☆ 4.6 Article

A Non-Sacrificial 3D Printing Process for Fabricating Integrated Micro/Mesoscale Molds

MICROMACHINES (2023)

Related references

Note: Only part of the references are listed.

Article Biophysics

A self-designed device integrated with a Fermat spiral microfluidic chip for ratiometric and automated point-of-care testing of anthrax biomarker in real samples

Xiaodong Lin et al.

Summary: A lanthanide-based ratiometric fluorescent probe was designed and integrated into a self-designed microfluidic chip for the automated determination of DPA. The platform showed high selectivity and sensitivity, with a detection limit as low as 10.11 nM. The device could achieve rapid detection in only 1 minute and was used for point-of-care testing using a smartphone app, simplifying complex processes and reducing testing times.

BIOSENSORS & BIOELECTRONICS (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Synthesis of a Functionalized Carbon Nanotube Graphene Composite Enabling pH-Responsive Electrochemical Sensing for Biomedical Applications

Weiqi Zhao et al.

Summary: In this study, a high-sensitivity pH sensor was developed using a functionalized single-wall carbon nanotube graphene (FSWCNT/G) composite. The sensor consisted of Cr/Au electrodes and FSWCNT/G sealed in a PDMS microchannel on a glass substrate. The fabricated composite sensor exhibited superior performance compared to a pristine graphene sensor, as confirmed by field-effect transistor (FET), linear sweep voltammetry (LSV), and response time measurements. The composite nanosensor demonstrated a high potentiometric gradient of 98.75 mV/pH within the pH range of 4-10 and showed potential for label-free cancer cell detection with a concentration detection range of 5 x 106 to 2.5 x 105 cells/mL.

ACS APPLIED ELECTRONIC MATERIALS (2023)

Add to Collection

Article Chemistry, Analytical

A Monolithic 3D Printed Axisymmetric Co-Flow Single and Compound Emulsion Generator

Amirreza Ghaznavi et al.

Summary: This study reports a microfluidic droplet generator that can produce single and compound droplets using a 3D printing process. The device's performance was successfully verified, and various emulsions were generated. The study also demonstrated the capability of generating bio emulsions using this device.

MICROMACHINES (2022)

Add to Collection

Review Materials Science, Biomaterials

Traction of 3D and 4D Printing in the Healthcare Industry: From Drug Delivery and Analysis to Regenerative Medicine

Karim Osouli-Bostanabad et al.

Summary: This article discusses the potential and challenges of 3D printing and 3D bioprinting in healthcare, highlighting their promise in the fields of regenerative medicine, tissue engineering, and drug delivery. The review emphasizes the customization and complexity of 3D-printed products, as well as the ability of 3D bioprinting to fabricate patient-specific tissues and living cell systems. It also discusses the importance of selecting appropriate printing methods and materials, and the potential of 4D-printed strategies to overcome limitations of conventional 3D printing technologies.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2022)

Add to Collection

Review Chemistry, Analytical

Modular Microfluidics: Current Status and Future Prospects

Xiaochen Lai et al.

Summary: This review mainly focuses on studying the current status, limitations, and future directions of modular microfluidic systems. A modular microfluidic system is composed of interconnected, independent modular microfluidic chips, which are easy to use, highly customizable, and can be deployed on-site.

MICROMACHINES (2022)

Add to Collection

Article Chemistry, Analytical

PDMS Curing Inhibition on 3D-Printed Molds: Why? Also, How to Avoid It?

Bastien Venzac et al.

Summary: A systematic study using 16 commercial resins identified a fast and straightforward treatment for 3D-printed structures to support accurate PDMS replication using UV and/or thermal post-curing. Analysis revealed that phosphine oxide-based photo-initiators were poisoning the Pt-based PDMS catalyst, but were eliminated and recombined into high molecular weight species upon UV and/or thermal treatments.

ANALYTICAL CHEMISTRY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent advances in the design of microfluidic technologies for the manufacture of drug releasing particles

Alejandro Forigua et al.

Summary: This review examines various types of microfluidic devices used to fabricate drug releasing particles from different biomaterials and how on-chip features enable the production of particles with different properties. The article concludes by suggesting future directions for these technologies to be used in industrial settings for the manufacture of drug releasing particles with unique capabilities.

JOURNAL OF CONTROLLED RELEASE (2021)

Add to Collection

Review Chemistry, Analytical

Fabrication Methods for Microfluidic Devices: An Overview

Simon Scott et al.

Summary: Microfluidic devices have the potential to automate a wide variety of chemical and biological operations with higher efficiency and repeatability. Polymer-based devices offer advantages in terms of cost and biocompatibility. Different manufacturing approaches, including direct and replication methods, are described in this study.

MICROMACHINES (2021)

Add to Collection

Review Chemistry, Analytical

Can 3D Printing Bring Droplet Microfluidics to Every Lab?-A Systematic Review

Nafisat Gyimah et al.

Summary: 3D printing technology shows potential in microfluidic chip fabrication and is mature enough for use in research labs. However, challenges still need to be overcome.

MICROMACHINES (2021)

Add to Collection

Review Engineering, Biomedical

3D printed microfluidic devices: a review focused on four fundamental manufacturing approaches and implications on the field of healthcare

Viraj Mehta et al.

