☆ 4.7 Article

Medical-Grade PLA Nanocomposites with Optimized Tungsten Carbide Nanofiller Content in MEX Additive Manufacturing: A Rheological, Morphological, and Thermomechanical Evaluation

POLYMERS (2023)

Related references

Note: Only part of the references are listed.

Article Automation & Control Systems

Hybrid 3D printing of multifunctional polylactic acid/carbon black nanocomposites made with material extrusion and post-processed with CO2 laser cutting

John D. D. Kechagias et al.

Summary: This study investigates the interaction between material design, 3D printing, and laser post-processing to improve the performance of printable nanocomposite materials. PLA/CB nanocomposites were prepared and processed using a low-cost CO2 laser to improve the quality of the samples through optimization and evaluation of laser cutting parameters.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Coarse cemented carbide produced via binder jetting 3D printing

Thomas Wolfe et al.

Summary: This study developed coarse tungsten carbide materials using Binder Jetting 3D Printing technology, which showed uniform grain size and good mechanical properties. The wear resistance of these materials was comparable to conventionally produced cemented carbide.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2023)

Add to Collection

Article Engineering, Biomedical

An explorative study on the antimicrobial effects and mechanical properties of 3D printed PLA and TPU surfaces loaded with Ag and Cu against nosocomial and foodborne pathogens

Sotirios Ekonomou et al.

Summary: Antimicrobial 3D printed surfaces loaded with copper and silver nanoparticles were developed and evaluated for their antimicrobial effect against Escherichia coli, Listeria monocytogenes, Salmonella Typhimurium, and Staphylococcus aureus. The mechanical characteristics, water absorption capacity, and surface wettability of the printed surfaces were also assessed. The results showed that the copper and silver-loaded surfaces exhibited a higher inhibitory effect against S. aureus and L. monocytogenes biofilms, and had a slightly stiffer response than plain PLA. These surfaces showed potential for preventing bacterial colonization in biomedical and food production settings.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Feasibility of nanomaterial tungsten carbide as lead-free nanomaterial-based radiation shielding

Mira Natasha Azman et al.

Summary: Radiation shielding material is crucial for protecting humans and the environment from radiation. Lead, although highly effective, has drawbacks such as toxicity and bulkiness, making the development of alternative materials like tungsten carbide nanofilm important.

RADIATION PHYSICS AND CHEMISTRY (2023)

Add to Collection

Article Engineering, Manufacturing

Multifunctional PLA/CNTs nanocomposites hybrid 3D printing integrating material extrusion and CO2 laser cutting

Markos Petousis et al.

Summary: By controlling the 3D printing parameters and implementing post-processing techniques, the performance of parts fabricated using material extrusion (MEX) 3D printing can be improved, allowing for their application in various fields such as biomedical, aeronautics, automotive, and printing electronics. The use of laser as a post-processing technology significantly enhances the efficiency of PLA/CNT nanocomposites.

JOURNAL OF MANUFACTURING PROCESSES (2023)

Add to Collection

Article Engineering, Manufacturing

A multi-parametric process evaluation of the mechanical response of PLA in FFF 3D printing

J. D. Kechagias et al.

Summary: This study investigates the effects of six control parameters on the mechanical properties of 3D printed PLA parts. The experimental results show that the raster deposition angle, nozzle temperature, printing speed, and infill density have significant impacts on the mechanical response of 3D printed PLA parts.

MATERIALS AND MANUFACTURING PROCESSES (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Binder jetting 3D printed cemented carbide: Mechanical and wear properties of medium and coarse grades

T. A. Wolfe et al.

Summary: Selective laser melting (SLM) is the most widely used additive manufacturing (AM) technology for 3D printing metals. Attempts to produce cemented carbide by SLM have been unsuccessful, but binder jetting 3D printing (BJT) and micro-extrusion-based methods have been successful in printing and sintering cemented carbide. The development of medium and coarse WC-Co powders with good printability and sintering properties has been achieved, and the wear resistance of BJT cemented carbide matches or exceeds conventionally produced cemented carbide.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2023)

Add to Collection

Article Polymer Science

Functionality Versus Sustainability for PLA in MEX 3D Printing: The Impact of Generic Process Control Factors on Flexural Response and Energy Efficiency

Markos Petousis et al.

Summary: This study introduces multi-objective optimization of material deployment, 3D printing flexural response, and energy consumption in MEX AM with Polylactic Acid (PLA). The impact of control parameters on these responses was evaluated using the Robust Design theory, and it was found that infill density, raster deposition angle, and layer thickness have the greatest influence on printing time, material weight, flexural strength, and energy consumption.

