Related references
Note: Only part of the references are listed.Inclusion evolution in solid steel during rolling deformation: a review
Yongkun Yang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Carbonyl sulfur removal from blast furnace gas: Recent progress, application status and future development
Yifan Wang et al.
CHEMOSPHERE (2022)
Recovery of zinc and iron from hot-dip galvanizing spent pickle liquor using solvent extraction
Shuxuan Hu et al.
JOURNAL OF MOLECULAR LIQUIDS (2022)
Recycling of blast-furnace sludge by thermochemical treatment with spent iron(II) chloride solution from steel pickling
Christopher Hamann et al.
JOURNAL OF HAZARDOUS MATERIALS (2021)
Recovery of iron from iron-rich pickling sludge for preparing P-doped polyferric chloride coagulant
Bo Yang et al.
CHEMOSPHERE (2021)
Treatment of cold rolling mill (CRM) effluent of steel industry
Pranjal P. Das et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2021)
Industrial Symbiosis: A Sectoral Analysis on Enablers and Barriers
Juan Henriques et al.
SUSTAINABILITY (2021)
Surface integrity in metal machining-Part II: Functional performance
Andrea La Monaca et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)
Pyrometallurgical recovery of zinc and valuable metals from electric arc furnace dust - A review
Jie Wang et al.
JOURNAL OF CLEANER PRODUCTION (2021)
A new dust removal technology used in hot rolling mills: Atomized spray with higher dedusting efficiency
Wen Xiong et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Acid recovering and iron recycling from pickling waste acid by extraction and spray pyrolysis techniques
Ya Gao et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Residue Valorization in the Iron and Steel Industries: Sustainable Solutions for a Cleaner and More Competitive Future Europe
Johannes Rieger et al.
METALS (2021)
Industrial symbiosis profiles in energy-intensive industries: Sectoral insights from open databases
Francisco Mendez-Alva et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Utilization of LD slag from steel industry for the preparation of MF membrane
Deepti et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2020)
Recycling of groundwater treatment sludge to prepare nano-rod erdite particles for tetracycline adsorption
Zhan Qu et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Kinetics of CO methanation using a Fe-bearing catalyst from a blast furnace sludge
Paulina Melo Bravo et al.
FUEL (2020)
Technical Viability Analysis of Industrial Synergies-An Applied Framework Perspective
Rui Dias et al.
SUSTAINABILITY (2020)
Effective purification of cold-rolling sludge as iron concentrate powder via a coupled hydrothermal and calcination route: From laboratory-scale to pilot-scale
Suiyi Zhu et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Controlling the Composition and Magnetic Properties of Nano-SrFe12O19 Powder Synthesized from Oily Cold Mill Sludge by the Citrate Precursor Method
Bo Liu et al.
MATERIALS (2019)
Kinetics of hematite to magnetite transformation by gaseous reduction at low concentration of carbon monoxide
V. P. Ponomar et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)
Treatment of paper mill wastewater using a composite inorganic coagulant prepared from steel mill waste pickling liquor
Shuo Yang et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2019)
Red mud as a substitute coloring agent for the hematite pigment
J. Carneiro et al.
CERAMICS INTERNATIONAL (2018)
A review of technology and policy deep decarbonization pathway options for making energy-intensive industry production consistent with the Paris Agreement
Chris Bataille et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Regeneration of waste lubricant oil with distinct properties by extraction-flocculation using green solvents
Carolina T. Pinheiro et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Treatment of blast furnace sludge (BFS) using a microwave heating technique
M. Omran et al.
IRONMAKING & STEELMAKING (2017)
Characterization and Upgrading of a Low Zinc-Containing and Fine Blast Furnace Sludge - A Multi-Objective Analysis
Anton Andersson et al.
ISIJ INTERNATIONAL (2017)
The Circular Economy A new sustainability paradigm?
Martin Geissdoerfer et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Impact of urbanization on energy related CO2 emission at different development levels: Regional difference in China based on panel estimation
Zhengxia He et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Efficacy of Landfill Tax and Subsidy Policies for the Emergence of Industrial Symbiosis Networks: An Agent-Based Simulation Study
Luca Fraccascia et al.
SUSTAINABILITY (2017)
Cementing efficiency of electric arc furnace dust in mortars
Margareth da Silva Magalhaes et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Recovery of zinc from industrial waste pickling liquor
Abhishek Pathak et al.
HYDROMETALLURGY (2016)
Recycling of blast furnace sludge by briquetting with starch binder: Waste gas from thermal treatment utilizable as a fuel
Klara Drobikova et al.
WASTE MANAGEMENT (2016)
Recovery of combustibles from electrostatic precipitator discharge
Pankaj Kumar Jain et al.
WASTE MANAGEMENT & RESEARCH (2016)
Synthesis and characterization of micaceous iron oxide pigment from oily cold rolling mill sludge
Bo Liu et al.
