Related references
Note: Only part of the references are listed.A Survey of 3D Ear Recognition Techniques
Iyyakutti Iyappan Ganapathi et al.
ACM COMPUTING SURVEYS (2023)
Virtual patient representation with silicone guide and a 3D scanner accessory for a user-friendly facial scanning workflow: A clinical report of smile design and ceramic veneers
Khaled Q. Al Hamad et al.
JOURNAL OF PROSTHETIC DENTISTRY (2023)
The regulatory challenge of 3D bioprinting
Tajanka Mladenovska et al.
REGENERATIVE MEDICINE (2023)
Outer ear reconstruction using 3D technology
György Wersényi et al.
Current Directions in Biomedical Engineering (2023)
3D Printing in Otolaryngology Surgery: Descriptive Review of Literature to Define the State of the Art
Federica Zoccali et al.
HEALTHCARE (2023)
Tissue engineering of human ear pinna
Nilesh Bhamare et al.
CELL AND TISSUE BANKING (2022)
Assessment of clinical measures of total and regional body composition from a commercial 3-dimensional optical body scanner
Jonathan P. Bennett et al.
CLINICAL NUTRITION (2022)
Capturing patient anatomy for designing and manufacturing personalized prostheses
Naomi C. Paxton et al.
CURRENT OPINION IN BIOTECHNOLOGY (2022)
Imaging the External Ear: Practical Approach to Normal and Pathologic Conditions
Niedja S. G. Tsuno et al.
RADIOGRAPHICS (2022)
A Review on Sound Source Localization Systems
Dhwani Desai et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2022)
Microtia Ear Reconstruction with Patient-Specific 3D Models-A Segmentation Protocol
Juan Pablo Rodriguez-Arias et al.
JOURNAL OF CLINICAL MEDICINE (2022)
Individualized, Additively Manufactured Drug-Releasing External Ear Canal Implant for Prevention of Postoperative Restenosis: Development, In Vitro Testing, and Proof of Concept in an Individual Curative Trial
Farnaz Matin-Mann et al.
PHARMACEUTICS (2022)
A critical review on Classification of materials used in 3D printing process
Rajeev Ranjan et al.
MATERIALS TODAY-PROCEEDINGS (2022)
Implementation of 3D technologies in the workflow of auricular prosthetics: A method using optical scanning and stereolithography 3D printing
Tjitske Bannink et al.
JOURNAL OF PROSTHETIC DENTISTRY (2021)
3D Printing as a Promising Tool in Personalized Medicine
Vanessa Marcia Vaz et al.
AAPS PHARMSCITECH (2021)
An evaluation of 3D printing for the manufacture of a binaural recording device
Daragh O'Connor et al.
APPLIED ACOUSTICS (2021)
Binaural Modelling and Spatial Auditory Cue Analysis of 3D-Printed Ears
Te Meng Ting et al.
SENSORS (2021)
Evaluation of the Usability of a Low-Cost 3D Printer in a Tissue Engineering Approach for External Ear Reconstruction
Constanze Kuhlmann et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)
A Review of Vat Photopolymerization Technology: Materials, Applications, Challenges, and Future Trends of 3D Printing
Marek Pagac et al.
POLYMERS (2021)
3D Printing in Digital Prosthetic Dentistry: An Overview of Recent Developments in Additive Manufacturing
Josef Schweiger et al.
JOURNAL OF CLINICAL MEDICINE (2021)
3D printing of human ear pinna using cartilage specific ink
Nilesh Bhamare et al.
BIOMEDICAL MATERIALS (2021)
A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications
Yueyi Tian et al.
SCANNING (2021)
Comparison of Body Scanner and Manual Anthropometric Measurements of Body Shape: A Systematic Review
Lorena Rumbo-Rodriguez et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2021)
Modern Applications of 3D Printing: The Case of an Artificial Ear Splint Model
Athanasios Argyropoulos et al.
METHODS AND PROTOCOLS (2021)
A guideline for 3D printing terminology in biomedical research utilizing ISO/ASTM standards
Amy E. Alexander et al.
3D PRINTING IN MEDICINE (2021)
Current standards and ethical landscape of engineered tissues-3D bioprinting perspective
Muthu Parkkavi Sekar et al.
JOURNAL OF TISSUE ENGINEERING (2021)
Estimation of Spectral Notches From Pinna Meshes: Insights From a Simple Computational Model
Simone Spagnol et al.
IEEE-ACM TRANSACTIONS ON AUDIO SPEECH AND LANGUAGE PROCESSING (2021)
Multiscale sterilizable 3D printed auricular templates to guide cartilaginous framework sizing and sculpture during autologous microtia reconstruction
Bushra Alhazmi et al.
JPRAS OPEN (2021)
The Study of Using 3D Scan Technique to Evaluate the Expanding Method of Ear Reconstruction Before Operation
Rui Wan et al.
AESTHETIC PLASTIC SURGERY (2020)
Total Auricular Reconstruction Using a Single Extended Postauricular Flap Without Skin Grafting in Two Stages: Experiences of 106 Cases
Qi Chen et al.
