Related references
Note: Only part of the references are listed.
Article
Engineering, Electrical & Electronic
Ja Hoon Koo et al.
Summary: A thin and stretchable polymer layer fabricated by vacuum deposition can be used as the gate dielectric in stretchy carbon-nanotube-based transistors and circuits, which can function at 40% strain. This research is of great significance and is rated 9 out of 10 in importance.
NATURE ELECTRONICS
(2023)
Article
Thermodynamics
Rui Zhang et al.
Summary: This paper develops a coupled thermal-mechanical simulation model to investigate the thermophysical properties of liquid metal elastomer composites (LMECs). The simulation results show that a large strain can enhance the effective thermal conductivity of LMECs, and the deformation of liquid metal significantly improves their thermal conductivity compared to copper composites. This work provides simulation support for the application of LMECs in the fields of biomedicine, thermal management, and flexible electronics.
CASE STUDIES IN THERMAL ENGINEERING
(2023)
Article
Chemistry, Analytical
Si Wu et al.
Article
Nanoscience & Nanotechnology
Jincong Chen et al.
Summary: In this study, a multifunctional bilayer composite actuator with controllable structures and high photothermal conversion efficiency was designed and prepared. The actuator, consisting of a graphene/polydimethylsiloxane (PDMS) composite layer and a PDMS layer, exhibited good hydrophobicity, high photothermal conversion performance, and rapid photo-response capability. By thermal regulation, ultraviolet laser cutting, and assembly, the actuator achieved shape programmable configuration in three-dimensional directions. Bionic crawling robots achieved a crawling speed of 0.065mm/s, and liquid tracking robots achieved various complex motions. This work provides a simple and effective method for the preparation and realization of multifunctional actuators based on graphene composite materials.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Review
Engineering, Biomedical
Sen Chen et al.
Summary: This review provides a comprehensive summary of the current knowledge on liquid metal toxicology and biocompatibility, focusing on Ga and Bi-based liquid metals. It discusses the challenges and suggests further investigation to clarify toxicological mechanisms and strategies to avoid adverse effects. The review aims to promote the healthy and sustainable development of liquid metal-based materials, particularly in healthcare applications.
ADVANCED HEALTHCARE MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Seungseok Han et al.
Summary: A novel stretchable film based on an over-layered liquid-metal network is proposed. An intentionally oxidized interfacial layer enables the formation of uninterrupted indium and gallium nanoclusters, creating additional electrical pathways under mechanical deformation. The films exhibit gigantic negative piezoresistivity (G-NPR), reducing resistance by up to 85% during the initial 50% stretching. The rupture of metal oxides allows the formation of liquid eutectic gallium-indium (EGaIn) and the connection of the over-layered networks to build new electrical paths.
ADVANCED MATERIALS
(2023)
Review
Polymer Science
Jiahao Yang et al.
Summary: This review discusses the design criteria and functionalities of hydrogel bio-adhesives for wound healing and comprehensively explores recent advances in polysaccharide-based multifunctional hydrogel bio-adhesives. Polysaccharides such as chitosan, hyaluronic acid, alginate, cellulose, dextran, konjac glucomannan, chondroitin sulfate, and others are discussed. The current challenges and future research directions of polysaccharide-based hydrogel bio-adhesives for wound healing are proposed.
Article
Engineering, Electrical & Electronic
Heewon Choi et al.
Summary: This study presents a bioelectronic patch that can adhere to tissue instantly and conformably for precise cardiac monitoring. The patch is composed of an ionically conductive tissue adhesive, a viscoelastic networked film, and a fatigue-resistant conducting composite. It offers conformable tissue adhesion in less than 0.5 s without external stimuli and can be used for long-term electrocardiogram signal measurement and spatiotemporal mapping in a myocardial ischemia reperfusion model.
NATURE ELECTRONICS
(2023)
Article
Chemistry, Analytical
Yanru Bai et al.
