☆ 4.7 Article

Iodine and Nickel Ions Adsorption by Conjugated Copolymers Bearing Repeating Units of Dicyclopentapyrenyl and Various Thiophene Derivatives

POLYMERS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

In situ growth of UiO-66-NH2 in wood-derived cellulose for iodine adsorption

Shenglong Tian et al.

Summary: In this study, a hierarchically porous UiO-66-NH2 @WCA composite was synthesized by in-situ synthesis of UiO-66-NH2 in wood-derived cellulose aerogel (WCA). The composite exhibited high adsorption capacity for iodine vapor and iodine aqueous solution, and the adsorption behavior in iodine aqueous solution was well predicted by the Freundlich isotherm and pseudo-second-order kinetic model. The adsorption capacity was highest at pH 6, and the ionic strength had little effect. The hydroxyl groups on the WCA matrix provided additional sites for iodine capture. The composite also showed excellent recyclability and potential for practical application.

JOURNAL OF HAZARDOUS MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Selective separation and simultaneous recoveries of amino acids by temperature-sensitive magnetic ionic liquid aqueous biphasic system

Tian Yao et al.

Summary: Two temperature-sensitive magnetic ionic liquids (MILs) based on polypropylene glycol 600 were used to construct novel temperature-sensitive magnetic ionic liquid aqueous biphasic systems (MILABSs) with different inorganic salts. Phase behaviors were studied in detail to give useful guidance for practical separation applications. These developed temperature-sensitive MILABSs were further employed for the selective separation of arginine and tyrosine mixtures as well as their simultaneous recoveries.

JOURNAL OF MOLECULAR LIQUIDS (2023)

Add to Collection

Article Food Science & Technology

Functionalized aqueous biphasic system coupled with HPLC for highly sensitive detection of quinolones in milk

Tian Yao et al.

Summary: Two PPG1000 based thermo-sensitive magnetic ionic liquids were synthesized and employed for the first time to achieve successive enrichments and highly sensitive detection of trace amount of quinolones in milk using a novel analytical method. The method combines rapid pretreatment, organic solvent-free extraction, magnet assisted phase separation, and recyclability of magnetic ionic liquid. It showed satisfactory results in terms of recoveries, linear ranges, enrichment factors, precisions, limits of detection and quantification, and analysis of real milk.

LWT-FOOD SCIENCE AND TECHNOLOGY (2023)

Add to Collection

Article Green & Sustainable Science & Technology

Adsorption of nickel(II) ions from aqueous solutions using Malatya clay: Equilibrium, kinetic, and thermodynamic studies

Nilgun Onursal et al.

Summary: This study evaluated the efficiency of Malatya clay (MC) in removing Ni(II) ions from aqueous solutions. The optimal conditions for adsorption included an initial Ni(II) ion concentration of 5 mg/L, a contact duration of 360 min, and a pH of 6.27. Surface characteristics of MC were examined using various techniques, revealing its effectiveness in chemical adsorption. Thermodynamic studies showed that the adsorption of Ni(II) on MC is spontaneous and endothermic. MC has demonstrated to be a cost-effective and environmentally-friendly alternative for Ni(II) ion removal, without the need for chemical treatment.

ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2023)

Add to Collection

Article Agricultural Engineering

Iodine removal efficiently from wastewater by magnetic Fe3O4 incorporated within activated porous cellulose

Hossam E. Emam et al.

INDUSTRIAL CROPS AND PRODUCTS (2023)

Add to Collection

Article Environmental Sciences

Nickel removal from wastewater using electrocoagulation process with zinc electrodes under various operating conditions: performance investigation, mechanism exploration, and cost analysis

Omar A. Shaker et al.

Summary: This study investigates the removal of nickel (Ni) from synthetic and real wastewater using the electrocoagulation method. The results demonstrate that electrocoagulation has a better performance in Ni removal compared to chemical coagulation. The optimal operating conditions are a current density of 10 mA/cm(2), a pH of 9.2, and a gap distance of 4 cm. The kinetic data are best represented by the second-order Lagergren model. The maximum electrical energy consumption for Ni removal is 23.79 KWh/m(3).

