☆ 4.6 Review

Smart Geosynthetics and Prospects for Civil Infrastructure Monitoring: A Comprehensive and Critical Review

SUSTAINABILITY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Adhesive, multifunctional, and wearable electronics based on MXene-coated textile for personal heating systems, electromagnetic interference shielding, and pressure sensing

Dijie Yao et al.

Summary: This study presents a skin-adhesive multifunctional textile-based device fabricated using a simple and scalable layer-by-layer dip-coating method. The device exhibits excellent electro-thermal and photo-thermal conversion performance, good cycling stability, and capabilities for electromagnetic interference shielding and human motion detection.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Engineering, Multidisciplinary

Artificial intelligence-based fiber optic sensing for soil moisture measurement with different cover conditions

Xi-Feng Liu et al.

Summary: Actively heated fiber Bragg grating (AH-FBG) can be used for quasi-distributed monitoring of soil water content, but the analysis method needs improvement to minimize measurement errors. In this study, an artificial intelligence method is proposed and tested using a model to explore the influence of different cover conditions. The highest accuracy in water content measurements based on maximum temperature increase is achieved with grass cover, followed by bare soil, and the worst accuracy is with biochar mixed soil. Fluctuation in heat power and longitudinal heat transfer are the main sources of measurement errors. Artificial neural network (ANN) models can effectively improve monitoring accuracy by considering cover conditions that influence initial ground temperatures and water content gradients.

MEASUREMENT (2023)

Add to Collection

Article Chemistry, Applied

UV curable PUA ink with polymerizable surfactant-enhanced Ag@PPy for fabricating flexible and durable conductive coating on the surface of cotton fabric

Xiutian Guo et al.

Summary: In this study, a stable silver@polypyrrole composite was prepared with the help of sodium dodecyl sulfate (SDS) and polymerizable surfactant ammonium allyloxynonylphenol ethoxylate (DNS-86). The composite was then used to prepare a conductive ink and applied on the surface of cotton fabric using an energy-saving and sustainable UV curing method. The effects of DNS-86 on the properties of the composite and the performance of the conductive coating were investigated, revealing that DNS-86 could improve the stability, uniformity, conductivity, flexibility, and durability of the coating.

PROGRESS IN ORGANIC COATINGS (2023)

Add to Collection

Article Chemistry, Analytical

Screen-printed graphene-carbon ink based disposable humidity sensor with wireless communication

Ajay Beniwal et al.

Summary: This article presents a flexible, cost-effective, and disposable humidity sensor developed on a paper substrate. The sensor demonstrates good sensing performance, high flexibility, stability, repeatability, short response/recovery time, and good reproducibility. The sensor's efficacy is evaluated for spatial humidity monitoring, respiration rate monitoring, and soil moisture monitoring, showing its potential applications in environmental, agricultural, and healthcare fields.

SENSORS AND ACTUATORS B-CHEMICAL (2023)

Add to Collection

Review Environmental Sciences

Process Water Management and Seepage Control in Tailings Storage Facilities: Engineered Environmental Solutions Applied in Chile and Peru

Carlos Cacciuttolo et al.

Summary: In the past thirty years, many mining projects in Chile and Peru have utilized polymeric geomembranes and design-and-build cutoff trenches, plastic concrete slurry walls, and grout curtain systems to control seepage at tailings storage facilities. The use of geosynthetics in TSF dams in Chile and Peru, which face challenging environmental and seismic conditions, has been effective in reducing leakage. This article discusses aspects of geosynthetic technology acceptance, lessons learned, and advancements in these countries.

WATER (2023)

Add to Collection

Article Geosciences, Multidisciplinary

Development and application of a borehole stress meter in rocks surrounding the roadway, based on optical-fiber sensing technology

Xiaoping Xie et al.

Summary: The stress in rock masses is an important parameter for underground engineering design and construction. However, the current monitoring technology for coal mine roadway surrounding rocks in China lacks intelligence and a systematic approach, as well as high-precision sensing instruments and multi-functional monitoring systems. In this study, a mechanical model of rocks surrounding a borehole was constructed, and the interaction between the rocks and the borehole stress meter was analyzed. Two types of borehole stress meters using fiber Bragg grating were designed and compared in laboratory tests. The field application of the cystic-structure fiber Bragg grating (CS-FBG) borehole stress meter in the testing of a coal mine roadway showed significant stress growth and stress peak zones, with four stages of stress change: rapid rise, uniform growth, rapid rise to the peak, and rapid decline. The CS-FBG borehole stress meter proved to be reasonable in design, and the field monitoring achieved the expected effect.

FRONTIERS IN EARTH SCIENCE (2023)

Add to Collection

Article Construction & Building Technology

A sustainable cementitious composite reinforced with natural fibers: An experimental and numerical study

Mohammadmahdi Abedi et al.

Summary: Eco-friendly nature, low cost, life-cycle superiority, and lightweight are the key drivers for using natural fibers in cementitious-based composites. This study focuses on developing a sustainable cementitious composite reinforced with chemically-treated kenaf and coconut fibers. Experimental and finite element analyses were conducted to investigate the mechanical, microstructural, and durability properties of the composite. The results showed that adding 1.5% wt of kenaf fiber significantly enhanced the mechanical behavior and durability performance of the composite through microstructural enhancement. This study highlights the immense potential of natural fibers in developing sustainable and affordable cementitious composites for various infrastructure applications.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Engineering, Geological

Characterization of sliding surface deformation and stability evaluation of landslides with fiber-optic strain sensing nerves

Hong -Hu Zhu et al.

Summary: Deformation monitoring using fiber-optic strain sensing cables is important for studying the evolution stages and triggering factors of landslides. However, the interaction between the cables and surrounding geomaterials during shearing is not well understood. This study presents an analytical methodology to interpret the cable-soil interaction and calculates the shear displacements of critical interfaces in landslides. The proposed method is validated through laboratory shear tests and applied to the Majiagou landslide in the Three Gorges Reservoir region, China. The study establishes empirical relationships between measured strains and factors of safety, showing that water level drawdown and rainfall accelerate shear deformation of the landslide.

ENGINEERING GEOLOGY (2023)

Add to Collection

Article Engineering, Geological

A preliminary study of the application of the strain-self-sensing smart geogrid rib in expansive soils

Gang Bi et al.

Summary: In this study, a strain-self-sensing smart geogrid rib was proposed to monitor the induced strain by wetting-drying cycles of expansive soil. A physical modeling test was conducted to evaluate its performance and the results showed that the smart geogrid rib was capable of accurately self-sensing strain and capturing crack propagation. Further research will focus on the mechanism of the geogrid and its application in real-time monitoring of geosynthetic expansive soil slopes.