Summary: Gesture recognition is crucial for intelligent control and human-computer interaction. A new type of stretchable EMG electrode based on liquid metal nanoparticles has been developed, which conforms well to the mechanical properties of human skin. This electrode has the advantages of low cost, great stretch ability, and high accuracy in collecting EMG signals generated by hand movements.
Article
Chemistry, Multidisciplinary
Yeonsun Choi et al.
Summary: This article reports a molecular design method for creating an instantaneous polymeric adhesive with high strain tolerance. The adhesive is composed of two biocompatible and eco-friendly polymers, which form densely assembled networks via dynamic and reversible hydrogen bonds. The strain-tolerant adhesion of the polymeric adhesive allows for precise control and manipulation in underwater human-machine interfaces.
Article
Chemistry, Multidisciplinary
Gang Li et al.
Summary: Conducting polymer hydrogels have great potential in soft bioelectronics due to their tissue-like mechanical properties and electrical interaction with tissues. However, balancing electrical conductivity and mechanical stretchability is challenging. This study addresses the issue by concentrating a poorly crosslinked precursor hydrogel with a high content ratio of the conducting polymer, resulting in a densified double-network hydrogel with high electrical conductivity and large fracture strain. The hydrogel also exhibits high biocompatibility, tissue-like softness, low swelling ratio, and desired electrochemical properties for bioelectronics. Surface grafting is used to form an adhesive layer on the conducting hydrogel, enabling robust bonding on tissues. The proposed hydrogel is applied for physiological signal recording and electrical stimulation with an in vivo rat model, showing high quality and reliability. This method provides an ideal strategy for rapid and reliable tissue-device integration with high-quality electrical communications.
ADVANCED MATERIALS
(2022)
Review
Chemistry, Multidisciplinary
Wenzheng Heng et al.
Summary: Medical robots play a crucial role in non-pharmaceutical treatment of disabilities, and flexible human-machine interfaces have emerged as a key technology in this field. They offer high biocompatibility, functionality, conformability, and cost-effectiveness, enabling better rehabilitation feedback and user experience.
ADVANCED MATERIALS
(2022)
Article
Biophysics
Sanghyuk Yoon et al.
Summary: A novel multifunctional hybrid skin patch was developed for sweat glucose level analysis and simultaneous ECG monitoring, with pH and temperature sensors integrated for biosensor calibration. The fabricated patch exhibited excellent linearity and sensitivity for glucose detection, as well as reliable monitoring of ECG waveforms. By integrating all sensors onto a single patch, it provides advanced glycemic control and continuous ECG monitoring for smart management of chronic diseases and healthcare applications.
BIOSENSORS & BIOELECTRONICS
(2022)
Article
Multidisciplinary Sciences
Yecheng Wang et al.
Summary: This article presents a stretchable and self-powered temperature sensing method that utilizes the charge imbalance between ions and electrons to detect temperature changes. It demonstrates high sensitivity and fast response time.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
(2022)
Review
Chemistry, Multidisciplinary
Xiaowei Liu et al.
Summary: Hydrogels are utilized in tissue repair, artificial skin, and biological electronics due to their extracellular features. To prevent detachment, high interactive energy and fracture toughness are required, along with specific tactics based on substrates' properties.
ADVANCED MATERIALS INTERFACES
(2022)
Review
Chemistry, Multidisciplinary
Yinghong Wu et al.
Summary: This article provides an overview of the advantages, types, advanced functions, enhanced output performance, as well as flexible and wearable applications of hydrogel-based TENGs (H-TENGs). It is a valuable reference for researchers and engineers in the field. Furthermore, the challenges and future prospects of H-TENGs are also discussed.
Article
Chemistry, Analytical
Duc Tri Phan et al.
Summary: A wireless and flexible biosensor patch for continuous monitoring of physiological signals in healthcare applications is proposed. The patch is designed with high mechanical stretchability and compatibility for reliable attachment to the skin surface. An optimized deep learning architecture is introduced for non-invasive continuous blood pressure monitoring.
Article
Nanoscience & Nanotechnology
Zhihao He et al.
