☆ 4.6 Article

Sustainable Mitigation Strategies for Urban Heat Island Effects in Urban Areas

SUSTAINABILITY (2023)

Related references

Note: Only part of the references are listed.

Article Environmental Sciences

Impact of different roofing mitigation strategies on near-surface temperature and energy consumption over the Chicago metropolitan area during a heatwave event

Haochen Tan et al.

Summary: This study investigates the impact of cool roofs, green roofs, and solar panel roofs on near-surface temperature and cooling energy demand through regional modeling in the Chicago metropolitan area. The results show that cool roofs have the largest cooling effect and are the most effective mitigation strategy. In terms of reducing energy consumption, cool roofs, green roofs, and solar panel roofs can lead to reductions of 16.6%, 14.0%, and 7.6%, respectively.

SCIENCE OF THE TOTAL ENVIRONMENT (2023)

Add to Collection

Article Green & Sustainable Science & Technology

Groundwater Pollution Impact on Food Security

Abdul Munaf Mohamed Irfeey et al.

Summary: Global food security is threatened by a growing population and its increasing food demands. Safer and higher-quality agriculture, particularly irrigation with safer water sources such as groundwater, is crucial for ensuring food security. However, groundwater contamination from various sources poses a major challenge.

SUSTAINABILITY (2023)

Add to Collection

Review Green & Sustainable Science & Technology

Urban Greening as a Response to Climate-Related Heat Risk: A Social-Geographical Review

Jan Petzold et al.

Summary: With the increasing severity of heat waves, urban areas require effective adaptation measures, especially for vulnerable groups. However, there is still limited understanding of where and for whom urban greening should be implemented. A systematic review reveals research gaps in terms of geographical bias and lack of socio-economic assessments of urban greening. Addressing these issues is crucial for achieving sustainable development goals amid urbanization and intensifying heat risks.

SUSTAINABILITY (2023)

Add to Collection

Article Construction & Building Technology

Measuring the relationship between morphological spatial pattern of green space and urban heat island using machine learning methods

Jinyao Lin et al.

Summary: The study explores the impact of the morphological spatial pattern of land use on urban heat island (UHI) intensity using machine learning methods. The findings suggest that the morphological characteristics of green space, such as cores, perforations, loops, and islets, have significant influences on UHI intensity. Large core areas are more effective in mitigating UHI than a large number of small islets.

BUILDING AND ENVIRONMENT (2023)

Add to Collection

Article Construction & Building Technology

Thermal transfer and temperature reductions from shading systems on opaque facades: Quantifying the impacts of influential factors

Iqbal Shah et al.

Summary: With the rapid development of cities and global warming, Urban Heat Island (UHI) and building cooling energy consumption have become a dangerous concern. The use of shading systems on building fenestrations is an effective strategy to reduce heat gain and glare, resulting in lower cooling energy consumption and improved indoor comfort. This study examines the effects of shading systems on opaque facades and recommends considerations for their selection and the development of a more accurate OTTV equation.

ENERGY AND BUILDINGS (2023)

Add to Collection

Article Environmental Sciences

Land use/land cover change and its impact on surface urban heat island and urban thermal comfort in a metropolitan city

Shahfahad et al.

Summary: This research analyzed the impact of land use/land cover change on urban heat island intensity and thermal comfort in Delhi from 1991 to 2018 using Landsat datasets and geographically weighted regression. The findings show that the increase in built-up area has led to higher surface temperature and urban heat island intensity, resulting in decreased thermal comfort in the city.

URBAN CLIMATE (2022)

Add to Collection

Review Engineering, Environmental

Progress of functionalized TiO2-based nanomaterials in the construction industry: A comprehensive review

Marcin Janczarek et al.

Summary: The intensive development of construction in recent years has led to increasing attention from construction scientists towards new material solutions based on nanotechnology, such as the use of titanium dioxide in building materials. This article focuses on the modification of nanotitania to enhance its photocatalytic properties and analyzes its effects on self-cleaning, air-depolluting, and antibacterial properties of building materials, particularly cement-based composites. It also examines the mechanical and durability properties of TiO2-modified building materials, considering dispersion methods, rheological and mechanical parameters, and resistance to external factors.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Construction & Building Technology

Anthropogenic heating of the urban environment: An investigation of feedback dynamics between urban micro-climate and decomposed anthropogenic heating from buildings

Pouya Vahmani et al.