GEOTEXTILES AND GEOMEMBRANES (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Multifunctional hydrophobic fabric-based strain sensor for human motion detection and personal thermal management

Tianxue Zhu et al.

Summary: This study successfully prepared a hydrophobic and conductive fabric-based strain sensor for smart fabric, which can be used as a strain sensor and wearable heater. The sensor exhibited a fast electrical response, excellent stability, and satisfactory electro-thermal and photo-thermal performances. It shows great potential for applications in medical monitoring and personal care.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Construction & Building Technology

Cross-sectional and confining system unification on peak compressive strength of FRP confined concrete

Javad Shayanfar et al.

Summary: A new model is developed and calibrated based on a large test database by proposing a cross-sectional and confining system unification approach. The developed model demonstrates a high reliability and suitable for design purposes by balancing the simplicity of the usage and accuracy.

STRUCTURAL CONCRETE (2023)

Add to Collection

Article Chemistry, Applied

Transparent, intrinsically stretchable cellulose nanofiber-mediated conductive hydrogel for strain and humidity sensing

Ziyu Bian et al.

Summary: Conductive hydrogels with high stretchability, good transparency, and multisensory function were prepared by incorporating carboxylic cellulose nanofibers (CCNF) and poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT: PSS) into a crosslinked polyacrylamide network. These hydrogels demonstrated excellent humidity response behavior, strain sensing behavior, as well as the ability to detect and discriminate complex human activities and physiological signals, making them suitable for the new generation of flexible wearable electronics.

CARBOHYDRATE POLYMERS (2023)

Add to Collection

Article Engineering, Environmental

A convenient, low-cost graphene UV-cured additive manufacturing electronic process to achieve flexible sensors

Shuyuan Zhang et al.

Summary: This study proposes a GUDE process based on photo-curing additive manufacturing technology for fabricating flexible electrode components. The GUDE process allows for direct printing of conductive structures without the need for complex equipment or preparation. Experimental results with a flexible humidity-sensing electronic device demonstrate the feasibility and potential applications of the GUDE technology.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Engineering, Civil

Analysis-oriented model for partially FRP-and-steel-confined circular RC columns under compression

Javad Shayanfar et al.

Summary: This paper develops a new analysis-oriented model for fully and partially confined RC columns under compression. The model takes into consideration the influence of concrete expansion distribution and combines FRP strips and steel transverse reinforcements for confinement. The model considers the influence of partially imposed confinement strategy on the axial and dilation behavior of RC columns and is validated through experimental simulations.

ENGINEERING STRUCTURES (2023)

Add to Collection

Article Construction & Building Technology

A self-sensing and self-heating planar braided composite for smart civil infrastructures reinforcement

Mohammadmahdi Abedi et al.

Summary: In this study, a multifunctional planar braided composite with capabilities of reinforcing, self-sensing, and self-heating was developed. Different commercial fabrics were chemically treated, coated with a carbon nanomaterial-based conductive paste, and sealed with a thermoplastic polyurethane-based polymer. Smart planar composites (SPC) were used as reinforcement for cementitious specimens. The SPCs showed proper heating capability, strain sensing potential, and improved mechanical properties of the cementitious composites.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Engineering, Civil

Analytical model to predict axial stress-strain behavior of heat-damaged unreinforced concrete columns wrapped by FRP jacket

Javad Shayanfar et al.

Summary: This study proposes a reliable design-oriented model to determine the axial fc-epsilon c of heat-damaged concrete columns post-confined with FRP. The model includes a set of strength and strain sub-models to calculate the stress/strain information at transition and ultimate points defining the stress-strain response. By analyzing a large test database of 1914 specimens and calibrating key components, the proposed model demonstrates the influence of pre-existing thermal damage on the axial fc-epsilon c relationship and its reliability is comprehensively validated through predicting data from experimental heat-damaged concrete specimens confined with FRP systems.

ENGINEERING STRUCTURES (2023)

Add to Collection

Article Chemistry, Analytical

Crack Shape Coefficient: Comparison between Different DFOS Tools Embedded for Crack Monitoring in Concrete

Tomasz Howiacki et al.

Summary: The article presents research on the performance of different distributed fibre optic sensing (DFOS) tools, specifically layered cables and monolithic composite sensors. The research focused on the need for DFOS techniques in measuring cracked concrete structures. The study found noticeable differences in the quality of results depending on the DFOS tool used, and provided practical guidelines for tool design and field proofs based on data from two concrete bridges in Germany.

SENSORS (2023)

Add to Collection

Article Construction & Building Technology

Intelligent Risk Prognosis and Control of Foundation Pit Excavation Based on Digital Twin

Zhe Sun et al.

Summary: This study aims to establish an intelligent risk prognosis and control framework based on digital twin (DT) for ensuring safe and effective foundation pit excavation (FPE) processes. The authors have established a DT model that consists of a physical space model and a high-fidelity physics-based model in virtual space, enabling the interaction and feedback mechanisms between the physical and virtual space. They have also proposed an integrated model and data-driven approach for examining safety risks during FPE.

BUILDINGS (2023)

Add to Collection

Article Construction & Building Technology

Cross-sectional and confining system unification on peak compressive strength of FRP confined concrete

Javad Shayanfar et al.

Summary: In this study, a new model for determining the peak compressive strength of FRP-confined concrete columns is developed by unifying the cross-sectional and confining system approach. The model is calibrated based on a large test database and demonstrates high reliability and suitability for design purposes.

STRUCTURAL CONCRETE (2023)

Add to Collection

Review Biochemistry & Molecular Biology

A comprehensive review on the recent advancements in natural rubber nanocomposites

A. S. Sethulekshmi et al.

Summary: The use of nanofillers in NR matrix can significantly improve the performance of rubber, with outstanding reinforcing effects. It not only improves mechanical properties, but also enhances electrical, thermal, and antimicrobial properties.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Review Polymer Science

Performance of various fillers in adhesives applications: a review

Malav R. Sanghvi et al.

Summary: Adhesives are substances used to join materials and are composed of polymers and additives, including fillers. The type and amount of filler added affect the properties of the adhesive. This paper reviews the effects of different fillers on adhesive properties.

POLYMER BULLETIN (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Coatings Functionalization via Laser versus Other Deposition Techniques for Medical Applications: A Comparative Review

Maria Badiceanu et al.

Summary: The development of new biological devices requires continuous efforts in improving the functionalization based on materials and fabrication techniques. Laser techniques provide effective deposition methods to enhance coating adherence and biological characteristics without compromising mechanical properties. This review discusses various laser techniques compared to other deposition methods.

COATINGS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Research Status of Graphene Polyurethane Composite Coating

Zhou Fang et al.

