Related references
Note: Only part of the references are listed.A review on applications of functional superhydrophobic surfaces prepared by laser biomimetic manufacturing
Yang Liu et al.
JOURNAL OF MATERIALS SCIENCE (2023)
Determination of Sessile Drop Wetting Angle Based on μCT without the Direct Angle Measurement
Rail Kadyrov et al.
LANGMUIR (2023)
Corrosion Inhibition of Aluminum in Acidic Solution by Ilex paraguariensis (Yerba Mate) Extract as a Green Inhibitor
Claudia M. Mendez et al.
COATINGS (2023)
Online process monitoring of direct laser interference patterning using an infrared camera system
Lukas Olawsky et al.
MATERIALS LETTERS (2023)
Evaluation of three methods of static contact angle measurements for TiO2 nanofluid droplets during evaporation
Sylwia Wcislik et al.
PHYSICS OF FLUIDS (2022)
Enhancement of the corrosion resistance of mild steel with femtosecond laser- nanostructuring and CrCoNi medium entropy alloy coating
Shahbaz Ahmad et al.
APPLIED SURFACE SCIENCE ADVANCES (2022)
Anti-corrosion superhydrophobic surfaces of Al alloy based on micro-protrusion array structure fabricated by laser direct writing
Guoqiang Xin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Femtosecond and picosecond laser fabrication for long-term superhydrophilic metal surfaces
Rahul A. Rajan et al.
OPTICS AND LASER TECHNOLOGY (2021)
Tailored wetting of copper using precise nanosecond direct laser interference patterning
Robert Baumann et al.
OPTICS AND LASERS IN ENGINEERING (2021)
Fast and environmentally friendly fabrication of superhydrophilic-superhydrophobic patterned aluminum surfaces
C. N. Niu et al.
SURFACES AND INTERFACES (2021)
Simultaneous Micro-Structuring and Surface Smoothing of Additive Manufactured Parts Using DLIP Technique and Its Influence on the Wetting Behaviour
Florian Kuisat et al.
MATERIALS (2021)
Contact angle measurements: From existing methods to an open-source tool
Raziyeh Akbari et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2021)
Review on Corrosion Inhibitors for Oil and Gas Corrosion Issues
Kausalya Tamalmani et al.
APPLIED SCIENCES-BASEL (2020)
Roles of chemistry modification for laser textured metal alloys to achieve extreme surface wetting behaviors
Avik Samanta et al.
MATERIALS & DESIGN (2020)
Corrosion performance of plasma electrolytic oxidation grown oxide coating on pure aluminum: effect of borax concentration
Getinet Asrat Mengesha et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Characterization of self-cleaning properties on superhydrophobic aluminum surfaces fabricated by direct laser writing and direct laser interference patterning
Stephan Milles et al.
APPLIED SURFACE SCIENCE (2020)
Laser-chemical treated superhydrophobic surface as a barrier to marine atmospheric corrosion
Huixin Wang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
A generalized model of the equivalent circuits in the electrochemical impedance spectroscopy
Zoltan Lukacs et al.
ELECTROCHIMICA ACTA (2020)
Nanosecond laser fabrication of superhydrophobic surface on 316L stainless steel and corrosion protection application
Yao Lu et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)
Influence of roughness achieved by periodic structures on the wettability of aluminum using direct laser writing and direct laser interference patterning technology
S. Milles et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
A rapid one-step nanosecond laser process for fabrication of super-hydrophilic aluminum surface
Jingnan Zhao et al.
OPTICS AND LASER TECHNOLOGY (2019)
Hybrid Laser Ablation and Chemical Modification for Fast Fabrication of Bio-inspired Super-hydrophobic Surface with Excellent Self-cleaning, Stability and Corrosion Resistance
Zhen Yang et al.
JOURNAL OF BIONIC ENGINEERING (2019)
Fabrication of superhydrophobic surfaces for corrosion protection: a review
Minrui Ran et al.
MATERIALS SCIENCE AND TECHNOLOGY (2019)
Control of laser-ablated aluminum surface wettability to superhydrophobic or superhydrophilic through simple heat treatment or water boiling post-processing
Chi-Vinh Ngo et al.
APPLIED SURFACE SCIENCE (2018)
Influence of laser parameters in surface texturing of Ti6A14V and AA2024-T3 alloys
J. I. Ahuir-Torres et al.
OPTICS AND LASERS IN ENGINEERING (2018)
Application of superhydrophobic coatings as a corrosion barrier: A review
E. Vazirinasab et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Improvement of corrosion resistance of AA2024-T3 using femtosecond laser peening without protective and confining medium
Uros Trdan et al.
CORROSION SCIENCE (2018)
Nanosecond Laser Fabrication of Hydrophobic Stainless Steel Surfaces: The Impact on Microstructure and Corrosion Resistance
Mehran Rafieazad et al.
MATERIALS (2018)
Superhydrophobic corrosion resistant coatings for copper via IR nanosecond laser processing
Kirill A. Emelyanenko et al.