Summary: This study assesses the implications of anthropogenic heating for urban micro-climate dynamics using building energy modeling and a high-resolution urban micro-climate modeling framework. The findings show that anthropogenic heating from building exhaust has a more significant impact on local air temperature during the night, compared to anthropogenic heating from HVAC systems. Moreover, the two components of anthropogenic heating exhibit offsetting behaviors under increasing outdoor temperatures. A detailed understanding of the composition of anthropogenic heating specific to an urban environment is necessary to predict its diurnal dynamics and response to a warming climate.

BUILDING AND ENVIRONMENT (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Toward Carbon-Neutral Concrete through Biochar-Cement-Calcium Carbonate Composites: A Critical Review

Dahl Winters et al.

Summary: This paper explores the potential of using biochar, calcium carbonate, and cement as carbon storage materials to create carbon-neutral concrete. The system can store atmospherically absorbed CO2, reducing carbon in the atmosphere, and also helps reduce cement usage and CO2 emissions. Additionally, this composite material can be used in building structures, providing positive environmental and social impact.

SUSTAINABILITY (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Cool Pavements: State of the Art and New Technologies

Sophia Kappou et al.

Summary: This paper presents an extensive analysis of the state of the art of cool pavements, including their properties, types, applications, and maintenance technologies. The research results demonstrate the significant temperature reduction potential of cool pavements in urban environments.

SUSTAINABILITY (2022)

Add to Collection

Article Engineering, Multidisciplinary

The effectiveness of urban green infrastructure in reducing surface urban heat island

Maryam F. Abdulateef et al.

Summary: This study assesses the effectiveness of urban green infrastructure (UGI) in reducing surface urban heat island (SUHI) in Baghdad city. The results show that UGI plays an apparent role in declining surface temperature (Ts) in both models, and the cooling effects of UGI are convergent on similar surfaces of the two models.

AIN SHAMS ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Multidisciplinary

Evaluation of thermal comfort and urban heat island through cool paving materials using ENVI-Met

Riham Nady Faragallah et al.

Summary: This paper aims to provide thermal comfort and promote sustainable urban development in Alexandria city (Egypt), addressing the issue of increasing urban heat island. The study provides solutions for maximizing thermal comfort through the use of different paving materials and explains the concept of urban heat island phenomenon and its mitigation strategies.

AIN SHAMS ENGINEERING JOURNAL (2022)

Add to Collection

Article Environmental Studies

The impacts of greenery on urban climate and the options for use of thermal data in urban areas

Petra Hesslerova et al.

Summary: This paper introduces the impact of urban greenery on urban climate and proposes a method to quantify the role of vegetation as an air conditioning system, providing the possibility of implementing it in spatial planning.

PROGRESS IN PLANNING (2022)

Add to Collection

Review Green & Sustainable Science & Technology

The business of accelerating sustainable urban development: A systematic review and synthesis

Daina Mazutis et al.

Summary: Given the rapid pace of population growth, urbanization and construction, businesses in the built environment industry play a critical role in ensuring a more sustainable future. However, our understanding of the role of businesses in sustainable urban development is still unclear. To address this issue, a comprehensive review of the literature on business and sustainable urban development was conducted, providing a synthesis of findings, an evidence-based theoretical model and an outline of contributions to sustainability literature.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Development of an Eco-Design Tool for a Circular Approach to Building Renovation Projects

Ines Bourgeois et al.

Summary: Considering the impact of the construction sector on the environment, there is a need to change the approach to designing and proposing solutions for new construction or renovation projects. The development of an eco-design tool and procedure can help integrate circular design and sustainability concepts into the decision-making process, enabling designers to make choices that align with sustainability goals. The eco-design tool tested in a building renovation case study proved to be effective in providing quantitative information on environmental and economic impacts, allowing designers to make informed decisions based on sustainability and circularity considerations.

SUSTAINABILITY (2022)

Add to Collection

Article Environmental Studies

Anticipatory Regulation: Lessons from fracking and insights for Greenhouse Gas Removal innovation and governance

Miriam Aczel et al.

Summary: The UK's inclusion of a net-zero emissions target in national legislation necessitates the exploration of Greenhouse Gas Removal (GGR) options. This study examines the governance and implications of the UK's experience with shale gas in relation to the development and widespread deployment of GGR. The research highlights the risk of top-down governance and the need for transparency and stakeholder participation in decision-making to ensure social legitimacy and successful technological innovation.

ENERGY RESEARCH & SOCIAL SCIENCE (2022)

Add to Collection

Article

Overview of Green Roof Technology as a Prospective Energy Preservation Technique in Arid Regions

A. S. Mahmoud

Engineering Technology & Applied Science Research (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Modular Assembly of Mechanoresponsive Color-Changing Materials from Hydrogel-Based Photonic Crystal Microspheres

Golnaz Isapour et al.

