☆ 4.5 Article

Meta-Dynamic Recrystallization in the Ni-Based Superalloy Haynes 282

METALS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Supersolvus Recrystallization and Grain Growth Kinetics for the Fine Tuning of Grain Size in VDM Alloy 780 Forgings

M. Hafez Haghighat et al.

Summary: VDM Alloy 780 is a new polycrystalline nickel-based superalloy developed for aeronautical applications. This paper provides detailed information about the recrystallization and grain growth kinetics of VDM Alloy 780, and reveals its relatively slow grain growth rate, which allows for precise control of grain size through subsequent heat treatments.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Dynamic recrystallization during hot compression of Ni-based superalloy Haynes 282

Emil Eriksson et al.

Summary: Understanding the microstructural behaviour of materials during thermomechanical processing is crucial for achieving optimal mechanical properties. We investigated the dynamic recrystallization (DRX) behaviour of Ni-base superalloy Haynes 282 during hot compression and observed the formation of small DRX grains before the peak strain. The DRX process accelerated significantly above a certain strain, and the material was fully recrystallized at a higher strain. Contrary to common assumptions, many DRX grains contained dislocation substructures, even at small strains.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

The Effect of Grain Boundary Carbides on Dynamic Recrystallization During Hot Compression of Ni-Based Superalloy Haynes 282™

Emil Eriksson et al.

Summary: This study examines the effect of grain boundary carbides on dynamic recrystallization during hot compression of Ni-base superalloy Haynes 282, and indicates that carbides do not significantly influence the process. The carbide solvus temperature is not a critical limit during thermomechanical processes as well.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Post-dynamic recrystallization behavior of a powder metallurgy Ni-Co-Cr based superalloy under different deformation conditions

Shichang Qiao et al.

Summary: The post-dynamic recrystallization behavior of a powder metallurgy Ni-Co-Cr based super-alloy was investigated through thermal compression tests. The study found that the deformation conditions significantly impact the recrystallization kinetics, while the evolution of twin boundaries plays a key role in promoting the release of deformation stored energy.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic and Post-Dynamic Recrystallization of Haynes 282 below the Secondary Carbide Solvus

Emil Eriksson et al.

Summary: The study focused on the effect of process parameters on dynamic and post-dynamic recrystallization during hot compression of Ni-base superalloy Haynes 282, with strain rate identified as the governing factor. During a 90-second post-deformation hold, significant changes in microstructure were observed, including grain growth and an increasing fraction of twin boundaries.

METALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Study of meta-dynamic recrystallization behavior of GH5188 superalloy

Dahai Liu et al.

Summary: Cobalt-based superalloys exhibit good performance in environments where nickel-based superalloys are not suitable. Research focused on the metadynamic recrystallization (MDRX) behavior of GH5188 superalloy using two-stage hot compression tests, establishing kinetic and grain size models to describe the process. Factors affecting MDRX microstructure evolution such as holding time, temperature, strain rate, and intervals time were analyzed, showing an increase in MDRX fraction and grain size with increasing parameters.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Precipitation of γ' during cooling of nickel-base superalloy Haynes 282

Ceena Joseph et al.

Summary: Research has shown that in Ni-base superalloys, air cooling after solution treatment and carbide stabilization can lead to precipitation of nm-sized gamma' particles, whereas precipitation is suppressed during water quenching. The solution treatment and carbide stabilization have significant effects on the subsequent gamma' precipitation during air cooling.

PHILOSOPHICAL MAGAZINE LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Investigation on the meta-dynamic recrystallization behavior of Inconel 718 superalloy in the presence of δ phase through a modified cellular automaton model

Fuxiang Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of strain rate on subsolvus dynamic and post-dynamic recrystallization kinetics of Inconel 718

A. Nicolay et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Chemistry, Physical

Kinetics equations and microstructural evolution during metadynamic recrystallization in a nickel-based superalloy with δ phase

Dao-Guang He et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

In Situ Characterization of Inconel 718 Post-Dynamic Recrystallization within a Scanning Electron Microscope

Meriem Zouari et al.

METALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

A new method to predict the metadynamic recrystallization behavior in a typical nickel-based superalloy

Y. C. Lin et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

The Kinetics of Metadynamic Recrystallization in a Ni-Cr-Mo-Based Superalloy Hastelloy C-276

Chi Zhang et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)

Add to Collection

Article Engineering, Industrial

Metadynamic recrystallization behavior and workability characteristics of HR3C austenitic heat-resistant stainless steel with processing map

Yang Cheng et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Behavior and modeling of microstructure evolution during metadynamic recrystallization of a Ni-based superalloy

Xuefeng Tang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of Inconel 718 in the absence of δ phase particles

Meriem Zouari et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Review Materials Science, Multidisciplinary

A review of dynamic recrystallization phenomena in metallic materials

K. Huang et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Chemistry, Physical

EBSD study of a hot deformed nickel-based superalloy

Y. C. Lin et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Characteristics of metadynamic recrystallization of Nimonic 80A superalloy

Sendong Gu et al.

JOURNAL OF MATERIALS RESEARCH (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

Taku Sakai et al.

PROGRESS IN MATERIALS SCIENCE (2014)

Add to Collection

Article Nanoscience & Nanotechnology

The metadynamic recrystallization in the two-stage isothermal compression of 300M steel

J. Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part III: Metadynamic recrystallization

Fei Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation

A. Dehghan-Manshadi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

Article Engineering, Industrial

Simulation of microstructures for Alloy 718 blade forging using 3D FEM simulator

YS Na et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.