☆ 4.6 Article

Optimization of Machining Parameters to Minimize Cutting Forces and Surface Roughness in Micro-Milling of Mg13Sn Alloy

MICROMACHINES (2023)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

Effects of magnesium alloy corrosion on biological response-Perspectives of metal-cell interaction

Jua Kim et al.

Summary: Mg alloys are widely used in orthopedic and cardiovascular applications due to their biodegradable nature and ability to induce angiogenesis and osteogenesis. However, the inconsistency between in vitro and in vivo corrosion results poses challenges in biomaterial design. Therefore, understanding the bio-interactions between metals and cells is crucial for studying the biological performance of Mg.

PROGRESS IN MATERIALS SCIENCE (2023)

Add to Collection

Article Chemistry, Analytical

Comparative Analysis of Minimum Chip Thickness, Surface Quality and Burr Formation in Micro-Milling of Wrought and Selective Laser Melted Ti64

Ucan Karakilinc et al.

Summary: Selective laser melting (SLM) is a 3D printing process that can produce complex geometries as an alternative to traditional processes. Micro milling plays a significant role in producing miniature geometries. This study compares the micro machinability of SLM parts with wrought Ti64.

MICROMACHINES (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural and Mechanical Behavior Investigations of Nb-Reinforced Mg-Sn-Al-Zn-Mn Matrix Magnesium Composites

Ali Ercetin et al.

Summary: This research focuses on the fabrication and characterization of TAZ532-xNb composites. The composites were successfully formed by hot pressing using high-purity powders of Mg, Sn, Al, Zn, Mn, and Nb. XRD analysis confirmed the presence of desired phases in the composites. The composites exhibited high relative density, densely packed microstructure, and exceptional wetting characteristics. The mechanical properties, such as hardness and tensile strength, improved with increasing Nb reinforcement ratio.

METALS (2023)

Add to Collection

Review Engineering, Biomedical

Magnesium-Based Temporary Implants: Potential, Current Status, Applications, and Challenges

Sankaranarayanan Seetharaman et al.

Summary: Biomedical implants are important for repairing or replacing damaged or diseased tissues or organs. The success of implantation depends on factors such as mechanical properties, biocompatibility, and biodegradability of the materials used. Magnesium-based materials have emerged as a promising class of temporary implants due to their remarkable properties. This review article provides a comprehensive overview of the properties, research works, and potential applications of Mg-based implants.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2023)

Add to Collection

Article Chemistry, Analytical

Effect of Drilling Parameters and Tool Geometry on the Thrust Force and Surface Roughness of Aerospace Grade Laminate Composites

Cagin Bolat et al.

Summary: This study aims to investigate the drilling characterization of Carbon Fiber-Reinforced Plastics (CFRPs) with different drilling parameters and cutting tools. The results show that the optimal drilling conditions are a cutting speed of 45 m/min and feed rate of 0.05 mm/rev using a type II drill with a 120° point angle and 5 mm diameter, as well as a cutting speed of 30 m/min and feed rate of 0.05 mm/rev using a type II drill with a 120° point angle and 3 mm diameter.

MICROMACHINES (2023)

Add to Collection

Article Chemistry, Analytical

A Review on Manufacturing and Post-Processing Technology of Vascular Stents

Wei Jiang et al.

Summary: This paper introduces the impact of manufacturing and post-processing technology on the performance of vascular stents and prospects the future development.

MICROMACHINES (2022)

Add to Collection

Review Chemistry, Physical

Corrosion Behavior in Magnesium-Based Alloys for Biomedical Applications

Liming Xu et al.

Summary: Magnesium alloys possess excellent biocompatibility and biodegradability, but their corrosion resistance is relatively lower. This study reviews the corrosion mechanism of magnesium alloys and proposes reasonable methods for preventing and modeling corrosion. Additionally, composition design, structural treatment, and surface processing techniques can be used to control degradation rate and improve the biological properties of magnesium alloys.

MATERIALS (2022)

Add to Collection

Article Polymer Science

Adaptive Mechanism for Designing a Personalized Cranial Implant and Its 3D Printing Using PEEK

Syed Hammad Mian et al.