Summary: This article proposes a scalable fabrication concept for mechanoresponsive, soft, photonic materials with tunable structural coloration. The materials are assembled from microscale building blocks and demonstrate reversible, dynamic color changes in response to mechanical deformation. They have potential applications in sensing systems or visual communication.

ADVANCED PHOTONICS RESEARCH (2022)

Add to Collection

Review Construction & Building Technology

Materials to Mitigate the Urban Heat Island Effect for Cool Pavement: A Brief Review

Zheng Wang et al.

Summary: The urban heat island (UHI) effect has a negative impact on the urban living environment. The development of cool pavement technology aims to mitigate the UHI effect caused by asphalt pavement. This mini-review article summarizes the theoretical and practical factors of solar reflective coatings and phase-change materials, which are crucial for the design of new materials. It also discusses the main challenges and potential solutions. The article provides basic knowledge for the development of new solar reflective pavement materials and serves as a guide for the practical application of cool pavement.

BUILDINGS (2022)

Add to Collection

Review Construction & Building Technology

Nature-Based Solutions (NBSs) to Mitigate Urban Heat Island (UHI) Effects in Canadian Cities

Alexander Thomas Hayes et al.

Summary: Canada is experiencing a faster rate of warming compared to the global average, with urban surfaces contributing significantly to the urban heat island (UHI) phenomenon. The Canadian government aims to combat the effects of UHI through nature-based solutions (NBSs). This review analyzes two NBSs techniques - increasing surface greenery/vegetation and increasing surface reflectivity - and highlights the need for comprehensive analysis and tools to evaluate the effectiveness of NBSs in mitigating UHI effects.

BUILDINGS (2022)

Add to Collection

Article Environmental Sciences

Energy and mass exchange at an urban site in mountainous terrain - the Alpine city of Innsbruck

Helen Claire Ward et al.

Summary: This study provides a detailed analysis of multi-year near-surface turbulence observations in an urban area located in highly complex terrain. The findings show that the energy and mass exchange in this area are affected by the urban surface, orographic setting, and mountain weather. Additionally, anthropogenic activities and the thermal mass of the urban surface contribute to positive sensible heat fluxes in the city throughout the year.

ATMOSPHERIC CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Environmental Sciences

Suitability indices for assessing functional quality of urban surface water

E. S. van der Meulen et al.

Summary: This article proposes a method to assess the functional quality of urban surface waters using suitability indices (SIs). The approach extends traditional water quality parameters with other characteristics to determine the suitability for specific human uses. The study demonstrates the effectiveness of the protocol by developing SIs for three specific urban water use functions. The application of the suitability indices in a case study in Amsterdam provides spatially explicit information about the suitability of surface waters for the selected use functions.

CITY AND ENVIRONMENT INTERACTIONS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Improvement of thermal and optical responses of short-term aged thermochromic asphalt binder by warm-mix asphalt technology

Zihao Chen et al.

Summary: Thermochromic asphalt materials can reduce mixing and compaction temperatures, increase optical reflectance, lower pavement temperature, decrease heat release to urban atmosphere, improve urban microclimate, and contribute to sustainable development through warm-mix asphalt technology.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Recent Advances on Molecular Crystalline Luminescent Materials for Optical Waveguides

Siqin Wu et al.

Summary: Molecule-based fluorescent materials with optical waveguides (MFOWs) have unique photoluminescence properties and cover the entire visible light region. Research progress on MFOWs and emerging materials for high-performance applications are summarized, offering potential guidance for future design and development of MFOWs.

ADVANCED OPTICAL MATERIALS (2021)

Add to Collection

Article Environmental Sciences

Effect of eco-friendly pervious concrete with amorphous metallic fiber on evaporative cooling performance

Ji Hun Park et al.

Summary: Pervious concrete is an eco-friendly pavement material that allows water to percolate through its porous structure, solving environmental issues caused by impervious pavements in cities. The study shows that pervious concrete made with blast-furnace slag and amorphous metallic fibers has good water absorption and thermal conductivity, allowing faster evaporation of water and enhancing the evaporative cooling effect.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Growing Biodiverse Urban Futures: Renaturalization and Rewilding as Strategies to Strengthen Urban Resilience

Steffen Lehmann

Summary: The article explores how cities are utilizing nature-based solutions to address challenges like climate change, biodiversity loss, and resource depletion. It emphasizes the opportunities and benefits of regreening and rewilding urban areas, as well as the integration of nature-based solutions in urban planning to enhance resilience and halt biodiversity decline. Through rewilding initiatives, cities are witnessing the return of butterflies, insects, birds, and wildlife in less-managed spaces, ultimately providing essential contact with nature for human well-being and a better quality of life.

