☆ 4.7 Review

Latest Advancements in the Development of High-Performance Lignin- and Tannin-Based Non-Isocyanate Polyurethane Adhesive for Wood Composites

POLYMERS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Applied

Epoxidation of limonene and pinenes by dimethyldioxirane in microemulsions

Yacoub Mahamat Ahmat et al.

Summary: This study investigates the epoxidation of hydrophobic terpenes, such as limonene and pinene, using dimethyldioxirane (DMDO) generated in-situ in a micro-emulsion system. The surfactant cetyltrimethylammonium hydrogen sulfate (CTAHS) is used to homogenize the terpenes in the aqueous reaction medium. The application of CTAHS as a surfactant significantly improves the epoxidation reaction, resulting in high yields of limonene dioxide and alpha-pinene oxide.

CATALYSIS TODAY (2023)

Add to Collection

Article Materials Science, Paper & Wood

Recent progress in ultra-low formaldehyde emitting adhesive systems and formaldehyde scavengers in wood-based panels: a review

Lubos Kristak et al.

Summary: This article reviews the current research status of low formaldehyde emission wood adhesives and formaldehyde scavengers, and discusses how to manufacture low-toxic, eco-friendly wood composites.

WOOD MATERIAL SCIENCE & ENGINEERING (2023)

Add to Collection

Review Polymer Science

Recent Progress of Non-Isocyanate Polyurethane Foam and Their Challenges

Said El Khezraji et al.

Summary: Polyurethane foams (PUFs) are widely used in various applications due to their excellent mechanical, chemical, and physical properties. The traditional synthesis of PUFs involves the use of toxic isocyanates, leading to a growing interest in cleaner synthesis routes for polyurethanes. This review focuses on the use of cyclic carbonates (CCs) and polyfunctional amines, either with an external blowing agent or by self-blowing, as promising alternatives to conventional PUFs synthesis. Different blowing agents, such as Poly(methylhydrogensiloxane) (PHMS) and liquid fluorohydrocarbons, are discussed for the preparation of isocyanate-free polyurethane foams (NIPUFs). The review also explores the preparation of NIPUFs using the self-blowing technique and various biologically derived NIPUFs.

POLYMERS (2023)

Add to Collection

Article Green & Sustainable Science & Technology

Chemical recycling ofa lignin-based non-isocyanate polyurethane foam

James Sternberg et al.

Summary: The plastic waste crisis requires new polymers designed for recycling. Lignin, found in woody biomass, is a promising biobased source due to its aromatic nature. However, the reactivity and heterogeneous structure of lignin pose challenges for its use in polymers and designing recycling solutions. A chemical recycling technique is demonstrated here to depolymerize lignin and produce a recycled precursor that can be reused in non-isocyanate polyurethane foams. The closed-loop recycling process of lignin-derived foam shows a pathway towards a circular economy.

NATURE SUSTAINABILITY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Isocyanate-free urethane vinyl ester resin: preparation, characterization and thermal and mechanical properties investigation

Soheila Ghasemi et al.

Summary: This study presents a method to synthesize UVER without using isocyanate, and confirms the structure and properties of the synthesized product. This method is beneficial in reducing environmental risks while maintaining the chemical resistance and mechanical properties of UVER.

CHEMICAL PAPERS (2023)

Add to Collection

Article Agricultural Engineering

Fabrication of ultraviolet resistant and anti-bacterial non-isocyanate polyurethanes using the oligomers from the reductive catalytic fractionated lignin oil

Yumiao Yang et al.

INDUSTRIAL CROPS AND PRODUCTS (2023)

Add to Collection

Article Thermodynamics

Pyrolysis and thermal degradation studies of non-isocyanate polyurethanes modified by polyhedral oligomeric silsesquioxanes

Artur Bukowczan et al.

Summary: This study investigates the thermal properties of non-isocyanate polyurethanes (NIPUs) synthesized by the poly-addition reaction of polyether diamine and five membered tri(cyclic carbonate) using a prepolymerization method. The NIPUs were further modified with trifunctional polyhedral oligomeric silsesquioxane (POSS) resulting in hybrid composite materials. The obtained materials were characterized using various techniques, and the results revealed the successful synthesis of NIPUs and their hybrids with POSS. The incorporation of POSS into the NIPU matrix improved thermal stability and reduced flammability, as evidenced by the results of thermogravimetric analysis, pyrolysis with gas chromatography and mass spectrometry, and microscale combustion calorimetry.