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2023)

Add to Collection

Article Multidisciplinary Sciences

Effect of different synthesis methodologies on the adsorption of iodine

Guowei Yuan et al.

Summary: In this study, dynamic Cu/Ag-mordenite (Cu/Ag-MOR) material was synthesized and characterized. It was found that Cu/Ag-MOR material exhibited high selectivity for adsorbing iodine ions, with a removal rate of 99.1% in adsorption tests. Furthermore, dynamic Cu/Ag-MOR materials showed good applicability in complex situations where multiple pollutants co-exist.

HELIYON (2023)

Add to Collection

Article Biochemical Research Methods

Application of cellulose to chromatographic media: Cellulose dissolution, and media fabrication and derivatization

Tian Yao et al.

Summary: The development of high-performance chromatographic media is essential in improving the efficiency of purifying biological macromolecules. Cellulose is a popular choice due to its abundant hydroxyl group, easy modification, and weak non-specific adsorption. This paper reviews the development of cellulose solvent systems, typical preparation methods of cellulose chromatographic media, and the enhancement of their properties through polymeric ligand grafting strategies.

JOURNAL OF CHROMATOGRAPHY A (2023)

Add to Collection

Article Nanoscience & Nanotechnology

High Uptake of the Carcinogenic Pararosaniline Hydrochloride Dye from Water Using Carbazole-Containing Conjugated Copolymers Synthesized from a One-Pot Cyclopentannulation Reaction

Suchetha Shetty et al.

Summary: Three conjugated copolymers (CAP1-3) were successfully synthesized in one-step using a specially designed diethynyl carbazole synthon and various dibrominated polycondensed aromatic hydrocarbons (PAHs). The obtained copolymers exhibited excellent yields and their structures were confirmed by H-1- and C-13- nuclear magnetic spectroscopy. The copolymers (CAP1-3) also demonstrated outstanding capacity for adsorbing the carcinogenic dye BR9 from aqueous solutions, with an adsorption capacity maximum of 483.09 mg g(-1) and a high adsorption efficiency after multiple cycles.

ACS APPLIED MATERIALS & INTERFACES (2023)

Add to Collection

Article Engineering, Environmental

Design and synthesis of thiophene containing bis-chalcone-based mesoporous polymers for volatile iodine capture

P. Sowmya et al.

Summary: Two novel thiophene-containing bis-chalcone-based polymers, PTCA and PTCM, were synthesized via FeCl3 mediated oxidative coupling polymerization. The polymers were confirmed by FT-IR and UV-DRS analysis, and characterized by PXRD, SEM, TEM, TGA, CHNS, and BET analysis techniques. Despite their low surface area, they showed significant applications in environmental remediation due to their mesoporous structure and excellent stability. The polymers exhibited high iodine capture capacity and can be efficiently recycled and reused without significant loss of iodine uptake.

JOURNAL OF HAZARDOUS MATERIALS ADVANCES (2023)

Add to Collection

Article Engineering, Chemical

Extraction and recovery of phenolic compounds from aqueous solution by thermo-separating magnetic ionic liquid aqueous two-phase system

Tian Yao et al.

Summary: The report introduces thermo-separating magnetic ionic liquids (MILs) for the first time, detailing the synthesis, characterization, and application of two PPG600-based thermo-separating MILs, which were used to create a novel MILATPS system. The system showed high extraction efficiencies for phenolic compounds, exceeding 90%, and demonstrated potential for industrial treatment of phenolic wastewater with efficient recovery processes.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Modular Nitrogen-Doped Concave Polycyclic Aromatic Hydrocarbons for High-Performance Organic Light-Emitting Diodes with Tunable Emission Mechanisms

Jakub Wagner et al.

Summary: In this study, the synthesis and characterization of curved and fully conjugated nitrogen-doped PAHs were reported. By modifying the structure of the electron-accepting moiety, the luminescence mechanism was switched between TADF and RTP, and the overall PLQY was tuned in the range of 9% to 86%. Solid-state OLED devices were constructed, achieving a high external quantum efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Chemistry, Physical

Near-IR study of the impact of alkyl-ammonium and -phosphonium cations on the hydration of montmorillonite

Michal Slany et al.

