine-learning-based SHapley Additive exPlanations (SHAP) approach

Sujith Mangalathu et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Chemistry, Physical

Portland Cements with High Content of Calcined Clay: Mechanical Strength Behaviour and Sulfate Durability

Carlos H. Aramburo et al.

MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

A numerical approach for designing composite cements with calcined clay and limestone

Sreejith Krishnan et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Review Construction & Building Technology

Machine learning prediction of mechanical properties of concrete: Critical review

Wassim Ben Chaabene et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Deciphering the atomic genome of glasses by topological constraint theory and molecular dynamics: A review

Mathieu Bauchy

COMPUTATIONAL MATERIALS SCIENCE (2019)

Add to Collection

Article Materials Science, Ceramics

The role of the network-modifier's field-strength in the chemical durability of aluminoborate glasses

Tandre Oey et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)

Add to Collection

Article Construction & Building Technology

Influence of supplementary cementitious materials on the sustainability parameters of cements and concretes in the Indian context

R. Gettu et al.

MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Comparison of calcined illitic clays (brick clays) and low-grade kaolinitic clays as supplementary cementitious materials

Nsesheye S. Msinjili et al.

MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Prediction of Compressive Strength of Concrete: Critical Comparison of Performance of a Hybrid Machine Learning Model with Standalone Models

Rachel Cook et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Impacting factors and properties of limestone calcined clay cements (LC3)

Karen Scrivener et al.

GREEN MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Mechanical properties and durability performance of concretes with Limestone Calcined Clay Cement (LC3)

Yuvaraj Dhandapani et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

Hydration kinetics and mechanisms of carbonates from stone wastes in ternary blends with calcined clay

Sreejith Krishnan et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Calcined clay limestone cements (LC3)

Karen Scrivener et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Materials Science, Ceramics

Topological controls on the dissolution kinetics of glassy aluminosilicates

Tandre Oey et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Add to Collection

Article Construction & Building Technology

Assessment of pore structure evolution in the limestone calcined clay cementitious system and its implications for performance

Yuvaraj Dhandapani et al.

CEMENT & CONCRETE COMPOSITES (2017)

Add to Collection

Article Construction & Building Technology

Portland metakaolin cement containing dolomite or limestone Similarities and differences in phase assemblage and compressive strength

Alisa Machner et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Environmental Sciences

Readily implementable techniques can cut annual CO2 emissions from the production of concrete by over 20%

Sabbie A. Miller et al.

ENVIRONMENTAL RESEARCH LETTERS (2016)

Add to Collection

Article Chemistry, Physical

Pozzolanic reactivity of low grade kaolinitic clays: Influence of calcination temperature and impact of calcination products on OPC hydration

Adrian Alujas et al.

APPLIED CLAY SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Long-term behavior of lime-metakaolin pastes at ambient temperature and humid curing condition

A. Santos Silva et al.

APPLIED CLAY SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Nanoscale Structure of Cement: Viewpoint of Rigidity Theory

Mathieu Bauchy et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2014)

Add to Collection

Article Construction & Building Technology

Assessment of pozzolanic activity of different calcined clays

Alejandra Tironi et al.

CEMENT & CONCRETE COMPOSITES (2013)

Add to Collection

Article Construction & Building Technology

Activation of clay in cement mortar applying mechanical, chemical and thermal techniques

Noor-ul-Amin et al.

ADVANCES IN CEMENT RESEARCH (2012)

Add to Collection

Article Construction & Building Technology

Cement substitution by a combination of metakaolin and limestone

M. Antoni et al.

CEMENT AND CONCRETE RESEARCH (2012)

Add to Collection

Article Construction & Building Technology

Analytical model for compressive strength, elastic modulus and peak strain of structural lightweight aggregate concrete

H. Z. Cui et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Review Biotechnology & Applied Microbiology

Random forests for genomic data analysis

Xi Chen et al.

GENOMICS (2012)

Add to Collection

Editorial Material Medicine, General & Internal

Pearson's correlation coefficient

Philip Sedgwick

BRITISH MEDICAL JOURNAL (2012)

Add to Collection

Article Construction & Building Technology

Influence of limestone content, gypsum content and fineness on early age properties of Portland limestone cement produced by inter-grinding

E. F. Irassar et al.

CEMENT & CONCRETE COMPOSITES (2011)

Add to Collection

Article Construction & Building Technology

The origin of the pozzolanic activity of calcined clay minerals: A comparison between kaolinite, illite and montmorillonite

Rodrigo Fernandez et al.

CEMENT AND CONCRETE RESEARCH (2011)

Add to Collection

Article Materials Science, Ceramics

Atomic scale foundation of temperature-dependent bonding constraints in network glasses and liquids

M. Bauchy et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2011)

Add to Collection

Article Computer Science, Artificial Intelligence

Variable selection using random forests

Robin Genuer et al.

PATTERN RECOGNITION LETTERS (2010)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Empirical characterization of random forest variable importance measures

Kelfie J. Archer et al.

COMPUTATIONAL STATISTICS & DATA ANALYSIS (2008)

Add to Collection

Article Biochemical Research Methods

Bias in random forest variable importance measures: Illustrations, sources and a solution

Carolin Strobl et al.

BMC BIOINFORMATICS (2007)

Add to Collection

Article Biochemical Research Methods

Gene selection and classification of microarray data using random forest -: art. no. 3

R Díaz-Uriarte et al.

BMC BIOINFORMATICS (2006)

Add to Collection

Article Computer Science, Artificial Intelligence

Random forests

L Breiman

MACHINE LEARNING (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.