Summary: A novel liquid metal composite electrode was developed in this study, where eutectic gallium-indium alloy was applied to the platinum electrode of IPMC. This new electrode improves the driving force and fatigue life, showing great potential for various bionic applications.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Review
Chemistry, Multidisciplinary
Massimo Mariello et al.
Summary: This article reviews recent advances in encapsulation technologies for bioelectronic implantable systems, with a focus on thin-film encapsulation as a flexible alternative. The article also discusses quantitative characterization methods of TFE and its integration into functional bioelectronic interfaces.
ADVANCED MATERIALS
(2022)
Review
Biochemistry & Molecular Biology
Wei Peng et al.
Summary: This review summarizes the recent progress in skin repair and wound dressing regeneration biomaterials research, including clinical research, classification, composition, performance, and biological function characteristics of different biomaterials. The future development direction is also discussed.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
(2022)
Article
Nanoscience & Nanotechnology
Jun-Kyul Song et al.
Summary: This study reports the rational material design and device fabrication strategies for an intrinsically stretchable, multispectral, and multiplexed phototransistor array. The unique spatial distribution of size-tuned quantum dots within an elastomeric matrix and a semiconducting polymer enables the shape-tunable and colour-sensitive capabilities of the array. Compensation of optical aberrations and noises is achieved using a deep neural network algorithm, allowing precise detection of specific colour patterns under different curved states. In conclusion, this research realizes shape-tunable and colour-sensitive phototransistor arrays using intrinsically stretchable quantum-dot-based semiconducting nanocomposites.
NATURE NANOTECHNOLOGY
(2022)
Article
Polymer Science
Yewon Kim et al.
Summary: Liquid metals have both electrical conductivity and the ability to exist in a liquid state at room temperature, making them suitable for use as conductive liquid-state fillers in soft electronics. This study demonstrates the fabrication of a composite material using Eutectic Gallium Indium (EGaIn) mixed with Styrene-Ethylene-Butylene-Styrene (SEBS) dissolved in toluene, which exhibits high conductivity, excellent electrical durability, and similar modulus to bare SEBS. An electrode coated with alginate hydrogel was fabricated using this composite, showing promising performance in bioelectronics.
Review
Polymer Science
Pavel Melnikov et al.
Summary: Polymers can be improved by creating composites and nanocomposites, which involve dispersing nanoscale particles in a polymer matrix. These materials have various applications, such as optical sensors and biosensors.
Article
Materials Science, Multidisciplinary
Shilei Dai et al.
Summary: This study reports an intrinsically stretchable electrochemical transistor-based neuromorphic device that provides a large number of states, excellent switching endurance, and good state retention. It also demonstrates the feasibility of performing vector-matrix multiplication even under high strain and achieving high accuracy in AI-based classification of health signals, minimally affected by the stretched state of the neuromorphic hardware.
Review
Chemistry, Multidisciplinary
Yuanjing Lin et al.
Summary: The increasing demand for wearable and portable healthcare devices, coupled with advancements in wearable biosensors, allows for reliable noninvasive monitoring. Recent research in personalized healthcare body computing systems is presented, along with key considerations and case studies. Key factors for wearable sensors, data analysis considerations, and challenges for making these systems reliable, practical, and ubiquitous are discussed.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Biophysics
Farnaz Khoshmanesh et al.
Summary: Wearable sensors have evolved into highly integrated, compact, and versatile devices that can continuously monitor body signals and interact with the surrounding environment or equipment. Future research directions include personalized health monitoring, achieving tactile sensation and pain perception, and assistive technologies for disabled individuals.
BIOSENSORS & BIOELECTRONICS
(2021)
Article
Chemistry, Physical
Kang Hyuck Lee et al.
Summary: MXene-based hydrogels have unique properties that allow for tuning of ionic and electronic transport through strain and pH modulation. This study demonstrates the development of a muscle fatigue sensor using MXene-based hydrogel, which can provide real-time monitoring during exercise and be integrated with a smartphone for portable or wearable digital readout. The concept can be extended to various fields requiring accurate analysis of changing physical and chemical conditions, including physiological changes in the human body.
