☆ 4.6 Review

Hydrophilic and Hydrophobic Surfaces: Features of Interaction with Liquid Drops

MATERIALS (2023)

Related references

Note: Only part of the references are listed.
Article Thermodynamics

A simple model of heating and evaporation of droplets on a superhydrophobic surface

D. V. Antonov et al.

Summary: A new model for heating and evaporation of a droplet on a superhydrophobic surface is proposed, using the analytical solution to the heat transfer equation. The assumptions that heat supplied by conduction and radiation is distributed throughout the droplet volume and that the effects of ambient gas temperature gradient can be ignored, are discussed. The model is validated using experimental data, showing good agreement with the results when the assumptions are satisfied.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2023)

Add to Collection
Article Materials Science, Coatings & Films

Low-cost superhydrophobic coating on aluminum alloy with self-cleaning and repellency to water-based mixed liquids for anti-corrosive applications

Rafael G. C. da Silva et al.

Summary: This study aims to develop a low-cost superhydrophobic coating on 5052 aluminum alloy using a combination of methods. The applied methodology involves acid etching, deposition of a layered double hydroxide (LDH) film, and chemical modification of the surface. The obtained coating exhibits high repellency, low sliding angles, and corrosion inhibition efficiency.

SURFACE & COATINGS TECHNOLOGY (2023)

Add to Collection
Article Chemistry, Physical

Durable Superhydrophobic Coatings on Tungsten Surface by Nanosecond Laser Ablation and Fluorooxysilane Modification

Ekaterina A. Kuzina et al.

Summary: Tungsten is a material with high thermal conductivity, high melting point, high hardness, and high density, making it suitable for various applications. However, the formation of surface oxides on tungsten significantly reduces its mechanical properties and makes it prone to interaction with water. Researchers have developed a series of superhydrophobic coatings for tungsten surfaces using nanosecond laser treatment and chemical vapor deposition. The durability of the coatings depends on surface morphology and composition, which can be controlled by adjusting the parameters of the laser treatment. The optimized coating exhibited high superhydrophobic properties even after subjected to abrasion, contact with water droplets, and falling sand tests.

MATERIALS (2023)

Add to Collection
Article Environmental Sciences

Spreading of Impacting Water Droplet on Surface with Fixed Microstructure and Different Wetting from Superhydrophilicity to Superhydrophobicity

Sergey Starinskiy et al.

Summary: This work investigates the spreading behavior of water droplets with contact angles ranging from 0 to 160 degrees on various surfaces. Superhydrophilicity is achieved through laser treatment, followed by hydrophobization using fluoropolymer coating of different thicknesses. The chosen approach allows for surfaces with different wettability but the same morphology. The parameter t* corresponding to the time when the capillary wave reaches the droplet apex is established. It is shown that the droplet height change at earlier time moments is independent of the substrate type. Comparison with other authors' data reveals that the motion of the contact line weakly depends on the used structure if its characteristic size is less than 10 μm.

WATER (2023)

Add to Collection
Article Materials Science, Multidisciplinary

Stress corrosion behavior and microstructure analysis of Al-Zn-Mg-Cu alloys friction stir welded joints under different aging conditions

Fuqiang Guo et al.

Summary: The stress corrosion evolution of friction stir welding joints of Al-Zn-Mg-Cu alloy was studied during slow strain rate tensile testing using in-situ electrochemical impedance spectroscopy. The slow stress corrosion process can be divided into three stages based on the corrosion trend, with corresponding charge-transfer resistance showing three evolutionary patterns. The grain boundary precipitates in the thermal machine affected zone (TMAZ) of the pre-weld RRA treatment are more discrete and coarser, with a higher Cu content, reducing the potential difference with the surrounding substrate and exhibiting higher stress corrosion resistance.

CORROSION SCIENCE (2023)

Add to Collection
Article Chemistry, Physical

Development of sustainable superhydrophobic coatings on aluminum substrate using magnesium nanoparticles for enhanced catalytic activity, self-cleaning, and corrosion resistance

Noor Hassan et al.

Summary: This study developed sustainable superhydrophobic surfaces using magnesium nanoparticles (Mg-NPs) and achieved excellent results on the aluminum substrate. The creation of Mg-NPs@SHS was described in detail, highlighting its advantages over other coatings in terms of simplicity, eco-friendliness, and surface robustness. Additionally, the Mg-NPs@SHS showed remarkable self-cleaning, super buoyancy, anti-icing property, and excellent catalytic reduction efficiency. These findings suggest promising applications of Mg-NPs@SHS in sustainable environmental practices.

JOURNAL OF MOLECULAR LIQUIDS (2023)

Add to Collection
Article Engineering, Biomedical

The effect of surface roughening of orthodontic elastomers on hydrophobicity and in vitro adherence of Streptococcus gordonii

Michael G. Skilbeck et al.

Summary: The aim of this study was to reduce bacterial adhesion on orthodontic elastomers by creating a superhydrophobic surface through surface modification. Different sandpapers were used to modify the surface roughness of the elastomers. The roughness of the elastomers influenced their hydrophobicity and bacterial adhesion.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2023)

Add to Collection
Article Materials Science, Multidisciplinary

Experimentally validated phase-field model to design the wettability of micro-structured surfaces

Marina Provenzano et al.

Summary: Surfaces with tailored wettability have gained significant attention for their various potential applications. Traditional theories are insufficient in describing intermediate and metastable states, leading to a lack of comprehensive understanding of the combined chemical and morphological effects on surface wettability. This study proposes a numerical method based on the phase-field model to predict and assist in the design of micro-structured surfaces with desired wettability. The validated model can aid in the design and prototyping of surfaces with tailored wettability, representing the final step of a predictive multi-scale model.