POLYMERS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Mechanical Reinforcement of ABS with Optimized Nano Titanium Nitride Content for Material Extrusion 3D Printing

Nectarios Vidakis et al.

Summary: Acrylonitrile Butadiene Styrene (ABS) nanocomposites with Titanium Nitride (TiN) nanoparticles were developed using Material Extrusion (MEX) Additive Manufacturing (AM) and Fused Filament Fabrication (FFF) methods. Mechanical tests and morphological characterization were conducted to investigate the effect of TiN nanoparticles on the mechanical performance and surface characteristics of the nanocomposites. The inclusion of 6 wt. % of TiN nanoparticles significantly improved the mechanical properties of the ABS/TiN composites, including flexural modulus of elasticity and toughness.

NANOMATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Optimizing the Rheological and Thermomechanical Response of Acrylonitrile Butadiene Styrene/Silicon Nitride Nanocomposites in Material Extrusion Additive Manufacturing

Markos Petousis et al.

Summary: The aim of this research was to investigate the thermomechanical properties of new nanocomposites in additive manufacturing (AM). Material extrusion (MEX) 3D printing was used to fabricate ABS nanocomposites with silicon nitride nano-inclusions. Standard tests were conducted to evaluate the influence of Si3N4 nanofiller content on the mechanical and thermal response of the printed samples. The results showed that silicon nitride nanoparticles significantly enhanced the mechanical properties of the polymer matrix.

NANOMATERIALS (2023)

Add to Collection

Article Materials Science, Ceramics

On the substantial mechanical reinforcement of Polylactic Acid with Titanium Nitride ceramic nanofillers in material extrusion 3D printing

Markos Petousis et al.

Summary: Titanium nitride (TiN) nanoparticles were introduced into polylactic acid (PLA) thermoplastic through a thermomechanical process to produce nanocomposites for MEX 3DP 3D printing. The addition of 4 wt% TiN resulted in a significant improvement in the mechanical properties of PLA, with a 43.4% increase in tensile strength and a 51.5% increase in flexural strength. The cost-effectiveness of the process was also evaluated and found to be favorable.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Environmental Sciences

Biochar filler in MEX and VPP additive manufacturing: characterization and reinforcement effects in polylactic acid and standard grade resin matrices

Nectarios Vidakis et al.

Summary: The efficiency of using eco-friendly biochar as reinforcement in additive manufacturing (AM) was investigated. Two different AM technologies were employed, and the composites developed using biochar showed improved mechanical properties. The results indicate the strong potential of biochar-based composites in AM applications.

BIOCHAR (2023)

Add to Collection

Article Engineering, Chemical

Nanocomposites of PLA/ZnO nanofibers for medical applications: Antimicrobial effect, thermal, and mechanical behavior under cyclic stress

Renato C. Nonato et al.

Summary: This study investigated the mechanical performance, antimicrobial effect, and potential application in bone implants of a biodegradable and biocompatible polymer poly(lactic acid) (PLA) and zinc oxide (ZnO) nanofiber composites. The results demonstrated that the PLA/ZnO nanocomposites exhibited improved mechanical properties and antimicrobial activity compared to pure PLA, indicating their potential use in bone implants.

POLYMER ENGINEERING AND SCIENCE (2022)

Add to Collection

Article Polymer Science

Justification of the Use of Composite Metal-Metal-Polymer Parts for Functional Structures

Nickolay S. Lubimyi et al.

Summary: The study introduces a novel method for producing composite parts, by filling a metal shell with metal-polymer to enhance strength and reduce cost. Discussing the challenges of manufacturing composite structures, the focus is on the development of metal-polymer casting technology and the difficulties of filling a metal shell with metal-polymer.

POLYMERS (2022)

Add to Collection

Article Polymer Science

A Review of Polymer-Based Materials for Fused Filament Fabrication (FFF): Focus on Sustainability and Recycled Materials

Daniela Fico et al.

Summary: Fused Filament Fabrication (FFF) is a promising additive manufacturing technique, but there are challenges in converting FFF-printed prototypes into functional objects for industrial applications. Scientists are focusing on developing biodegradable green materials to address the issue of waste disposal from non-biodegradable materials.

POLYMERS (2022)

Add to Collection

Article Materials Science, Biomaterials

Poly lactic acid (PLA) polymers: from properties to biomedical applications

Farnoosh Ebrahimi et al.