Article
Polymer Science
Kyoungryong Kim et al.
Summary: A stabilization strategy for alginate hydrogel fibers through mussel-inspired catechol chemistry was reported, resulting in mechanically strong 3D constructs. Wet-spinning of catechol-tethered alginate hydrogel fibers enabled the enhancement of tensile strength of a single fiber through covalent crosslinking. The 'gluing' capability of catechol stabilized the interface among the fibers, retaining the shape fidelity of the 3D constructs and encapsulating cell density during culture.
Article
Chemistry, Multidisciplinary
Krzysztof Strzecha et al.
Summary: This work focuses on electromyography (EMG) signal processing for the diagnosis and therapy of different muscles. An original algorithm is proposed to clean raw EMG measurements and enable precise muscle activity measurements with minimal loss of diagnostic content.
APPLIED SCIENCES-BASEL
(2021)
Article
Chemistry, Multidisciplinary
Qiuna Zhuang et al.
Summary: This study presents a novel LM-superlyophilic fibrous thin-film scaffold for constructing highly stretchable and wearable electronic devices with superior conductivity and minimal resistance increase under large tensile strains. The LM-infused scaffold demonstrates remarkable uptake of LM and conductivity enhancement properties when stretched, resulting in an ultrahigh conductivity of 155,900 S cm(-1) and only a 2.5-fold increase in resistance at 2,500% strain.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Review
Chemistry, Multidisciplinary
Jianwen Chen et al.
Summary: Inspired by human skin, electronic skins (e-skins) utilize flexible sensors and delicate circuits to mimic the sensing functions of human skin, including strain, pressure, shear force, temperature, and humidity sensing abilities, as well as self-healing capabilities. This review summarizes strategies to achieve versatile functionalities of natural skin-like e-skins, outlines representative examples of high-performance e-skins and their applications, and provides an outlook for the future of e-skins.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Zequn Shen et al.
Summary: A highly sensitive and robust soft touch skin was developed using ultracapacitive sensing combining ionic hydrogels with commercially available conductive fabrics. Prototypical designs of capacitive sensors with high sensitivity, broad pressure detection range, ultrahigh baseline capacitance, fast response time, and good repeatability were introduced. Ionogel skins were further developed with cutaneous mechanoreceptors capable of monitoring physiological signals and shape detection, showcasing potential applications in next-generation human-in-the-loop robotic systems with tactile sensing.
ADVANCED MATERIALS
(2021)
Review
Chemistry, Physical
Piotr Stachak et al.
Summary: Non-isocyanate polyurethanes (NIPUs) are a new class of environmentally friendly polymeric materials, synthesized through the polyaddition of cyclic carbonates and polyfunctional amines, offering excellent chemical, mechanical, and thermal stability properties. NIPUs also feature tunable properties and the elimination of hazardous chemical compounds during synthesis. While there have been numerous studies on the synthesis and properties of NIPUs, systematic information on the fabrication and processing of NIPU composites is currently lacking.
Article
Automation & Control Systems
Yuanzhao Wu et al.
Summary: The flexible strain sensor, based on liquid metal technology, has a broad strain sensing range and ultralow detection limit, efficiently detecting human gestures and showing great potential in the fields of human health monitoring and human-machine interface.
ADVANCED INTELLIGENT SYSTEMS
(2021)
Review
Materials Science, Biomaterials
Yating Yi et al.
Summary: Hydrogels made of biocompatible polymers with a three-dimensional hydrophilic network are commonly used in tissue engineering, but lack of self-adhesive properties hinders integration with surrounding tissues. Self-adhesive hydrogels, a new class of hydrogels, offer reliable adhesion and improve repair efficiency by easily integrating into tissues.
JOURNAL OF MATERIALS CHEMISTRY B
(2021)
Article
Engineering, Electrical & Electronic
Kanhao Zhu et al.
Summary: Human hands are the most dexterous parts of the human body, with finger movements primarily controlled by specific forearm muscles; this study introduces customized four-channel electrode arrays that can cover more muscles and record high-quality electromyography signals.