Summary: This paper investigates the preparation and properties of graphene polyurethane composite coatings, analyzes the mechanism of graphene in the new coatings, and expands the research and development of new anticorrotic coatings.

COATINGS (2022)

Add to Collection

Review Multidisciplinary Sciences

Applications of nanotechnology in smart textile industry: A critical review

Mudasir Akbar Shah et al.

Summary: Nanotechnology is playing an increasingly important role in designing smart fabrics, introducing properties like antimicrobial, UV resistance, conductivity, optics, waterproofing, and flame retardancy. Smart nanomaterial-based devices are now integrated with textiles for functions like energy harvesting, sensing, drug release, and optics. These advancements have wide applications in fashion, defense, healthcare, and on-body energy harnessing, with ongoing research into further developments.

JOURNAL OF ADVANCED RESEARCH (2022)

Add to Collection

Article Engineering, Multidisciplinary

Electroluminescent strain sensing on carbon fiber reinforced polymer

J. Qiu et al.

Summary: This paper presents a machine vision-based strain and damage visualization technique using smart electroluminescent integration for carbon fiber reinforced polymer (CFRP) material inspection. The technique allows for real-time visualization of deformation and cracks in CFRP lamina during progressive axial loading, providing a portable and low-cost alternative to traditional non-destructive testing methods.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Multidisciplinary Sciences

Development of a textile based protein sensor for monitoring the healing progress of a wound

Yomna ElSaboni et al.

Summary: This article focuses on the design and fabrication of flexible textile-based protein sensors to be embedded in wound dressings. The best sensor design was determined and tested for its ability to detect bovine serum albumin.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Effects of Electrodes Layout and Filler Scale on Percolation Threshold and Piezoresistivity Performances of a Cementitious-Based Geocomposite

Mohammadmahdi Abedi et al.

Summary: This study conducted an extensive experimental investigation on the combined effects of surface area, distance between electrodes, and filler scales on the percolation threshold of piezoresistive cement-stabilised sand. The results showed that changes in matrix dimensions had a significant impact on the electrical percolation threshold, with length changes having a greater effect than width and thickness changes. Increasing the aspect ratio of conductive fillers led to a reduction in the percolation threshold. The study also demonstrated the adequacy of using numerical relations to predict the percolation threshold and design self-sensing geocomposites.

NANOMATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Development of Piezoresistive Sensors Based on Graphene Nanoplatelets Screen-Printed on Woven and Knitted Fabrics: Optimisation of Active Layer Formulation and Transversal/Longitudinal Textile Direction

Luisa M. Arruda et al.

Summary: The study investigates the influence of fabric orientation on pressure sensors and finds that woven structures have a higher presence of conductive material. Knitted fabrics show greater sensitivity in the longitudinal direction and a lower coefficient of variation, while woven fabrics show this in the transversal direction. Woven fabrics doped with 5% graphene nanoplatelets in the weftwise direction are the most suitable for piezoresistive sensors.

MATERIALS (2022)

Add to Collection

Article Mechanics

Three-dimensional braided composites as innovative smart structural reinforcements

Mohammadmahdi Abedi et al.

Summary: This study focuses on the development of feasible self-sensing braided composite rods (BCRs) for structural reinforcement and damage monitoring. Different carbon-based conductive fillers were used to reinforce the BCRs, and their mechanical and self-sensing performances were evaluated. The results showed that DCF-reinforced BCRs are the optimum choice for developing a feasible, reliable, and economic structural health monitoring technique.

COMPOSITE STRUCTURES (2022)

Add to Collection

Review Mechanics

Damage monitoring methods for fiber-reinforced polymer joints: A review

Wencai Li et al.

Summary: This paper presents a comprehensive review on damage monitoring methods for fiber-reinforced polymer joints in composite structures. The methods are classified into intrinsic sensing and extrinsic sensing, and their applications in detecting damage type, location, and severity are discussed. The paper also summarizes novel methods, significant results, current trends, and challenges in this field, and recommends further research efforts.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Structural identification of tall buildings: a reinforced concrete structure as a case study

Antonio Gesualdo et al.

Summary: This paper presents an approach to the structural identification of tall buildings, which involves updating the model based on experimental data obtained on a scaled model. The method is applied to a complex building structure in Naples.

CASE STUDIES IN CONSTRUCTION MATERIALS (2021)

Add to Collection

Review Construction & Building Technology

A review of intrinsic self-sensing cementitious composites and prospects for their application in transport infrastructures

Mohammadmahdi Abedi et al.

Summary: Self-sensing cementitious geocomposites offer a more integrated and viable solution for monitoring infrastructures by detecting stress, strain, displacement, and damage through changes in electrical resistance. This technology has the potential to improve sustainability and service life of infrastructures by informing timely interventions and repairs.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Review Polymer Science

Preparation, Properties and Mechanisms of Carbon Fiber/Polymer Composites for Thermal Management Applications

Zulfiqar Ali et al.

Summary: This paper discusses the research progress and application of carbon fiber composites as thermal management materials, focusing on the mechanical properties and thermal conductivity of carbon fiber, as well as its advantages in preparing thermal conduction paths.

POLYMERS (2021)

Add to Collection

Article Mechanics

Fabrication and analysis of integrated multifunctional MWCNTS sensors in glass fiber reinforced polymer composites

Shah Rukh Shahbaz et al.

Summary: This research proposes a strain sensor based on MWCNT for real-time strain and damage detection in GFRP composites. Results indicate that sensors coated with MWCNT show promising piezoresistive characteristics in composite materials, with amide functionalized MWCNT sensors demonstrating the highest strain sensitivity.

COMPOSITE STRUCTURES (2021)

Add to Collection

Review Engineering, Manufacturing

Carbon coated piezoresistive fiber sensors: From process monitoring to structural health monitoring of composites - A review

M. S. Irfan et al.

Summary: Carbon nanomaterial-coated piezoresistive fiber sensors are utilized for in-situ process and structural health monitoring of composites in various industries. These sensors can be embedded in composites by incorporating them in the matrix or depositing them on fibrous reinforcements. Different strategies for coating carbon nanomaterials on fiber reinforcements are discussed, along with the review of monitored parameters during composites manufacturing and damage detection using nanomaterial-coated in-situ sensors. Current and future challenges are highlighted, focusing on new types of 2D materials for next generation smart sensors.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Construction & Building Technology

Effects of multiscale carbon-based conductive fillers on the performances of a self-sensing cementitious geocomposite

Mohammadmahdi Abedi et al.