Summary: Polylactic acid (PLA), a bioabsorbable and compostable polyester, has evolved into a competitive commodity material in recent years. Understanding PLA properties is crucial for efficient therapy in biomedical applications. PLA can be blended or copolymerized with other components for slow degradation in vivo without inflammatory reaction or infection.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2022)

Add to Collection

Article Engineering, Chemical

Multiple recycling of a PLA/PHB biopolymer blend for sustainable packaging applications: Rheology-morphology, thermal, and mechanical performance analysis

Naiara C. Farias et al.

Summary: The effects of multiple mechanical recycling on the rheology-morphology relationships, thermal, and mechanical properties of blends of poly(lactic acid) (PLA)/poly(3-hydroxybutyrate) (PHB) were investigated. The results showed that recycling improved the interfacial interaction of the phases through limited transesterification reactions and increased homogeneous morphologies. There was a reduction in viscosity, but no chain scission or degradation was observed. The reprocessed samples exhibited higher crystallinity, lower T-g and cold crystallization temperatures, and maintained their tensile and impact properties.

POLYMER ENGINEERING AND SCIENCE (2022)

Add to Collection

Article Polymer Science

The Effect of Agglomeration on the Electrical and Mechanical Properties of Polymer Matrix Nanocomposites Reinforced with Carbon Nanotubes

Sebastian Tamayo-Vegas et al.

Summary: In this study, the effect of carbon nanotubes addition and agglomeration formation on the mechanical and electrical properties of CNT-polymer-based nanocomposites was investigated. Experimental and numerical analyses revealed that the agglomeration of CNTs adversely affected the mechanical performance but positively influenced the electrical conductivity.

POLYMERS (2022)

Add to Collection

Article Polymer Science

FDM Printability of PLA Based-Materials: The Key Role of the Rheological Behavior

Rossella Arrigo et al.

Summary: This study accurately characterized the rheological behavior of several 3D-printable polylactic acid-based filaments, evaluated their 3D printing ability in FDM technology, and related the rheological features of the materials to their composition and microstructure, providing a useful tool for designing thermoplastic-based formulations with appropriate rheological performance.

POLYMERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Functionalized carbon nanotubes for 3D-printed PLA-nanocomposites: Effects on thermal and mechanical properties

L. S. De Bortoli et al.

Summary: In this study, functionalized carbon nanotubes (f-CNT) were used as additives in 3D-printed PLA/CNT nanocomposites to improve their thermal and mechanical properties. The functionalization of CNTs improved their dispersion in the PLA matrix and acted as effective nucleating agents for PLA crystallization, resulting in increased mechanical strength and better interfacial adhesion between printed layers. The addition of as little as 0.5 wt% of f-CNT significantly improved the mechanical properties and maintained the thermal stability of the nanocomposites.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Additive manufacturing of polymer-derived ceramics: Materials, technologies, properties and potential applications

Raghvendra Pratap Chaudhary et al.

Summary: This review summarizes the recent research progress on the additive manufacturing of preceramic polymers (PCPs) and the corresponding polymer-derived ceramics (PDCs) for different applications. The synthesis methods of various PCPs and their tunable chemical formulations for AM processes are discussed. The review also compares the advantages and drawbacks of PDC technology and AM technologies with PCPs in comparison to powder-based ceramic 3D printing. Furthermore, the complex-shaped PDC structures, their properties, and potential applications are discussed.

PROGRESS IN MATERIALS SCIENCE (2022)

Add to Collection

Article Polymer Science

Toughening and Heat-Resistant Modification of Degradable PLA/PBS-Based Composites by Using Glass Fiber/Silicon Dioxide Hybrid Fillers

Junchang Gao et al.

Summary: In this study, the toughness and heat resistance properties of PLA/PBS composites were enhanced by modifying the matrix with different fillers. The addition of GF, GF/SiO2, and GF/PAC significantly improved the mechanical properties of the composites. Among the fillers, the 10%GF/1%SiO2 showed the best strengthening, toughening, and heat resistant effects.

POLYMERS (2022)

Add to Collection

Article Polymer Science

A Study on the Gamma Radiation Protection Effectiveness of Nano/Micro-MgO-Reinforced Novel Silicon Rubber for Medical Applications

M. Sayyed et al.

Summary: In this study, the researchers investigated the potential of novel polymer composites for radiation protection applications. By incorporating different concentrations of micro- and nano-sized MgO into silicon rubber, the researchers found that the polymer composites with nano-MgO exhibited higher linear attenuation factors and lower mean free paths compared to those with micro-MgO. These findings highlight the importance of using high MgO content in silicon rubber for low-energy radiation protection applications.