SUSTAINABILITY (2021)

Add to Collection

Article Construction & Building Technology

Perceptions of urban heat island mitigation and implementation strategies: survey and gap analysis

Chenghao Wang et al.

Summary: The study reveals that the perceptions of professional respondents are largely influenced by their geographic areas and there are gaps in public education on UHI mitigation, effective communication between researchers and code writers, implementation of UHI mitigation strategies in some countries, and trustworthy information shared on social media. Bridging these gaps is crucial for fostering public engagement and improving the effectiveness of UHI mitigation measures.

SUSTAINABLE CITIES AND SOCIETY (2021)

Add to Collection

Article Construction & Building Technology

Effects of Different Urban-Vegetation Morphology on the Canopy-level Thermal Comfort and the Cooling Benefits of Shade Trees: Case-study in Philadelphia

Samain Sabrin et al.

Summary: Urban morphology plays a significant role in affecting heating or cooling rates in street canopies. Planting trees in residential and mixed-use sites with higher Sky-view factor (SVF) can improve pedestrian comfort in the long term, while commercial sites with lower SVF and surface temperature receive less cooling benefit from street trees.

SUSTAINABLE CITIES AND SOCIETY (2021)

Add to Collection

Article Chemistry, Physical

Development of Water Retentive and Thermal Resistant Cement Concrete and Cooling Effects Evaluation

Xiaowei Wang et al.

Summary: This study developed water retentive and thermal resistant cement concrete (WTCC) to enhance pavement cooling effect. Experimental results showed that WTCC exhibited superior performance in compressive strength and cooling effects.

MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Vegetation cover and plant-trait effects on outdoor thermal comfort in a tropical city

Naika Meili et al.

Summary: Increasing urban vegetation, particularly tree and ground cover, has a significant impact on improving outdoor thermal comfort in tropical cities. Trees are more effective in reducing thermal comfort index during the day, while ground vegetation provides more cooling at night. Increasing vegetation cover fractions can lower the average thermal comfort index, but higher humidity due to plant transpiration can hinder further reduction.

BUILDING AND ENVIRONMENT (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Effect of Precast Concrete Pavement Albedo on the Climate Change Mitigation in Spain

Miguel Angel Sanjuan et al.

Summary: The widespread use of solar-reflective concrete pavements can help mitigate climate change and urban heat islands by reducing carbon dioxide emissions. By replacing asphalt pavements with concrete ones, the albedo of the Spanish freeway network can be improved to enhance local climate change mitigation.

SUSTAINABILITY (2021)

Add to Collection

Review Chemistry, Physical

Thermal Energy Storage by the Encapsulation of Phase Change Materials in Building Elements-A Review

Jose Luis Reyez-Araiza et al.

Summary: The study shows that using phase change materials (PCMs) in buildings for additional heating can increase heat storage capacity by absorbing latent heat, providing an effective way to reduce energy consumption. The encapsulation methods at macro and micro levels are the most viable way to apply PCMs in construction elements, but more research is needed to process bio-based PCMs for increased environmental friendliness.

MATERIALS (2021)

Add to Collection

Review Environmental Sciences

Current State of Indoor Air Phytoremediation Using Potted Plants and Green Walls

Samaneh Bandehali et al.

Summary: Urban civilization has a significant impact on the environment and human health, with indoor air pollution levels being much higher than outdoor pollution. Phytoremediation, a cost-effective and environmentally friendly method, plays a crucial role in purifying indoor air. Indoor plants not only help in air purification but also contribute to regulating building temperature, reducing noise levels, and alleviating social stress.

ATMOSPHERE (2021)

Add to Collection

Article Construction & Building Technology

Incorporation of phase change materials into building envelope for thermal comfort and energy saving: A comprehensive analysis

Qudama Al-Yasiri et al.

Summary: Recent studies have focused on improvement solutions for building envelopes, particularly new techniques such as phase change materials (PCMs). This work emphasizes the importance and application of PCMs in building envelopes, discussing their thermal behavior through various methods and assessing their potential for reducing cooling/heating loads, energy savings, and enhancing thermal comfort.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Shape- and Color-Switchable Polyurethane Thermochromic Actuators Based on Metal-Containing Ionic Liquids

Zhenyong Wang et al.

Summary: Bioinspired synergistic shape-color-switchable actuators based on thermally induced shape-memory polyurethane and thermochromic ionic liquids were prepared in this study. These actuators can quickly change color and shape in a narrow temperature range, showing potential applications in artificial muscle actuators and intelligent camouflages.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Bioinspired Color-Changing Photonic Polymer Coatings Based on Three-Dimensional Blue Phase Liquid Crystal Networks

Yanzhao Yang et al.

