☆ 4.7 Article

Bond Strength of Reline Materials to 3D-Printed Provisional Crown Resins

POLYMERS (2023)

Related references

Note: Only part of the references are listed.

Review Chemistry, Multidisciplinary

Effect of 3D Printing Parameters on the Fatigue Properties of Parts Manufactured by Fused Filament Fabrication: A Review

Hamed Bakhtiari et al.

Summary: The advancement in 3D printing techniques has made it possible to use additively manufactured parts as final products in various industries. However, these parts have a higher susceptibility to failure when subjected to fatigue loading due to their layer-by-layer nature. This review discusses the influence of 3D printing parameters on the fatigue properties of parts manufactured by fused filament fabrication (FFF) and provides suggestions for future research. The results show that certain printing parameters, such as infill patterns and layer height, can significantly affect the fatigue strength of the printed parts under different loading conditions.

APPLIED SCIENCES-BASEL (2023)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Bond strength between temporary 3D printable resin and conventional resin composite: influence of cleaning methods and air-abrasion parameters

Valerie Lankes et al.

Summary: This study investigated the influence of different cleaning methods, air-abrasion parameters, and aging on the shear bond strength (SBS) and tensile bond strength (TBS) of 3D resin luted to composite resin. The results showed that pretreatment with centrifugation and air-abrasion at 0.4 MPa had the highest bond strength values.

CLINICAL ORAL INVESTIGATIONS (2023)

Add to Collection

Article Chemistry, Physical

Mechanical Properties, Cytotoxicity, and Fluoride Ion Release Capacity of Bioactive Glass-Modified Methacrylate Resin Used in Three-Dimensional Printing Technology

Zbigniew Raszewski et al.

Summary: This study evaluated the mechanical properties, cytotoxicity, and fluoride ion release capacity of 3D-printed dental resins modified with bioactive glass. The modified resins showed desirable bioactive properties and the potential ability to release fluoride ions in the oral cavity environment. However, there was a mild decrease in physical properties and mild cytotoxicity with direct contact with human cells.

MATERIALS (2022)

Add to Collection

Article Engineering, Biomedical

Temporary materials used in prosthodontics: The effect of composition, fabrication mode, and aging on mechanical properties

Edmara T. P. Bergamo et al.

Summary: This study evaluated the effect of composition, fabrication mode, and thermal cycling on the mechanical properties of different polymeric systems used for temporary dental prostheses. The results showed that the composition and fabrication mode, as well as thermal cycling, significantly influenced the flexural strength and elastic modulus of the polymeric systems.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)

Add to Collection

Review Chemistry, Physical

Aspects and Principles of Material Connections in Restorative Dentistry-A Comprehensive Review

Zbigniew Raszewski et al.

Summary: This literature review presents various methods for joining dental composites with different materials, including chemical methods and physical approaches. It covers articles published from 2012 to 2022 in English journals indexed in the PubMed database, focusing on connecting dental composites with ceramics, metals, and other composite materials. The review discusses critical steps in joint preparation, such as surface cleaning, primer application for forming chemical bonds between different materials, and the use of new composite materials.

MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Resolving nanoscopic structuring and interfacial THz dynamics in setting cements

Fu V. Song et al.

Summary: The setting dynamics of two commercial cements were studied using non-destructive THz spectroscopy and neutron scattering. Changes in interfacial particle dynamics and structural evolutions during setting were found to be correlated. The THz vibrations, especially at dynamically coordinated interfacial Al-atom pivots, played a crucial role in the setting process. These findings provide insights for developing nano-scopic strategies to optimize cement properties.

MATERIALS ADVANCES (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Shear bond strength of provisional repair materials bonded to 3D printed resin

Rami Albahri et al.

Summary: This in-vitro study aimed to determine the shear bond strength of various repair materials to 3D printed SLA resin. Results showed no statistically significant differences between testing groups, with Bis-GMA composite demonstrating the most predictability from the fractography analysis.

JOURNAL OF DENTAL SCIENCES (2021)

Add to Collection

Review Engineering, Biomedical

3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications

Danial Khorsandi et al.

Summary: 3D and 4D printing technologies enable precise and expedited manufacturing of a wide range of objects, including those used in dentistry such as surgical drill guides, crowns, bridges, and implants. This review highlights the available 3D printing technologies and materials in dentistry, as well as recent applications to show the progress in this field.

ACTA BIOMATERIALIA (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Temporary 3D-Printed Fixed Dental Prosthesis Materials: Impact of Postprinting Cleaning Methods on Degree of Conversion and Surface and Mechanical Properties

Johannes Mayer et al.

Summary: The study investigated the influence of different cleaning methods on additively manufactured fixed dental prostheses for long-term temporary use. The results showed that the use of centrifugal force and Yellow Magic resulted in the highest Martens parameter values and biaxial flexural strength.

INTERNATIONAL JOURNAL OF PROSTHODONTICS (2021)

Add to Collection

Review Medicine, General & Internal

3D Printing in Digital Prosthetic Dentistry: An Overview of Recent Developments in Additive Manufacturing

Josef Schweiger et al.

Summary: This article discusses the current applications of 3D printing technology in dental laboratories and practices, as well as evaluates future perspectives. It also examines the ongoing viability of traditional dental laboratory services and manufacturing processes, highlighting the expertise needed for digital additive manufacturing of dental restorations.

JOURNAL OF CLINICAL MEDICINE (2021)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations

Marta Revilla-Leon et al.

JOURNAL OF ESTHETIC AND RESTORATIVE DENTISTRY (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Influence of surface treatments and repair materials on the shear bond strength of CAD/CAM provisional restorations

Ki-Won Jeong et al.

JOURNAL OF ADVANCED PROSTHODONTICS (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

3D printed versus conventionally cured provisional crown and bridge dental materials

Anthony Tahayeri et al.

DENTAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Wear Resistance of 3D Printing Resin Material Opposing Zirconia and Metal Antagonists

Ji-Man Park et al.

MATERIALS (2018)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Trends in Computer-Aided Manufacturing in Prosthodontics: A Review of the Available Streams

Jaafar Abduo et al.

INTERNATIONAL JOURNAL OF DENTISTRY (2014)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

The Effect of Surface Roughness on Repair Bond Strength of Light-Curing Composite Resin to Polymer Composite Substrate

Timo T. Kallio et al.

OPEN DENTISTRY JOURNAL (2013)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Adhesion to tooth structure: A critical review of micro bond strength test methods

Steve Armstrong et al.

DENTAL MATERIALS (2010)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Shear bond strength of provisional restoration materials repaired with light-cured resins

H-L Chen et al.

OPERATIVE DENTISTRY (2008)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Exotherm behavior of the polymer-based provisional crown and fixed partial denture materials

SH Kim et al.

DENTAL MATERIALS (2004)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Method for developing an optimal emergence profile using heat-polymerized provisional restorations for single-tooth implant-supported restorations

DCT Macintosh et al.

JOURNAL OF PROSTHETIC DENTISTRY (2004)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

A review of selected dental literature on contemporary provisional fixed prosthodontic treatment: Report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics

DR Burns et al.

JOURNAL OF PROSTHETIC DENTISTRY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.