4.5 Article

Porous polyhedral carbon matrix for high-performance Li/Na/K-ion battery anodes

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Dual-template synthesis of interconnected 3D hollow N-doped carbon network for electrochemical application

Liang Chen et al.

Summary: In this study, a novel dual-template strategy was proposed to fabricate interconnected 3D hollow N-doped carbon network (HNCN). Compared to other materials, HNCN exhibited unique 3D interconnected architecture, larger specific surface area, hierarchical meso/macropore structure, higher N doping amount, and more optimized N configurations. These advantageous features endowed HNCN with remarkably improved electrochemical performance, broadening its application in energy storage and conversion.

CARBON LETTERS (2023)

Article Chemistry, Multidisciplinary

Gamma-ray irradiated graphene nanosheets/polydopamine hybrids as a superior anode material for lithium-ion batteries

Kyoung-Il Jo et al.

Summary: In this study, high-performance graphene oxide (GO) anodes were fabricated by using gamma (γ)-ray irradiation to enhance the electrical conductivity of GO. The results showed that the covalent crosslinking of GO-PDA-PEI hybrid sheets improved the conductivity and stability, resulting in an increase in charge/discharge capacity.

CARBON LETTERS (2022)

Article Chemistry, Multidisciplinary

Study of the preparation and electrochemical performance of porous carbon derived from hypercrosslinked polymers

Lili Wu et al.

Summary: In this study, a solvothermal method was used to prepare a hypercrosslinked polymer, which was then used as a precursor to prepare porous carbon materials. The fabricated porous carbon exhibited high specific surface area, large pore size, and excellent electrochemical performance, cycle stability, and energy storage performance in acidic electrolyte.

CARBON LETTERS (2022)

Article Chemistry, Multidisciplinary

Oriented wrinkle textures of free-standing graphene nanosheets: application as a high-performance lithium-ion battery anode

Hee-Sung Jeong et al.

Summary: In this study, wrinkle textures were fabricated on large area free-standing graphene nanosheets using Langmuir-Schaefer technique, which can improve the specific surface area between graphene nanosheets and facilitate Li-ion diffusion. The wrinkled GNS multilayer exhibits high specific capacity and great power capability in Li-ion batteries, with excellent cycle performance achieved over 200 cycles at 300 mA g(-1) and high Coulombic efficiency around 96%.

CARBON LETTERS (2021)

Article Chemistry, Multidisciplinary

Facile preparation of ZnO quantum dots@porous carbon composites through direct carbonization of metal-organic complex for high-performance lithium ion batteries

Yun Ji Oh et al.

Summary: A composite material of ZnO quantum dots (ZnO QDs) and porous carbon was prepared using a one-step carbonization process, resulting in a homogeneous distribution of ZnO QDs within the mesostructured porous carbon. The composite showed high specific capacity and reversibility, making it a promising anode material for lithium ion batteries. Structural and morphological properties were thoroughly investigated using X-ray diffraction, scanning electron microscopy, and transmission electron microscopy.

CARBON LETTERS (2021)

Review Chemistry, Physical

Hard Carbon Anodes: Fundamental Understanding and Commercial Perspectives for Na-Ion Batteries beyond Li-Ion and K-Ion Counterparts

Ling-Fei Zhao et al.

Summary: Hard carbon is recognized as a promising anode material for alkali metal-ion batteries, particularly showing outstanding performance in sodium-ion batteries, with in-depth research and commercial prototype demonstration. Challenges and research perspectives for future development and early commercialization of HC-based sodium-ion batteries are also discussed comprehensively.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

A criterion combined of bulk and surface lithium storage to predict the capacity of porous carbon lithium-ion battery anodes: lithium-ion battery anode capacity prediction

Majid Shaker et al.

Summary: A novel model is proposed in this study to estimate the lithium storage capacity of porous carbon LIB anodes based on porosity, introducing a new factor called normalized surface area to improve prediction accuracy. The predicted capacities show remarkable consistency with experimental works, confirming the validity and reliability of the approach for further predictions.

CARBON LETTERS (2021)

Article Engineering, Environmental

Superior carbon black: High-performance anode and conducting additive for rechargeable Li- and Na-ion batteries

Ki-Hun Nam et al.

Summary: By utilizing a two-step strategy of amorphization and pre-lithiation/sodiation, superior carbon black has been successfully designed as a high-performance conducting additive for Li-ion batteries and Na-ion batteries, showing high reversible capacities and stable cycling behavior.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Three-dimensional porous ultrathin carbon networks reinforced PBAs-derived electrocatalysts for efficient oxygen evolution

Mengjie Hou et al.

Summary: The controllable thermal decomposition of PBAs precursor results in small-sized nanoparticles, while the use of 3DNC as supporting matrix and thermal conductive agent enhances electrical conductivity and specific surface area, leading to a hybrid material with remarkable electrocatalytic activity and stability for the oxygen evolution reaction.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Effect of crystallinity and particle size on coke-based anode for lithium ion batteries

Seung Eun Lee et al.