POLYMERS (2022)

Add to Collection

Article Materials Science, Ceramics

Enhanced moderate electric field dielectric energy storage performance in (Bi0.5Na0.5)TiO3-based lead-free ceramics

Bo Yan et al.

Summary: Lead-free relaxor ferroelectric ceramics have been prepared and characterized. The ceramic with the composition of 0.85BNKT-0.15SMN shows the best overall performance with high energy storage density and efficiency, as well as excellent temperature and frequency stability.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Polymer Science

Silicon Carbide Nanoparticles as a Mechanical Boosting Agent in Material Extrusion 3D-Printed Polycarbonate

Markos Petousis et al.

Summary: The effect of silicon carbide as a boosting agent of the mechanical response of polycarbonate polymer was investigated. The study aimed to fabricate nanocomposites with improved mechanical performance and expand the utilization of 3D printing. The results showed that silicon carbide can enhance the mechanical performance of polycarbonate thermoplastic.

POLYMERS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Printing parameters and materials affecting mechanical properties of FDM-3D printed Parts: Perspective and prospects

Manav Doshi et al.

Summary: This article provides a comprehensive review of printing parameters that directly influence the mechanical properties of FDM-produced parts, and offers detailed information on various materials used in the process. The study considers key printing parameters such as layer thickness, infill density and pattern, printing speed, build orientation, and raster angle.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Materials Science, Ceramics

Effect of MgO sintering additive on mullite structures manufactured by fused deposition modeling (FDM) technology

Fateme Sarraf et al.

Summary: By optimizing the recipe and using MgO sintering additive, the density of mullite ceramic can be achieved while reducing the impact of printing direction on mechanical strength. The study found that the closed porosity formed during the degassing of preceramic polymer contributes to the low Weibull modulus observed.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Polymer Materials Reinforced with Silicon Nitride Particles for 3D Printing

O. B. Zgalat-Lozynskyy et al.

Summary: The study involved producing ceramic-reinforced polymer filaments by incorporating Si3N4 particles into polyethylene or polypropylene. The mechanical properties were determined using a 2D finite-element model, showing the need for increased hard particle volume to improve elastic modulus. The polymer-ceramic filaments displayed high fracture resistance in 3D printing.

POWDER METALLURGY AND METAL CERAMICS (2021)

Add to Collection

Article Polymer Science

Investigation on the α/δ Crystal Transition of Poly(l-lactic Acid) with Different Molecular Weights

Lei Zhang et al.

Summary: This study investigated the transition of PLLA crystal forms by preparing PLLA with different molecular weights and found that decreasing molecular weight leads to a transition from the delta form to the alpha form. The research indicated that the transition of crystal forms is not only temperature-dependent, but also related to the entanglement state before crystallization.

POLYMERS (2021)

Add to Collection

Article Materials Science, Composites

Fracture behavior of 3D printed carbon fiber-reinforced polymer composites

Denizhan Yavas et al.

Summary: This study investigates the inter-layer and cross-layer fracture behavior of 3D printed short CFRP composites through experimental and numerical methods. The cross-layer fracture toughness was found to be three-fold of the inter-layer counterparts. Fracture surface morphology and crack-tip strain field demonstrated different toughening mechanisms for cross-layer and inter-layer fractures.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Mechanics

Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours

I Tirado-Garcia et al.

Summary: This study focuses on the mechanical, electrical, and thermal behaviors of 3D printed polymeric composites filled with carbon black conductive particles, investigating the influence of printing direction on material properties and identifying strong thermo-electro-mechanical interplays.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Optimization of printing parameters of 3D-printed continuous glass fiber reinforced polylactic acid composites

Ke Chen et al.

Summary: A novel 3D printing strategy for continuous glass fiber reinforced polylactic acid (CGF/PLA) composites was proposed, with optimized impregnation process and use of a specific compatibilizer to enhance interfacial bonding. The mechanical properties and microstructure of the final printed products were studied, showing flexural strength of 312 MPa and flexural modulus of 21.5 GPa. The fabrication strategies offer a low-cost and high-strength method for industrial application of 3D printed continuous fiber reinforced thermoplastic composites.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

Evaluating the tribological and mechanical properties of filament wound composite incorporated with PTFE fibers and tungsten carbide filler applicable for self-lubricating bearings

Fatemeh Shahramforouz et al.