Summary: This study presents the fabrication of humidity-driven color-changing photonic polymer coatings based on hydrogen-bonded three-dimensional blue phase liquid crystal networks, demonstrating their versatility in applications such as optical sensors, information encryption, adaptive camouflage, and humidity sensors. The research provides new insights into the development of stimuli-responsive advanced functional materials with customizable 3D photonic nanostructures for a wide range of technological applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Construction & Building Technology

The impact of street canyon morphology and traffic volume on NO2 values in the street canyons of Antwerp

D. Voordeckers et al.

Summary: Research shows significant correlations between air quality in street canyons and morphological indices, traffic volume, with aspect ratio and maximum hourly traffic volume affecting NO2 concentrations. For street canyons with specific aspect ratios, a traffic volume of 300 vehicles per hour was identified as the threshold to guarantee acceptable air quality.

BUILDING AND ENVIRONMENT (2021)

Add to Collection

Article Construction & Building Technology

Evaluation of pore size distribution and permeability reduction behavior in pervious concrete

Jiandong Huang et al.

Summary: This study investigated the pore size distributions and permeability reduction behavior of pervious concrete through laboratory tests. The results showed that while thickness has a negligible effect on permeability, it has a significant impact on clogging behavior.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Review Construction & Building Technology

Emerging technologies in cool pavements: A review

B. R. Anupam et al.

Summary: The article discusses the impact of infrastructure development on the environment and ecosystem, with a focus on the urban heat island effect. Research shows that pavement temperature has a significant influence on urban temperature, leading to the introduction of various cool pavement technologies to mitigate the heat island effect. Emerging cool pavement technologies such as reflective pavements and evaporative pavements are being developed, but face various limitations.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Emerging radiative materials and prospective applications of radiative sky cooling - A review

Abdul Samad Farooq et al.

Summary: This research introduces the working principle of radiative sky coolers and their importance in various applications, with a focus on the impact of advancements in nanotechnology and metamaterials on their performance improvement. Additionally, a detailed study on the structural characteristics of radiative sky coolers, the latest advancements in radiative materials, and emerging applications is conducted.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Cool pavements for urban heat island mitigation: A synthetic review

Chenghao Wang et al.

Summary: The urban heat island effect presents challenges to urban environmental quality, building energy consumption, and public health. Research, policy-making, and industry efforts are being made to develop UHI mitigation strategies, but lack of synergies between different stakeholders may hinder effectiveness. Cool pavement technologies have potential to mitigate UHI, but gaps exist in research and implementation, requiring further collaboration and action for sustainable urban energy use.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Add to Collection

Article Energy & Fuels

Structure effect of the envelope coupled with heat reflective coating and phase change material in lowering indoor temperature

Ziye Ling et al.

Summary: This study finds that the HRC coated on the exterior surface of the wall can block radiation heat more efficiently, while the insulation layer between HRC and PCM is essential to improve thermal regulation performance.Comparing 15 combinations of HRCs and PCMs, the study provides insight into the optimal combination of PCM and HRC in the building envelope for passive cooling.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Construction & Building Technology

Educational building retrofit under climate change and urban heat island effect

Gizem Akkose et al.

Summary: This study investigates the impact of CC&UHI on educational building performance and demonstrates the effectiveness of passive retrofit scenarios targeting CC&UHI mitigation and adaptation.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Urban Vertical Farming as an Example of Nature-Based Solutions Supporting a Healthy Society Living in the Urban Environment

Anna Zareba et al.

Summary: Vertical urban farms serve as important nature-based solutions and ecosystem service providers in cities, offering an alternative to traditional agriculture and creating new ecological, social, and economic centers. By introducing various functions supporting ecosystem and social services, these urban vertical farms not only bring diverse benefits to urban residents, but also stabilize specific city biomes.

RESOURCES-BASEL (2021)

Add to Collection

Article Automation & Control Systems

Pitch-Black Nanostructured Copper Oxide as an Alternative to Carbon Black for Autonomous Environments

Songtao Wu et al.

Summary: LiDAR systems are crucial for measuring distance and creating point clouds, but may lose data when dealing with typical dark objects. A study introduces nanocrystalline CuO, which exhibits perfect blackness in visible light and better detectability by LiDAR.

ADVANCED INTELLIGENT SYSTEMS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A dual responsive photonic liquid for independent modulation of color brightness and hue

Yun Liu et al.

Summary: This research achieves separate, continuous, and reversible modulation of structural color brightness and hue using dual-responsive photonic nanochains. Color brightness is controlled by a magnetic field, while color hue is controlled by temperature, advancing the development of responsive chromic materials.