SELECTED PROCEEDINGS OF THE TENTH INTERNATIONAL CONFERENCE ON WASTE MANAGEMENT AND TECHNOLOGY (2016)
Behavior of zinc, iron and calcium from electric arc furnace (EAF) dust in hydrometallurgical processing in sulfuric acid solutions: Thermodynamic and kinetic aspects
F. Kukurugya et al.
HYDROMETALLURGY (2015)
Elemental Impurities in Pharmaceutical Excipients
Gang Li et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
Reduction disintegration mechanism of cold briquettes from blast furnace dust and sludge
Leandro Rocha Lemos et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2015)
Martensite reversion and texture formation in 17Mn-0.06C TRIP/TWIP steel after hot cold rolling and annealing
Diana Perez Escobar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2015)
A study on treatment methods of spent pickling liquor generated by pickling process of steel
Anuradha Devi et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2014)
Investigation of carboxylic acids and non-aqueous solvents for the selective leaching of zinc from blast furnace dust slurry
Julian M. Steer et al.
HYDROMETALLURGY (2013)
Recycle of valuable products from oily cold rolling mill sludge
Bo Liu et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2013)
Structural ceramics containing electric arc furnace dust
V. N. Stathopoulos et al.
JOURNAL OF HAZARDOUS MATERIALS (2013)
Classification of hematite types in iron ores through circularly polarized light microscopy and image analysis
Otavio da Fonseca Martins Gomes et al.
MINERALS ENGINEERING (2013)
Strontium ferrite powders prepared from oily cold rolling mill sludge by solid-state reaction method
Bo Liu et al.
RARE METALS (2013)
Effect of electric arc furnace dust (EAFD) on properties of asphalt cement mixture
Mohammad A. T. Alsheyab et al.
RESOURCES CONSERVATION AND RECYCLING (2013)
A new catalytic opportunity for waste materials: Application of waste slag based catalyst in CO2 fixation reaction
Yasutaka Kuwahara et al.
JOURNAL OF CO2 UTILIZATION (2013)
Recycling of electric arc furnace dust into red ceramic
Carlos Maurício Fontes Vieira et al.
Journal of Materials Research and Technology-JMR&T (2013)
Relationship between sinter properties and iron ore granulation index
A. Cores et al.
IRONMAKING & STEELMAKING (2012)
The Challenges of Reusing Mining and Mineral-Processing Wastes
Zhengfu Bian et al.
SCIENCE (2012)
Waste materials - catalytic opportunities: an overview of the application of large scale waste materials as resources for catalytic applications
M. Balakrishnan et al.
GREEN CHEMISTRY (2011)
Quantifying 'geographic proximity': Experiences from the United Kingdom's National Industrial Symbiosis Programme
Paul D. Jensen et al.
RESOURCES CONSERVATION AND RECYCLING (2011)
Acid bioleaching of solid waste materials from copper, steel and recycling industries
Elina A. Vestola et al.
HYDROMETALLURGY (2010)
Hydrometallurgical extraction of zinc from Jordanian electric arc furnace dust
Reyad A. Shawabkeh
HYDROMETALLURGY (2010)
Hydrometallurgical process for zinc recovery from electric arc furnace dust (EAFD) Part I: Characterization and leaching by diluted sulphuric acid
P. Oustadakis et al.
JOURNAL OF HAZARDOUS MATERIALS (2010)
Hydrometallurgical process for zinc recovery from electric arc furnace dust (EAFD). Part II: Downstream processing and zinc recovery by electrowinning
P. E. Tsakiridis et al.
JOURNAL OF HAZARDOUS MATERIALS (2010)
Waste and Biomass Valorization
Ange Nzihou
WASTE AND BIOMASS VALORIZATION (2010)
Bioleaching of Zinc and Iron from Steel Plant Waste using Acidithiobacillus Ferrooxidans
Oktay Bayat et al.
APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY (2009)
DIRECT IRON SMELTING REDUCTION PROCESSES
B. Anameric et al.
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2009)
Synthesis of black ceramic pigments from secondary raw materials
G. Costa et al.
DYES AND PIGMENTS (2008)
Bioleaching of metals from spent lithium ion secondary batteries using Acidithiobacillus ferrooxidans
Debaraj Mishra et al.
WASTE MANAGEMENT (2008)
Atmospheric leaching of steel-making wastes and the recipitation of goethite from the ferric sulphate solution
Sarka Langova et al.
HYDROMETALLURGY (2007)
Glass-ceramic materials from electric arc furnace dust
P. Kavouras et al.
JOURNAL OF HAZARDOUS MATERIALS (2007)
Zinc accumulation during recycling of iron oxide wastes in the blast furnace
D. E. Esezobor et al.
IRONMAKING & STEELMAKING (2006)
Chemical, physical, structural and morphological characterization of the electric arc furnace dust
Janaina G. M. S. Machado et al.
JOURNAL OF HAZARDOUS MATERIALS (2006)
Hydrometallurgical processing of carbon steel EAF dust
Tomas Havlik et al.
JOURNAL OF HAZARDOUS MATERIALS (2006)
Dust formation in Electric Arc Furnace:: Birth of the particles
AG Guézennec et al.
POWDER TECHNOLOGY (2005)
The effect of roll roughness and lubricant viscosity on the loads on the mill during cold rolling of steel strips
K Dick et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Zinc stearate production by precipitation and fusion processes
M Gönen et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)
Recycling ferrous and nonferrous waste streams with FASTMET
JM McClelland et al.
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2003)
Vitrification of electric arc furnace dusts
M Pelino et al.
WASTE MANAGEMENT (2002)
Zinc and lead removal from blast furnace sludge with a hydrometallurgical process
P Van Herck et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2000)
Share Paper