THERMOCHIMICA ACTA (2023)

Add to Collection

Article Chemistry, Physical

Ammonia versus Water Elimination in the Reaction of Diols with Urea under Metal Oxide Catalysis

Francesco Nocito et al.

Summary: This article presents interesting reactions between urea and biosourced diols, driven by cheap catalysts, which result in the elimination of ammonia and water. Various compounds, including cyclic carbonates, linear mono- and diurethanes, cyclic urethanes, and oligomeric urethanes, can be synthesized under mild conditions. ZnO and CeO2, as catalysts, exhibit different behavior in promoting ammonia or water elimination, with CeO2 being recoverable and reusable. CeO2 also facilitates the formation of oligo-urethanes through sequential diol-urea coupling.

ACS CATALYSIS (2023)

Add to Collection

Article Polymer Science

Eco-Friendly Tannin-Based Non-Isocyanate Polyurethane Resins for the Modification of Ramie (Boehmeria nivea L.) Fibers

Manggar Arum Aristri et al.

Summary: This study developed tannin-based non-isocyanate polyurethane (tannin-Bio-NIPU) and tannin-based polyurethane (tannin-Bio-PU) resins for the impregnation of ramie fibers and investigated their mechanical and thermal properties. The impregnation process improved the thermal stability and mechanical strength of the ramie fibers.

POLYMERS (2023)

Add to Collection

Article Engineering, Biomedical

Fabrication and characterization of photosensitive non-isocyanate polyurethane acrylate resin for 3D printing of customized biocompatible orthopedic surgical guides

Yan Wang et al.

Summary: This study developed a non-isocyanate polyurethane acrylate (NIPUA) photosensitive resin with excellent biocompatibility and mechanical properties for 3D-printed orthopedic surgical guides. Compared with commercial resins, NIPUA showed superior thermal stability, hemocompatibility, and biocompatibility towards bone cells, muscle cells, and macrophages. It also exhibited downregulation of cell death and cell cycle disruption-related genes, as well as upregulation of autophagy and anti-tumor activity-related genes.

INTERNATIONAL JOURNAL OF BIOPRINTING (2023)

Add to Collection

Review Green & Sustainable Science & Technology

Valorization of lignin for renewable non-isocyanate polyurethanes: a state-of-the-art review

Y. Yang et al.

Summary: This review focuses on utilizing functionalized lignin as a precursor for the production of eco-friendly and non-hazardous non-isocyanate polyurethanes (NIPUs) as alternatives to toxic diisocyanate-based PUs. It summarizes the chemical structure, fractionation processes, and functionalization strategies of lignin, as well as the current trends in synthesizing NIPUs using lignin derivatives. The potential applications of lignin-based NIPUs and the challenges in commercialization are also highlighted in this review.

MATERIALS TODAY SUSTAINABILITY (2023)

Add to Collection

Article Agricultural Engineering

New kinds of lignin/non-isocyanate polyurethane hybrid polymers: Facile synthesis, smart properties and adhesive applications

Tonghe Zhang et al.

Summary: The development of non-isocyanate polyurethanes (NIPUs) has been driven by the increasing demand for less toxic and non-dangerous chemicals for material preparation. Lignin, a natural and sustainable polymer, has been used to replace petroleum-derived chemicals in the synthesis of NIPUs. This study successfully synthesized lignin/NIPU hybrid polymers (LNIPUs), which exhibited excellent mechanical and thermal performance, as well as smart properties such as shape memory, self-healing, and reprocessability. The LNIPUs also showed outstanding adhesive properties, with a maximum adhesive strength of 24.5 MPa when bonding aluminum plates.

INDUSTRIAL CROPS AND PRODUCTS (2023)

Add to Collection

Article Green & Sustainable Science & Technology

Development and Characterization of Eco-Friendly Non-Isocyanate Urethane Monomer from Jatropha curcas Oil for Wood Composite Applications

Samsul Bhakri et al.

Summary: The aim of this research was to evaluate the potential of using renewable natural feedstock, Jatropha curcas oil, for the synthesis of non-isocyanate polyurethane resin for wood composite applications. The results showed the successful synthesis of the urethane groups from the Jatropha curcas oil, and the potential applications of non-isocyanate polyurethane in wood composites were outlined.

JOURNAL OF RENEWABLE MATERIALS (2023)

Add to Collection

Article Engineering, Chemical

Low curing temperature tannin-based non-isocyanate polyurethane (NIPU) wood adhesives: Preparation and properties evaluation

Xinyi Chen et al.