Summary: This study investigated the effect of organic cations on the water adsorption capacity of montmorillonite. The samples were characterized using carbon analysis, N-2 adsorption, X-ray powder diffraction analysis, and infrared spectroscopy. The results showed that the adsorption capacity of water decreased with increasing size of the organic cations. It was also found that montmorillonites saturated with alkylphosphonium cations exhibited higher hydrophobicity compared to those with alkylammonium cations.

JOURNAL OF MOLECULAR STRUCTURE (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Leveraging Nitrogen Linkages in the Formation of a Porous Thorium-Organic Nanotube Suitable for Iodine Capture

Ashley M. Hastings et al.

Summary: We report the synthesis, characterization, and iodine capture application of a novel thorium-organic nanotube, TSN-626. The unique structure and classification of TSN-626 as a metal-organic nanotube distinguish it from other metal-organic frameworks. The study confirms the excellent performance of TSN-626 in iodine capture and provides new insights into metal-ligand bonding and unconventional topological expressions.

INORGANIC CHEMISTRY (2022)

Add to Collection

Article Polymer Science

Synthesis and Iodine Adsorption Properties of Organometallic Copolymers with Propeller-Shaped Fe(II) Clathrochelates Bridged by Different Diaryl Thioether and Their Oxidized Sulfone Derivatives

Suchetha Shetty et al.

Summary: Three organometallic copolymers with iron(II) clathrochelate units and excellent iodine adsorption properties were synthesized and characterized. Regeneration tests confirmed their high efficiency for iodine adsorption even after multiple cycles of adsorption-desorption.

POLYMERS (2022)

Add to Collection

Article Engineering, Environmental

Selective removal of radioactive iodine from water using reusable Fe@Pt adsorbents

Hwakyeung Jeong et al.

Summary: This study developed platinum-coated iron nanoparticles (Fe@Pt) as a highly selective and reusable adsorbent for the removal of radioactive iodine species. Fe@Pt demonstrated excellent removal efficiency and stability, making it a promising option for environmental restoration after nuclear accidents.

WATER RESEARCH (2022)

Add to Collection

Article Engineering, Environmental

Removing miscellaneous heavy metals by all-in-one ion exchange-nanofiltration membrane

Zheng-Jun Fu et al.

Summary: The treatment of wastewater containing heavy metal mixtures is crucial for human and environmental health. We have successfully integrated ion exchange and nanofiltration into a single iNF membrane, allowing for efficient removal of heavy metal ions. This integrated process is simple, scalable, and universally applicable.

WATER RESEARCH (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Efficient Iodine Capture and CO2 Adsorption using a Triazine-Based Conjugated Microporous Polymers

Yu Qiao et al.

Summary: Three triazine-based conjugated microporous polymers with permanent porous structure and high stability were successfully synthesized under ionothermal conditions. Among them, CMP@3 exhibited outstanding adsorption capacity for CO2 and iodine, showing potential applications in I-2 adsorption field.

CHEMISTRYSELECT (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Fabrication of Protonated Two-Dimensional Metal-Organic Framework Nanosheets for Highly Efficient Iodine Capture from Water

Cai-Xia Yu et al.

Summary: In this study, a metal-organic framework (MOF) nanosheet with a positive charge was constructed for the efficient capture of radioactive iodine. The as-synthesized ultrathin nanosheets exhibited a record-high iodine adsorption capacity in aqueous solution, with fast adsorption and desorption kinetics.

INORGANIC CHEMISTRY (2022)

Add to Collection

Article Engineering, Chemical

Developing novel amine-linked covalent organic frameworks towards reversible iodine capture

Nazanin Mokhtari et al.

Summary: This paper presents a method to remove radio iodine, one of the essential gaseous pollutions in nuclear energy consumption, using an amine-linked covalent organic framework (COF). The flexibility and abundance of NH groups in the COF structure provide a great medium for iodine adsorption from both liquid and gas phases. The experiment results show that NH-COF has better iodine adsorption performance than Hz-COF in both gas phase and solution, indicating its excellent adaptability and high adsorption capacity.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Polymer Science

Synthesis of Iron(II) Clathrochelate-Based Poly(vinylene sulfide) with Tetraphenylbenzene Bridging Units and Their Selective Oxidation into Their Corresponding Poly(vinylene sulfone) Copolymers: Promising Materials for Iodine Capture

Noorullah Baig et al.