MATERIALS & DESIGN (2023)

Add to Collection
Article Chemistry, Physical

Cleaning Strategies of Synthesized Bioactive Coatings by PEO on Ti-6Al-4V Alloys of Organic Contaminations

Avital Schwartz et al.

Summary: This research studied the impact of various cleaning methods on coating morphology and their effectiveness in removing organic contaminants. Bioactive coatings containing titanium oxides and hydroxyapatite were obtained through plasma electrolytic oxidation. The results showed that samples obtained from molten salt had a finer crystalline structure compared to those obtained from aqueous electrolytes. After applying surface cleaning methods, the carbon content decreased, indicating a reduction in organic contaminations. The most effective and moderate cleaning method was ozone treatment.

MATERIALS (2023)

Add to Collection
Article Chemistry, Multidisciplinary

Self-Healing Hydrophilic Porous Photothermal Membranes for Durable and Highly Efficient Solar-Driven Interfacial Water Evaporation

Fuchang Xu et al.

Summary: Developing a solar-driven interfacial water evaporator with self-healing ability and high-efficiency water evaporation performance is highly desirable. In this study, a self-healing hydrophilic porous photothermal (SHPP) membrane was fabricated by utilizing a self-healing hydrophilic polymer, and it was used in a solar-driven interfacial evaporator. The SHPP membrane exhibited high water evaporation rate and energy efficiency, and its structural integrity could be entirely restored through reformation of hydrogen bonds, indicating its stability and long-lasting performance.

CCS CHEMISTRY (2022)

Add to Collection
Article Thermodynamics

Dynamic behaviors of impinging viscoelastic droplets on superhydrophobic surfaces heated above the boiling temperature

Bin Li et al.

Summary: The impact dynamics of viscoelastic droplets on a superhydrophobic surface beyond the boiling temperature was studied, with findings suggesting that surface temperature and polymer concentration have varying effects on droplet behavior. Additionally, temperature increase or polymer concentration decrease can accelerate droplet retraction speed.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection
Article Thermodynamics

Simulations of contact angle hysteresis effects in droplet sliding on inclined isothermal surfaces and droplet evaporating on heated horizontal surfaces by a lattice Boltzmann method with a variable solid-fluid interaction strength scheme

B. B. Kazemian et al.

Summary: A variable solid-fluid interaction strength scheme compatible with the lattice Boltzmann method is introduced to investigate contact angle hysteresis phenomena numerically. The method is demonstrated to accurately reproduce the observed behaviors during droplet sliding and evaporation processes, and the results are in agreement with previous experimental investigations.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection
Article Optics

Effect of ultrasonic vibration-assisted laser treatment on surface roughness and wettability of aluminum

Yan Wang et al.

Summary: In this study, a new method using ultrasonic vibration-assisted laser processing was proposed to fabricate aluminum superhydrophobic surface. The influence of ultrasonic vibration on contact angle and surface roughness was investigated through experiments and simulations. It was proven that this method can achieve a hydrophobic state with low surface roughness, making it suitable for various self-cleaning applications.

OPTICS AND LASER TECHNOLOGY (2022)

Add to Collection
Article Engineering, Chemical

Droplet-droplet, droplet-particle, and droplet-substrate collision behavior

A. G. Islamova et al.

Summary: This paper presents research findings on the collision outcomes of water droplets with solid particles and substrates with varying surface wettability. The study constructed maps of two collision regimes and analyzed the number and size of secondary droplets based on the Weber number and dimensionless impact parameter. By comparing the droplet-particle collision regimes with other collision scenarios, the study identified significant differences and similarities in terms of the number and size of secondary droplets. These findings are important for the development of secondary droplet atomization technologies.

POWDER TECHNOLOGY (2022)

Add to Collection
Article Chemistry, Physical

Evolution of Superhydrophilic Aluminum Alloy Properties in Contact with Water during Cyclic Variation in Temperature

Alexander G. Domantovsky et al.

Summary: This study investigates the evolution of a superhydrophilic aluminum alloy's properties when in contact with water, revealing that chemical reactions compromise its mechanical durability. As a result, superhydrophilic materials cannot be considered as effective anti-icing materials.

MATERIALS (2022)

Add to Collection
Article Thermodynamics

Time evolution of composite fuel/water droplet radii before the start of puffing/micro-explosion

R. M. Fedorenko et al.

Summary: This study investigates the puffing and micro-explosion processes in composite water/fuel droplets (kerosene, Diesel fuel, and rapeseed oil) through experimental and numerical methods. The experiments were conducted in quiescent air at atmospheric pressure with natural convection. The results show that the time to puffing/micro-explosion decreases with increasing ambient temperature and increases with increasing initial droplet radii for all three fuels. The observed longer time for rapeseed oil droplets compared to the predicted time is attributed to the formation of bubbles, which is not considered in the model used in the analysis.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection
Article Chemistry, Physical

Morphological Analysis of Laser Surface Texturing Effect on AISI 430 Stainless Steel

Edit Roxana Moldovan et al.

Summary: Laser surface texturing (LST) is a method using laser to create micro-structures on material surfaces for improved performance. Different pattern designs have been found to influence the surface properties of materials. Adjustment of laser parameters can lead to the preparation of micro-structures with varying depths and shapes.

MATERIALS (2022)

Add to Collection
Article Chemistry, Applied

Optimization of coating parameters for fabrication of robust superhydrophobic (SHP) aluminum and evaluation of corrosion performance in aggressive medium

T. P. Rasitha et al.

Summary: The huge interest in superhydrophobic surfaces is due to their potential engineering applications in various fields. However, there is a challenge in fabricating mechanically robust superhydrophobic surfaces and understanding their corrosion performance in aggressive conditions. In this study, a simple and eco-friendly method was used to fabricate mechanically durable superhydrophobic aluminum surfaces with self-cleaning properties. The coating parameters were optimized to achieve desirable properties, and the adhesion between the substrate and the coating was improved. The superhydrophobic behavior was attributed to the hierarchical micro-nano roughness and the presence of specific chemical groups. The corrosion resistance of the superhydrophobic aluminum surfaces was significantly higher than that of bare surfaces. The results showed that the fabricated superhydrophobic surfaces had excellent properties for various applications, including seawater applications.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection
Article Chemistry, Physical

Hydroxyapatite Coating on Ti-6Al-7Nb Alloy by Plasma Electrolytic Oxidation in Salt-Based Electrolyte

Avital Schwartz et al.