Summary: The use of bio-sourced GDE as an enhancer in tannin-based NIPU adhesives has been shown to decrease curing temperature, improve bonding performance, and reduce emission of harmful substances, aligning with the requirements for a cleaner production process.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Tannin-based bio-adhesives for the wood panel industry as sustainable alternatives to petrochemical resins

Ana Arias et al.

Summary: This study focuses on five alternatives for tannin-based adhesives, using modeling and simulation tools for conceptual design and life cycle assessment methodology for identifying environmental impacts. The results show that tannin NIPU bio-adhesive has the best environmental profile.

JOURNAL OF INDUSTRIAL ECOLOGY (2022)

Add to Collection

Article Chemistry, Applied

Non-isocyanate poly(acyl-urethane) obtained from urea and castor (Ricinus communis L.) oil

Jessica D. O. Rodrigues et al.

Summary: A new material PUAcyl, a non-isocyanate polyurethane synthesized from castor oil, urea, and BF3·OEt2, exhibits promising thermal stability and damping properties, suitable for daily applications such as acoustic coatings.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection

Review Polymer Science

The preparation of sorbitol and its application in polyurethane: a review

Jiacheng Xiang et al.

Summary: This paper discusses the importance of sorbitol as a raw material in bio-based polyurethanes, introduces the extraction methods of sorbitol, and its various uses in polyurethanes.

POLYMER BULLETIN (2022)

Add to Collection

Article Agricultural Engineering

Preparation and characterization of aminated co-solvent enhanced lignocellulosic fractionation lignin as a renewable building block for the synthesis of non-isocyanate polyurethanes

Xianzhi Meng et al.

Summary: Lignin, a major bioresource, has the potential to be used as a building block for biopolymer production. In this study, highly pure lignin extracted from co-solvent enhanced lignocellulosic fractionation was utilized to produce biobased non-isocyanate polyurethanes. The mechanical properties of these lignin based polyurethanes can be adjusted by modifying the lignin constituents. The addition of aminated lignin improves the thermal stability of the materials.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Article Polymer Science

Biobased non-isocyanate poly(carbonate-urethane)s of exceptional strength and flexibility

Dominik Wo Losz

Summary: Structure-property relationships of novel non-isocyanate poly(carbonate-urethane)s (NIPCU) based on renewable fatty diamine were studied. The addition of decamethylene carbonate units into the polyurethane structure improved the mechanical properties and solubility of the materials. The optimized molar ratio of urethane to carbonate groups resulted in the highest number-average molar mass and tensile strength.

POLYMER (2022)

Add to Collection

Article Polymer Science

Modification of Ramie Fiber via Impregnation with Low Viscosity Bio-Polyurethane Resins Derived from Lignin

Muhammad Adly Rahandi Lubis et al.

Summary: The aim of this study was to enhance the thermal and mechanical properties of ramie fiber through impregnation with low-viscosity lignin-based polyurethane (LPU) resins. The LPU resins were synthesized by dissolving lignin in 20% NaOH and adding polymeric 4,4-methane diphenyl diisocyanate (pMDI) with a mole ratio of 0.3 NCO/OH. Impregnation of ramie fiber with LPU resins led to the formation of urethane bonds, increasing thermal stability by an average of 6% and mechanical properties by an average of 100% compared to untreated fiber. The best results were obtained with LPU-ethyl acetate, with a residual weight of 22% and tensile strength of 648.7 MPa after 30 minutes of impregnation.

POLYMERS (2022)

Add to Collection

Article Chemistry, Applied

Environment-friendly UV-curable alkyd-based non-isocyanate urethanes

Ilknur Babahan-Bircan et al.

Summary: In this study, two non-isocyanate polyurethanes (NIPUs) were used as reactive diluents to prepare eco-friendly UV-curable alkyd-polyurethane coatings. The results showed that the amount of NIPUs had a significant effect on the hardness, adhesion, and thermal properties of the coatings, resulting in improved mechanical and thermal performance compared to the linseed-based alkyd resin.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2022)

Add to Collection

Article Polymer Science

Environmentally Friendly Synthesis of Urea-Free Poly(carbonate- urethane) Elastomers

Dominik Wolosz et al.

Summary: This work presents an eco-friendly synthetic pathway for the production of non-isocyanate poly(carbonate-urethane)s (NIPCUs) from carbon dioxide and organic carbonates. The obtained NIPCUs exhibit comparable mechanical properties to conventional polyurethane elastomers. The study also investigates the influence of polyurethane structure on the mechanical and thermal properties of the obtained polymers.

MACROMOLECULES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Accelerating the Curing of Hybrid Poly(Hydroxy Urethane)-Epox y Adhesives by the Thiol-Epoxy Chemistry

Alvaro Gomez-Lopez et al.