Summary: This study found that the crystalline properties significantly affect the performance of graphite anode materials, with higher crystallinity resulting in higher initial efficiency and the presence of cavities between crystals impacting lithium ion capacity. Rate performance is more influenced by particle size, with 10-15 microns being the optimal range for performance.

CARBON LETTERS (2021)

Article Chemistry, Physical

Robust Polyhedral CoTe2-C Nanocomposites as High-Performance Li- and Na-Ion Battery Anodes

Vinoth Ganesan et al.

ACS APPLIED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

Bi-Sb Nanocrystals Embedded in Phosphorus as High-Performance Potassium Ion Battery Electrodes

Kuan-Ting Chen et al.

ACS NANO (2020)

Article Chemistry, Multidisciplinary

Extremely stable antimony-carbon composite anodes for potassium-ion batteries

Jing Zheng et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Review Chemistry, Multidisciplinary

Intercalation chemistry of graphite: alkali metal ions and beyond

Yuqi Li et al.

CHEMICAL SOCIETY REVIEWS (2019)

Article Chemistry, Multidisciplinary

Towards K-Ion and Na-Ion Batteries as Beyond Li-Ion

Kei Kubota et al.

CHEMICAL RECORD (2018)

Review Chemistry, Physical

Metal-Organic Framework-Derived Carbons for Battery Applications

Xiaxia Li et al.

ADVANCED ENERGY MATERIALS (2018)

Article Multidisciplinary Sciences

N-doped catalytic graphitized hard carbon for high-performance lithium/sodium-ion batteries

Ning Wang et al.

SCIENTIFIC REPORTS (2018)

Article Chemistry, Physical

Nitrogen-doped bamboo-like carbon nanotubes as anode material for high performance potassium ion batteries

Yanzhen Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Physical

High pyridine N-doped porous carbon derived from metal-organic frameworks for boosting potassium-ion storage

Youpeng Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Inorganic & Nuclear

From Metal-Organic Framework to Porous Carbon Polyhedron: Toward Highly Reversible Lithium Storage

Hai-Jun Peng et al.

INORGANIC CHEMISTRY (2017)

Article Chemistry, Physical

Porous Carbon Composites for Next Generation Rechargeable Lithium Batteries

Hao Liu et al.

ADVANCED ENERGY MATERIALS (2017)

Review Chemistry, Physical

Carbon nanofiber-based nanostructures for lithium-ion and sodium-ion batteries

Weihan Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Applied

Porous carbon: A versatile material for catalysis

Ines Matos et al.

CATALYSIS TODAY (2017)

Article Chemistry, Multidisciplinary

Tin-based composite anodes for potassium-ion batteries

Irin Sultana et al.

CHEMICAL COMMUNICATIONS (2016)

Article Electrochemistry

Cube-shaped Porous Carbon Derived from MOF-5 as Advanced Material for Sodium-Ion Batteries

Guoqiang Zou et al.

ELECTROCHIMICA ACTA (2016)

Article Chemistry, Multidisciplinary

Carbon Electrodes for K-Ion Batteries

Zelang Jian et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Chemistry, Physical

Reduction of graphene oxide in Li-ion batteries

Chunsong Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Review Chemistry, Multidisciplinary

Alloy Negative Electrodes for Li-Ion Batteries

M. N. Obrovac et al.

CHEMICAL REVIEWS (2014)

Article Multidisciplinary Sciences

Expanded graphite as superior anode for sodium-ion batteries

Yang Wen et al.

NATURE COMMUNICATIONS (2014)

Article Chemistry, Physical

Electrospun carbon nanofibers as anode materials for sodium ion batteries with excellent cycle performance

Taiqiang Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Chemistry, Multidisciplinary

Sodium-Ion Batteries

Michael D. Slater et al.

ADVANCED FUNCTIONAL MATERIALS (2013)

Article Chemistry, Multidisciplinary

Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications

Yuliang Cao et al.

NANO LETTERS (2012)

Article Electrochemistry

Challenges for Na-ion Negative Electrodes

V. L. Chevrier et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Review Multidisciplinary Sciences

Electrical Energy Storage for the Grid: A Battery of Choices

Bruce Dunn et al.

SCIENCE (2011)

Review Chemistry, Multidisciplinary

Li-alloy based anode materials for Li secondary batteries

Cheol-Min Park et al.

CHEMICAL SOCIETY REVIEWS (2010)

Article Nanoscience & Nanotechnology

High-power lithium batteries from functionalized carbon-nanotube electrodes

Seung Woo Lee et al.

NATURE NANOTECHNOLOGY (2010)

Article Electrochemistry

Hierarchical porous carbon derived from rice straw for lithium ion batteries with high-rate performance

Feng Zhang et al.

ELECTROCHEMISTRY COMMUNICATIONS (2009)

Article Chemistry, Multidisciplinary

Metal-organic framework as a template for porous carbon synthesis

Bo Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)

Article Multidisciplinary Sciences

Building better batteries

M. Armand et al.

NATURE (2008)

Article Electrochemistry

The mechanisms of lithium and sodium insertion in carbon materials

DA Stevens et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)