☆ 4.6 Article

Optimization Design and Nonlinear Bending of Bio-Inspired Helicoidal Composite Laminated Plates

MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Application of the Ritz method for the bending and stress analysis of thin rectilinear orthotropic composite sector plates

Valerio G. Belardi et al.

Summary: This paper investigates the linear elastic behavior of composite sector plates with rectilinear orthotropy, focusing on the determination of displacement and stress fields. The plates are reinforced with unidirectional fibers organized along straight directions that make variable angles with the radial direction. The fundamental equations for these plates are obtained using Classical Lamination Theory, and the mid-surface deflection is derived using a combination of the principle of virtual works and the Ritz method. Various displacement constraints and approximation functions are considered, and symmetrical stacking sequences are used to validate the proposed method.

THIN-WALLED STRUCTURES (2023)

Add to Collection

Article Engineering, Civil

Nonlinear bending and thermal postbuckling of thermoplastic composite laminated plates under temperature variation

Taoye Lu et al.

Summary: This paper proposes a physical model to report new features of CFRTPC laminated plates undergoing thermo-mechanical loads. The temperature-dependent and strain-dependent stress-strain relations of CFRTPC are determined experimentally, and the nonlinear bending responses and thermal postbuckling behaviors of CFRTPC laminated plates are predicted. The influences of temperature variation, geometric parameters and boundary conditions on the nonlinear bending deflection, moment and thermal postbuckling behaviors are compared.

THIN-WALLED STRUCTURES (2023)

Add to Collection

Article Engineering, Civil

Nonlinear deflection characteristics of damaged composite structure theoretical prediction and experimental verification

Vikash Kumar et al.

Summary: This research presents a nonlinear computational model for predicting the deflection responses of damaged layered composite structures. The model is verified through in-house experimentation. The model utilizes higher-order polynomial kinematics, Green's strain, and nonlinear isoparametric finite element technique to numerically evaluate the deflection responses of combined damage curved shell structures. The accuracy of the model is explored by comparing it with published literature and experimental results, demonstrating its efficacy.

STRUCTURES (2023)

Add to Collection

Article Engineering, Civil

3D printing and modelling of continuous carbon fibre reinforced composite grids with enhanced shear modulus

Yuan Chen et al.

Summary: In this research, topologically-tailored continuous carbon fibre reinforced polyamide composite grids were 3D printed to show enhanced shear modulus. A numerical scheme was developed to predict the elastic responses and behaviors of the printed composite grids. The experiments verified the design and the numerical model, and the results showed a significant increase in shear modulus.

ENGINEERING STRUCTURES (2023)

Add to Collection

Article Engineering, Manufacturing

Dynamic behaviour of Bio-inspired heterocyclic aramid Fibre-reinforced laminates subjected to Low-velocity Drop-weight impact

Caizheng Wang et al.

Summary: This study investigated the low-velocity impact response of two helicoidal laminates and found that the bio-inspired linear helicoidal laminate had the highest stiffness and impact resistance under out-of-plane low-velocity impact. However, compared to cross-ply laminates, helicoidal laminates showed lower energy absorption capabilities.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Marine

Bending, buckling and linear vibration of bio-inspired composite plates

S. A. Mohamed et al.

Summary: This study investigates the static, buckling, and vibration behaviors of laminated composite plate structure with helicoidal orientation scheme for the first time. It explores the influence of different parameters and boundary conditions on the mechanical performance of the composite plate, highlighting the significant impact of laminate sequence.

OCEAN ENGINEERING (2022)

Add to Collection

Article Engineering, Multidisciplinary

A novel experiment-based approach on nonlinear bending analysis of thermoplastic composite laminates

Taoye Lu et al.

Summary: This study introduces a novel experimental approach and a new physical model for analyzing the nonlinear bending behavior of carbon fiber reinforced thermoplastic (CFRTP) composites. The bimodular nonlinear model is validated through comparison with experimental data and finite element analysis results, leading to a discussion on the effects of various factors on the nonlinear bending properties of CFRTP composite laminate plates.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Engineering, Manufacturing

Ultra-thin-ply CFRP Bouligand bio-inspired structures with enhanced load-bearing capacity, delayed catastrophic failure and high energy dissipation capability

Lorenzo Mencattelli et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Mechanics

The nonlinear, third-order thickness and shear deformation theory for statics and dynamics of laminated composite shells

Marco Amabili et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Engineering, Civil

Nonlinear bending analysis of FG-CNTRC annular plates with variable thickness on elastic foundation