Summary: The study revealed that the interfacial properties of modified carbon fibers were significantly improved, incorporating a certain amount of hybrid carbon nanotubes and graphene nanoplatelets with carbon fibers can enhance the density, mechanical properties, and durability of cementitious stabilised sand, while also significantly improving the electrical conductivity and piezoresistivity.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Review Mechanics

Smart Composite Structures with Embedded Sensors for Load and Damage Monitoring - A Review

R. Janeliukstis et al.

Summary: Fibre-reinforced polymer (FRP) composite materials are widely used in industries such as aerospace for their lightweight, high strength, and stiffness, but are prone to impact damage. Smart structures with internally embedded sensors offer advantages such as sensor protection, better coupling to the structure, and real-time monitoring without disrupting surface geometry. The review also highlights the limitations associated with sensor embedment, showing the potential for more reliable, cost-effective, and efficient maintenance of transportation and infrastructure.

MECHANICS OF COMPOSITE MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Development of a Novel Multifunctional Cementitious-Based Geocomposite by the Contribution of CNT and GNP

Mohammadmandi Abedi et al.

Summary: The study demonstrated that incorporating hybrid CNTs and GNPs into self-sensing cementitious stabilized sand improved strength, with an optimal concentration of 0.1%. Excessive CNT concentration led to a decrease in strength, while increasing CNT/GNP enhanced durability and piezoresistivity performance of the specimens.

NANOMATERIALS (2021)

Add to Collection

Review Engineering, Civil

Seismic upgrading of existing reinforced concrete buildings: A state-of-the-art review

P. D. Gkournelos et al.

Summary: Strong earthquakes have caused collapses or serious damages to existing buildings, resulting in significant economic losses and loss of human lives. The scientific focus is now on developing techniques for seismic upgrading of existing buildings, particularly reinforced concrete buildings. Retrofitting methods are divided into local measures, which focus on individual elements, and global measures, which address the structure as a whole, with an emphasis on innovative techniques.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Instruments & Instrumentation

Innovative self-sensing fiber-reinforced cemented sand with hybrid CNT/GNP

Mohammadmahdi Abedi et al.

Summary: This study aimed to develop a self-sensing fiber-reinforced cemented sand with high physical, mechanical, durability, and piezoresistivity performances by incorporating different concentrations of Dyneema, glass, and polypropylene fibers. While glass and Dyneema fibers increased the compressive strength and density of the material, PP fibers generally reduced the strength. The study also showed improved interfacial performance and weight loss resistance for Dyneema and glass fiber-reinforced materials.

SMART MATERIALS AND STRUCTURES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Structural Monitoring of Glass Fiber/Epoxy Laminates by Means of Carbon Nanotubes and Carbon Black Self-Monitoring Plies

Lorenzo Paleari et al.

Summary: This study developed a structural health monitoring method using self-monitoring materials, successfully inserting self-monitoring plies into glass-fiber reinforced epoxy-based laminates for monitoring purposes. Nanocomposite epoxy-based resins were developed by mixing different contents of carbon black and multiwall carbon nanotubes, and self-monitoring plies were found to be able to predict residual life and damage occurrences.

NANOMATERIALS (2021)

Add to Collection

Review Materials Science, Composites

A brief review of modified conductive carbon/glass fibre reinforced composites for structural applications: Lightning strike protection, electromagnetic shielding, and strain sensing

S. Das et al.

Summary: The review article discussed how modifying and improving the electrical conductivity of FRP laminates can be used for non-structural applications such as lightning strike protection, EMI shielding, and strain/damage sensing. Different techniques like metal tufting/stitching, conductive resin, coating, and interleaves were discussed for these applications. Metal-tufting and PANI-based conductive resin were found to be effective in resisting lightning damage and performing well in strain sensing and EMI shielding.

COMPOSITES PART C: OPEN ACCESS (2021)

Add to Collection

Article Chemistry, Physical

Scalable and multifunctional carbon nanotube-based textile as distributed sensors for flow and cure monitoring

Hongbo Dai et al.

CARBON (2020)

Add to Collection

Review Chemistry, Physical

Carbon black reborn: Structure and chemistry for renewable energy harnessing

Saeed Khodabakhshi et al.

CARBON (2020)

Add to Collection

Review Optics

Review of high sensitivity fibre-optic pressure sensors for low pressure sensing

E. Vorathin et al.

OPTICS AND LASER TECHNOLOGY (2020)

Add to Collection

Article Optics

High-sensitive Mach-Zehnder interferometer for humidity measurements based on concatenating single-mode concave cone and core-offset

Jie Wang et al.

OPTIK (2020)

Add to Collection

Article Materials Science, Composites

Multifunctional and highly sensitive piezoresistive sensing textile based on a hierarchical architecture

Shaodi Zheng et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Review Chemistry, Physical

Review of Application and Innovation of Geotextiles in Geotechnical Engineering

Hao Wu et al.

MATERIALS (2020)

Add to Collection

Article Geochemistry & Geophysics

Modeling of fiber-optic strain responses to hydraulic fracturing

Zhishuai Zhang et al.

GEOPHYSICS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

An Effective Method for Hybrid CNT/GNP Dispersion and Its Effects on the Mechanical, Microstructural, Thermal, and Electrical Properties of Multifunctional Cementitious Composites

Mohammadmahdi Abedi et al.

JOURNAL OF NANOMATERIALS (2020)

Add to Collection

Review Chemistry, Analytical

Recent Progress of Fiber-Optic Sensors for the Structural Health Monitoring of Civil Infrastructure

Tiange Wu et al.

SENSORS (2020)

Add to Collection

Article Chemistry, Physical

Ultra-Sensitive Affordable Cementitious Composite with High Mechanical and Microstructural Performances by Hybrid CNT/GNP

Mohammadmahdi Abedi et al.

MATERIALS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Development and laboratory evaluation of a self-monitoring polymer geobelts

Jiong Zhang et al.

MEASUREMENT (2020)

Add to Collection

Article Construction & Building Technology

Evaluation of CNT/GNP's synergic effects on the Mechanical, Microstructural, and durability properties of a cementitious composite by the novel dispersion method

Mohammadmahdi Abedi et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Engineering, Environmental

Graphene based nanomaterials for strain sensor application-a review

Ahsan Mehmood et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Article Mechanics

Large-scale deformation and damage detection of 3D printed continuous carbon fiber reinforced polymer-matrix composite structures

Congcong Luan et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A highly stretchable large strain sensor based on PEDOT-thermoplastic polyurethane hybrid prepared via in situ vapor phase polymerization

Pauline May Losaria et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrastretchable Conductive Polymer Complex as a Strain Sensor with a Repeatable Autonomous Self-Healing Ability

Yang Lu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Analytical

Self-Sensing Polymer Composite: White-Light-Illuminated Reinforcing Fibreglass Bundle for Deformation Monitoring

Gergely Hegedus et al.