Summary: In this study, a simple and efficient synthetic methodology was developed to engineer functional polymer materials for gas adsorption. Metalorganic poly(vinylene sulfide) copolymers with iron(II) clathrochelate and various side groups were synthesized and subsequently oxidized into their respective poly(vinylene sulfone) copolymers under green reaction conditions. The copolymers showed high iodine adsorption properties, with efficient regeneration, highlighting the importance of iron(II) clathrochelate polymers in iodine capture.

POLYMERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Study on the Adsorption Mechanism of Cobalt and Nickel in Manganese Sulfate by δ-MnO2

Pan Yang et al.

Summary: The study investigated the adsorption of cobalt and nickel ions in MnSO4 solution by delta-MnO2 from different manganese sources, and found that under certain conditions, the adsorption rate of Co2+ and Ni2+ could reach more than 80%. The characterization revealed that the adsorption of cobalt and nickel by delta-MnO2 was through the reaction of its surface hydroxyl with metal ions to form SOMOH.

ACS OMEGA (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Dithieno[3,2-b:2′,3′-d]thiophene (DTT): an emerging heterocyclic building block for future organic electronic materials & functional supramolecular chemistry

Rashid Ali et al.

Summary: In this review article, the recent advancements in DTT-based architectures are reported, highlighting their potential applications in organic electronics. The article aims to motivate young researchers worldwide to explore challenging opportunities related to this unique building block in both material sciences and functional supramolecular chemistry.

RSC ADVANCES (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Gaining control over conjugated polymer morphology to improve the performance of organic electronics

Nadzeya A. Kukhta et al.

Summary: This article highlights the importance of investigating the microstructure of conjugated polymers (CPs) and discusses previous developments in this field. Understanding the interplay between CP microstructure and properties can help improve the performance of organic electronic devices and enable easier device optimization and fabrication.

CHEMICAL COMMUNICATIONS (2022)

Add to Collection

Article Engineering, Chemical

Extractive resolution of racemic phenylalanine and preparation of optically pure product by chiral magnetic ionic liquid aqueous two-phase system

Tian Yao et al.

Summary: A novel chiral magnetic ionic liquid aqueous two-phase system was developed for the extractive resolution of racemic phenylalanine, achieving high optical purity in both L-phenylalanine and D-phenylalanine. This green and recyclable approach showed great potential in industry with consistently good resolution ability even in gram-scale.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Polymer Science

Engineering Functionality in Organic Porous Networks by Multicomponent Polymerization

Bingyan Zhou et al.

Summary: The development of alkynyl imine-containing porous organic polymers by a one-pot multicomponent polymerization reaction has shown promising potential for efficient iodine capture, with the ability to tune the iodine capture performances by altering the content of alkynyl imine groups in the networks. The adsorption mechanism involves chemisorption and physisorption, paving a new way for developing porous polymers with intriguing functionality and applications.

MACROMOLECULES (2021)

Add to Collection

Article Polymer Science

Sizable iodine uptake of porous copolymer networks bearing Troger's base units

Suchetha Shetty et al.

Summary: Copolymer networks containing Troger's base units TBP1-3 were synthesized by Sonogashira cross-coupling reaction, demonstrating high thermal stability and excellent nitrogen adsorption properties. The correlation between porosity and the geometry of the aryl spacer was identified, with different structures of copolymers showing varying iodine adsorption performance, removal efficiency, and reusability.

POLYMER (2021)

Add to Collection

Review Engineering, Chemical

Removal of heavy metal ions from wastewater: a comprehensive and critical review

Naef A. A. Qasem et al.

Summary: Removal of heavy metal ions from wastewater is crucial for a clean environment and human health, with methods including adsorption, membrane, chemical, electric, and photocatalytic treatments. Recent studies have mainly focused on adsorption techniques, facing challenges in removing different ion types concurrently, high retention time, and cycling stability of adsorbents.