Summary: Titanium alloys have good biocompatibility and mechanical properties, making them suitable for dental and orthopedic implants. Improving their osseointegration with human bones can be achieved by developing hydroxyapatite (HA) on the treating surface using the plasma electrolytic oxidation (PEO) method in molten salt. In this study, a coating of titanium oxide-containing HA nanoparticles was formed on Ti-6Al-7Nb alloy by PEO in molten salt, and hydrothermal treatment was applied to form HA crystals. The effect of current and voltage frequency on the coating's morphology, chemical, and phase composition was studied.

MATERIALS (2022)

Add to Collection
Article Polymer Science

Wetting Characteristics of Nanosilica-Poly (acrylic acid) Transparent Anti-Fog Coatings

Sevil Turkoglu et al.

Summary: The effect of particle loading on the wetting properties of coatings was investigated in this study. It was found that an increase in particle loading improved the wetting properties and resulted in superhydrophilic behavior. The surface chemistry and topography were identified as the key factors determining the wetting properties. The coatings also showed good adhesion and anti-fogging behavior. Additionally, the transparency of the coatings was greatly improved with an increase in particle loading.

POLYMERS (2022)

Add to Collection
Article Energy & Fuels

The durability of superhydrophobic and slippery liquid infused porous surface coatings under corona discharge characteristic of the operation of high voltage power transmission lines

Kirill A. Emelyanenko et al.

Summary: The application of polyfunctional water-repelling coatings for high voltage outdoor power lines has attracted significant interest due to their ability to enhance performance. However, the harsh conditions associated with high voltage pose challenges to the durability of these coatings.

ENERGY REPORTS (2022)

Add to Collection
Article Engineering, Chemical

Molecular dynamics simulation of single droplet behavior on the windward side of a fiber filter during coalescence

Chaolei Wang et al.

Summary: The classical single-fiber theory is widely used in fiber filtration. In this study, the behavior of droplets on fiber surface under collision and interception mechanisms was studied by simulating the process of a droplet impacting a cylinder. The results showed that the spreading factor increases with the decrease of contact angle and the increase of fiber diameter, and decreases gradually when the impact location deviates from the fiber center.

CHEMICAL ENGINEERING SCIENCE (2022)

Add to Collection
Article Thermodynamics

Lattice Boltzmann study of droplet evaporation on a heated substrate under a uniform electric field

Jiang Yao et al.

Summary: In this paper, a two-dimensional hybrid thermal lattice Boltzmann method coupled with the leaky dielectric model is used to investigate droplet evaporation on a heated substrate under the influence of an electric field. It is found that the electric field can change the droplet morphology, internal flow, heat transfer, and evaporation time. Applying a vertical electric field increases the evaporation time of a droplet, while applying a horizontal electric field decreases it.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Nanoscale Coatings Derived from Fluoroalkyl and PDMS Alkoxysilanes on Rough Aluminum Surfaces for Improved Durability and Anti-Icing Properties

Tien N. H. Lo et al.

Summary: Anti-icing aluminum surfaces with hierarchical structures and low surface energy silane coatings were successfully fabricated, showing excellent durability and low ice adhesion strength. The synergistic effect of PDMS and FD functional groups contributed to the outstanding anti-icing properties and durability, particularly in low temperatures and high humidity conditions.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Recent progresses and applications in laser-based surface texturing systems

Vijay Kumar et al.

Summary: Laser surface texturing is a well-known technique for enhancing the surface topography of engineering materials, and has been widely applied in areas such as lubrication, wear behavior, and surface contact.

MATERIALS TODAY COMMUNICATIONS (2021)

Add to Collection
Article Engineering, Environmental

Formation and anticorrosion properties of superhydrophobic zinc coatings on steel

N. A. Polyakov et al.

Summary: The study found that superhydrophobic zinc coatings can be formed by depositing zinc in a sulfate-acetate solution and treating with stearic acid, optimizing the electrodeposition conditions to maintain superhydrophobic properties under salt spray conditions, and enhancing superhydrophobic properties with ultrasonic treatment.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Article Chemistry, Physical

Overcoming coffee-stain effect by particle suspension marble evaporation

Andrew Terhemen Tyowua et al.

Summary: This study discovered that encapsulating particle suspensions in hydrophobic particles before evaporation can effectively prevent coffee-stain formation, instead of producing spot-like particle deposits.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection
Article Thermodynamics

Bouncing drop impingement on heated hydrophobic surfaces

N. Samkhaniani et al.

Summary: In this study, a diffuse interface phase-field method was extended for two-phase flow simulations, including interfacial heat transfer and the thermal Marangoni effect. The governing equations, stemmed from variational consideration of total free energy, consist of coupled Cahn-Hilliard Navier-Stokes equations with a temperature dependent mixing energy term. The developed code in the OpenFOAM framework was validated for various test cases, showing good agreement with experimental results.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection
Review Thermodynamics

Heat transfer during multiple droplet impingement and spray cooling: Review and prospects for enhanced surfaces

J. D. Benther et al.

Summary: This article discusses the application of spray cooling and multiple droplet impingement heat transfer technology in improving spray cooling efficiency. Research shows that enhanced surfaces can enhance the outcome of spray cooling, but further studies are still needed to investigate the effects under different conditions.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection
Article Thermodynamics

Droplet evaporation characteristics on heated superhydrophobic surface subjected to airflow

Ning Lyu et al.

