☆ 4.5 Article

Atomistic Simulations of Dislocation-Void Interactions in Concentrated Solid Solution Alloys

METALS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Recent Progress in Our Understanding of Phase Stability, Atomic Structures and Mechanical and Functional Properties of High-Entropy Alloys

Haruyuki Inui et al.

Summary: This paper reviews the current trend and recent progress in research on phase stability, atomic structures, mechanical and functional properties of high-entropy alloys. Since 2004, research on high-entropy alloys has spread worldwide and significant progress has been made.

MATERIALS TRANSACTIONS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced passivity of Cr-Fe-Co-Ni-Mo multi-component single-phase face-centred cubic alloys: design, production and corrosion behaviour

Xueying Wang et al.

Summary: Extensive thermodynamic calculations were carried out to explore the vast composition space of the Cr-Fe-Co-Ni-Mo system, aiming to design and characterize multi-component single-phase fcc alloys with optimized Cr and Mo content and enhanced passivity.

CORROSION SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Microstructure and texture of severely warm-rolled and annealed coarse-grained CoCrNi medium entropy alloy (MEA): A perspective on the initial grain size effect

J. Saha et al.

Summary: This study investigated the microstructure and texture formations in a coarse-grained starting material and a fine-grained starting material of equiatomic CoCrNi MEA after severe warm-rolling and annealing. The results showed that both materials developed an ultrafine microstructure with limited effect of starting grain size on microstructure and texture formation. The annealed specimens exhibited a remarkable strength-ductility balance due to the ultrafine microstructure and solid solution strengthening.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of elasticity and dislocation core structure on the interaction of dislocations with embedded CNTs in aluminium: An atomistic simulation study

Samaneh Nasiri et al.

Summary: This study investigates the interaction between edge dislocations and carbon nanotubes embedded into an Al matrix. It is found that the embedded carbon nanotubes contribute to a stress similar to that of non-shearable inclusions bypassed through the Orowan mechanism. However, the strain hardening mechanism associated with multiple dislocation passes shows strong effects of the atomistic core structure on the CNT-metal interface, dislocation lock formation and annihilation, jog formation, and shedding of prismatic dislocation loops.

MATERIALIA (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Pinning of extended dislocations in atomically disordered crystals

Aviral Vaid et al.

Summary: There is renewed interest in studying the behavior of dislocations in crystals with strong atomic scale disorder, particularly in compositionally complex alloys. This article discusses modifications to the existing framework of elastic manifold pinning to accommodate extended dislocations that split into widely separated partials. The study also investigates the effect of stacking faults on the behavior of dislocations and explores how geometrical constraints can enhance pinning stress.

ACTA MATERIALIA (2022)

Add to Collection

Review Physics, Multidisciplinary

Theoretical models of void nucleation and growth for ductile metals under dynamic loading: A review

Haonan Sui et al.

Summary: Understanding the mechanisms of void nucleation and growth under dynamic loading is crucial for damage analysis and design of damage-resistant materials. The development of experimental and simulation methods in the past few decades has provided abundant information for theoretical research in this field.

MATTER AND RADIATION AT EXTREMES (2022)

Add to Collection

Article Chemistry, Physical

Interaction mechanism of an edge dislocation with a void in Fe-Ni-Cr concentrated solid-solution alloy

Yan-Kun Dou et al.

Summary: The interactions between a 1/2 <110> {111} edge dislocation and a void in Fe10Ni20Cr and Fe33Ni33Cr concentrated solid-solution alloys were studied using molecular dynamics simulation. It was found that the dislocation motion becomes more difficult in Fe33Ni33Cr alloy due to larger fluctuations in stacking fault energy compared to Fe10Ni20Cr alloy. However, Fe33Ni33Cr alloy exhibits better irradiation hardening resistance than Fe10Ni20Cr alloy, especially at high temperatures.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Diffusion-mediated chemical concentration variation and void evolution in ion-irradiated NiCoFeCr high-entropy alloy

Zhe Fan et al.

Summary: It was found in the study of high-entropy alloys under ion irradiation that the matrix chemical concentration changes significantly at different depths, possibly due to the preferential diffusion of vacancies and the impact of structural damage.

JOURNAL OF MATERIALS RESEARCH (2021)

Add to Collection

Review Materials Science, Multidisciplinary

High entropy alloys: A focused review of mechanical properties and deformation mechanisms

E. P. George et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Unusual dislocation behavior in high-entropy alloys

Evan Ma

SCRIPTA MATERIALIA (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Molecular dynamics-based analysis of the effect of voids and HCP-Phase inclusion on deformation of single-crystal CoCrFeMnNi high-entropy alloy

Yuming Qi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Atomistic simulations of dynamics of an edge dislocation and its interaction with a void in copper: a comparative study

Wu-Rong Jian et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrogen induced vacancy clustering and void formation mechanisms at grain boundaries in palladium

Jonathan M. Polfus et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Strengthening mechanisms in high entropy alloys: Fundamental issues

Indranil Basu et al.

SCRIPTA MATERIALIA (2020)

Add to Collection

Review Nanoscience & Nanotechnology

High-entropy alloys

Easo P. George et al.

NATURE REVIEWS MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Two modes of screw dislocation glide in fcc single-phase concentrated alloys

Yuri N. Osetsky et al.

ACTA MATERIALIA (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Nanomechanical studies of high-entropy alloys

Yu Zou

JOURNAL OF MATERIALS RESEARCH (2018)

Add to Collection

Review Materials Science, Multidisciplinary

High-Entropy Alloys: A Current Evaluation of Founding Ideas and Core Effects and Exploring Nonlinear Alloys

Daniel B. Miracle

JOM (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Theory of strengthening in fcc high entropy alloys

Celine Varvenne et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Chemistry, Physical

Tensile properties of high- and medium-entropy alloys

A. Gali et al.

INTERMETALLICS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Interatomic potential to study plasticity in stainless steels: the FeNiCr model alloy

G. Bonny et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Atomistic simulation of dislocation-void interactions under cyclic loading

Y. Cheng et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Dislocation-void interaction in Fe: A comparison between molecular dynamics and dislocation dynamics

S. M. Hafez Haghighat et al.

JOURNAL OF NUCLEAR MATERIALS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Void-induced cross slip of screw dislocations in fcc copper

Takahiro Hatano et al.

PHYSICAL REVIEW B (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical and energetical analysis of molecular dynamics simulations of dislocation-defect interactions

Ghiath Monnet

ACTA MATERIALIA (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Dynamic aspects of dislocation motion: atomistic simulations

E Bitzek et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Molecular dynamics simulation of screw dislocations interacting with interstitial frank loops in a model FCC crystal

D Rodney

ACTA MATERIALIA (2004)

Add to Collection

Article Nanoscience & Nanotechnology

Depinning of a dislocation: the influence of long-range interactions

S Zapperi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.