M. M. Keleshteri et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Mechanics

Low-velocity impact resistance behaviors of bio-inspired helicoidal composite laminates with non-linear rotation angle based layups

Hongyong Jiang et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Materials Science, Composites

Realising bio-inspired impact damage-tolerant thin-ply CFRP Bouligand structures via promoting diffused sub-critical helicoidal damage

Lorenzo Mencattelli et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Engineering, Manufacturing

Improving laminates through non-uniform inter-ply angles

J. L. Liu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Engineering, Mechanical

An experimental and numerical study on the crush behaviour of hybrid unidirectional/woven carbon-fibre reinforced composite laminates

Haibao Liu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Materials Science, Composites

Effects of inter-ply angles on the failure mechanisms in bioinspired helicoidal laminates

J. L. Liu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Optimization of fibers orientation in a composite specimen

Sara M. C. Monte et al.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2017)

Add to Collection

Article Engineering, Biomedical

Twisting cracks in Bouligand structures

Nobphadon Suksangpanya et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

Add to Collection

Article Mechanics

Low-velocity impact response of composite sandwich structures: Modelling and experiment

Yuan Chen et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Engineering, Mechanical

On the general framework of high order shear deformation theories for laminated composite plate structures: A novel unified approach

Tuan N. Nguyen et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

Add to Collection

Article Engineering, Mechanical

Nonlinear bending analysis of variable cross-section laminated plates using the dynamic relaxation method

Javad Alamatian et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Mechanics

A new inverse hyperbolic shear deformation theory for static and buckling analysis of laminated composite and sandwich plates

Neeraj Grover et al.

COMPOSITE STRUCTURES (2013)

Add to Collection

Article Multidisciplinary Sciences

Mechanical adaptability of the Bouligand-type structure in natural dermal armour

Elizabeth A. Zimmermann et al.

NATURE COMMUNICATIONS (2013)

Add to Collection

Article Mechanics

Large deformation flexural behavior of laminated composite skew plates: An analytical approach

A. K. Upadhyay et al.

COMPOSITE STRUCTURES (2012)

Add to Collection

Article Mechanics

Nonlinear bending analysis of annular FGM plates using higher-order shear deformation plate theories

M. E. Golmakani et al.

COMPOSITE STRUCTURES (2011)

Add to Collection

Article Engineering, Manufacturing

Mechanical behavior of bio-inspired laminated composites

Liang Cheng et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

Add to Collection

Article Mathematics, Applied

Geometrically nonlinear bending analysis of laminated composite plate

Padmanav Dash et al.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Influence of Structural Principles on the Mechanics of a Biological Fiber-Based Composite Material with Hierarchical Organization: The Exoskeleton of the Lobster Homarus americanus

Helge-Otto Fabritius et al.

ADVANCED MATERIALS (2009)

Add to Collection

Article Mechanics

Design optimization of composite laminated structures using genetic algorithms and finite element analysis

F. S. Almeida et al.

COMPOSITE STRUCTURES (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanics-based analysis of selected features of the exoskeletal microstructure of Popillia japonica

Liang Cheng et al.

JOURNAL OF MATERIALS RESEARCH (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Image analyses of two crustacean exoskeletons and implications of the exoskeletal microstructure on the mechanical behavior

Liang Cheng et al.

JOURNAL OF MATERIALS RESEARCH (2008)

Add to Collection

Article Mechanics

Large deformation analysis of moderately thick laminated plates on nonlinear elastic foundations by DQM

P. Malekzadeh et al.

COMPOSITE STRUCTURES (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Helicoidal composites

T Apichattrabrut et al.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2006)

Add to Collection

Article Mechanics

Nonlinear bending analysis of unsymmetric cross-ply laminated plates with piezoelectric actuators in thermal environments

HS Shen

COMPOSITE STRUCTURES (2004)

Add to Collection

Article Mechanics

Transient response of composite sandwich plates

AK Nayak et al.

COMPOSITE STRUCTURES (2004)

Add to Collection

Article Engineering, Mechanical

Hygrothermal effects on the nonlinear bending of shear deformable laminated plates

HS Shen

JOURNAL OF ENGINEERING MECHANICS (2002)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Topology optimization of laminated plates with prestress

NL Pedersen

COMPUTERS & STRUCTURES (2002)

Add to Collection

Article Mechanics

Nonlinear bending of shear deformable laminated plates under transverse and in-plane loads and resting on elastic foundations

HS Shen

COMPOSITE STRUCTURES (2000)

Add to Collection

Article Engineering, Mechanical

Non-linear bending of shear deformable laminated plates under lateral pressure and thermal loading and resting on elastic foundations

HS Shen

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.