Summary: By combining NH2-PHU-NH2, epoxy resin, and thiol compound, high-shear strength PHU-epoxy hybrid adhesives can be developed and cured at room temperature in short times. These adhesives exhibit superior toughness without compromising lap-shear strength and shear resistance under load and temperature, making them suitable for high-demand applications in the automotive industry.

ACS APPLIED POLYMER MATERIALS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Non-Isocyanate Aliphatic-Aromatic Poly(carbonate-urethane)s-An Insight into Transurethanization Reactions and Structure-Property Relationships

Dominik Wolosz

Summary: This study provides insights into the transurethanization reactions in the synthesis of aliphatic-aromatic non-isocyanate poly(carbonate-urethane)s (NIPCUs) and their relationship with structure and properties. It was found that the alkyl chain length in 4,4 '-diphenylmethylene bis(hydroxyalkyl carbamate) (BHAC) plays a crucial role in these reactions. The presence of longer alkyl chains in the BHAC structure prevents side reactions.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Add to Collection

Article Polymer Science

The effect of polyhedral oligomeric silsesquioxane fillers in non-isocyanate polyurethane hybrid resins

Carlee M. MacInnis et al.

Summary: In this study, hybrid poly(hydroxyurethane) (PHU) materials with enhanced mechanical and thermal properties were prepared by incorporating polyhedral oligomeric silsesquioxane (POSS) into PHU prepolymers. The resultant films, modified with 3-Isocyanatopropyl(trimethoxy) silane (IPTMS), exhibited comparable performance to conventional polyurethane (PU) films, but with lower isocyanate usage. The addition of POSS improved the thermal degradation temperature and hydrophobicity of the films while maintaining high gel content and mechanical strength.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Review Chemistry, Physical

Lignin as a Renewable Building Block for Sustainable Polyurethanes

Fernanda Rosa Vieira et al.

Summary: Lignin, a byproduct of the pulp and paper industry, has the potential to be utilized in the development of polymeric materials such as polyurethanes. This review discusses the technologies to isolate lignin and convert it into a liquid polyol to produce bio-based polyurethanes, as well as strategies to replace isocyanates.

MATERIALS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Particleboard from agricultural biomass and recycled wood waste: a review

Seng Hua Lee et al.

Summary: The use of alternative raw materials such as agricultural biomass and recycled wood waste in particleboard production is a viable approach to meet the global demand for wood-based materials. This study reviews and evaluates the current state of particleboard production using environmentally-friendly agricultural biomass and recycled wood waste, and discusses the challenges and future potential of these materials.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Self-Blowing Non-Isocyanate Polyurethane Foams Based on Hydrolysable Tannins

Elham Azadeh et al.

Summary: Non-isocyanate polyurethane (NIPU) foams prepared using a hydrolysable tannin exhibit good compression strength, thermal resistance, and self-extinguishing properties. However, the addition of fire-retardant is necessary to improve fire resistance.

JOURNAL OF RENEWABLE MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Curing Kinetics of Tannin and Lignin Biobased Adhesives Determined by DSC and ABES

Jasa Sarazin et al.

Summary: This study compared the curing process of two biobased adhesives (TH and NIPU) with commercial UF adhesive. Changes in chemical structure and curing process were observed using FTIR, DSC, and ABES. UF adhesive showed the fastest curing, while NIPU adhesive had the slowest. Optimal pressing parameters were determined for each adhesive. There was a strong linear correlation between mechanical and chemical curing for UF and NIPU adhesives, but not for TH adhesive.

JOURNAL OF RENEWABLE MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Sustainable non-isocyanate polyurethanes bio-adhesives for engineered wood panels are revealed as promising candidates to move from formaldehyde-based alternatives

Ana Arias et al.

Summary: The development of eco-friendly wood adhesives is mainly driven by factors such as environmental sustainability, cost savings, recyclability, reusability, and health benefits compared to synthetic resins. By evaluating the technical performance of bio-based alternatives compared to formaldehyde-based resins, the environmental profiles of the products need to be assessed to determine the pros and cons. Results showed that OSL-NIPU and SPI-NIPU bio-adhesives have the best environmental profiles, potentially serving as substitutes for synthetic resins.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Feasibility Study of the Synthesis of Isocyanate-Free Polyurethanes from Catechin

Wissem Sahmim et al.

Summary: This study examines the feasibility of synthesizing non-isocyanate urethane using cyclic carbonate modified catechin and amine. The results show that carbamate can be successfully obtained through a four-step synthesis, opening up possibilities for further research on the synthesis of polyurethanes using catechin and condensed tannins as starting materials.

