☆ 4.7 Article

Optimization of Dimensional Accuracy and Surface Roughness of SLA Patterns and SLA-Based IC Components

POLYMERS (2023)

Related references

Note: Only part of the references are listed.

Article Dentistry, Oral Surgery & Medicine

Cost and effectiveness of 3-dimensionally printed model using three different printing layer parameters and two resins

Caio Cesar Dias Resende et al.

Summary: This study aimed to evaluate the accuracy of 3-dimensionally printed casts with different layer thickness and resin types. The results showed that the accuracy was not significantly affected by the layer thickness and resin type, but the printing time doubled as the layer thickness decreased.

JOURNAL OF PROSTHETIC DENTISTRY (2023)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

The Accuracy of Post and Core Fabricated with Digital Technology

Tarin Piangsuk et al.

Summary: This study compared the accuracy of post and cores created with three different fabricating techniques: direct conventional, machine milling, and three-dimensional (3D) printing. The results showed that digitally fabricated post and cores have the same degree of accuracy as those fabricated using the gold standard direct conventional technique. In addition, the 3D printed resin pattern showed superior dimensional stability compared to the milled resin pattern and direct resin pattern.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2023)

Add to Collection

Article Chemistry, Physical

Silver antibacterial surface adjusted by hierarchical structure on 3D printed porous titanium alloy

Yan Jiao et al.

Summary: This study developed a surface strategy using a hierarchical microgroove structure and silver adhered by polydopamine (PDA) on a porous titanium alloy. It was found that the surface parameters of the hierarchical structure controlled the total amount and rate of silver release, and PDA improved the total amount of absorbed silver. In vitro tests showed that the modified surface had better antibacterial properties and allowed cell orientation.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Automation & Control Systems

Surface roughness and dimensional tolerances in A319 alloy samples produced by rapid investment casting process based on fused filament fabrication

Konstantin Fedorov et al.

Summary: Rapid investment casting is a cost-effective and time-saving process for manufacturing complex geometries. However, the surface roughness and dimensional tolerances of castings can be negatively affected by stair-stepping, poor burnout characteristics, and ash residue of 3D printed patterns. This study investigates the effects of burnout temperature and stair-stepping on surface roughness and tolerances by using 3D printed patterns made from different materials. The results show that the surface roughness is evenly distributed for all face angles and burnout temperatures, with an average value of 5 μm. PVB-derived castings retain the original surface texture better than ABS, and ABS patterns exert the highest thermal expansion stress on the ceramic shell.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Proceedings Paper Engineering, Biomedical

Micro-texturing of molds via Stereolithography for the fabrication of medical components

Vito Basile et al.

Summary: The effects of micro-texturing on various surface characteristics have been widely studied. Micro-structured surfaces can improve tribological properties and promote osseointegration in medical devices. This study investigates the manufacturing capability of an SLA technology for micro-textured surfaces and compares different designs.

V CIRP CONFERENCE ON BIOMANUFACTURING (2022)

Add to Collection

Article Engineering, Manufacturing

Study of SLA Printing Parameters Affecting the Dimensional Accuracy of the Pattern and Casting in Rapid Investment Casting

Nazym Badanova et al.

Summary: In Rapid Investment Casting, the dimensional accuracy and geometric characteristics of manufactured parts are crucial for product assembly. This study focuses on the effect of SLA printing parameters, such as layer thickness and build angle, on the accuracy of Castable Wax printed patterns and Al cast parts. The study found that build angle and layer thickness were the most impactful parameters, affecting both the dimensional and geometric accuracy.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2022)

Add to Collection

Article Chemistry, Physical

Impact of Layer Thickness and Storage Time on the Properties of 3D-Printed Dental Dies

Aya Sabbah et al.

Summary: The study found that changing the layer thickness in 3D printing does not affect repeatability or surface roughness, but it does impact the dimensional stability of the dies.

MATERIALS (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Influences of build angle on the accuracy, printing time, and material consumption of additively manufactured surgical templates

David Diaz Rubayo et al.