MATERIALS HORIZONS (2021)

Add to Collection

Article Construction & Building Technology

Risk Reduction Framework for Blue-Green Roofs

Erlend Andenaes et al.

Summary: Blue-green roofs have emerged as a solution for stormwater management in the Nordic region due to climate change, but the addition of these layers on conventional roofs poses technical challenges and quality risks that must be effectively managed. This paper identifies nine key challenges and provides recommendations within a framework to address them, aiming to reduce the building technical risks associated with blue-green roofs.

BUILDINGS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Understanding soilless engineered soil as a sustainable growing material for food production in a green roof

Kshitij Shukla et al.

Summary: Urbanization has led to a decrease in greenery, but green roofs can help increase green content and allow for the production of fresh organic food in cities. By using engineered soil and selecting the right chemical constituents, plants can be grown effectively on green roofs.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Review Construction & Building Technology

Combating Urban Heat Island Effect-A Review of Reflective Pavements and Tree Shading Strategies

V. R. Sankar Cheela et al.

Summary: Pavements in urban areas cover a significant amount of land, absorbing solar energy and increasing surface temperatures. The lack of green cover exacerbates regional temperature rise, leading to urban heat island effect. Mitigation measures involving reflective pavements and tree canopy can reduce pavement temperature and enhance thermal comfort for city residents.

BUILDINGS (2021)

Add to Collection

Review Construction & Building Technology

Review of methods used to estimate the sky view factor in urban street canyons

Chunping Miao et al.

BUILDING AND ENVIRONMENT (2020)

Add to Collection

Review Construction & Building Technology

Pervious concrete as an alternative pavement strategy: a state-of-the-art review

Barnali Debnath et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Integrating Green-Infrastructures Design in Strategic Spatial Planning with Geodesign

Michele Campagna et al.

SUSTAINABILITY (2020)

Add to Collection

Article Chemistry, Physical

Cement based superhydrophobic coating with excellent robustness and solar reflective ability

Fajun Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Environmental Sciences

Green wall height and design optimisation for effective greywater pollution treatment and reuse

Veljko Prodanovic et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2020)

Add to Collection

Review Construction & Building Technology

Phase change materials for pavement applications: A review

B. R. Anupam et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Performance evaluation of solar-responsive asphalt mixture with thermochromic materials and nano-TiO2 scatterers

Jianying Hu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

Simulating the Long-Term Performance of Multifunctional Green-Pervious Concrete Pavement in Stormwater Runoff-Induced PAHs Remediation

Hong Shang et al.

JOURNAL OF ENVIRONMENTAL ENGINEERING (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Recent development and research priorities on cool and super cool materials to mitigate urban heat island

M. Santamouris et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Engineering, Chemical

Polymer-Encapsulated TiO2 for the Improvement of NIR Reflectance and Total Solar Reflectance of Cool Coatings

Siming Dong et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Add to Collection

Article Environmental Sciences

Improved estimation of leaf chlorophyll content of row crops from canopy reflectance spectra through minimizing canopy structural effects and optimizing off-noon observation time

Dong Li et al.

REMOTE SENSING OF ENVIRONMENT (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Application of phase change material foam composites in the built environment: A critical review

Charles A. Ikutegbe et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Add to Collection

Article Energy & Fuels

Effects of retro-reflective and angular-selective retro-reflective materials on solar energy in urban canyons

Mattia Manni et al.

SOLAR ENERGY (2020)

Add to Collection

Article Environmental Sciences

Advancement in Urban Climate Modelling at Local Scale: Urban Heat Island Mitigation and Building Cooling Demand

Aytac Kubilay et al.

ATMOSPHERE (2020)

Add to Collection

Review Construction & Building Technology

Urban Heat Island Studies with emphasis on urban pavements: A review

Chidozie Maduabuchukwu Nwakaire et al.

SUSTAINABLE CITIES AND SOCIETY (2020)

Add to Collection

Article Environmental Sciences

Electricity savings and greenhouse gas emission reductions from global phase-down of hydrofluorocarbons

Pallav Purohit et al.

ATMOSPHERIC CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Environmental Sciences

Urban heat island impact on state residential energy cost and CO2 emissions in the United States

J. Roxon et al.

URBAN CLIMATE (2020)

Add to Collection

Article Construction & Building Technology

Impacts of the water absorption capability on the evaporative cooling effect of pervious paving materials

Junsong Wang et al.

BUILDING AND ENVIRONMENT (2019)

Add to Collection

Review Chemistry, Applied

Characteristics of pigments, modification, and their functionalities

Bismark Sarkodie et al.

