☆ 4.5 Article

Implementation of ABAQUS User Subroutines for Viscoplasticity of 316 Stainless Steel and Zircaloy-4

METALS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

A computationally fast and accurate procedure for the identification of the Chaboche isotropic-kinematic hardening model parameters based on strain-controlled cycles and asymptotic ratcheting rate

C. Santus et al.

Summary: The study proposes an optimization method based on fitting the global properties of the cyclic curves to experimental data to determine the stress-strain behavior of materials under multiaxial cyclic loadings. The method provides an accurate description of the material behavior at a low computational cost. Experimental tests on various materials demonstrate the effectiveness of the proposed method.

INTERNATIONAL JOURNAL OF PLASTICITY (2023)

Add to Collection

Article Engineering, Mechanical

A revised Chaboche model from multiscale approach to predict the cyclic behavior of type 316 stainless steel at room temperature

Rou Du et al.

Summary: In this work, a revised Chaboche model is proposed based on a crystal plasticity multiscale approach. Experiments show that 316L steel exhibits two plasticity characteristics during cyclic loading at room temperature: variable plastic modulus in strain-controlled cycling and continuous growing ratcheting strain in stress-controlled cycling. These characteristics cannot be predicted by the classic Chaboche model. By considering the microstructure effect and the viscous effect, the revised model successfully predicts the strain- and stress-controlled cyclic behaviors observed in experiments. The potential application of the revised model in integrated structural analysis is also discussed.

INTERNATIONAL JOURNAL OF FATIGUE (2023)

Add to Collection

Review Materials Science, Multidisciplinary

Influencing factors and mechanism of iodine-induced stress corrosion cracking of zirconium alloy cladding: A review

Yusha Li et al.

Summary: This review summarizes the mechanisms and influencing factors of iodine-induced stress corrosion cracking (I-SCC) in zirconium alloys. The results show that the reaction between iodine and zirconium leads to the formation of micropits on the alloy surface, which eventually results in crack propagation and fracture. Additionally, factors such as iodine concentration, temperature, microstructure, and alloying elements play a role in the occurrence of stress corrosion cracking.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Creep life prediction for a nickel-based single crystal turbine blade

Zhen Li et al.

Summary: This study conducted creep tensile tests and established creep constitutive equations based on crystal plasticity theory. By combining FSI heat transfer analysis, it revealed the creep failure process of turbine blades, showing the deformation after failure and determining the creep life of the blades.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Oxidation behavior and Cr-Zr diffusion of Cr coatings prepared by atmospheric plasma spraying on zircaloy-4 cladding in steam at 1300?C

Qing Li et al.

Summary: Thick Cr coatings were successfully prepared on zircaloy-4 to improve its high-temperature steam oxidation resistance. The microstructure, oxidation behavior, and Cr-Zr diffusion were studied, and the results showed that the Cr coatings exhibited improved steam oxidation performance.

CORROSION SCIENCE (2022)

Add to Collection

Article Engineering, Mechanical

Deformation mechanism and cyclic stress response of Zircaloy-4 alloy cladding tube during low cycle fatigue at room temperature

Wenbin Guo et al.

Summary: This work systematically investigated the deformation mechanism and cyclic stress response behavior of Zircaloy-4 alloy cladding tube at room temperature. Low cyclic fatigue tests revealed that cyclic softening and hardening strongly depend on the applied strain amplitude, and prismatic < a > slip was the primary cyclic deformation mode when the value of plastic strain amplitude is less than that of elastic strain amplitude.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

Add to Collection

Article Mechanics

An improved unified viscoplastic model for modelling low cycle fatigue and creep fatigue interaction loadings of 9-12%Cr steel

Xiaowei Wang et al.

Summary: This study presents an improved unified viscoplastic model to simulate the various behavior of P92 steel under low cycle fatigue (LCF) and creep fatigue interaction (CFI) loadings. By adjusting the parameters and rules in the model, good agreement is achieved with experimental results.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2021)

Add to Collection

Article Nuclear Science & Technology

Metallic fuel cladding degradation model development and evaluation for BISON

Yinbin Miao et al.