NPJ CLEAN WATER (2021)

Add to Collection

Article Polymer Science

Removal of Nickel Ions from Aqueous Solutions by 2-Hydroxyethyl Acrylate/Itaconic Acid Hydrogels Optimized with Response Surface Methodology

Katarina Antic et al.

Summary: This study investigated the adsorption of Ni2+ ions from water solutions using hydrogels based on HEA and IA. The optimized hydrogel synthesis process and characterization using FTIR, SEM and AFM were conducted. Batch equilibrium experiments revealed the efficiency of the HEA/IA hydrogel as a sorbent for Ni2+ ion removal, with detailed studies on kinetic and thermodynamic properties confirming its potential application in water treatment.

GELS (2021)

Add to Collection

Article Engineering, Environmental

Preparation of sulfur-containing conjugated microporous polymer for adsorbing iodine and Fe3+ sensing

Jiazhang Xu et al.

Summary: Research on the adsorption of iodine by porous organic polymers has led to the successful preparation of two new thiol-linked conjugated microporous polymers. These polymers exhibit improved capability in capturing iodine by introducing electron-rich groups, and have potential importance in industrial applications for water treatment.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fluorinated Iron(ii) clathrochelate units in metalorganic based copolymers: improved porosity, iodine uptake, and dye adsorption properties

Suchetha Shetty et al.

Summary: The study reports the successful synthesis of metalorganic copolymers and investigates their porosity properties and adsorption capacity. The results show that some metalorganic copolymers have good adsorption performance and exhibit good adsorption of organic dyes.

RSC ADVANCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

The synthesis of triazine-thiophene-thiophene conjugated porous polymers and their composites with carbon as anode materials in lithium-ion batteries

Xin Xue et al.

Summary: The synthesized polymers based on different thiophene derivatives and their composite materials with Vulcan XC-72 carbon show distinctive morphologies and electrochemical performances. The conjugated microporous polymers with longer thiophene derivatives exhibit improved capacities due to the enlarged conjugation length and planarity of the linkage units.

RSC ADVANCES (2021)

Add to Collection

Article Polymer Science

Conjugated microporous polymers using a copper-catalyzed [4+2] cyclobenzannulation reaction: promising materials for iodine and dye adsorption

Noorullah Baig et al.

Summary: The design strategy involves synthesizing conjugated microporous polymers (CMPs) using a versatile copper-catalyzed [4 + 2] cyclobenzannulation reaction. The synthesized polymers exhibit high Brunauer-Emmett-Teller (BET) surface areas, significant pore volumes, and efficient dye adsorption properties, demonstrating their potential for applications in pollutant removal.

POLYMER CHEMISTRY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Covalent organic frameworks: an ideal platform for designing ordered materials and advanced applications

Ruoyang Liu et al.

Summary: Covalent organic frameworks provide a platform for integrating organic units into ordered polymers, allowing for pre-designed structures and enhanced capabilities in designing organic materials. The progress in COF design and exploration has laid a foundation for the field, demonstrating potential in developing unique organic materials. By analyzing historical developments, understanding structural components and functional design strategies, a clearer picture of COFs' materials and applications emerges, revealing principles for designing unique functions inherent to structures.

CHEMICAL SOCIETY REVIEWS (2021)

Add to Collection

Article Engineering, Environmental

Capture of iodine in solution and vapor phases by newly synthesized and characterized encapsulated Cu2O nanoparticles into the TMU-17-NH2 MOF

Mahtab Yadollahi et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Review Environmental Sciences

Removal of Heavy Metal Ions from Water and Wastewaters by Sulfur-Containing Precipitation Agents

Alina Pohl

WATER AIR AND SOIL POLLUTION (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Efficient Capture of Volatile Iodine by Thiophene-Containing Porous Organic Polymers

Wanjun Du et al.

ACS APPLIED POLYMER MATERIALS (2020)

Add to Collection

Article Polymer Science

Synthesis of conjugated polymers via cyclopentannulation reaction: promising materials for iodine adsorption

Noorullah Baig et al.

POLYMER CHEMISTRY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Adsorption Behavior of Iodine by Novel Covalent Organic Polymers Constructed Through Heterostructural Mixed Linkers

Heda Guan et al.