COLOR RESEARCH AND APPLICATION (2019)

Add to Collection

Article Construction & Building Technology

Field and laboratory measurement of albedo and heat transfer for pavement materials

Jun Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Review Green & Sustainable Science & Technology

Permeable concrete pavements: A review of environmental benefits and durability

Ning Xie et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Multidisciplinary Sciences

Scale-dependent interactions between tree canopy cover and impervious surfaces reduce daytime urban heat during summer

Carly D. Ziter et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)

Add to Collection

Article Energy & Fuels

Using advanced thermochromic technologies in the built environment: Recent development and potential to decrease the energy consumption and fight urban overheating

Samira Garshasbi et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Eco-Friendly Colloidal Quantum Dot-Based Luminescent Solar Concentrators

Yimin You et al.

ADVANCED SCIENCE (2019)

Add to Collection

Review Green & Sustainable Science & Technology

Green Roof Design: State of the Art on Technology and Materials

Stefano Cascone

SUSTAINABILITY (2019)

Add to Collection

Article Biodiversity Conservation

Comparing the transpirational and shading effects of two contrasting urban tree species

Mohammad A. Rahman et al.

URBAN ECOSYSTEMS (2019)

Add to Collection

Article Thermodynamics

Pavement temperature prediction: Theoretical models and critical affecting factors

Jiaqi Chen et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Adaptive thermochromic roof system: Assessment of performance under different climates

Jianying Hu et al.

ENERGY AND BUILDINGS (2019)

Add to Collection

Article Chemistry, Physical

Sustainable Green Pavement Using Bio-Based Polyurethane Binder in Tunnel

Chao Leng et al.

MATERIALS (2019)

Add to Collection

Review Construction & Building Technology

Integrating phase change materials in construction materials: Critical review

Afshin Marani et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Environmental Sciences

Influence of rainfall intensity and pollution build-up levels on water quality and quantity response of permeable pavements

Carmen Hernandez-Crespo et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Add to Collection

Review Construction & Building Technology

Living walls in indoor environments

Kanchane Gunawardena et al.

BUILDING AND ENVIRONMENT (2019)

Add to Collection

Article Multidisciplinary Sciences

Modification of asphalt mixtures for cold regions using microencapsulated phase change materials

Moises Bueno et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Reflective Nanostructured Titania Shell: A Sustainable Pigment for Cool Coatings

Richa Sharma et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Bioinspired Stimuli-Responsive Color-Changing Systems

Golnaz Isapour et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Self-cleaning building materials: The multifaceted effects of titanium dioxide

Riccardo Paolini et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Performance analysis of incorporating phase change materials in asphalt concrete pavements

Bhagya Athukorallage et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Thermodynamics

Design and fabrication of reversible thermochromic microencapsulated phase change materials for thermal energy storage and its antibacterial activity

Xiaoye Geng et al.

ENERGY (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Green roofs and facades: A comprehensive review

Ahmet B. Besir et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Green Roofs and Green Walls for Biodiversity Conservation: A Contribution to Urban Connectivity?

Flavie Mayrand et al.

SUSTAINABILITY (2018)

Add to Collection

Review Environmental Sciences

The basic roles of indoor plants in human health and comfort

Linjing Deng et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Climate Change and Transport Infrastructures: State of the Art

Laura Moretti et al.

SUSTAINABILITY (2018)

Add to Collection

Article Construction & Building Technology

Optic-energy performance improvement of exterior paints for buildings

Elena Morini et al.

ENERGY AND BUILDINGS (2017)

Add to Collection

Article Construction & Building Technology

Development and characterization of retro-reflective colored tiles for advanced building skins

Beatrice Castellani et al.

ENERGY AND BUILDINGS (2017)

Add to Collection

Article Construction & Building Technology

Natural aging of cool walls: Impact on solar reflectance, sensitivity to thermal shocks and building energy needs

Riccardo Paolini et al.

ENERGY AND BUILDINGS (2017)

Add to Collection

Article Environmental Sciences

Impact of heatwave on a megacity: an observational analysis of New York City during July 2016

Prathap Ramamurthy et al.

ENVIRONMENTAL RESEARCH LETTERS (2017)

Add to Collection

Article Chemistry, Physical

The influence of Mn/N-codoping on the thermal performance of ZnAl2O4 as high near-infrared reflective inorganic pigment

Rui Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Review Energy & Fuels

State of the art on the development of cool coatings for buildings and cities

Anna Laura Pisello

SOLAR ENERGY (2017)

Add to Collection

Article Materials Science, Coatings & Films

Coloring the aluminum alloy surface in plasma electrolytic oxidation with the green pigment colloid

Jian-Mao Wang et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Add to Collection

Article Environmental Sciences

Diversification of Land Surface Temperature Change under Urban Landscape Renewal: A Case Study in the Main City of Shenzhen, China

Yanxu Liu et al.