AESTHETIC PLASTIC SURGERY (2020)
3D Printing in Dentistry-State of the Art
A. Kessler et al.
OPERATIVE DENTISTRY (2020)
Medical 3D Printing Cost-Savings in Orthopedic and Maxillofacial Surgery: Cost Analysis of Operating Room Time Saved with 3D Printed Anatomic Models and Surgical Guides
David H. Ballard et al.
ACADEMIC RADIOLOGY (2020)
3D printing for tissue engineering in otolaryngology
Roberto Di Gesu et al.
CONNECTIVE TISSUE RESEARCH (2020)
Conception and use of a custom-made facial mask for pressure therapy in complex facial wounds
C. Koudougou et al.
JOURNAL OF STOMATOLOGY ORAL AND MAXILLOFACIAL SURGERY (2020)
A systematic review on ear anthropometry and its industrial design applications
Fang Fu et al.
HUMAN FACTORS AND ERGONOMICS IN MANUFACTURING & SERVICE INDUSTRIES (2020)
The stiffness of living tissues and its implications for tissue engineering
Carlos F. Guimaraes et al.
NATURE REVIEWS MATERIALS (2020)
Measurement of Head-Related Transfer Functions: A Review
Song Li et al.
APPLIED SCIENCES-BASEL (2020)
Evaluation of 3D printing costs in surgery: a systematic review
Carole Serrano et al.
INTERNATIONAL JOURNAL OF TECHNOLOGY ASSESSMENT IN HEALTH CARE (2020)
Three-dimensional clinical handheld photoacoustic/ultrasound scanner
Changyeop Lee et al.
PHOTOACOUSTICS (2020)
Using 3D Printing Technology to Teach Cartilage Framework Carving for Ear Reconstruction
Thomas H. Jovic et al.
FRONTIERS IN SURGERY (2020)
An advanced prosthetic manufacturing framework for economic personalised ear prostheses
Rena L. J. Cruz et al.
SCIENTIFIC REPORTS (2020)
A Review of Stereolithography: Processes and Systems
Jigang Huang et al.
PROCESSES (2020)
DICOM segmentation and STL creation for 3D printing: a process and software package comparison for osseous anatomy
Takashi Kamio et al.
3D PRINTING IN MEDICINE (2020)
Economic savings for scientific free and open source technology: A review
Joshua M. Pearce
HARDWAREX (2020)
Ideal scaffold design for total ear reconstruction using a three-dimensional printing technique
Bok Ki Jung et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2019)
Assessment of reproducibility and reliability of facial expressions using 3D handheld scanner
Umut Ozsoy et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2019)
Additive manufacturing: Challenges, trends, and applications
Osama Abdulhameed et al.
ADVANCES IN MECHANICAL ENGINEERING (2019)
Precision in 3-Dimensional Surface Imaging of the Face: A Handheld Scanner Comparison Performed in a Cadaveric Model
Konstantin C. Koban et al.
AESTHETIC SURGERY JOURNAL (2019)
Rehabilitation Engineering: A perspective on the past 40-years and thoughts for the future
Rory A. Cooper et al.
MEDICAL ENGINEERING & PHYSICS (2019)
Additive Manufacturing of Biomaterials - The Evolution of Rapid Prototyping
Maria Touri et al.
ADVANCED ENGINEERING MATERIALS (2019)
Comparison of different body measurement techniques: 3D stationary scanner, 3D handheld scanner, and tape measurement
Sibei Xia et al.
JOURNAL OF THE TEXTILE INSTITUTE (2019)
Direct 3D Printing of Flexible Nasal Prosthesis: Optimized Digital Workflow from Scan to Fit
Amjad Nuseir et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2019)
Ear Reconstruction Simulation: From Handcrafting to 3D Printing
Elisa Mussi et al.
BIOENGINEERING-BASEL (2019)
Biomaterials for bone tissue engineering scaffolds: a review
Huawei Qu et al.
RSC ADVANCES (2019)
Ear Reconstruction and 3D Printing: Is It Reality?
Alexandra J. Lin et al.
CURRENT SURGERY REPORTS (2018)
A Data-augmented 3D Morphable Model of the Ear
Hang Dai et al.
PROCEEDINGS 2018 13TH IEEE INTERNATIONAL CONFERENCE ON AUTOMATIC FACE & GESTURE RECOGNITION (FG 2018) (2018)
Visualization of anatomy in normal and pathologic middle ears by cone beam CT
Christian Gueldner et al.
EUROPEAN ARCHIVES OF OTO-RHINO-LARYNGOLOGY (2017)
Semi-Automated Delineation of Breast Cancer Tumors and Subsequent Materialization Using Three-Dimensional Printing (Rapid Prototyping)
Ruediger Schulz-Wendtland et al.
JOURNAL OF SURGICAL ONCOLOGY (2017)
3D printing for clinical application in otorhinolaryngology
Nongping Zhong et al.