Summary: A novel frost suppression method for air source heat pumps is proposed in this study, where the system operates frost-free by vaporizing condensed droplets before freezing. A multiphase flow model based on VOF method is utilized to investigate the evaporation characteristics and survival time of water droplets on a heated superhydrophobic surface under airflow. Experimental results show that the prediction error for droplet survival time is within 8%.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection
Article Mechanics

Competing Marangoni and Rayleigh convection in evaporating binary droplets

Christian Diddens et al.

Summary: Recent studies have shown that in evaporating binary sessile and pendant droplets, gravity and natural convection can be the dominant driving mechanisms for flow. A quasi-stationary model has been derived and validated to predict the prevalence and intriguing interaction of Rayleigh and/or Marangoni convection based on a phase diagram for the flow field expressed in terms of the Rayleigh and Marangoni numbers.

JOURNAL OF FLUID MECHANICS (2021)

Add to Collection
Article Metallurgy & Metallurgical Engineering

Corrosion and Kinetics of Electrode Processes on Steel with Hydrophobic Coating in Chloride Environment and with the Addition of Hydrogen Sulfide

V. Vigdorovich et al.

Summary: The corrosion and kinetics of electrode processes on St3 steel with a superhydrophobic coating in a chloride medium were studied, showing a significant reduction in corrosion rate with the superhydrophobic coating, especially in the presence of hydrogen sulfide. The cathodic process decreased and the anodic process increased in the presence of hydrogen sulfide, leading to a corrosion process controlled by the anode.

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2021)

Add to Collection
Article Materials Science, Coatings & Films

Enhancement of self-cleaning properties and durability of super-hydrophobic carbon nitride nanostructures by post-annealing treatment

Shafarina Azlinda Ahmad Kamal et al.

Summary: The study found that increasing the annealing temperature can enhance the water repellence of carbon nitride nanostructures, significantly increasing the contact angle from 102.8° to 158.1° and greatly reducing the contact angle hysteresis. The film annealed at 700°C showed excellent durability performance, maintaining its super-hydrophobic behavior even after being subjected to more than 10 water droplets.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection
Article Mechanics

Reversed role of liquid viscosity on drop splash

Haixiang Zhang et al.

Summary: The influence of liquid viscosity on the splashing behavior of a drop impacting a smooth surface was investigated. It was found that liquid viscosity plays a reversed role on the drop splash, promoting splash in low-viscosity cases and suppressing splash in high-viscosity cases. The increase in liquid viscosity contributes to a lower splashing angle and influences both aerodynamic and viscous forces, resulting in a proposed splash criterion for smooth surfaces.

PHYSICS OF FLUIDS (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Optimization Strategy to Inhibit Droplets Rebound on PathogenModified Hydrophobic Surfaces

Lifei He et al.

Summary: Adding surfactants to pesticide spray can reduce the bounce and splash of pesticide droplets, increase their adhesion and retention on cucumber leaves, and decrease the ejection of powdery mildew spores.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Anti-Icing Performance of Superhydrophobic Surface with Square-Ring Structure Prepared by Nanosecond Laser

Yanling Wan et al.

Summary: A square-ring structure array is created on an aluminum alloy surface using nanosecond laser processing, resulting in a durable and anti-icing superhydrophobic surface. The surfaces exhibit high contact angles and low sliding angles at both 15 degrees C and -15 degrees C, enabling water droplets to slide off before freezing. The surfaces also demonstrate good anti-icing performance, with extended icing delay times and reduced icing quantities at -15 degrees C, indicating stable wettability and performance.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Evaporation of colloidal droplets from aluminum-magnesium alloy surfaces after laser-texturing and mechanical processing

K. A. Batishcheva et al.

Summary: This study analyzed the effect of evaporation-induced self-assembly on solid surfaces and the impact of different processing methods on the formation of dried patterns, providing new insights into understanding the formation of dried patterns.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection
Article Materials Science, Coatings & Films

Influence of roughness on polar and dispersed components of surface free energy and wettability properties of copper and steel surfaces

G. Kuznetsov et al.

Summary: This study investigates the effects of hardware abrasive processing on the texture, surface free energy, and wettability of copper and steel surfaces. It was found that the use of abrasive material with an average grit size of up to 100 mu m can significantly change surface roughness and modify the polar component in the surface free energy. The study demonstrates that abrasive processing directly influences wettability properties and allows for a wide range of contact angles to be achieved on both copper and steel surfaces.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Antimicrobial Activity and Degradation of Superhydrophobic Magnesium Substrates in Bacterial Media

Alexandre M. Emelyanenko et al.

Summary: The study investigates the interaction between superhydrophobic coatings on magnesium-based alloys and bacterial dispersions, showing enhanced corrosion protection and inhibition of magnesium substrate degradation. Immersion of such coatings in bacterial dispersions leads to notable changes in sample morphology and the formation of biofilms and sodium polyphosphate films, ultimately providing a barrier against magnesium dissolution. Electrochemical data indicates a high level of anticorrosion protection for superhydrophobic samples in continuous contact with corrosive bacterial dispersions for 48 hours.

METALS (2021)

Add to Collection
Review Chemistry, Physical

Superhydrophobic Surfaces: Insights from Theory and Experiment

Sumit Parvate et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2020)

Add to Collection
Article Thermodynamics

Experimental investigation of closed loop spray cooling with micro- and hybrid micro-/nano-engineered surfaces

Rui-Na Xu et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection
Article Thermodynamics

A computational study on air entrapment and its effect on convective heat transfer during droplet impact on a substrate

Rajesh Kumar et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Roles of chemistry modification for laser textured metal alloys to achieve extreme surface wetting behaviors

Avik Samanta et al.