MATERIALS RESEARCH EXPRESS (2018)
Localized corrosion in AA2024-T351 aluminium alloy: Transition from intergranular corrosion to crystallographic pitting
Xinxin Zhang et al.
MATERIALS CHARACTERIZATION (2017)
Surface texturing of aluminium alloy AA2024-T3 by picosecond laser: Effect on wettability and corrosion properties
J. I. Ahuir-Torres et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Influence of ambient conditions on the evolution of wettability properties of an IR-, ns-laser textured aluminium alloy
J. T. Cardoso et al.
RSC ADVANCES (2017)
Laser interference patterning methods: Possibilities for high-throughput fabrication of periodic surface patterns
Andres Fabian Lasagni
ADVANCED OPTICAL TECHNOLOGIES (2017)
Transition from superhydrophilic to superhydrophobic state of laser textured stainless steel surface and its effect on corrosion resistance
Uros Trdan et al.
CORROSION SCIENCE (2017)
Superhydrophobic surfaces for corrosion protection: a review of recent progresses and future directions
Dawei Zhang et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2016)
One-step fabrication of near superhydrophobic aluminum surface by nanosecond laser ablation
R. Jagdheesh et al.
APPLIED SURFACE SCIENCE (2016)
Corrosion resistance of laser patterned ultrahydrophobic aluminium surface
L. Ruiz de lara et al.
MATERIALS LETTERS (2016)
Superhydrophobic Surfaces Fabricated by Femtosecond Laser with Tunable Water Adhesion: From Lotus Leaf to Rose Petal
Jiangyou Long et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Synergistic Effect of Superhydrophobicity and Oxidized Layers on Corrosion Resistance of Aluminum Alloy Surface Textured by Nanosecond Laser Treatment
Ludmila B. Boinovich et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Nanosecond laser textured superhydrophobic metallic surfaces and their chemical sensing applications
Duong V. Ta et al.
APPLIED SURFACE SCIENCE (2015)
Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties
Ying Huang et al.
APPLIED SURFACE SCIENCE (2015)
Fabrication of metallic surfaces with long-term superhydrophilic property using one-stop laser method
Y. C. Guan et al.
MATERIALS & DESIGN (2015)
Corrosion behavior of superhydrophobic surfaces: A review
Adel M. A. Mohamed et al.
ARABIAN JOURNAL OF CHEMISTRY (2015)
Superhydrophobic membranes on metal substrate and their corrosion protection in different corrosive media
Nan Wang et al.
APPLIED SURFACE SCIENCE (2014)
Alkyl carboxylates as efficient and green inhibitors of magnesium alloy ZE41 corrosion in aqueous salt solution
Nandini Dinodi et al.
CORROSION SCIENCE (2014)
Fabrication of a Superhydrophobic Al2O3 Surface Using Picosecond Laser Pulses
R. Jagdheesh
LANGMUIR (2014)
Influence of laser surface treated on the characterization and corrosion behavior of Al-Fe aerospace alloys
Moises Meza Pariona et al.
APPLIED SURFACE SCIENCE (2013)
Hydrophobicity of rare-earth oxide ceramics
Gisele Azimi et al.
NATURE MATERIALS (2013)
Effects of Pulse Duration on Laser Micro Polishing
Madhu Vadali et al.
JOURNAL OF MICRO AND NANO-MANUFACTURING (2013)
Nano structures via laser interference patterning for guided cell growth of neuronal cells
Elke A. Bremus-Koebberling et al.
JOURNAL OF LASER APPLICATIONS (2012)
Characterisation of oxide and hydroxide layers on technical aluminum materials using XPS
J. Zaehr et al.
VACUUM (2012)
Preparation of superhydrophobic films on titanium as effective corrosion barriers
Fen Zhang et al.
APPLIED SURFACE SCIENCE (2011)
Laser-Patterned Super-Hydrophobic Pure Metallic Substrates: Cassie to Wenzel Wetting Transitions
Anne-Marie Kietzig et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2011)
Fabrication of Hierarchically Micro- and Nano-structured Mold Surfaces Using Laser Ablation for Mass Production of Superhydrophobic Surfaces
Jiwhan Noh et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2010)
Large-area fabrication of superhydrophobic surfaces for practical applications: an overview
Chao-Hua Xue et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2010)
Fabrication of superhydrophobic surfaces by dislocation-selective chemical etching on aluminum, copper, and zinc substrates
BT Qian et al.
LANGMUIR (2005)
Study on a hydrophobic nano-TiO2 coating and its properties for corrosion protection of metals
GX Shen et al.
ELECTROCHIMICA ACTA (2005)
Laser interference metallurgy-periodic surface patterning and formation of intermetallics
F Mücklich et al.
INTERMETALLICS (2005)
A novel method for determination of diffusion coefficient of corrosive species in organic coatings by EIS
JM Hu et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Formation of crystallographic etch pits during AC etching of aluminum
JH Seo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Polarization resistance method for determination of instantaneous corrosion rates
JR Scully
CORROSION (2000)
Chemical analysis of products obtained by nanosecond laser ablation
MN Libenson et al.
TECHNICAL PHYSICS (2000)