SENSORS (2019)

Add to Collection

Article Computer Science, Information Systems

Gold/Polyimide-Based Resistive Strain Sensors

Tao Han et al.

ELECTRONICS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Highly conductive ultra-sensitive SWCNT-coated glass fiber reinforcements for laminate composites structural health monitoring

Lazaros Tzounis et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Materials Science, Textiles

Piezoresistive Response of Spray-coated Multiwalled Carbon Nanotube/Glass Fiber/Epoxy Composites under Flexural Loading

J. A. Rodriguez-Gonzalez et al.

FIBERS AND POLYMERS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Structural health monitoring for woven fabric CFRP laminates

A. Alsaadi et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Review Optics

Fiber-optic Fabry-Perot pressure sensor for down-hole application

Xinlei Zhou et al.

OPTICS AND LASERS IN ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Stretchable Conductive Polymers and Composites Based on PEDOT and PEDOT:PSS

Laure Kayser et al.

ADVANCED MATERIALS (2019)

Add to Collection

Review Engineering, Electrical & Electronic

Review of optical fibre sensors for electrical equipment characteristic state parameters detection

Weigen Chen et al.

HIGH VOLTAGE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Doping engineering of conductive polymer hydrogels and their application in advanced sensor technologies

Zhong Ma et al.

CHEMICAL SCIENCE (2019)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Recent Advancements in Wearable & Smart Textiles: An Overview

Kunal Singha et al.

MATERIALS TODAY-PROCEEDINGS (2019)

Add to Collection

Article Chemistry, Physical

Pulsed thermal treatment of carbon up to 3000 °C using an atomic absorption spectrometer

K. J. Putman et al.

CARBON (2018)

Add to Collection

Article Chemistry, Physical

Inkjet printed 2D-crystal based strain gauges on paper

C. Casiraghi et al.

CARBON (2018)

Add to Collection

Article Chemistry, Physical

Hybrid spray-coating, laser-scribing and ink-dispensing of graphene sensors/arrays with tunable piezoresistivity for in situ monitoring of composites

Sida Luo et al.

CARBON (2018)

Add to Collection

Article Materials Science, Composites

Smart-fabric sensor composed of single-walled carbon nanotubes containing binary polymer composites for health monitoring

Shahid Aziz et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Construction & Building Technology

Laboratory investigation of the durability of a new smart geosynthetic material

Jun Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Evaluation of the performance of sensor-enabled geobelts after cyclic loading

Xin-Zhuang Cui et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Engineering, Geological

Laboratory tests on the engineering properties of sensor-enabled geobelts (SEGB)

Xin-zhuang Cui et al.

GEOTEXTILES AND GEOMEMBRANES (2018)

Add to Collection

Review Optics

Biomedical application of optical fibre sensors

R. Correia et al.

JOURNAL OF OPTICS (2018)

Add to Collection

Article Polymer Science

In Situ Strain and Damage Monitoring of GFRP Laminates Incorporating Carbon Nanofibers under Tension

Yanlei Wang et al.

POLYMERS (2018)

Add to Collection

Article Materials Science, Characterization & Testing

The Model of a Fiber-Optic Sensor for Monitoring Mechanical Stresses in Mine Workings

A. V. Yurchenko et al.

RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING (2018)

Add to Collection

Review Chemistry, Analytical

Fibre Bragg Grating Based Strain Sensors: Review of Technology and Applications

Carlo Edoardo Campanella et al.

SENSORS (2018)

Add to Collection

Article Instruments & Instrumentation

Influence of seawater ageing on the mechanical and damage self-sensing capability of glass fiber-MWCNT/epoxy laminates subjected to flexural loading by means of the electrical resistance approach

J. A. Rodriguez-Gonzalez et al.

SMART MATERIALS AND STRUCTURES (2018)

Add to Collection

Article Materials Science, Composites

Influence of the Hybrid Combination of Multiwalled Carbon Nanotubes and Graphene Oxide on Interlaminar Mechanical Properties of Carbon Fiber/Epoxy Laminates

J. A. Rodriguez-Gonzalez et al.

APPLIED COMPOSITE MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Crack patterns identification in masonry structures with a C degrees displacement energy method

Antonino Iannuzzo et al.

INTERNATIONAL JOURNAL OF MASONRY RESEARCH AND INNOVATION (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Stretchable Ti3C2Tx MXene/Carbon Nanotube Composite Based Strain Sensor with Ultrahigh Sensitivity and Tunable Sensing Range

Yichen Cai et al.

ACS NANO (2018)

Add to Collection

Article Engineering, Mechanical

Detection of Sinkhole Formation by Strain Profile Measurements Using BOTDR: Simulation Study

Raphael Linker et al.

JOURNAL OF ENGINEERING MECHANICS (2017)

Add to Collection

Article Chemistry, Analytical

New Textile Sensors for In Situ Structural Health Monitoring of Textile Reinforced Thermoplastic Composites Based on the Conductive Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) Polymer Complex

Ivona Jerkovic et al.

SENSORS (2017)

Add to Collection

Review Chemistry, Analytical

Optical Fibre Sensors Using Graphene-Based Materials: A Review

Miguel Hernaez et al.

SENSORS (2017)

Add to Collection

Review Engineering, Electrical & Electronic

Recent progress of using Brillouin distributed fiber optic sensors for geotechnical health monitoring

Hong Cheng-Yu et al.

SENSORS AND ACTUATORS A-PHYSICAL (2017)

Add to Collection

Article Engineering, Mechanical

Detection of Sinkhole Formation by Strain Profile Measurements Using BOTDR: Simulation Study

Raphael Linker et al.

JOURNAL OF ENGINEERING MECHANICS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Stretchable, Ultrasensitive, and Wearable Strain Sensors Based on Facilely Prepared Reduced Graphene Oxide Woven Fabrics in an Ethanol Flame

Biao Yin et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Materials Science, Composites

Graphene coated piezo-resistive fabrics for liquid composite molding process monitoring

Muhammad A. Ali et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

Flowing suspensions of carbon black with high electronic conductivity for flow applications: Comparison between carbons black and exhibition of specific aggregation of carbon particles

H. Parant et al.

CARBON (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Design of Electrically Conductive Structural Composites by Modulating Aligned CVD-Grown Carbon Nanotube Length on Glass Fibers

Delong He et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Materials Science, Composites

Carbon nanotubes grown on carbon fiber yarns by a low temperature CVD method: A significant enhancement of the interfacial adhesion between carbon fiber/epoxy matrix hierarchical composites

Marcos Felisberto et al.