MATERIALS & DESIGN (2020)

Add to Collection
Article Thermodynamics

Controlled 3D nanoparticle deposition by drying of colloidal suspension in designed thin micro-porous architectures

Feifei Qin et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection
Article Materials Science, Coatings & Films

Prediction of water droplet behavior on aluminum alloy surfaces modified by nanosecond laser pulses

D. Zaitsev et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection
Article Chemistry, Physical

Effect of surface physico-chemico-biological modifications of titanium on critical and theoretical surface free energy

Hiroyuki Miyajima et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection
Article Chemistry, Physical

Anti-corrosion behaviour of superwetting structured surfaces on Mg-9Al-1Zn magnesium alloy

Dongsong Wei et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection
Article Multidisciplinary Sciences

Facile approach to develop anti-corrosive superhydrophobic aluminium with high mechanical, chemical and thermal durability

Balraj Krishnan Tudu et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2019)

Add to Collection
Article Chemistry, Physical

Droplet Impact on the Super-Hydrophobic Surface with Micro-Pillar Arrays Fabricated by Hybrid Laser Ablation and Silanization Process

Zhenyan Xia et al.

MATERIALS (2019)

Add to Collection
Article Thermodynamics

Direct numerical simulations of sessile droplet evaporation on a heated horizontal surface surrounded by moist air

Qing Guo et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection
Article Thermodynamics

Effects of wettability on explosive boiling of nanoscale liquid films: Whether the classical nucleation theory fails or not?

Yan-Hong Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection
Article Nanoscience & Nanotechnology

One-Step Fabrication of Robust Superhydrophobic Steel Surfaces with Mechanical Durability, Thermal Stability, and Anti-icing Function

Haipeng Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Multidisciplinary Sciences

Surface fitting methods for modelling leaf surface from scanned data

M. N. Oqielat

JOURNAL OF KING SAUD UNIVERSITY SCIENCE (2019)

Add to Collection
Article Materials Science, Composites

Plasmon-mediated photothermal and superhydrophobic TiN-PTFE film for anti-icing/deicing applications

Lingwei Ma et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection
Article Materials Science, Coatings & Films

Superhydrophobicity on aluminum through reactive-etching and TEOS/GPTMS/nano-Al2O3 silane-based nanocomposite coating

M. Khodaei et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection
Article Chemistry, Physical

Droplet impingement on nano-textured superhydrophobic surface: Experimental and numerical study

Jian Qu et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection
Article Chemistry, Physical

Droplet state and mechanism of contact line movement on laser-textured aluminum alloy surfaces

G. V. Kuznetsov et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Add to Collection
Article Chemistry, Physical

Water drop-surface interactions as the basis for the design of anti-fogging surfaces: Theory, practice, and applications trends

Ivan Rodriguez Duran et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2019)

Add to Collection
Article Engineering, Mechanical

Effect of surface roughness and surface topography on wettability of machined biomaterials using flexible viscoelastic polymer abrasive

Santhosh S. Kumar et al.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Femtosecond-Laser-Produced Underwater Superpolymphobic Nanorippled Surfaces: Repelling Liquid Polymers in Water for Applications of Controlling Polymer Shape and Adhesion

Jiale Yong et al.

ACS APPLIED NANO MATERIALS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Hierarchical Ag/TiO2/Si Forest-Like Nano/Micro-Architectures as Antireflective, Plasmonic Photocatalytic, and Self-Cleaning Coatings

Bhaskar Dudem et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Transparent Polymeric Films Capable of Healing Millimeter-Scale Cuts

Wenjin Guo et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection
Article Engineering, Aerospace

An experimental study of surface wettability effects on dynamic ice accretion process over an UAS propeller model

Yang Liu et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2018)

Add to Collection
Article Thermodynamics

Structured capillary-porous coatings for enhancement of heat transfer at pool boiling

Anton Surtaev et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection
Article Biophysics

Antibacterial activity on superhydrophobic titania nanotube arrays

Kevin Bartlet et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2018)

Add to Collection
Article Computer Science, Interdisciplinary Applications

3D lattice Boltzmann simulation for a saturated liquid droplet at low Ohnesorge numbers impact and breakup on a solid surface surrounded by a saturated vapor

Wei Xiong et al.

COMPUTERS & FLUIDS (2018)

Add to Collection
Article Energy & Fuels

Contact angle and induction time of air bubble on flat coal surface of different roughness

Yuran Chen et al.

FUEL (2018)

Add to Collection
Article Thermodynamics

Microspray quenching on nanotextured surfaces via a piezoelectric atomizer with multiple arrays of micronozzles

Shou-Shing Hsieh et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection
Article Thermodynamics

Numerical investigation of air entrapment in a molten droplet impacting and solidifying on a cold smooth substrate by 3D lattice Boltzmann method

Wei Xiong et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection
Article Thermodynamics

Boiling performance on surfaces with capillary-length-spaced one- and two-dimensional laser-textured patterns

Jure Voglar et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection
Article Mechanics

Thermal atomisation of a liquid drop after impact onto a hot substrate

I. V. Roisman et al.

JOURNAL OF FLUID MECHANICS (2018)

Add to Collection
Article Mechanics

Characterization of superhydrophobic surfaces for drag reduction in turbulent flow

James W. Gose et al.

JOURNAL OF FLUID MECHANICS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Droplet Impact on Anisotropic Superhydrophobic Surfaces

Chunfang Guo et al.

LANGMUIR (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Laser Tailoring the Surface Chemistry and Morphology for Wear, Scale and Corrosion Resistant Superhydrophobic Coatings

Ludmila B. Boinovich et al.

LANGMUIR (2018)

Add to Collection
Article Engineering, Multidisciplinary

Superhydrophobic structures on 316L stainless steel surfaces machined by nanosecond pulsed laser

Yukui Cai et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)

Add to Collection
Review Chemistry, Multidisciplinary

Control of ice nucleation: freezing and antifreeze strategies

Zhisen Zhang et al.