Summary: 3D printing technology has emerged as a promising alternative for fabricating microfluidic devices, overcoming limitations associated with conventional methods. Different manufacturing approaches, along with a wide range of additive manufacturing materials and recent research advancements, have helped address challenges in 3D printed microfluidic devices. Possible implications of 3D printed microfluidics in healthcare, such as in vitro disease modeling, organ modeling, drug development, personalized cancer treatment, and cancer drug screening, are discussed, along with future research directions.

BIO-DESIGN AND MANUFACTURING (2021)

Add to Collection

Review Chemistry, Analytical

Recent Progress in 3D Printed Mold-Based Sensors

Shan He et al.

SENSORS (2020)

Add to Collection

Article Chemistry, Analytical

Fabrication of Hard-Soft Microfluidic Devices Using Hybrid 3D Printing

Carlos Ruiz et al.

MICROMACHINES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Acoustic bubble-based bidirectional micropump

Yuan Gao et al.

MICROFLUIDICS AND NANOFLUIDICS (2020)

Add to Collection

Article Chemistry, Analytical

Sealing 3D-printed parts to poly(dimethylsiloxane) for simple fabrication of Microfluidic devices

Cody S. Carrell et al.

ANALYTICA CHIMICA ACTA (2020)

Add to Collection

Article Materials Science, Characterization & Testing

Experimental study on mechanical performance of polydimethylsiloxane (PDMS) at various temperatures

Guiguan Zhang et al.

POLYMER TESTING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Rapid Softlithography Using 3D-Printed Molds

Sajad Razavi Bazaz et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Add to Collection

Article Engineering, Manufacturing

Rapid and Inexpensive Fabrication of Multi-Depth Microfluidic Device using High-Resolution LCD Stereolithographic 3D Printing

Mohamed G. A. Mohamed et al.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2019)

Add to Collection

Article Biochemical Research Methods

Fabrication of truly 3D microfluidic channel using 3D-printed soluble mold

Kyunghun Kang et al.

BIOMICROFLUIDICS (2018)

Add to Collection

Article Biochemical Research Methods

High-precision modular microfluidics by micromilling of interlocking injection-molded blocks

Crystal E. Owens et al.

LAB ON A CHIP (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Microstructures Fabricated by Two-Photon Polymerization and Their Remote Manipulation Techniques: Toward 3D Printing of Micromachines

Yang Lin et al.

ADVANCED OPTICAL MATERIALS (2018)

Add to Collection

Article Chemistry, Analytical

Three-dimensional printed microfluidic modules for design changeable coaxial microfluidic devices

Yuya Morimoto et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Add to Collection

Review Engineering, Multidisciplinary

A Review of Current Methods in Microfluidic Device Fabrication and Future Commercialization Prospects

Bruce K. Gale et al.

INVENTIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of PDMS microfluidic devices with 3D wax jetting

Zong'an Li et al.

RSC ADVANCES (2017)

Add to Collection

Article Materials Science, Biomaterials

Rapid Customization of 3D Integrated Microfluidic Chips via Modular Structure-Based Design

Jingjiang Qiu et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)

Add to Collection

Article Materials Science, Biomaterials

Rapid Customization of 3D Integrated Microfluidic Chips via Modular Structure-Based Design

Jingjiang Qiu et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)

Add to Collection

Review Engineering, Electrical & Electronic

A review on self-assembly in microfluidic devices

Yingying Dou et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2017)

Add to Collection

Review Biochemical Research Methods

3D printed microfluidic devices: enablers and barriers

Sidra Waheed et al.

LAB ON A CHIP (2016)

Add to Collection

Review Biochemical Research Methods

The upcoming 3D-printing revolution in microfluidics

Nirveek Bhattacharjee et al.

LAB ON A CHIP (2016)

Add to Collection

Review Chemistry, Analytical

Polymer Microfluidics: Simple, Low-Cost Fabrication Process Bridging Academic Lab Research to Commercialized Production

Chia-Wen Tsao

MICROMACHINES (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Rapid assembly of multilayer microfluidic structures via 3D-printed transfer molding and bonding

Casey C. Glick et al.

MICROSYSTEMS & NANOENGINEERING (2016)

Add to Collection

Article Biochemical Research Methods

Monolithic multilayer microfluidics via sacrificial molding of 3D-printed isomalt

Matthew K. Gelber et al.

LAB ON A CHIP (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips

Ho Nam Chan et al.

MICROFLUIDICS AND NANOFLUIDICS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

3D printed molds for non-planar PDMS microfluidic channels

Yongha Hwang et al.

SENSORS AND ACTUATORS A-PHYSICAL (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Simple 3D Printed Scaffold-Removal Method for the Fabrication of Intricate Microfluidic Devices

Vittorio Saggiomo et al.

ADVANCED SCIENCE (2015)

Add to Collection

Article Biochemical Research Methods

PDMS lab-on-a-chip fabrication using 3D printed templates

German Comina et al.

LAB ON A CHIP (2014)

Add to Collection

Article Biochemical Research Methods

Microfluidic assembly blocks

Minsoung Rhee et al.

LAB ON A CHIP (2008)

Add to Collection

Article Biochemical Research Methods

SmartBuild - A truly plug-n-play modular microfluidic system

Po Ki Yuen

LAB ON A CHIP (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.