COMPOSITES COMMUNICATIONS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Sensory carbon fiber based textile-reinforced concrete for smart structures

Yiska Goldfeld et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2016)

Add to Collection

Article Materials Science, Characterization & Testing

Sensor-Enabled Geogrids for Performance Monitoring of Reinforced Soil Structures

Hessam Yazdani et al.

JOURNAL OF TESTING AND EVALUATION (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Large-Area Ultrathin Graphene Films by Single-Step Marangoni Self-Assembly for Highly Sensitive Strain Sensing Application

Xinming Li et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Engineering, Environmental

Graphene oxide based molecularly imprinted polymers with double recognition abilities: The combination of covalent boronic acid and traditional non-covalent monomers

Shucheng Liu et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Add to Collection

Article Engineering, Manufacturing

In situ process monitoring of hierarchical micro-/nano-composites using percolated carbon nanotube networks

Joel Renaud Ngouanom Gnidakouong et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Article Engineering, Manufacturing

Multi-walled carbon nanotube-filled polyvinyl chloride composites: Influence of processing method on dispersion quality, electrical conductivity and mechanical properties

Hessam Yazdani et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Article Materials Science, Composites

The preparation of reduced graphene oxide-TiO2 composite materials towards transparent, strain sensing and photodegradation multifunctional films

Yong Liu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Composites

Facile green fabrication of well dispersed poly(vinylidene fluoride)/graphene oxide nanocomposites with improved properties

Jun Tong et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Composites

Comparative study on monitoring structural damage in fiber-reinforced polymers using glass fibers with carbon nanotubes and graphene coating

Bin Hao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Engineering, Geological

A review of the performance of geosynthetics for environmental protection

N. Touze-Foltz et al.

GEOTEXTILES AND GEOMEMBRANES (2016)

Add to Collection

Article Polymer Science

Electrical conductivity and mechanical performance of multiwalled CNT-filled polyvinyl chloride composites subjected to tensile load

Hessam Yazdani et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Modeling the Bit-Error-Rate Performance of Nonlinear Fiber-Optic Systems

Ori Golani et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2016)

Add to Collection

Article Engineering, Multidisciplinary

Experimental evaluation of a distributed Brillouin sensing system for measuring extensional and shear deformation in rock

Behrad Madjdabadi et al.

MEASUREMENT (2016)

Add to Collection

Article Optics

Optical sensing and monitoring architecture for pipelines using optical heterodyning and FBG filter

Abhinav Gautam et al.

OPTIK (2016)

Add to Collection

Review Chemistry, Analytical

A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications

Antonio Barrias et al.

SENSORS (2016)

Add to Collection

Article Instruments & Instrumentation

Deformation monitoring of long GFRP bar soil nails using distributed optical fiber sensing technology

Cheng-Yu Hong et al.

SMART MATERIALS AND STRUCTURES (2016)

Add to Collection

Article Materials Science, Multidisciplinary

A highly stretchable and sensitive strain sensor based on graphene-elastomer composites with a novel double-interconnected network

Yong Lin et al.

JOURNAL OF MATERIALS CHEMISTRY C (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Controlling the mechanical behavior of dual-material 3D printed meta-materials for patient-specific tissue-mimicking phantoms

Kan Wang et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Chemistry, Multidisciplinary

CNT-grafted glass fibers as a smart tool for epoxy cure monitoring, UV-sensing and thermal energy harvesting in model composites

L. Tzounis et al.

RSC ADVANCES (2016)

Add to Collection

Proceedings Paper Transportation

Innovative approach in the use of geotextiles for failures prevention in railway embankments

Clemente Fuggini et al.

TRANSPORT RESEARCH ARENA TRA2016 (2016)

Add to Collection

Proceedings Paper Engineering, Geological

Development of Smart Braided Structures for Sensing of Geotechnical Structures

Sohel Rana et al.

ADVANCES IN TRANSPORTATION GEOTECHNICS III (2016)

Add to Collection

Review Engineering, Geological

Sensor-Enabled Geogrids for Stabilization and Performance Monitoring of Earth Structures: State of Development

Hessam Yazdani et al.

INTERNATIONAL JOURNAL OF GEOSYNTHETICS AND GROUND ENGINEERING (2016)

Add to Collection

Review Materials Science, Multidisciplinary

A review on smart self-sensing composite materials for civil engineering applications

Sohel Rana et al.

AIMS MATERIALS SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Bio-inspired cross-linking with borate for enhancing gas-barrier properties of poly(vinyl alcohol)/graphene oxide composite films

Cheng-Lee Lai et al.

CARBON (2015)

Add to Collection

Article Engineering, Environmental

TiO2 loaded on graphene nanosheet as reinforcer and its effect on the thermal behaviors of poly(vinyl chloride) composites

Xiaming Feng et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Nanostructured conductive polymers for advanced energy storage

Ye Shi et al.

CHEMICAL SOCIETY REVIEWS (2015)

Add to Collection

Article Chemistry, Physical

Grafting of Polyimide onto Chemically-Functionalized Graphene Nanosheets for Mechanically-Strong Barrier Membranes

Jun Lim et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection

Article Engineering, Manufacturing

Three-dimensional imaging and quantitative analysis of dispersion and mechanical failure in filled nanocomposites

Benjamin E. Smith et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Add to Collection

Article Engineering, Manufacturing

Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepreg

Han Zhang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Add to Collection

Article Chemistry, Analytical

A highly sensitive SPR biosensor based on a graphene oxide sheet modified with gold bipyramids, and its application to an immunoassay for rabbit IgG

Qiong Wu et al.

MICROCHIMICA ACTA (2015)

Add to Collection

Review Polymer Science

Recent advances in the synthesis and applications of graphene-polymer nanocomposites

Mingfa Zhang et al.

POLYMER CHEMISTRY (2015)

Add to Collection

Review Chemistry, Analytical

Review of Trackside Monitoring Solutions: From Strain Gages to Optical Fibre Sensors

Georges Kouroussis et al.

SENSORS (2015)

Add to Collection

Article Chemistry, Analytical

Carbon Fiber Epoxy Composites for Both Strengthening and Health Monitoring of Structures

Rita Salvado et al.

SENSORS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Distributed Measurement of Temperature for PCC Energy Pile Using BOFDA

Lei Gao et al.

JOURNAL OF SENSORS (2015)

Add to Collection

Article Engineering, Manufacturing

Optimization of fused deposition modeling process parameters: a review of current research and future prospects

Omar A. Mohamed et al.