FRONTIERS IN MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Polycyclic Aromatic Hydrocarbons as Potential Building Blocks for Organic Solar Cells

Cyril Aumaitre et al.

CHEMICAL RECORD (2019)

Add to Collection

Article Chemistry, Multidisciplinary

B2N2-Embedded Polycyclic Aromatic Hydrocarbons with Furan and Thiophene Derivatives Functionalized in Crossed Directions

Yijing Chen et al.

CHEMISTRY-A EUROPEAN JOURNAL (2019)

Add to Collection

Article Chemistry, Physical

Iodine sequestration using cyclophosphazene based inorganic-organic hybrid nanoporous materials: Role of surface functionality and pore size distribution

Raeesh Muhammad et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Simultaneous Removal of Multiple Heavy Metal Ions from River Water Using Ultrafine Mesoporous Magnetite Nanoparticles

Fato Patrice Fato et al.

ACS OMEGA (2019)

Add to Collection

Article Water Resources

Removal of nickel (II) from aqueous solution by biosorption on A. barbadensis Miller waste leaves powder

Shweta Gupta et al.

APPLIED WATER SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Simultaneous Removal of Multiple Heavy Metal Ions from River Water Using Ultrafine Mesoporous Magnetite Nanoparticles

Tano Patrice Fato et al.

ACS OMEGA (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Porous Silsesquioxane-Imine Frameworks as Highly Efficient Adsorbents for Cooperative Iodine Capture

Mateusz Janeta et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Polymer Science

Tuning the optical properties of ethynylene triptycene-based copolymers via oxidation of their alkyne groups into -diketones

Bassam Alameddine et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2018)

Add to Collection

Article Nuclear Science & Technology

Experimental studies on retention of iodine in a wet scrubber

Ignazio Beghi et al.

NUCLEAR ENGINEERING AND DESIGN (2018)

Add to Collection

Article Multidisciplinary Sciences

Template-free synthesis of porous carbon from triazine based polymers and their use in iodine adsorption and CO2 capture

Chan Yao et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Porous Organic Materials: Strategic Design and Structure-Function Correlation

Saikat Das et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Conjugated Ladder Polymers by a Cyclopentannulation Polymerization

Sambasiva R. Bheemireddy et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Engineering, Environmental

Treatment of nickel ions from contaminated water by magnetite based nanocomposite adsorbents: Effects of thermodynamic and kinetic parameters and modeling with Langmuir and Freundlich isotherms

Hadi Baseri et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Thiophene-based conjugated microporous polymers: synthesis, characterization and efficient gas storage

Chao-Jing Sun et al.

SCIENCE CHINA-CHEMISTRY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Dynamics of adsorption of Ni(II), Co(II) and Cu(II) from aqueous solution onto newly synthesized poly[N-(4-[4-(aminophenyl) methylphenylmethacrylamide])]

Atul Kumar Kushwaha et al.

ARABIAN JOURNAL OF CHEMISTRY (2017)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Synthesis and electronic properties of polycyclic aromatic hydrocarbons doped with phosphorus and sulfur

W. Delaunay et al.

DALTON TRANSACTIONS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

The removal of heavy metal ions from wastewater/aqueous solution using polypyrrole-based adsorbents: a review

Habibun Nabi Muhammad Ekramul Mahmud et al.

RSC ADVANCES (2016)

Add to Collection

Review Multidisciplinary Sciences

Opportunities and challenges for a sustainable energy future

Steven Chu et al.

NATURE (2012)

Add to Collection

Article Chemistry, Medicinal

Isoxazolidinyl polycyclic aromatic hydrocarbons as DNA-intercalating antitumor agents

Antonio Rescifina et al.

EUROPEAN JOURNAL OF MEDICINAL CHEMISTRY (2011)

Add to Collection

Article Engineering, Chemical

Adsorption of copper(II), nickel(II) and cobalt(II) ions from aqueous solution by methacrylic acid/acrylamide monomer mixture grafted poly(ethylene terephthalate) fiber

R Coskun et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2006)

Add to Collection

Article Engineering, Environmental

Hybrid flotation -: membrane filtration process for the removal of heavy metal ions from wastewater

C Blöcher et al.

WATER RESEARCH (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.