CHEMICAL SOCIETY REVIEWS (2018)

Add to Collection
Article Mechanics

On the maximal spreading of impacting compound drops

H-R Liu et al.

JOURNAL OF FLUID MECHANICS (2018)

Add to Collection
Article Materials Science, Coatings & Films

Fabrication and characterization of superhydrophobic TiO2 nanotube coating by a facile anodic oxidation approach

Xue Zhou et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Controlling the Wetting Properties of Superhydrophobic Titanium Surface Fabricated by UV Nanosecond-Pulsed Laser and Heat Treatment

The-Hung Dinh et al.

NANOMATERIALS (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Superhydrophobic SiC/CNTs Coatings with Photothermal Deicing and Passive Anti-Icing Properties

Guo Jiang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Droplet Bouncing and Breakup during Impact on a Microgrooved Surface

Laxman K. Malla et al.

LANGMUIR (2017)

Add to Collection
Article Chemistry, Physical

Remarkably simple achievement of superhydrophobicity, superhydrophilicity, underwater superoleophobicity, underwater superoleophilicity, underwater superaerophobicity, and underwater superaerophilicity on femtosecond laser ablated PDMS surfaces

Jiale Yong et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection
Article Chemistry, Physical

Anti-icing properties of superhydrophobic stainless steel mesh at subzero temperatures

Agatha Ganne et al.

SURFACE INNOVATIONS (2017)

Add to Collection
Article Nanoscience & Nanotechnology

Oil-Repellent Antifogging Films with Water-Enabled Functional and Structural Healing Ability

Fuchang Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection
Article Chemistry, Physical

Superhydrophobic contoured surfaces created on metal and polymer using a femtosecond laser

Shashank Sarbada et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection
Review Mechanics

Drop Impact on a Solid Surface

C. Josserand et al.

ANNUAL REVIEW OF FLUID MECHANICS, VOL 48 (2016)

Add to Collection
Article Chemistry, Physical

Controllable wettability and morphology of electrodeposited surfaces on zinc substrates

Binyan Zhang et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection
Article Engineering, Environmental

A novel electrodeposition route for fabrication of the superhydrophobic surface with unique self-cleaning, mechanical abrasion and corrosion resistance properties

Huaiyuan Wang et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Add to Collection
Article Chemistry, Physical

Highly Transparent and Water-Enabled Healable Antifogging and Frost-Resisting Films Based on Poly(vinyl alcohol)-Nafion Complexes

Yixuan Li et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection
Article Thermodynamics

Contact vaporization of an impacting drop on heated surfaces

Gangtao Liang et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)

Add to Collection
Article Nanoscience & Nanotechnology

Dropwise Evaporative Cooling of Heated Surfaces with Various Wettability Characteristics Obtained by Nanostructure Modifications

Jian-nan Chen et al.

NANOSCALE RESEARCH LETTERS (2016)

Add to Collection
Article Physics, Multidisciplinary

Dynamic Leidenfrost Effect: Relevant Time and Length Scales

Minori Shirota et al.

PHYSICAL REVIEW LETTERS (2016)

Add to Collection
Article Mechanics

Phase field simulation of a droplet impacting a solid surface

Qian Zhang et al.

PHYSICS OF FLUIDS (2016)

Add to Collection
Article Multidisciplinary Sciences

Self-cleaning of Surfaces: the Role of Surface Wettability and Dust Types

Yun-Yun Quan et al.

Scientific Reports (2016)

Add to Collection
Article Nanoscience & Nanotechnology

Dropwise Evaporative Cooling of Heated Surfaces with Various Wettability Characteristics Obtained by Nanostructure Modifications

Jian-nan Chen et al.

NANOSCALE RESEARCH LETTERS (2016)

Add to Collection
Article Materials Science, Multidisciplinary

Development of stable superhydrophobic coatings on aluminum surface for corrosion-resistant, self-cleaning, and anti-icing applications

Shunli Zheng et al.

MATERIALS & DESIGN (2016)

Add to Collection
Article Nanoscience & Nanotechnology

Surface Modification for Superhydrophilicity and Underwater Superoleophobicity: Applications in Antifog, Underwater Self-Cleaning, and Oil-Water Separation

Kang-Ting Huang et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection
Article Nanoscience & Nanotechnology

Synergistic Effect of Superhydrophobicity and Oxidized Layers on Corrosion Resistance of Aluminum Alloy Surface Textured by Nanosecond Laser Treatment

Ludmila B. Boinovich et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection
Article Chemistry, Physical

Nanosecond laser textured superhydrophobic metallic surfaces and their chemical sensing applications

Duong V. Ta et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection
Article Chemistry, Physical

Biofouling control by superhydrophobic surfaces in shallow euphotic seawater

Michele Ferrari et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2015)

Add to Collection
Article Mechanics

Phase diagram for droplet impact on superheated surfaces

Hendrik J. J. Staat et al.

JOURNAL OF FLUID MECHANICS (2015)

Add to Collection
Review Computer Science, Hardware & Architecture

Integration of Cognitive Radio Technology with unmanned aerial vehicles: Issues, opportunities, and future research challenges

Yasir Saleem et al.

JOURNAL OF NETWORK AND COMPUTER APPLICATIONS (2015)

Add to Collection
Article Chemistry, Multidisciplinary

Modeling of Droplet Evaporation on Superhydrophobic Surfaces

Heitor C. M. Fernandes et al.

LANGMUIR (2015)

Add to Collection
Review Biotechnology & Applied Microbiology

Micro/nano-structured superhydrophobic surfaces in the biomedical field: part I: basic concepts and biomimetic approaches

Ana Catarina Lima et al.