JOURNAL OF RENEWABLE MATERIALS (2022)

Add to Collection

Article Engineering, Chemical

Oxidized demethylated lignin as a bio-based adhesive for wood bonding

Xinyi Chen et al.

Summary: In this study, lignin was modified into a bio-based wood adhesive through demethylation and periodate oxidation, with the resulting adhesive characterized using various analytical methods. It was found that the addition of oxidant improved the bonding performance of lignin-based adhesives, with the optimal formulation being a 20% addition of NaIO4.

JOURNAL OF ADHESION (2021)

Add to Collection

Article Engineering, Chemical

Hydrolytic stability of polyurethane/polyhydroxyurethane hybrid adhesives

Soilikki Kotanen et al.

Summary: Polyurethane/polyhydroxyurethane (PU/PHU) hybrid materials show potential as alternatives to PU adhesives with good mechanical and adhesive properties, but are susceptible to water uptake leading to potential bond failure. After water immersion, cohesive strength of PU/PHU increases while adhesive strength decreases, requiring careful application design for optimal usage.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)

Add to Collection

Article Polymer Science

Non-Furanic Humins-Based Non-Isocyanate Polyurethane (NIPU) Thermoset Wood Adhesives

Xinyi Chen et al.

Summary: The study investigated the use of non-furanic commercial humins to prepare humin-based non-isocyanate polyurethane resins for wood panel adhesives, with tannin-humin NIPU resins showing better performance than pure humins resins.

POLYMERS (2021)

Add to Collection

Article Agricultural Engineering

Non-Isocyanate polyurethane from the extracted tannin of sumac leaves: Synthesis, characterization, and optimization of the reaction parameters

Masoumeh Gholami et al.

Summary: The study utilized tannin extracted from Sumac leaves to synthesize NIPUs, successfully optimizing reaction conditions and demonstrating the positive impact on the yield of polyurethane synthesis. The synthesized materials exhibited excellent thermal and mechanical properties, confirming the efficiency of the optimization process.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Article Chemistry, Physical

Enhancing Thermal and Mechanical Properties of Ramie Fiber via Impregnation by Lignin-Based Polyurethane Resin

Sucia Okta Handika et al.

Summary: Lignin isolated from black liquor was used to prepare Bio-PU resin, which was impregnated into ramie fiber to enhance its thermal and mechanical properties. The impregnation process resulted in weight gain and improved thermal and mechanical properties of the ramie fiber, making it suitable for a wider range of industrial applications.

MATERIALS (2021)

Add to Collection

Review Forestry

Bio-Based Polyurethane Resins Derived from Tannin: Source, Synthesis, Characterisation, and Application

Manggar Arum Aristri et al.

Summary: Tannins are soluble, astringent phenolic metabolites obtained from renewable natural resources and used in various industrial applications, including the production of tannin-based bio-polyurethanes to reduce dependency on harmful substances in the manufacturing process. Tannin-based bio-PUs show potential in improving the mechanical and thermal properties of polymer materials.

FORESTS (2021)

Add to Collection

Article Biotechnology & Applied Microbiology

Tannin: a new insight into a key product for the bioeconomy in forest regions

Mario Pagliaro et al.

Summary: This study explores the potential impact of tannin in the bioeconomy of forest regions, highlighting its key economic aspects, biological activity, and technological applications. With flourishing research showing new properties of tannin, there is a forecasted significant growth in demand in the near and mid-term future, which can be accelerated by new extraction and purification technologies for a circular economy based on tannin.

BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR (2021)

Add to Collection

Review Engineering, Chemical

A Brief Introduction to the Polyurethanes According to the Principles of Green Chemistry

Joanna Brzeska et al.

Summary: Polyurethanes are considered green products when they contain renewable additives and can be easily degraded and recycled. Efforts by scientists and technologists focus on creating ideal polyurethanes that adhere to principles of sustainable economy.

PROCESSES (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Developments in Lignin- and Tannin-Based Non-Isocyanate Polyurethane Resins for Wood Adhesives-A Review

Manggar Arum Aristri et al.