EUROPEAN ARCHIVES OF OTO-RHINO-LARYNGOLOGY (2017)
The technique for 3D printing patient-specific models for auricular reconstruction
Roberto L. Flores et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2017)
Clinical efficacy and effectiveness of 3D printing: a systematic review
Laura E. Diment et al.
BMJ OPEN (2017)
A framework for geometry acquisition, 3-D printing, simulation, and measurement of head-related transfer functions with a focus on hearing-assistive devices
Stine Harder et al.
COMPUTER-AIDED DESIGN (2016)
Three-dimensional autologous cartilage framework fabrication assisted by new additive manufactured ear-shaped templates for microtia reconstruction
Jiayu Zhou et al.
JOURNAL OF PLASTIC RECONSTRUCTIVE AND AESTHETIC SURGERY (2016)
Fabrication of three-dimensional scan-to-print ear model for microtia reconstruction
Byoungjun Jeon et al.
JOURNAL OF SURGICAL RESEARCH (2016)
Personalized development of human organs using 3D printing technology
Dina Radenkovic et al.
MEDICAL HYPOTHESES (2016)
Multi-model Ear Database for Biometric Applications
Atanas Nikolov et al.
INNOVATIVE APPROACHES AND SOLUTIONS IN ADVANCED INTELLIGENT SYSTEMS (2016)
Review of Open Source and Freeware CAD Systems for Use with 3D-Printing
Stefan Junk et al.
26TH CIRP DESIGN CONFERENCE (2016)
3D printing in dentistry
A. Dawood et al.
BRITISH DENTAL JOURNAL (2015)
Precision of three-dimensional stereo-photogrammetry (3dMD™) in anthropometry of the auricle and its application in microtia reconstruction
Zung-Chung Chen et al.
JOURNAL OF PLASTIC RECONSTRUCTIVE AND AESTHETIC SURGERY (2015)
Preoperative Rib Cartilage Imaging in 3-Dimensional Chest Computed Tomography for Auricular Reconstruction for Microtia
Hyungsuk Kim et al.
ANNALS OF PLASTIC SURGERY (2014)
3D ear recognition using local salience and principal manifold
Xiaopeng Sun et al.
GRAPHICAL MODELS (2014)
Creating the Sydney York Morphological and Acoustic Recordings of Ears Database
Craig T. Jin et al.
IEEE TRANSACTIONS ON MULTIMEDIA (2014)
Magnetic Resonance Imaging of the Ear for Patient-Specific Reconstructive Surgery
Luc Nimeskern et al.
PLOS ONE (2014)
3D printing of composite tissue with complex shape applied to ear regeneration
Jung-Seob Lee et al.
BIOFABRICATION (2014)
Total Reconstruction of the Auricle: Our Experiences on Indications and Recent Techniques
K. Storck et al.
BIOMED RESEARCH INTERNATIONAL (2014)
3D Printed Bionic Ears
Manu S. Mannoor et al.
NANO LETTERS (2013)
Construction of an Implant-Retained Auricular Prosthesis with the Aid of Contemporary Digital Technologies: A Clinical Report
Muhanad M. Hatamleh et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2013)
A Novel Technique for Sculpting Costal Cartilage in Microtia Repair and Rhinoplasty
Linda N. Lee et al.
JAMA FACIAL PLASTIC SURGERY (2013)
A Review of Recent Advances in 3D Ear- and Expression-Invariant Face Biometrics
Syed M. S. Islam et al.
ACM COMPUTING SURVEYS (2012)
Intraoperative cone beam computed tomography in the management of facial fractures
B. A. Stuck et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2012)
Mechanism for generating peaks and notches of head-related transfer functions in the median plane
Hironori Takemoto et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2012)
Evaluation of direct and indirect additive manufacture of maxillofacial prostheses
Dominic Eggbeer et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2012)
Structured-light 3D surface imaging: a tutorial
Jason Geng
ADVANCES IN OPTICS AND PHOTONICS (2011)
A Novel Algorithm for Autologous Ear Reconstruction
Françoise Firmin et al.
Seminars in Plastic Surgery (2011)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Markov Random Field Surface Reconstruction
Rasmus R. Paulsen et al.
IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS (2010)
Reconstructing engineering from practice
James Trevelyan
Engineering Studies (2010)
Fabrication of an Auricular Prosthesis Using Computed Tomography and Rapid Prototyping Technique
Banu Karayazgan-Saracoglu et al.
JOURNAL OF CRANIOFACIAL SURGERY (2009)
Boundary element simulations of the transfer function of human heads and baffled pinnae using accurate geometric models
Yuvi Kahana et al.
JOURNAL OF SOUND AND VIBRATION (2007)
Relearning sound localization with a new ear
MM Van Wanrooij et al.
JOURNAL OF NEUROSCIENCE (2005)
On marching cubes
GM Nielson
IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS (2003)
Tissue engineering: A 21st century solution to surgical reconstruction
JR Fuchs et al.
ANNALS OF THORACIC SURGERY (2001)