Summary: The rehabilitation of skull bones is a challenging process, and the design and material selection of implants are crucial. This study proposes a hybrid system that incorporates CT acquisition, adaptive design, computational analysis, and accuracy assessment to create personalized cranial implants. The use of PEEK material shows promising results in terms of fitting accuracy and biomechanical analysis.

POLYMERS (2022)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Recent progress in Mg-based alloys as a novel bioabsorbable biomaterials for orthopedic applications

Fei Xing et al.

Summary: Traditional orthopedic metal implants like titanium and cobalt-chromium alloys cannot degrade in vivo, leading to bone loss. In contrast, biodegradable magnesium alloys, with characteristics such as low density and good biocompatibility, are gaining attention in orthopedic fixation.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

Add to Collection

Article Chemistry, Physical

Biodegradation of a Magnesium Alloy Fixation Screw Used in a Guided Bone Regeneration Model in Beagle Dogs

Patrick Rider et al.

Summary: This study compared the performance of magnesium fixation screws and non-resorbable titanium screws in an animal model. The results showed that both types of screws had equal performance in tissue regeneration. An additional advantage of magnesium screws is their resorbable nature, eliminating the need for a second surgical step to remove the screws.

MATERIALS (2022)

Add to Collection

Review Engineering, Manufacturing

Review on cryogenic assisted micro-machining of soft polymer: An emphasis on molecular physics, chamber design, performance analysis and sustainability

Partha Sarathi Mallick et al.

Summary: Soft polymers have wide applications in the biomedical sector, but research on their mechanical micro-machining is limited. This paper reviews the application of cryogenic technology in the machining of soft polymers and discusses the impact of cryogenic machining on polymer performance. The sustainability of cryogenic machining of soft materials is also evaluated.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Review Engineering, Manufacturing

Latest Developments and Insights of Orthopedic Implants in Biomaterials Using Additive Manufacturing Technologies

Asarudheen Abdudeen et al.

Summary: This study examines the most preferable additive manufacturing process and biomaterial used for orthopedic implants, particularly hip implants. The study evaluates the advantages and limitations of the chosen materials and manufacturing methods, as well as the biocompatibility and structural defects associated with using them. The review also assesses the current stage of topology optimization technique and concludes with future perspectives and directions for research.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2022)

Add to Collection

Article Chemistry, Physical

Corrosion Behavior of an Mg2Sn Alloy

Zuzana Gabalcova et al.

Summary: In this study, the corrosion behavior of Mg2Sn alloy in different corrosion media was investigated. The highest corrosion rate was observed in the HCl solution, while the corrosion rate decreased with increasing pH of the electrolyte. Passivation of the alloy was observed in the NaOH solution. The corrosion of the alloy involved simultaneous oxidation of magnesium and tin.

MATERIALS (2022)

Add to Collection

Review Chemistry, Physical

Current Trends in Automotive Lightweighting Strategies and Materials

Frank Czerwinski

Summary: The automotive lightweighting trends are driven by sustainability, cost, and performance, generating a high demand for lightweight materials and design concepts in modern mobility and transportation as part of circular economy solutions. Current strategies focus not only on weight reduction, but also on structural efficiency, economic and environmental impacts, and guidelines for materials selection, substitution rules, and multi-material design paradigm to address global R&D activities and industry transition.

MATERIALS (2021)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Biodegradable Mg alloys for orthopedic implants - A review

Violeta Tsakiris et al.

Summary: In the past decade, there has been significant growth in the market for alloys used for implants, especially in orthopedic implants. Research on biodegradable magnesium-based alloys has made great strides in the medical industry due to the desire to improve quality of life and reduce costs.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Recent developments and challenges accompanying with wire arc additive manufacturing of Mg alloys: A review

Nalla Madhuri et al.

Summary: Magnesium alloys are a new category of decomposable biomaterials with similar stiffness to bone, reducing the harmful effects of stress shielding. However, their high chemical reactivity poses challenges for 3D printing. While wire arc additive manufacturing (WAAM) has shown proficiency in producing medium-to-large scale parts, there are still challenges and areas for future development in balancing corrosion resistance and strength in thick structures.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Engineering, Manufacturing

Precision micro-milling process: state of the art

Lorcan O'Toole et al.