ADVANCES IN MANUFACTURING (2015)

Add to Collection

Article Construction & Building Technology

Optical fiber-based sensors with flexible encapsulation for pavement behavior monitoring

Wanqiu Liu et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2015)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Strain and damage sensing in polymer composites and nanocomposites with conducting fillers

P. Pissis et al.

ICSI 2015 THE 1ST INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY FUNCHAL (2015)

Add to Collection

Article Engineering, Civil

The monitoring of an existing cast iron tunnel with distributed fibre optic sensing (DFOS)

C. Y. Gue et al.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2015)

Add to Collection

Proceedings Paper Engineering, Mechanical

A comparative study of a self strain-monitoring carbon nanotube film and carbon fibers under flexural loading by electrical resistance changes

B. Pinto et al.

11TH INTERNATIONAL CONFERENCE ON DAMAGE ASSESSMENT OF STRUCTURES (DAMAS 2015) (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Graphite Nanoplatelet Enabled Embeddable Fiber Sensor for in Situ Curing Monitoring and Structural Health Monitoring of Polymeric Composites

Sida Luo et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection

Article Chemistry, Physical

Highly thermal conductive composites with polyamide-6 covalently-grafted graphene by an in situ polymerization and thermal reduction process

Peng Ding et al.

CARBON (2014)

Add to Collection

Article Chemistry, Physical

Strain-sensitive conductivity of carbon black-filled PVC composites subjected to cyclic loading

Hessam Yazdani et al.

CARBON (2014)

Add to Collection

Article Chemistry, Physical

The interphase microstructure and electrical properties of glass fibers covalently and non-covalently bonded with multiwall carbon nanotubes

Lazaros Tzounis et al.

CARBON (2014)

Add to Collection

Article Chemistry, Physical

Health monitoring of structural composites with embedded carbon nanotube coated glass fiber sensors

J. Sebastian et al.

CARBON (2014)

Add to Collection

Article Engineering, Environmental

A facile method to produce graphene oxide-g-poly(L-lactic acid) as an promising reinforcement for PLLA nanocomposites

Wenxiao Li et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Modeling of Nonlinear Signal Distortion in Fiber-Optic Networks

Pontus Johannisson et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2014)

Add to Collection

Article Engineering, Chemical

Integrated leakage detection and localization model for gas pipelines based on the acoustic wave method

Hao Jin et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2014)

Add to Collection

Article Engineering, Chemical

Experimental study of leakage detection of natural gas pipeline using FBG based strain sensor and least square support vector machine

Qingmin Hou et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Scalable fabrication of high-performance and flexible graphene strain sensors

He Tian et al.

NANOSCALE (2014)

Add to Collection

Article Materials Science, Multidisciplinary

A decade of graphene research: production, applications and outlook

Edward P. Randviir et al.

MATERIALS TODAY (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Design and experimental study on FBG hoop-strain sensor in pipeline monitoring

Liang Ren et al.

OPTICAL FIBER TECHNOLOGY (2014)

Add to Collection

Article Engineering, Electrical & Electronic

The development of screen printed conductive networks on textiles for biopotential monitoring applications

Gordon Paul et al.

SENSORS AND ACTUATORS A-PHYSICAL (2014)

Add to Collection

Article Materials Science, Multidisciplinary

A Single Glass Fiber with Ultrathin Layer of Carbon Nanotube Networks Beneficial to In-Situ Monitoring of Polymer Properties in Composite Interphases

Jie Zhang et al.

SOFT MATERIALS (2014)

Add to Collection

Article Multidisciplinary Sciences

Development of Hybrid Braided Composite Rods for Reinforcement and Health Monitoring of Structures

Sohel Rana et al.

SCIENTIFIC WORLD JOURNAL (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Tensoresistive PVC Coating for Sensor-Enabled Geogrids

Kianoosh Hatami et al.

JOURNAL OF NANOMECHANICS AND MICROMECHANICS (2014)

Add to Collection

Article Chemistry, Physical

The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites

Long-Cheng Tang et al.

CARBON (2013)

Add to Collection

Article Materials Science, Composites

Polypropylene/graphene nanosheet nanocomposites by in situ polymerization: Synthesis, characterization and fundamental properties

Marceo A. Milani et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Engineering, Civil

Study of ballastless track structure monitoring by distributed optical fiber sensors on a real-scale mockup in laboratory

X. Chapeleau et al.

ENGINEERING STRUCTURES (2013)

Add to Collection

Article Engineering, Multidisciplinary

A distributed self-sensing FRP anchor rod with built-in optical fiber sensor

Minghua Huang et al.

MEASUREMENT (2013)

Add to Collection

Review Engineering, Multidisciplinary

Optical fibre-based sensor technology for humidity and moisture measurement: Review of recent progress

L. Alwis et al.

MEASUREMENT (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Novel optical fiber humidity sensor based on a no-core fiber structure

Li Xia et al.

SENSORS AND ACTUATORS A-PHYSICAL (2013)

Add to Collection

Article Engineering, Civil

Braided composite rods: Innovative fibrous materials for geotechnical applications

Raul Fangueiro et al.

GEOMECHANICS AND ENGINEERING (2013)

Add to Collection

Article Geochemistry & Geophysics

Long term structural health monitoring by Brillouin fibre-optic sensing: a real case

Aldo Minardo et al.

JOURNAL OF GEOPHYSICS AND ENGINEERING (2012)

Add to Collection

Article Engineering, Geological

Analytical Study on Progressive Pullout Behavior of a Soil Nail

Cheng-Yu Hong et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2012)

Add to Collection

Article Engineering, Chemical

Effect of carbon black structure on low-strain conductivity of polypropylene and low-density polyethylene composites

Atefeh Fathi et al.

POLYMER ENGINEERING AND SCIENCE (2012)

Add to Collection

Article Chemistry, Analytical

Polyvinyl alcohol coated photonic crystal optical fiber sensor for humidity measurement

Wei Chang Wong et al.

SENSORS AND ACTUATORS B-CHEMICAL (2012)

Add to Collection

Article Physics, Applied

Strain dependent resistance in chemical vapor deposition grown graphene

Xue-Wen Fu et al.

APPLIED PHYSICS LETTERS (2011)

Add to Collection

Article Engineering, Multidisciplinary

Damage detection of carbon fiber reinforced polymer composites via electrical resistance measurement

Jie Wen et al.

COMPOSITES PART B-ENGINEERING (2011)

Add to Collection

Article Polymer Science

Morphology and physical properties of poly(ethylene oxide) loaded graphene nanocomposites prepared by two different techniques

Waleed E. Mahmoud

EUROPEAN POLYMER JOURNAL (2011)

Add to Collection

Article Engineering, Geological

Performance Monitoring of a Secant-Piled Wall Using Distributed Fiber Optic Strain Sensing

Hisham Mohamad et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2011)

Add to Collection

Article Chemistry, Physical

Preparation and properties of graphene oxide/polyimide composite films with low dielectric constant and ultrahigh strength via in situ polymerization

Jen-Yu Wang et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Add to Collection

Article Polymer Science

Importance of Covalent Linkages in the Preparation of Effective Reduced Graphene Oxide-Poly(vinyl chloride) Nanocomposites

Horacio J. Salavagione et al.