REMOTE SENSING (2017)

Add to Collection

Article Acoustics

Acoustic insulation capacity of Vertical Greenery Systems for buildings

Gabriel Perez et al.

APPLIED ACOUSTICS (2016)

Add to Collection

Article Thermodynamics

Cool materials for reducing summer energy consumptions in Mediterranean climate: In-lab experiments and numerical analysis of a new coating based on acrylic paint

Alessandro Antonaia et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Article Construction & Building Technology

Experimental study on materials composition design and mixture performance of water-retentive asphalt concrete

Wei Jiang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Review Green & Sustainable Science & Technology

Review on the impact of urban geometry and pedestrian level greening on outdoor thermal comfort

Elmira Jamei et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Review Green & Sustainable Science & Technology

Green roofs: A critical review on the role of components, benefits, limitations and trends

K. Vijayaraghavan

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Review Green & Sustainable Science & Technology

Introduction of Microbial Biopolymers in Soil Treatment for Future Environmentally-Friendly and Sustainable Geotechnical Engineering

Ilhan Chang et al.

SUSTAINABILITY (2016)

Add to Collection

Proceedings Paper Energy & Fuels

Performance of Building Roofs on Energy Efficiency-A Review

Arna Ganguly et al.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESEARCH (ICAER) 2015 (2016)

Add to Collection

Review Green & Sustainable Science & Technology

A review on the development of cool pavements to mitigate urban heat island effect

Yinghong Qin

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Add to Collection

Review Polymer Science

Polymers and Dyes: Developments and Applications

Carolin Fleischmann et al.

POLYMERS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

The Albedo of Pervious Cement Concrete Linearly Decreases with Porosity

Rui Zhang et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2015)

Add to Collection

Article Environmental Sciences

On the representation of urban heterogeneities in mesoscale models

Alberto Martilli et al.

ENVIRONMENTAL FLUID MECHANICS (2015)

Add to Collection

Review Green & Sustainable Science & Technology

Fighting global warming by climate engineering: Is the Earth radiation management and the solar radiation management any option for fighting climate change?

Tingzhen Ming et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Add to Collection

Review Green & Sustainable Science & Technology

A review on the basics of building energy estimation

Nelson Fumo

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Add to Collection

Review Materials Science, Coatings & Films

Functional and smart coatings for corrosion protection: A review of recent advances

M. F. Montemor

SURFACE & COATINGS TECHNOLOGY (2014)

Add to Collection

Article Meteorology & Atmospheric Sciences

The role of urban boundary layer investigated with high-resolution models and ground-based observations in Rome area: a step towards understanding parameterization potentialities

E. Pichelli et al.

ATMOSPHERIC MEASUREMENT TECHNIQUES (2014)

Add to Collection

Article Environmental Sciences

Atmospheric boundary layer top height in South Africa: measurements with lidar and radiosonde compared to three atmospheric models

K. Korhonen et al.

ATMOSPHERIC CHEMISTRY AND PHYSICS (2014)

Add to Collection

Article Materials Science, Biomaterials

The surface charge of anti-bacterial coatings alters motility and biofilm architecture

Olena Rzhepishevska et al.

BIOMATERIALS SCIENCE (2013)

Add to Collection

Article Environmental Sciences

Valuation of Green Walls and Green Roofs as Soundscape Measures: Including Monetised Amenity Values Together with Noise-attenuation Values in a Cost-benefit Analysis of a Green Wall Affecting Courtyards

Knut Veisten et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2012)

Add to Collection

Article Energy & Fuels

Using advanced cool materials in the urban built environment to mitigate heat islands and improve thermal comfort conditions

M. Santamouris et al.

SOLAR ENERGY (2011)

Add to Collection

Article Construction & Building Technology

Estimating thermal performance of cool colored paints

Kai L. Uemoto et al.

ENERGY AND BUILDINGS (2010)

Add to Collection

Article Environmental Studies

Policy and planning for large-infrastructure projects: problems, causes, cures

Bent Flyvbjerg

ENVIRONMENT AND PLANNING B-PLANNING & DESIGN (2007)

Add to Collection

Article Energy & Fuels

Solar spectral optical properties of pigments - Part II: survey of common colorants

R Levinson et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2005)

Add to Collection

Article Agronomy

Solar radiation transmission through conifer canopies

JP Hardy et al.

AGRICULTURAL AND FOREST METEOROLOGY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.