4.4 Article

Analysis of charge transport resistance of ZnO-based DSSCs because of the effect of different compression temperatures

Journal

AIP ADVANCES
Volume 13, Issue 9, Pages -

Publisher

AIP Publishing
DOI: 10.1063/5.0166767

Keywords

-

Ask authors/readers for more resources

This study investigates the effect of compression temperature on the performance of Zinc Oxide (ZnO)-based dye-sensitized solar cells (DSSC). The results show that cells prepared at a compression temperature of 70 degrees Celsius under 60 MP pressure exhibit the most favorable photovoltaic performance. Scanning Electron Microscopy images confirm that a compression temperature higher than 70 degrees Celsius leads to defects on the photoelectrode surface.
This article represents a research study about the effect of compression temperature on the performance of Zinc Oxide (ZnO)-based dye-sensitized solar cell (DSSC). To find the optimum compression temperature, the electrodeposited photoanodes are subjected to compression at 60 MP with various compression temperatures ranging from room temperature to 80 C-degrees. The performance analysis involved the analysis of Electrochemical Impedance Spectroscopy (EIS) and photocurrent-voltage (I-V) data under dark and illuminated conditions. The EIS data are examined to gain insights into the electron transport mechanism and validate the cell's performance under optimum compression temperature. The findings of this study demonstrate that cells prepared at 60 MP with a compression temperature of 70 C-degrees show the most favorable photovoltaic performance compared to cells prepared at other compression temperatures. Thickness measurement confirms that increasing the compression temperature ensures a compact layer of photoelectrode. A compression temperature greater than 70 C-degrees causes several defects on the photoelectrode surface, as confirmed by the Scanning Electron Microscopy Image. EIS and I-V data confirm that the cell prepared at 60 MP and 70 C-degrees heating gives comparatively lower series resistance and higher shunt resistance. Though the series and shunt resistance exhibited different values under dark and illumination conditions, their trends remained consistent. Under this optimized compression temperature the cells achieved a maximum efficiency (eta) of 2.78%, accompanied by an open circuit voltage (V-infinity) of 0.58 V, a photocurrent density (Jsc) of 8.87 mA/cm(2), and a fill factor of 0.54.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.4
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available