☆ 4.5 Article

3D printable concrete without chemical admixtures: Fresh and hardened properties

STRUCTURAL CONCRETE (2023)

Related references

Note: Only part of the references are listed.

Review Engineering, Civil

Top challenges to widespread 3D concrete printing (3DCP) adoption - A review

P. S. Ambily et al.

Summary: 3D concrete printing is a new trend in construction, using a robotic arm and a nozzle to pump concrete layer by layer to print structural components or entire buildings. It has applications on Earth and in space habitat construction, but there are constraints and challenges associated with its use. This review highlights the challenges related to materials, strength, and printers in the 3D concrete printing process, and emphasizes its applications in the construction sector. By addressing these challenges through suitable material selection and printing parameter configuration, it is possible to overcome issues related to workability, hardening time, mechanical properties, and durability. The use of 3D concrete printing on construction sites offers cost and waste reductions, faster build rates, safer working environments, and the potential for more intricate architecture. Reinforcing methods and sustainable processes are commonly encountered challenges in 3D concrete printing. Lack of technology, material variability, process optimization, and other issues act as barriers to the advancement of concrete 3D printing technology. In conclusion, if these challenges are addressed, 3D concrete printing has great potential and opportunities in the construction industry.

EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2023)

Add to Collection

Article Chemistry, Physical

Mechanical Performance of 3D Printed Concrete in Steam Curing Conditions

Bolin Wang et al.

Summary: This study explores the impact of steam curing conditions on the mechanical performance of printed concrete and finds the optimal curing conditions. The results show that steam curing conditions and solid waste incorporation improve the interlayer bond in printed concrete.

MATERIALS (2022)

Add to Collection

Review Construction & Building Technology

Test methods for 3D printable concrete

Senthil Kumar Kaliyavaradhan et al.

Summary: This paper provides a comprehensive review of the test methods used to characterize the fresh and hardened properties of 3DPC and discusses the factors influencing test techniques and future research directions for standardizing the test methods. The extensive information provided in this review will assist the engineering community and 3DPC manufacturers in selecting suitable methods or standards to test 3DPC.

AUTOMATION IN CONSTRUCTION (2022)

Add to Collection

Article Construction & Building Technology

Role of chemical admixtures on 3D printed Portland cement: Assessing rheology and buildability

Marcelo Tramontin Souza et al.

Summary: Printable concretes require specific rheological properties that can be improved with chemical additives, but interactions between different additives in co-assembly can affect their effectiveness.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Role of temperature in 3D printed geopolymers: Evaluating rheology and buildability

Marcelo Tramontin Souza et al.

Summary: One of the most challenging tasks in making 3D printing technology feasible for large-scale buildings is the mix design of binders with fluidity for pumping and at the same time consistency for printing. High-fluid mixtures are better for pumping but do not support the overlap of layers, which can be overcome by manipulating temperature. This work demonstrates how high-fluid mixtures can be quickly turned into buildable ones through a systematic heating process for 3D printed geopolymers, providing valuable insight for setting rheology and buildability.

MATERIALS LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Mechanical Properties of Hardened 3D Printed Concretes and Mortars-Development of a Consistent Experimental Characterization Strategy

Maximilian Meurer et al.

Summary: This study investigates the mechanical properties of 3D printed concrete and mortar, proposes a set of easy-to-use experimental methods, and reveals the anisotropic material behavior under different loading conditions. It also confirms that the interval time between deposition of subsequent layers has a crucial effect on material properties.

MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Microstructural characterization of 3D printed concrete

Shiwei Yu et al.

Summary: This study investigates the microstructural characterization of 3D printed concrete using MIP and X-ray CT, revealing that the presence of more macropores and large voids in the samples, leading to lower strength compared to mould-cast specimens. The morphology of voids in the 3D printed samples is also found to be more irregular and elongated, particularly at the interlayer.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Sustainable materials for 3D concrete printing

Shantanu Bhattacherjee et al.

Summary: This paper examines the sustainability aspects of binders used in concrete 3D concrete printing, emphasizing the importance of reducing embodied impacts to enhance sustainability potential. It reviews literature on different binder systems and explores alternative binders, highlighting the effect of using supplementary cementing materials and alternative binder systems for improving the sustainability of 3D printed structures. By quantifying environmental impacts, the paper illustrates the potential of sustainability assessment in terms of energy consumption and CO2 emissions with different binder systems.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Construction & Building Technology

Ambient temperature cured 'just-add-water' geopolymer for 3D concrete printing applications

Shin Hau Bong et al.

Summary: The research aims to improve the printability performance and mechanical properties of a geopolymer for 3D concrete printing by adjusting the type and dosage of activators and retarders to identify an optimum mixture. The results show that the optimum mixture exhibits excellent performance and energy-saving indicators, contributing to the large-scale applications and commercial viability of geopolymers in 3D concrete printing.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Engineering, Civil

Fresh and Hardened Properties of 3D High-Strength Printing Concrete and Its Recent Applications

Fatih Ozalp et al.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture

Yu Chen et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Review Construction & Building Technology

Extrusion-based additive manufacturing with cement-based materials - Production steps, processes, and their underlying physics: A review

V Mechtcherine et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Review Construction & Building Technology

Additive manufacturing: Technology, applications, markets, and opportunities for the built environment

Ans Al Rashid et al.

AUTOMATION IN CONSTRUCTION (2020)

Add to Collection

Article Construction & Building Technology

Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction

Arun R. Arunothayan et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Mix suitable for concrete 3D printing: A review

M. A. Khan

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Article Construction & Building Technology

Inline quantification of extrudability of cementitious materials for digital construction

V. N. Nerella et al.

CEMENT & CONCRETE COMPOSITES (2019)

Add to Collection

Article Chemistry, Physical

Method of Optimisation for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications

Shin Hau Bong et al.

MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion

R. J. M. Wolfs et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification

Taylor Marchment et al.

MATERIALS & DESIGN (2019)

Add to Collection

Review Construction & Building Technology

Digital Concrete: A Review

Timothy Wangler et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Article Construction & Building Technology

3D printing using concrete extrusion: A roadmap for research

R. A. Buswell et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry

Delphine Marchon et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes

Da-Wang Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Effect of surface moisture on inter-layer strength of 3D printed concrete

Jay G. Sanjayan et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Engineering, Multidisciplinary

Measurement of tensile bond strength of 3D printed geopolymer mortar

Biranchi Panda et al.

MEASUREMENT (2018)

Add to Collection

Article Construction & Building Technology

Vision of 3D printing with concrete - Technical, economic and environmental potentials

Geert De Schutter et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Combined Economic and Mechanical Performance Optimization of Recycled Aggregate Concrete with High Volume of Fly Ash

Rawaz Kurda et al.

APPLIED SCIENCES-BASEL (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Additive manufacturing of geopolymer for sustainable built environment

Biranchi Panda et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material

Biranchi Panda et al.

MATERIALS LETTERS (2017)

Add to Collection

Article Construction & Building Technology

Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture

Ali Kazemian et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Hardened properties of high-performance printing concrete

T. T. Le et al.

CEMENT AND CONCRETE RESEARCH (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.