Summary: This study investigated the tribological and mechanical properties of hybrid E-glass + PTFE/epoxy and Kevlar + PTFE/epoxy self-lubricating composite bearings. Results showed that composites containing 20% glass + 80% PTFE and 20% Kevlar + 80% PTFE exhibited the most effective lubricating performance, with the 20% Kevlar + 80% PTFE composite having the lowest friction coefficient. Additionally, the transfer film with a large amount of 'fluorine' and 'carbon' elements contributed to decreasing the friction coefficient.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2021)

Add to Collection

Article Engineering, Chemical

Thermal degradation kinetics study of molten polylactide based on Raman spectroscopy

Zenan Lin et al.

Summary: This study utilized a unique Raman system to explore the thermal degradation kinetics of molten PLA under different temperatures and atmospheres. The intensity of specific Raman bands was found to correlate with the concentration of functional groups in PLA during degradation, and kinetic models based on the intensity of C-COO bands revealed the quantitative impact of temperature and atmosphere on degradation. Time sweep rheological tests corroborated the spectral analyses, demonstrating the feasibility of Raman spectroscopy for thermal degradation kinetic analysis.

POLYMER ENGINEERING AND SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Influence of Nanoparticles from Waste Materials on Mechanical Properties, Durability and Microstructure of UHPC

Sahar A. Mostafa et al.

MATERIALS (2020)

Add to Collection

Article Automation & Control Systems

Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials

Nadir Ayrilmis et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Nondestructive characterization of the polycarbonate - octadecylamine interface by surface enhanced Raman spectroscopy

C. Zimmerer et al.

POLYMER TESTING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A Simulation Work for the Influences of Aggregation/Agglomeration of Clay Layers on the Tensile Properties of Nanocomposites

Yasser Zare et al.

JOM (2019)

Add to Collection

Article Polymer Science

Analysis of PLA Geometric Properties Processed by FFF Additive Manufacturing: Effects of Process Parameters and Plate-Extruder Precision Motion

Eustaquio Garcia Plaza et al.

POLYMERS (2019)

Add to Collection

Article Chemistry, Physical

Dimensional Accuracy and Mechanical Properties of Chopped Carbon Reinforced Polymers Produced by Material Extrusion Additive Manufacturing

Evren Yasa et al.

MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Rheological, Thermal, and Degradation Properties of PLA/PPG Blends

Dong Xie et al.

MATERIALS (2019)

Add to Collection

Review Materials Science, Paper & Wood

Probing cellulose structures with vibrational spectroscopy

Mohamadamin Makarem et al.

CELLULOSE (2019)

Add to Collection

Review Materials Science, Ceramics

3D printing of ceramics: A review

Zhangwei Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Using additive manufacturing applications for design and development of food and agricultural equipments

Mohd Javaid et al.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2019)

Add to Collection

Review Engineering, Multidisciplinary

Reinforcements in multi-scale polymer composites: Processing, properties, and applications

Garima Mittal et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Review Chemistry, Physical

Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

Joamin Gonzalez-Gutierrez et al.

MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Fused Filament Fabrication of Small Ceramic Components

Dorit Noetzel et al.

MATERIALS (2018)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Investigation of crystalline structure of plasticized poly (lactic acid)/Banana nanofibers composites

T. Farid et al.

2018 5TH GLOBAL CONFERENCE ON POLYMER AND COMPOSITE MATERIALS (PCM 2018) (2018)

Add to Collection

Article Engineering, Multidisciplinary

Characterization of mechanical properties of aluminium/tungsten carbide composites

K. Ravikumar et al.

MEASUREMENT (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Measurements of the mechanical response of unidirectional 3D-printed PLA

Y. Song et al.

MATERIALS & DESIGN (2017)

Add to Collection

Article Materials Science, Characterization & Testing

Effect of Aminosilane Concentrations on the Properties of Poly(Lactic Acid)/Kenaf-Derived Cellulose Composites

Yee Bond Tee et al.

POLYMERS & POLYMER COMPOSITES (2017)

Add to Collection

Article Engineering, Multidisciplinary

Investigating the crystallization behavior of poly(lactic acid) using CdSe/ZnS quantum dots as heterogeneous nucleating agents

Xinghou Gong et al.

COMPOSITES PART B-ENGINEERING (2016)

Add to Collection

Article Health Care Sciences & Services

3D-printing and the effect on medical costs: a new era?