Summary: Micro-milling is a precision manufacturing process that finds applications in various industries for its versatility and efficiency. Despite challenges posed by physical phenomena during micro-milling, through in-depth research and discussions, improvements can be made to enhance the overall process. Additionally, the combination of conventional micro-milling with other technologies shows promising potential in addressing issues related to physical process phenomena.

ADVANCES IN MANUFACTURING (2021)

Add to Collection

Article Chemistry, Physical

Surface Quality Assessment after Milling AZ91D Magnesium Alloy Using PCD Tool

Ireneusz Zagorski et al.

MATERIALS (2020)

Add to Collection

Article Engineering, Manufacturing

Micro-end milling of biomedical Tz54 magnesium alloy produced through powder metallurgy

Ali Ercetin et al.

MACHINING SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Review Chemistry, Physical

Is There a Role for Absorbable Metals in Surgery? A Systematic Review and Meta-Analysis of Mg/Mg Alloy Based Implants

Cortino Sukotjo et al.

MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

The microstructure, degradation behavior and cytotoxicity effect of Mg-Sn-Zn alloys in vitro tests

Ali Ercetin et al.

SN APPLIED SCIENCES (2020)

Add to Collection

Article Materials Science, Biomaterials

Effect of wire electro discharge machining process parameters on surface integrity of Ti49.4Ni50.6 shape memory alloy for orthopedic implant application

A. M. Takale et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Trochoidal Milling and Neural Networks Simulation of Magnesium Alloys

Ireneusz Zagorski et al.

MATERIALS (2019)

Add to Collection

Article Engineering, Biomedical

Long-term in vivo evolution of high-purity Mg screw degradation - Local and systemic effects of Mg degradation products

Yiqiang Yu et al.

ACTA BIOMATERIALIA (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Magnesium-Based Micromotors: Water-Powered Propulsion, Multifunctionality, and Biomedical and Environmental Applications

Chuanrui Chen et al.

SMALL (2018)

Add to Collection

Review Engineering, Biomedical

Design of magnesium alloys with controllable degradation for biomedical implants: From bulk to surface

Xia Li et al.

ACTA BIOMATERIALIA (2016)

Add to Collection

Article Automation & Control Systems

Micro-machinability of nanoparticle-reinforced Mg-based MMCs: an experimental investigation

Xiangyu Teng et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

Add to Collection

Article Engineering, Mechanical

Influence of rail grinding process parameters on rail surface roughness and surface layer hardness

Eckart Uhlmann et al.

WEAR (2016)

Add to Collection

Article Engineering, Biomedical

In vivo study of magnesium plate and screw degradation and bone fracture healing

Amy Chaya et al.

ACTA BIOMATERIALIA (2015)

Add to Collection

Article Materials Science, Biomaterials

Microstructure, corrosion behavior and cytotoxicity of biodegradable Mg-Sn implant alloys prepared by sub-rapid solidification

Chaoyong Zhao et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Biodegradable metals

Y. F. Zheng et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2014)

Add to Collection

Review Chemistry, Physical

Calcium Orthophosphate-Based Bioceramics

Sergey V. Dorozhkin

MATERIALS (2013)

Add to Collection

Review Engineering, Biomedical

Biomedical coatings on magnesium alloys - A review

H. Hornberger et al.

ACTA BIOMATERIALIA (2012)

Add to Collection

Review Biochemistry & Molecular Biology

Biodegradable Metals for Cardiovascular Stent Application: Interests and New Opportunities

Maryam Moravej et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2011)

Add to Collection

Article Engineering, Mechanical

Tool life and wear mechanism when machining Hastelloy C-22HS

K. Kadirgama et al.

WEAR (2011)

Add to Collection

Article Engineering, Manufacturing

Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti-6Al-4V

Mohammad Sima et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)

Add to Collection

Article Engineering, Industrial

Tool wear monitoring of micro-milling operations

Mohammad Malekian et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of tool geometry and cutting speed on main cutting force and tool tip temperature

Haci Saglam et al.

MATERIALS & DESIGN (2007)

Add to Collection

Review Engineering, Manufacturing

Investigation of micro-cutting operations

J Chae et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Diamond coated cutting tools for machining of non-ferrous metals and fibre reinforced polymers

A Kopf et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2006)

Add to Collection

Article Engineering, Manufacturing

Modeling micro-end-milling operations. Part I: analytical cutting force model

WY Bao et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.