4.6 Article

Revisiting the Definition of Solar Cell Generations

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Bifacial semi-transparent ultra-thin Cu(In,Ga)Se2 solar cells on ITO substrate: How ITO thickness and Na doping influence the performance

Yong Li et al.

Summary: The study optimized ultra-thin CIGSe on In2O3:Sn (ITO) and found that the thickness of ITO and NaF treatment significantly affect the performance of BSTUT CIGSe solar cells. Thicker ITO and higher NaF treatment dose can reduce the Schottky barrier at the ITO/CIGSe interface.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Article Energy & Fuels

Solar cell efficiency tables (Version 60)

Martin A. Green et al.

Summary: This article presents consolidated tables showing the highest independently confirmed efficiencies for solar cells and modules. The guidelines for including results in these tables are outlined, and new entries since January 2022 are reviewed. An appendix describing temporary electrical contacting methods and terminology for large-area solar cells is also included.

PROGRESS IN PHOTOVOLTAICS (2022)

Review Chemistry, Physical

Bifacial perovskite/silicon tandem solar cells

Michele De Bastiani et al.

Summary: Perovskite/silicon tandem solar cells are high-efficiency and low-cost photovoltaic devices that enhance stability and energy yield by collecting light from both the sunward and rear side.

JOULE (2022)

Article Chemistry, Inorganic & Nuclear

Technoeconomic Analysis of Dye Sensitized Solar Cells (DSSCs) with WS2/Carbon Composite as Counter Electrode Material

Tajamul Hussain Syed et al.

Summary: This paper investigates the commercial potential of Dye-Sensitized Solar Cells (DSSCs). The results show that this technology is competitive in terms of manufacturing costs, levelized cost of energy, and system cost, and has the potential to challenge other leading PV technologies.

INORGANICS (2022)

Article Nanoscience & Nanotechnology

Nano-optical designs for high-efficiency monolithic perovskite-silicon tandem solar cells

Philipp Tockhorn et al.

Summary: Gentle sinusoidal nanotextures were designed to achieve high-efficiency perovskite-silicon solar cells, offering advantages such as reduced reflection losses, increased fabrication yield, and improved open-circuit voltage.

NATURE NANOTECHNOLOGY (2022)

Article Energy & Fuels

A 1 cm2 Organic Solar Cell with 15.2% Certified Efficiency: Detailed Characterization and Identification of Optimization Potential

Uli Wuerfel et al.

Summary: This study reports organic solar cells based on a D18:Y6 absorber layer with a certified PCE of 15.24% on an active area of >= 1 cm(2). Optical device simulations and an analytical electrical model quantify the impacts of the transparent electrode's sheet resistance and cell design. Further photoluminescence and electroluminescence spectroscopy reveal electronic coupling between the acceptor and donor/acceptor interface.

SOLAR RRL (2021)

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Article Energy & Fuels

Power rating procedure of hybrid concentrator/flat-plate photovoltaic bifacial modules

Juan F. Martinez et al.

Summary: Hybrid concentrator/flat-plate photovoltaic technology combines III-V multi-junction and flat-plate bifacial solar cells to convert direct, diffuse and rear irradiance into electricity. The power output of the modules is evaluated and rated at standard test and operating conditions, with the results showing high efficiency and output levels.

PROGRESS IN PHOTOVOLTAICS (2021)

Review Energy & Fuels

Bifacial Photovoltaics 2021: Status, Opportunities and Challenges

Radovan Kopecek et al.

Summary: Bifacial photovoltaic modules offer higher energy yield compared to monofacial modules, with costs now comparable. As technology advances, bifacial PV has become the most cost-effective solution for electricity generation.

ENERGIES (2021)

Review Energy & Fuels

Progress and prospects for ultrathin solar cells

Ines Massiot et al.

NATURE ENERGY (2020)

Article Green & Sustainable Science & Technology

Development of photovoltaic technologies for global impact

Wim C. Sinke

RENEWABLE ENERGY (2019)

Article Energy & Fuels

Cd-Free Cu(In,Ga)(Se,S)2 Thin-Film Solar Cell With Record Efficiency of 23.35%

Motoshi Nakamura et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2019)

Article Chemistry, Physical

A Cost Analysis of Fully Solution-Processed ITO-Free Organic Solar Modules

Jie Guo et al.

ADVANCED ENERGY MATERIALS (2019)

Article Energy & Fuels

Efficiency increased to 15.2% for ultra-thin Cu(In,Ga)Se-2 solar cells

Lorelle M. Mansfield et al.

PROGRESS IN PHOTOVOLTAICS (2018)

Article Energy & Fuels

Building a Six-Junction Inverted Metamorphic Concentrator Solar Cell

John F. Geisz et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2018)

Review Engineering, Electrical & Electronic

Review on light management by nanostructures in chalcopyrite solar cells

M. Schmid

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2017)

Article Materials Science, Multidisciplinary

Concentrating light in Cu(In,Ga)Se2 solar cells

Martina Schmid et al.

JOURNAL OF PHOTONICS FOR ENERGY (2017)

Article Physics, Applied

High-efficiency amorphous silicon solar cells: Impact of deposition rate on metastability

Takuya Matsui et al.

APPLIED PHYSICS LETTERS (2015)

Article Chemistry, Multidisciplinary

Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture

Florian Machui et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Energy & Fuels

A 21.5% efficient Cu(In,Ga)Se-2 thin-film concentrator solar cell

JS Ward et al.

PROGRESS IN PHOTOVOLTAICS (2002)

Article Energy & Fuels

Third generation photovoltaics: Ultra-high conversion efficiency at low cost

MA Green

PROGRESS IN PHOTOVOLTAICS (2001)