Summary: This study aimed to evaluate the effects of different build angles on the accuracy, printing time, and material consumption of additively manufactured surgical templates using a desktop SLA 3D printer and photopolymerizing resin material. The results showed that the 0-degree and 45-degree build angles produced the most accurate surgical templates, while the 90-degree build angle produced the least accurate surgical template.

JOURNAL OF PROSTHETIC DENTISTRY (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Evaluation of the marginal fit of metal copings fabricated by using 3 different CAD-CAM techniques: Milling, stereolithography, and 3D wax printer

Amir-Alireza Khaledi et al.

JOURNAL OF PROSTHETIC DENTISTRY (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations

Ji Suk Shim et al.

JOURNAL OF PROSTHETIC DENTISTRY (2020)

Add to Collection

Article Chemistry, Physical

Mechanical Anisotropy and Surface Roughness in Additively Manufactured Parts Fabricated by Stereolithography (SLA) Using Statistical Analysis

Sunil Aravind Shanmugasundaram et al.

MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Effect of Printing Direction on the Accuracy of 3D-Printed Dentures Using Stereolithography Technology

Tamaki Hada et al.

MATERIALS (2020)

Add to Collection

Review Chemistry, Analytical

Application of Stereolithography Based 3D Printing Technology in Investment Casting

Muslim Mukhtarkhanov et al.

MICROMACHINES (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Effect of print orientation and duration of ultraviolet curing on the dimensional accuracy of a 3-dimensionally printed orthodontic clear aligner design

Marian C. McCarty et al.

AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Improving the surface roughness in stereolithography by controlling surface angle, hatch spaces, and postcuring time

Javad Khodaii et al.

ENGINEERING REPORTS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Modeling and optimization of sustainable manufacturing process in machining of 17-4 PH stainless steel

P. Sivaiah et al.

MEASUREMENT (2019)

Add to Collection

Article Thermodynamics

Optimization of process parameters to improve dimensional accuracy of investment casting using Taguchi approach

Sangita N. Bansode et al.

ADVANCES IN MECHANICAL ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

Surface enhancement of FDM patterns to be used in rapid investment casting for making medical implants

Vivek Kumar Tiwary et al.

RAPID PROTOTYPING JOURNAL (2019)

Add to Collection

Article Engineering, Mechanical

An assessment of the dimensional accuracy and geometry-resolution limit of desktop stereolithography using response surface methodology

Ivana Cotabarren et al.

RAPID PROTOTYPING JOURNAL (2019)

Add to Collection

Article Chemistry, Physical

Surface Quality of 3D-Printed Models as a Function of Various Printing Parameters

Christin Arnold et al.

MATERIALS (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Objects build orientation, positioning, and curing influence dimensional accuracy and flexural properties of stereolithographically printed resin

Alexey Unkovskiy et al.

DENTAL MATERIALS (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Ten challenges in 3D printing

William Oropallo et al.

ENGINEERING WITH COMPUTERS (2016)

Add to Collection

Article Engineering, Mechanical

Investigating the surface roughness of implant prepared by combining fused deposition modeling and investment casting

Rupinder Singh et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2016)

Add to Collection

Review Engineering, Mechanical

Rapid casting solutions: a review

Munish Chhabra et al.

RAPID PROTOTYPING JOURNAL (2011)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Design of patient-specific hip implants based on the 3D geometry of the human femur

Yongtae Jun et al.

ADVANCES IN ENGINEERING SOFTWARE (2010)

Add to Collection

Article Engineering, Mechanical

Rapid prototyping - a technology transfer approach for development of rapid tooling

Dilip Sahebrao Ingole et al.

RAPID PROTOTYPING JOURNAL (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Alloy shrinkage factors for the investment casting process

AS Sabau

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2006)

Add to Collection

Article Automation & Control Systems

Rapid and cost-effective manufacturing of high-integrity aerospace components

V Raja et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)

Add to Collection

Article Automation & Control Systems

Rapid investment casting: direct and indirect approaches via model maker II

CK Chua et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2005)

Add to Collection

Article Engineering, Industrial

Statistical analysis on accuracy of wax patterns used in investment casting process

PKDV Yarlagadda et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.