MACROMOLECULES (2011)

Add to Collection

Article Polymer Science

Fabrication of exfoliated graphene-based polypropylene nanocomposites with enhanced mechanical and thermal properties

Pingan Song et al.

POLYMER (2011)

Add to Collection

Article Chemistry, Analytical

A low cost fiber-optic humidity sensor based on silica sol-gel film

Zhongjun Zhao et al.

SENSORS AND ACTUATORS B-CHEMICAL (2011)

Add to Collection

Article Engineering, Civil

Monitoring of tension force and load transfer of ground anchor by using optical FBG sensors embedded tendon

Young-Sang Kim et al.

SMART STRUCTURES AND SYSTEMS (2011)

Add to Collection

Article Instruments & Instrumentation

Fiber-Optic Sensor Applications in Civil and Geotechnical Engineering

Wolfgang R. Habel et al.

PHOTONIC SENSORS (2011)

Add to Collection

Article Engineering, Civil

Evaluation of a large-scale bridge strain, temperature and crack monitoring with distributed fibre optic sensors

Merit Enckell et al.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2011)

Add to Collection

Proceedings Paper Construction & Building Technology

Characteristics and Application of BOTDR in Distributed Detection of Pile Foundation

Chunde Piao et al.

ADVANCES IN STRUCTURES, PTS 1-5 (2011)

Add to Collection

Article Biophysics

Membraneless enzymatic biofuel cells based on graphene nanosheets

Chang Liu et al.

BIOSENSORS & BIOELECTRONICS (2010)

Add to Collection

Article Chemistry, Physical

Graphene/Polyurethane Nanocomposites for Improved Gas Barrier and Electrical Conductivity

Hyunwoo Kim et al.

CHEMISTRY OF MATERIALS (2010)

Add to Collection

Article Engineering, Geological

Behaviour of an old masonry tunnel due to tunnelling-induced ground settlement

H. Mohamad et al.

GEOTECHNIQUE (2010)

Add to Collection

Article Polymer Science

Recent Developments Concerning the Dispersion of Carbon Nanotubes in Polymers

Brian P. Grady

MACROMOLECULAR RAPID COMMUNICATIONS (2010)

Add to Collection

Article Materials Science, Multidisciplinary

An electrically conducting polymer/graphene composite with a very low percolation threshold

Huan Pang et al.

MATERIALS LETTERS (2010)

Add to Collection

Article Polymer Science

Electrically conductive polyethylene terephthalate/graphene nanocomposites prepared by melt compounding

Hao-Bin Zhang et al.

POLYMER (2010)

Add to Collection

Article Engineering, Geological

Optical fibre strain measurement for tunnel lining monitoring

L. L. K. Cheung et al.

PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-GEOTECHNICAL ENGINEERING (2010)

Add to Collection

Article Engineering, Civil

Assessment of London underground tube tunnels - investigation, monitoring and analysis

Peter Wright

SMART STRUCTURES AND SYSTEMS (2010)

Add to Collection

Article Construction & Building Technology

Feasibility study of automated detection of tunnel excavation by Brillouin optical time domain reflectometry

Assaf Klar et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2010)

Add to Collection

Article Polymer Science

Effect of Dopant Type on the Properties of Polyaniline

Surajit Sinha et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Add to Collection

Article Materials Science, Composites

Electrical and Mechanical Properties of Polypropylene/Carbon Black Composites

Yasin Kanbur et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)

Add to Collection

Article Engineering, Geological

Test on application of distributed fiber optic sensing technique into soil slope monitoring

Bao-jun Wang et al.

LANDSLIDES (2009)

Add to Collection

Article Engineering, Multidisciplinary

Soil-embedded optical fiber sensing cable interrogated by Brillouin optical time-domain reflectometry (B-OTDR) and optical frequency-domain reflectometry (OFDR) for embedded cavity detection and sinkhole warning system

V. Lanticq et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Electromagnetic interference (EMI) shielding effectiveness of PP/PS polymer blends containing high structure carbon black

Mohammed H. Al-Saleh et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2008)

Add to Collection

Article Instruments & Instrumentation

Design, manufacture and testing of self-sensing carbon fibre-glass fibre reinforced polymer rods

F. Nanni et al.

SMART MATERIALS AND STRUCTURES (2007)

Add to Collection

Article Chemistry, Physical

Functionalization of carbon nanotubes using a silane coupling agent

Peng Cheng Ma et al.

CARBON (2006)

Add to Collection

Article Engineering, Electrical & Electronic

Detection of buckling in steel pipeline and column by the distributed Brillouin sensor

Fabien Ravet et al.

OPTICAL FIBER TECHNOLOGY (2006)

Add to Collection

Article Multidisciplinary Sciences

Graphene-based composite materials

Sasha Stankovich et al.

NATURE (2006)

Add to Collection

Article Instruments & Instrumentation

Self-sensing CF-GFRP rods as mechanical reinforcement and sensors of concrete beams

F Nanni et al.

SMART MATERIALS & STRUCTURES (2006)

Add to Collection

Article Engineering, Geological

Numerical model for reinforced soil segmental walls under surcharge loading

Kianoosh Hatami et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2006)

Add to Collection

Article Materials Science, Composites

Memorizing maximum strain in carbon-fiber-reinforced plastic composites by measuring electrical resistance under pre-tensile stress

Y Okuhara et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2005)

Add to Collection

Article Engineering, Geological

Studies on scaling and instrumentation of a geogrid

BVS Viswanadham et al.

GEOTEXTILES AND GEOMEMBRANES (2004)

Add to Collection

Article Engineering, Geological

Simplified analysis method for micropile pullout behavior

A Misra et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2004)

Add to Collection

Article Engineering, Geological

A study of soil-reinforcement interface friction

ZG Wang et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2002)

Add to Collection

Article Engineering, Chemical

Interlaminar damage in carbon fiber polymer-matrix composites, studied by electrical resistance measurement

SK Wang et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2001)

Add to Collection

Article Engineering, Geological

Strain measurement and interpretation of stabilising force in geogrid reinforcement

CT Gnanendran et al.

GEOTEXTILES AND GEOMEMBRANES (2001)

Add to Collection

Article Materials Science, Composites

Self-monitoring, pseudo-ductile, hybrid FRP reinforcement rods for concrete applications

CE Bakis et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.