Summary: This review article summarizes the potential of using renewable resources like lignin and tannin for preparing non-isocyanate polyurethane (NIPU) wood adhesives. Research has shown that NIPUs based on lignin and tannin offer advantages such as improved strength, lower curing temperatures, shorter pressing times, and being isocyanate-free.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Polymer Science

Synthesis of novel plant oil-based isocyanate-free urethane coatings and study of their anti-corrosion properties

J. Pouladi et al.

Summary: A bio-resource resin was synthesized from linseed oil via epoxidation and carbonation, leading to the formation of non-isocyanate polyhydroxy-urethane networks for improved corrosion resistance on mild steel. Mechanical properties of coating samples were evaluated with different carbonation weight percentages, showing increased adhesion and hardness with higher carbonation conversion rates. EIS study indicated enhanced corrosion resistance initially with increasing carbonation percentage, with the 75% carbonated sample showing comparable performance to PU-based coatings.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Lignin-containing polyurethane elastomers with enhanced mechanical properties via hydrogen bond interactions

Nan Sun et al.

Summary: In this study, lignin-containing polyester polyol (LPES) and lignin-based polyurethane elastomer (LPUE) were successfully synthesized, and the effects of lignin on the structure and properties of elastomers were systematically studied. It was found that the introduction of lignin significantly enhanced the mechanical properties of the elastomers.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Recent developments in bio-based adhesives from renewable natural resources

Ana Arias et al.

Summary: This study aims to critically analyze the formulation of bio-based adhesives for wood panels, evaluate renewable material options, and identify challenges hindering further development. Methodi Ordinatio and VOSviewer software were used to identify high impact research and analyze keyword co-occurrence for discussion on research themes, types, publications, and journals. The review emphasizes the importance of methodological approaches and research designs for bio-adhesive production and suggests the need for techno-economic analysis and environmental assessment for market implementation.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Poly(hydroxyurethane) Adhesives and Coatings: State-of-the-Art and Future Directions

Alvaro Gomez-Lopez et al.

Summary: Polyurethane adhesives and coatings are widely used due to their excellent properties, but a major drawback lies in the use of toxic isocyanate-based starting materials. Non-isocyanate polyurethanes have emerged as greener alternatives, but industrial implementation is still at an early stage.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Soy Protein Isolate Non-Isocyanates Polyurethanes (NIPU) Wood Adhesives

Xinyi Chen et al.

Summary: In this study, soy-protein isolate was used to prepare non-isocyanate polyurethane thermosetting adhesives for wood panels. The adhesive showed the ability to form a hardened network that met dry strength standards but failed wet tests. The addition of glycerol diglycidyl ether improved wet test results but did not fully meet the standards requirements.

JOURNAL OF RENEWABLE MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Organosolv Lignin for Non-Isocyanate Based Polyurethanes (NIPU) as Wood Adhesive

Jasa Sarazin et al.

Summary: A non-isocyanate-based polyurethane (NIPU) wood adhesive was successfully produced from bio-sourced organosolv lignin, showing satisfactory mechanical properties at a hot-pressing temperature higher than 200 degrees Celsius.

JOURNAL OF RENEWABLE MATERIALS (2021)

Add to Collection

Article Forestry

Lignosulfonate-based polyurethane materials via cyclic carbonates: preparation and characterization

Vebi Mimini et al.

HOLZFORSCHUNG (2020)

Add to Collection

Review Engineering, Environmental

A Review of the Sustainable Approaches in the Production of Bio-based Polyurethanes and Their Applications in the Adhesive Field

Adrian Tenorio-Alfonso et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

Add to Collection

Article Polymer Science

Condensed tannin-glucose-based NIPU bio-foams of improved fire retardancy

Xinyi Chen et al.

POLYMER DEGRADATION AND STABILITY (2020)

Add to Collection

Article Polymer Science

Preparation and Characterization of Condensed Tannin Non-Isocyanate Polyurethane (NIPU) Rigid Foams by Ambient Temperature Blowing

Xinyi Chen et al.

POLYMERS (2020)

Add to Collection

Article Chemistry, Physical

Surface Properties of Poly(Hydroxyurethane)s Based on Five-Membered Bis-Cyclic Carbonate of Diglycidyl Ether of Bisphenol A

Mariusz Tryznowski et al.

MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Materials for the biorefinery: high bio-content, shape memory Kraft lignin-derived non-isocyanate polyurethane foams using a non-toxic protocol

James Sternberg et al.

GREEN CHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Studies on the effects of different multiwalled carbon nanotube functionalization techniques on the properties of bio-based hybrid non-isocyanate polyurethane

Xin He et al.

RSC ADVANCES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Waterborne isocyanate-free polyurethane epoxy hybrid coatings synthesized from sustainable fatty acid diamine

Cheng Zhang et al.