ACS APPLIED ELECTRONIC MATERIALS
(2021)
Review
Engineering, Electrical & Electronic
Won Bae Han et al.
Summary: Recent advances in materials and device engineering have led to the development of ultrathin, soft, lightweight, and skin-conformable wearable/implantable electronic systems, allowing precise and long-term monitoring of biological signals while reducing interference from daily body motions. This soft and flexible platform offers opportunities for recording and analyzing diverse parameters for clinical use in disease prevention and management. Combination with bioresorbable and self-healing properties can enhance device biosafety/reliability and enable unprecedented applications in various fields.
ACS APPLIED ELECTRONIC MATERIALS
(2021)
Review
Materials Science, Textiles
Li Guo et al.
TEXTILE RESEARCH JOURNAL
(2020)
Review
Materials Science, Multidisciplinary
Pengju Li et al.
ADVANCED MATERIALS TECHNOLOGIES
(2020)
Article
Robotics
You Yu et al.
Article
Chemistry, Multidisciplinary
Jung-Eun Park et al.
ADVANCED MATERIALS
(2020)
Article
Engineering, Electrical & Electronic
Ming Wang et al.
NATURE ELECTRONICS
(2020)
Article
Chemistry, Physical
Cheng-Zhou Hang et al.
Article
Engineering, Electrical & Electronic
Manuel Reis Carneiro et al.
IEEE SENSORS JOURNAL
(2020)
Article
Chemistry, Multidisciplinary
Lei Mou et al.
Article
Polymer Science
Arindam Banerjee et al.
JOURNAL OF APPLIED POLYMER SCIENCE
(2019)
Review
Polymer Science
Sher Ling Lee et al.
Article
Engineering, Biomedical
Limei Tian et al.
NATURE BIOMEDICAL ENGINEERING
(2019)
Article
Chemistry, Multidisciplinary
Sibo Cheng et al.
ADVANCED MATERIALS INTERFACES
(2019)
Review
Chemistry, Multidisciplinary
Yongseok Joseph Hong et al.
ADVANCED FUNCTIONAL MATERIALS
(2019)
Article
Chemistry, Multidisciplinary
Ravi Tutika et al.
ADVANCED FUNCTIONAL MATERIALS
(2018)
Review
Chemistry, Multidisciplinary
Juan Zhao et al.
Article
Nanoscience & Nanotechnology
Suji Choi et al.
NATURE NANOTECHNOLOGY
(2018)
Review
Chemistry, Multidisciplinary
Jing Fu et al.
NEW JOURNAL OF CHEMISTRY
(2018)
Article
Nanoscience & Nanotechnology
Wei-Peng Chen et al.
ACS APPLIED MATERIALS & INTERFACES
(2018)
Review
Biotechnology & Applied Microbiology
Sheva Naahidi et al.
BIOTECHNOLOGY ADVANCES
(2017)
Article
Chemistry, Multidisciplinary
Ge Shi et al.
ADVANCED FUNCTIONAL MATERIALS
(2016)
Review
Engineering, Electrical & Electronic
Jeff Kilby et al.
IEEE SENSORS JOURNAL
(2016)
Review
Polymer Science
Ayesha Kausar et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING
(2016)
Article
Multidisciplinary Sciences
Chong-Chan Kim et al.
Article
Multidisciplinary Sciences
Abu Bin Imran et al.
NATURE COMMUNICATIONS
(2014)
Article
Multidisciplinary Sciences
Gregor Schwartz et al.
NATURE COMMUNICATIONS
(2013)
Review
Chemistry, Multidisciplinary
Xiao Huang et al.
CHEMICAL SOCIETY REVIEWS
(2012)
Article
Chemistry, Analytical
Xueyan Tang et al.
Article
Biochemical Research Methods
MBI Reaz et al.
BIOLOGICAL PROCEDURES ONLINE
(2006)
Article
Clinical Neurology
MJ Zwarts et al.
Article
Materials Science, Multidisciplinary
HB Huang et al.