Yahya E. Choonara et al.

EXPERT REVIEW OF PHARMACOECONOMICS & OUTCOMES RESEARCH (2016)

Add to Collection

Article Engineering, Multidisciplinary

Influence of glass microspheres on selected properties of polylactide composites

Rafal Malinowski et al.

COMPOSITES PART B-ENGINEERING (2015)

Add to Collection

Article Materials Science, Characterization & Testing

Biodegradability study of polylactic acid/thermoplastic polyurethane blends

Vladislav Jaso et al.

POLYMER TESTING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Raman and Photoluminescence spectroscopy of polycarbonate matrices irradiated with different energy 28Si+ ions

V. Resta et al.

VACUUM (2015)

Add to Collection

Article Materials Science, Ceramics

Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities

Andrea Zocca et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Add to Collection

Article Polymer Science

Thermal, Rheological and Morphological Properties of Poly (Lactic Acid) (PLA) and Talc Composites

Talita Ferreira Cipriano et al.

POLIMEROS-CIENCIA E TECNOLOGIA (2014)

Add to Collection

Article Chemistry, Physical

Viscoelastic Behavior and Reinforcement Mechanism in Rubber Nanocomposites in the Vicinity of Spherical Nanoparticles

P. Bindu et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2013)

Add to Collection

Article Materials Science, Ceramics

Multifunctional advanced ceramics from preceramic polymers and nano-sized active fillers

P. Colombo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)

Add to Collection

Article Engineering, Mechanical

Tribological behavior of natural fiber reinforced PLA composites

Pramendra Kumar Bajpai et al.

WEAR (2013)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Erosive wear behaviour of WC filled glass epoxy composites

N. Mohan et al.

INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013 (2013)

Add to Collection

Review Engineering, Mechanical

Additive manufacturing: technology, applications and research needs

Nannan Guo et al.

FRONTIERS OF MECHANICAL ENGINEERING (2013)

Add to Collection

Article Materials Science, Multidisciplinary

New approach to the double melting peak of poly(L-lactic acid) observed by DSC

Carlos A. Gracia-Fernandez et al.

JOURNAL OF MATERIALS RESEARCH (2012)

Add to Collection

Article Materials Science, Composites

Functionalized cellulose nanocrystals as biobased nucleation agents in poly(L-lactide) (PLLA) - Crystallization and mechanical property effects

Aihua Pei et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

Add to Collection

Article Polymer Science

Polylactide/Nano- and Micro-Scale Silica Composite Films. II. Melting Behavior and Cold Crystallization

Jiann-Wen Huang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Add to Collection

Article Thermodynamics

Thermal degradation of poly(lactic acid) measured by thermogravimetry coupled to Fourier transform infrared spectroscopy

Hantao Zou et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2009)

Add to Collection

Article Materials Science, Composites

Reinforcing efficiency of nanoparticles: A simple comparison for polymer nanocomposites

Hua Liu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

Add to Collection

Article Polymer Science

Structure and mechanical properties of thermoplastic polyurethane, based an hyperbranched polyesters

Qi Cao et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2006)

Add to Collection

Article Polymer Science

Kinetics of thermo-oxidative and thermal degradation of poy(D,L-lactide) (PDLLA) at processing temperature

Xiaobo Liu et al.

POLYMER DEGRADATION AND STABILITY (2006)

Add to Collection

Article Materials Science, Ceramics

A study on the fundamental ceramic-polymer interactions in the high CeO2-loading polyethylene glycol blend

X Yin et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Development of new metal/polymer materials for rapid tooling using Fused deposition modelling

SH Masood et al.

MATERIALS & DESIGN (2004)

Add to Collection

Article Engineering, Manufacturing

Fatigue fracture investigation of cemented carbide tools in gear hobbing, Part 2: The effect of cutting parameters on the level of tool stresses - A quantitative parametric analysis

A Antoniadis et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Toughening of a brittle thermosetting polymer: Effects of reinforcement particle size and volume fraction

RP Singh et al.

JOURNAL OF MATERIALS SCIENCE (2002)

Add to Collection

Article Engineering, Industrial

Critical parameters influencing the quality of prototypes in fused deposition modelling

R Anitha et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)

Add to Collection

Article Materials Science, Coatings & Films

Optimization of the cutting edge radius of PVD coated inserts in milling considering film fatigue failure mechanisms

KD Bouzakis et al.

SURFACE & COATINGS TECHNOLOGY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.