GREEN CHEMISTRY (2020)

Add to Collection

Article Chemistry, Applied

Catalyzed non-isocyanate polyurethane (NIPU) coatings from bio-based poly(cyclic carbonates)

Arvin Z. Yu et al.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2019)

Add to Collection

Article Chemistry, Applied

Synthesis and properties of cyclic carbonates and non-isocyanate polyurethanes under atmospheric pressure

Cai Wang et al.

PROGRESS IN ORGANIC COATINGS (2019)

Add to Collection

Article Forestry

Non-isocyanate polyurethane adhesive from sucrose used for particleboard

Xuedong Xi et al.

WOOD SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

From the Synthesis of Biobased Cyclic Carbonate to Polyhydroxyurethanes: A Promising Route towards Renewable Non-Isocyanate Polyurethanes

Camille Carre et al.

CHEMSUSCHEM (2019)

Add to Collection

Article Chemistry, Applied

Synthesis and evaluation of non-isocyanate polyurethane polyols for heat-cured thermoset coatings

H. R. Asemani et al.

PROGRESS IN ORGANIC COATINGS (2019)

Add to Collection

Review Polymer Science

Bio-based routes to synthesize cyclic carbonates and polyamines precursors of non-isocyanate polyurethanes: A review

Mehran Ghasemlou et al.

EUROPEAN POLYMER JOURNAL (2019)

Add to Collection

Article Polymer Science

Preparation and Evaluation of Glucose Based Non-Isocyanate Polyurethane Self-Blowing Rigid Foams

Xuedong Xi et al.

POLYMERS (2019)

Add to Collection

Review Environmental Sciences

Renewable natural resources as green alternative substrates to obtain bio-based non-isocyanate polyurethanes-review

Kamila Blazek et al.

CRITICAL REVIEWS IN ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Non-isocyanate polyurethane thermoset based on a bio-resourced star-shaped epoxy macromonomer in comparison with a cyclocarbonate fossil-based epoxy resin: A preliminary study on thermo-mechanical and antibacterial properties

Zeinab Karami et al.

JOURNAL OF CO2 UTILIZATION (2019)

Add to Collection

Review Green & Sustainable Science & Technology

Tannin-Based Biofoams-A Review

Antonio Pizzi

JOURNAL OF RENEWABLE MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

Aminolysis of cyclic-carbonate vegetable oils as a non-isocyanate route for the synthesis of polyurethane: A kinetic and thermal study

Wander Y. Perez-Sena et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Chemistry, Analytical

Evolution of sulfur during fast pyrolysis of sulfonated Kraft lignin

Tong Han et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2018)

Add to Collection

Article Polymer Science

Poly(hydroxyurethane)s with diethyl tartrate-based amide backbone by an isocyanate-free route: Use as adhesives

Mariusz Tryznowski et al.

POLYMER (2018)

Add to Collection

Article Chemistry, Applied

Synthesis and properties of ambient-curable non-isocyanate polyurethanes

Zhijun Wu et al.

PROGRESS IN ORGANIC COATINGS (2018)

Add to Collection

Article Thermodynamics

Tannic acid derived non-isocyanate polyurethane networks: Synthesis, curing kinetics, antioxidizing activity and cell viability

N. Esmaeili et al.

THERMOCHIMICA ACTA (2018)

Add to Collection

Article Multidisciplinary Sciences

From D-sorbitol to five-membered bis(cyclo-carbonate) as a platform molecule for the synthesis of different original biobased chemicals and polymers

Pierre Furtwengler et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Polymer Science

Isocyanate-Free Polyurethane Coatings and Adhesives from Mono- and Di-Saccharides

Xuedong Xi et al.

POLYMERS (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Polyurethanes from Kraft Lignin without Using Isocyanates

F. J. Santiago-Medina et al.

JOURNAL OF RENEWABLE MATERIALS (2018)

Add to Collection

Review Polymer Science

Renewable polyols for advanced polyurethane foams from diverse biomass resources

Pierre Furtwengler et al.

POLYMER CHEMISTRY (2018)

Add to Collection

Article Engineering, Chemical

Effects of NCO:OH ratio on the mechanical properties and chemical structure of Kraft lignin-based polyurethane adhesive

A. M. Nacas et al.

JOURNAL OF ADHESION (2017)

Add to Collection

Article Thermodynamics

Structure analysis and thermal degradation characteristics of bio-based poly(propylene succinate)s obtained by using different catalyst amounts

Paulina Parcheta et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Wood adhesive application of poly(hydroxyurethane)s synthesized with a dimethyl succinate-based amide backbone

M. Tryznowski et al.

RSC ADVANCES (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Isocyanate-Free Polyurethanes by Coreaction of Condensed Tannins with Aminated Tannins

M. Thebault et al.

JOURNAL OF RENEWABLE MATERIALS (2017)

Add to Collection

Article Polymer Science

Room temperature flexible isocyanate-free polyurethane foams

Adrien Cornille et al.