NANOMEDICINE (2015)

Add to Collection
Article Mechanics

Drop spreading at the impact in the Leidenfrost boiling

G. Castanet et al.

PHYSICS OF FLUIDS (2015)

Add to Collection
Article Chemistry, Physical

Design of a robust superhydrophobic surface: thermodynamic and kinetic analysis

Anjishnu Sarkar et al.

SOFT MATTER (2015)

Add to Collection
Article Chemistry, Physical

Fingering patterns during droplet impact on heated surfaces

Mohammad Khavari et al.

Soft Matter (2015)

Add to Collection
Article Chemistry, Physical

The icephobic performance of alkyl-grafted aluminum surfaces

S. A. Kulinich et al.

SOFT MATTER (2015)

Add to Collection
Article Chemistry, Physical

A mechanically bendable superhydrophobic steel surface with self-cleaning and corrosion-resistant properties

Sanjay S. Latthe et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection
Article Materials Science, Multidisciplinary

Superhydrophobic carbon nanotube/silicon carbide nanowire nanocomposites

Hailing Yu et al.

MATERIALS & DESIGN (2015)

Add to Collection
Article Nanoscience & Nanotechnology

Superhydrophobic Nanocomposite Surface Topography and Ice Adhesion

Alexander Davis et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection
Article Physics, Applied

Drop splashing on a rough surface: How surface morphology affects splashing threshold

Hyungmo Kim et al.

APPLIED PHYSICS LETTERS (2014)

Add to Collection
Article Chemistry, Physical

Preparation of stable superhydrophobic film on stainless steel substrate by a combined approach using electrodeposition and fluorinated modification

Junsheng Liang et al.

APPLIED SURFACE SCIENCE (2014)

Add to Collection
Article Thermodynamics

Nanofluid pendant droplet evaporation: Experiments and modeling

William J. Gerken et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Add to Collection
Article Thermodynamics

Effect of liquid-vapor interface area on the evaporation rate of small sessile droplets

Dinghua Hu et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)

Add to Collection
Article Computer Science, Interdisciplinary Applications

An efficient scheme for a phase field model for the moving contact line problem with variable density and viscosity

Min Gao et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2014)

Add to Collection
Article Physics, Multidisciplinary

Pancake bouncing on superhydrophobic surfaces

Yahua Liu et al.

NATURE PHYSICS (2014)

Add to Collection
Article Physics, Fluids & Plasmas

Droplet evaporation on heated hydrophobic and superhydrophobic surfaces

Susmita Dash et al.

PHYSICAL REVIEW E (2014)

Add to Collection
Article Physics, Multidisciplinary

Experiments of Drops Impacting a Smooth Solid Surface: A Model of the Critical Impact Speed for Drop Splashing

Guillaume Riboux et al.

PHYSICAL REVIEW LETTERS (2014)

Add to Collection
Article Chemistry, Physical

A simple and scalable approach towards the preparation of superhydrophobic surfaces - importance of the surface roughness skewness

Nicolas D. Boscher et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection
Article Thermodynamics

Boiling heat transfer on superhydrophilic, superhydrophobic, and superbiphilic surfaces

Amy Rachel Betz et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Add to Collection
Article Chemistry, Physical

Fabrication of Superhydrophobic and Oleophobic Surfaces with Overhang Structure by Reverse Nanoimprint Lithography

Hak-Jong Choi et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Add to Collection
Article Chemistry, Multidisciplinary

Droplet Evaporation Dynamics on a Superhydrophobic Surface with Negligible Hysteresis

Susmita Dash et al.

LANGMUIR (2013)

Add to Collection
Article Chemistry, Multidisciplinary

Assessment of Water Droplet Evaporation Mechanisms on Hydrophobic and Superhydrophobic Substrates

Zhenhai Pan et al.

LANGMUIR (2013)

Add to Collection
Article Multidisciplinary Sciences

Reducing the contact time of a bouncing drop

James C. Bird et al.

NATURE (2013)

Add to Collection
Article Nanoscience & Nanotechnology

A Simple Way To Achieve Pattern-Dependent Tunable Adhesion in Superhydrophobic Surfaces by a Femtosecond Laser

Dongshi Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2012)

Add to Collection
Article Mechanics

Superhydrophobic surfaces: From the lotus leaf to the submarine

Mohamed A. Samaha et al.

COMPTES RENDUS MECANIQUE (2012)

Add to Collection
Article Materials Science, Multidisciplinary

Corrosion resistance of composite coatings on low-carbon steel containing hydrophobic and superhydrophobic layers in combination with oxide sublayers

L. B. Boinovich et al.

CORROSION SCIENCE (2012)

Add to Collection
Article Dentistry, Oral Surgery & Medicine

Effects of silane coupling agents and solutions of different polarity on PMMA bonding to alumina

Pisaisit Chaijareenont et al.

DENTAL MATERIALS JOURNAL (2012)

Add to Collection
Article Computer Science, Interdisciplinary Applications

A gradient stable scheme for a phase field model for the moving contact line problem

Min Gao et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2012)

Add to Collection
Article Chemistry, Physical

Superhydrophilic-superoleophobic coatings

Jin Yang et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Add to Collection
Article Chemistry, Multidisciplinary

How To Prepare Reproducible, Homogeneous, and Hydrolytically Stable Aminosilane-Derived Layers on Silica

Mojun Zhu et al.

LANGMUIR (2012)

Add to Collection
Article Chemistry, Multidisciplinary

Design Parameters for a Robust Superhydrophobic Electrospun Nonwoven Mat

Amit Rawal

LANGMUIR (2012)

Add to Collection
Article Multidisciplinary Sciences

Stabilization of Leidenfrost vapour layer by textured superhydrophobic surfaces

Ivan U. Vakarelski et al.