Summary: The report highlights the development and implementation of BISON's FCCI/CCCI correlations and cladding degradation models, demonstrating their improved predictive capabilities and identifying limitations that will be addressed through BISON-FIPD integration efforts.

NUCLEAR ENGINEERING AND DESIGN (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Texture development and mechanical behavior of Zircaloy-4 alloy plates fabricated by cold rolling and annealing

Wenbin Guo et al.

Summary: The study systematically investigated the effect of cold rolling and annealing on the texture development and mechanical behavior of Zircaloy-4 alloy plates. It was found that thickness reduction during cold rolling led to changes in texture orientation, affecting the yield strength of the alloy plates.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Nuclear Science & Technology

BISON: A Flexible Code for Advanced Simulation of the Performance of Multiple Nuclear Fuel Forms

Richard L. Williamson et al.

Summary: BISON is a nuclear fuel performance application that offers flexibility in analyzing different types of fuel, modeling approaches, and model dimensions. It is used for research in nuclear fuel performance modeling and analysis of fuel designs. BISON includes integrated documentation, software quality assurance procedures, and verification and validation tests.

NUCLEAR TECHNOLOGY (2021)

Add to Collection

Article Nuclear Science & Technology

Fuel rod nonlinear vibrations to detect and characterize Pellet-Cladding Interaction

V. D'Ambrosi et al.

Summary: This study investigates the simulation of Pellet-Cladding Interaction (PCI) in a Light Water Reactor, aiming to understand the effect of PCI on nuclear fuel rod vibrations. The research focuses on the development of modeling capability and experimental data to explore the technological feasibility of measuring PCI impacts. The experimental results demonstrate the significance of PCI under controlled laboratory conditions and emphasize the importance of further research in this area.

NUCLEAR ENGINEERING AND DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Stress corrosion crack initiation of Zircaloy-4 cladding tubes in an iodine vapor environment during creep, relaxation, and constant strain rate tests

T. Jezequel et al.

JOURNAL OF NUCLEAR MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Finite Element Implementation of a Temperature-Dependent Cyclic Plastic Model for SA508-3 Steel

Jun Tian et al.

METALS (2018)

Add to Collection

Article Nuclear Science & Technology

Thermal isocreep curves obtained during multi-axial creep tests on recrystallized Zircaloy-4 and M5™ alloy

M. Rautenberg et al.

NUCLEAR ENGINEERING AND DESIGN (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Multidimensional multiphysics simulation of nuclear fuel behavior

R. L. Williamson et al.

JOURNAL OF NUCLEAR MATERIALS (2012)

Add to Collection

Article Nuclear Science & Technology

Cladding for high performance fuel

Lars Hallstadius et al.

PROGRESS IN NUCLEAR ENERGY (2012)

Add to Collection

Article Engineering, Multidisciplinary

Coupled viscoelastic-viscoplastic modeling of homogeneous and isotropic polymers: Numerical algorithm and analytical solutions

B. Miled et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2011)

Add to Collection

Review Engineering, Mechanical

Selection of fuel cladding material for nuclear fission reactors

C. R. F. Azevedo

ENGINEERING FAILURE ANALYSIS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancing the ABAQUS thermomechanics code to simulate multipellet steady and transient LWR fuel rod behavior

R. L. Williamson

JOURNAL OF NUCLEAR MATERIALS (2011)

Add to Collection

Article Engineering, Multidisciplinary

Cyclic thermo-mechanical material modelling and testing of 316 stainless steel

C. J. Hyde et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Three dimensional coupled simulation of thermomechanics, heat, and oxygen diffusion in UO2 nuclear fuel rods

Chris Newman et al.

JOURNAL OF NUCLEAR MATERIALS (2009)

Add to Collection

Article Nanoscience & Nanotechnology

Experimental creep behaviour determination of cladding tube materials under multi-axial loadings

Catherine Grosjean et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Add to Collection

Review Engineering, Mechanical

A review of some plasticity and viscoplasticity constitutive theories

J. L. Chaboche

INTERNATIONAL JOURNAL OF PLASTICITY (2008)

Add to Collection

Review Nuclear Science & Technology

Texture development and anisotropic deformation of zircaloys

KL Murty et al.

PROGRESS IN NUCLEAR ENERGY (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.