EUROPEAN POLYMER JOURNAL (2016)

Add to Collection

Article Polymer Science

Thermal characterization and crystallization kinetics of polyester polyols derived from adipic acid and bio-based succinic acid with 1,4-butanediol and 1,6-hexanediol

Alan K. Schrock et al.

POLYMER (2016)

Add to Collection

Article Polymer Science

Bio-based difuranic polyol monomers and their derived linear and cross-linked polyurethanes

Zehuai Mou et al.

POLYMER CHEMISTRY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Polyesters and Poly(ester-urethane)s from Biobased Difuranic Polyols

Zehuai Mou et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)

Add to Collection

Article Polymer Science

A new way of creating cellular polyurethane materials: NIPU foams

Adrien Cornille et al.

EUROPEAN POLYMER JOURNAL (2015)

Add to Collection

Article Polymer Science

Green polyurethane from lignin and soybean oil through non-isocyanate reactions

Albert Lee et al.

EUROPEAN POLYMER JOURNAL (2015)

Add to Collection

Article Polymer Science

Isocyanate free condensed tannin-based polyurethanes

Marion Thebault et al.

EUROPEAN POLYMER JOURNAL (2015)

Add to Collection

Article Biochemical Research Methods

Determination of putrescine, cadaverine, spermidine and spermine in different chemical matrices by high performance liquid chromatography-electrospray ionization-ion trap tandem mass spectrometry (HPLC-ESI-ITMS/MS)

Alan Alexander Gonzalez Ibarra et al.

JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES (2015)

Add to Collection

Article Polymer Science

Bio-based alternatives in the synthesis of aliphatic-aromatic polyesters dedicated to biodegradable film applications

Nicolas Jacquel et al.

POLYMER (2015)

Add to Collection

Review Polymer Science

Biobased polyesters and other polymers from 2,5-furandicarboxylic acid: a tribute to furan excellency

Andreia F. Sousa et al.

POLYMER CHEMISTRY (2015)

Add to Collection

Article Polymer Science

Reactivity of secondary amines for the synthesis of non-isocyanate polyurethanes

Fatoumata Camara et al.

EUROPEAN POLYMER JOURNAL (2014)

Add to Collection

Article Agricultural Engineering

Polyurethanes from hydrolysable tannins obtained without using isocyanates

M. Thebault et al.

INDUSTRIAL CROPS AND PRODUCTS (2014)

Add to Collection

Article Polymer Science

An Efficient Nonisocyanate Route to Polyurethanes via Thiol-Ene Self-Addition

Mariola Calle et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2014)

Add to Collection

Article Polymer Science

Toughening of poly(propylene carbonate) using rubbery non-isocyanate polyurethane: Transition from brittle to marginally tough

Guanjie Ren et al.

POLYMER (2014)

Add to Collection

Review Chemistry, Multidisciplinary

On the Versatility of Urethane/Urea Bonds: Reversibility, Blocked Isocyanate, and Non-isocyanate Polyurethane

Etienne Delebecq et al.

CHEMICAL REVIEWS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Glycerol-, pentaerythritol- and trimethylolpropane-based polyurethanes and their cellulose carbonate composites prepared via the non-isocyanate route with catalytic carbon dioxide fixation

Maria Fleischer et al.

GREEN CHEMISTRY (2013)

Add to Collection

Review Chemistry, Applied

Effect of incorporation of surface treated zinc oxide on non-isocyanate polyurethane based nano-composite coatings

Mukesh Kathalewar et al.

PROGRESS IN ORGANIC COATINGS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Development of lignin-based polyurethane thermoplastics

Tomonori Saito et al.

RSC ADVANCES (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Cyclic limonene dicarbonate as a new monomer for non-isocyanate oligo- and polyurethanes (NIPU) based upon terpenes

Moritz Baehr et al.

GREEN CHEMISTRY (2012)

Add to Collection

Review Chemistry, Applied

Preparation and characterization of phosphine oxide based polyurethane/silica nanocomposite via non-isocyanate route

Zuhal Hosgor et al.

PROGRESS IN ORGANIC COATINGS (2010)

Add to Collection

Review Engineering, Chemical

An integrated process to produce vanillin and lignin-based polyurethanes from Kraft lignin

E. A. Borges da Silva et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.