NATURE (2012)

Add to Collection
Article Materials Science, Multidisciplinary

Fabrication of patterned TiO2 thin film by a wet process

Jin-Ho Kim et al.

METALS AND MATERIALS INTERNATIONAL (2012)

Add to Collection
Article Polymer Science

Surface tension of viscous biopolymer solutions measured using the du Nouy ring method and the drop weight methods

Boon-Beng Lee et al.

POLYMER BULLETIN (2012)

Add to Collection
Article Chemistry, Multidisciplinary

One-Step Fabrication of Nanostructured Ni Film with Lotus Effect from Deep Eutectic Solvent

Changdong Gu et al.

LANGMUIR (2011)

Add to Collection
Article Chemistry, Multidisciplinary

Are Superhydrophobic Surfaces Best for Icephobicity?

Stefan Jung et al.

LANGMUIR (2011)

Add to Collection
Article Chemistry, Physical

Impact of chain length, temperature, and humidity on the growth of long alkyltrichlorosilane self-assembled monolayers

Simon Desbief et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)

Add to Collection
Article Computer Science, Interdisciplinary Applications

A front-tracking method for computational modeling of impact and spreading of viscous droplets on solid walls

Metin Muradoglu et al.

COMPUTERS & FLUIDS (2010)

Add to Collection
Article Chemistry, Physical

Dynamical superhydrophobicity

Mathilde Reyssat et al.

FARADAY DISCUSSIONS (2010)

Add to Collection
Article Energy & Fuels

Pore-scale modeling: Effects of wettability on waterflood oil recovery

Xiucai Zhao et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2010)

Add to Collection
Article Chemistry, Multidisciplinary

How Micropatterns and Air Pressure Affect Splashing on Surfaces

Peichun Tsai et al.

LANGMUIR (2010)

Add to Collection
Article Chemistry, Multidisciplinary

Wrinkled, Dual-Scale Structures of Diamond-Like Carbon (DLC) for Superhydrophobicity

Yudi Rahmawan et al.

LANGMUIR (2010)

Add to Collection
Article Engineering, Multidisciplinary

A hybrid Clough-Tocher method for surface fitting with application to leaf data

M. N. Oqielat et al.

APPLIED MATHEMATICAL MODELLING (2009)

Add to Collection
Article Thermodynamics

Comparison of measured and modelled droplet-hot wall interactions

D. Chatzikyriakou et al.

APPLIED THERMAL ENGINEERING (2009)

Add to Collection
Article Engineering, Electrical & Electronic

Surface Wettability of Nanostructured Zinc Oxide Films

Jie Han et al.

JOURNAL OF ELECTRONIC MATERIALS (2009)

Add to Collection
Article Mechanics

Marangoni convection in droplets on superhydrophobic surfaces

Daniel Tam et al.

JOURNAL OF FLUID MECHANICS (2009)

Add to Collection
Article Chemistry, Multidisciplinary

Surfactant-Induced Modification of Low Weber Number Droplet Impact Dynamics

Kalpak P. Gatne et al.

LANGMUIR (2009)

Add to Collection
Article Chemistry, Multidisciplinary

How Wetting Hysteresis Influences Ice Adhesion Strength on Superhydrophobic Surfaces

S. A. Kulinich et al.

LANGMUIR (2009)

Add to Collection
Article Chemistry, Multidisciplinary

Anti-Icing Superhydrophobic Coatings

Liangliang Cao et al.

LANGMUIR (2009)

Add to Collection
Article Materials Science, Multidisciplinary

The microstructure and wettability of the TiOx films synthesized by reactive DC magnetron sputtering

Zeng Lin et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2009)

Add to Collection
Article Mechanics

Numerical studies of the influence of the dynamic contact angle on a droplet impacting on a dry surface

Kensuke Yokoi et al.

PHYSICS OF FLUIDS (2009)

Add to Collection
Article Mechanics

Inertia dominated drop collisions. II. An analytical solution of the Navier-Stokes equations for a spreading viscous film

Ilia V. Roisman

PHYSICS OF FLUIDS (2009)

Add to Collection
Review Materials Science, Multidisciplinary

Multifunctional surface structures of plants: An inspiration for biomimetics

Kerstin Koch et al.

PROGRESS IN MATERIALS SCIENCE (2009)

Add to Collection
Article Materials Science, Multidisciplinary

Wetting and Roughness

David Quéré

Annual Review of Materials Research (2008)

Add to Collection
Article Nanoscience & Nanotechnology

Adherence and bouncing of liquid droplets impacting on dry surfaces

D. Caviezel et al.

MICROFLUIDICS AND NANOFLUIDICS (2008)

Add to Collection
Article Chemistry, Multidisciplinary

Electrochemical Synthesis of Silver Polyhedrons and Dendritic Films with Superhydrophobic Surfaces

Changdong Gu et al.

LANGMUIR (2008)

Add to Collection
Article Chemistry, Multidisciplinary

Petal effect: A superhydrophobic state with high adhesive force

Lin Feng et al.

LANGMUIR (2008)

Add to Collection
Review Chemistry, Physical

Diversity of structure, morphology and wetting of plant surfaces

Kerstin Koch et al.

SOFT MATTER (2008)

Add to Collection
Article Engineering, Chemical

Numerical simulations of drop impact and spreading on horizontal and inclined surfaces

Siddhartha F. Lunkad et al.

CHEMICAL ENGINEERING SCIENCE (2007)

Add to Collection
Article Chemistry, Multidisciplinary

Self-cleaning and anti-fog surfaces via stimuli-responsive polymer brushes

John A. Howarter et al.

ADVANCED MATERIALS (2007)

Add to Collection
Article Mechanics

Diffuse-interface modelling of droplet impact

V. V. Khatavkar et al.

JOURNAL OF FLUID MECHANICS (2007)

Add to Collection
Article Chemistry, Multidisciplinary

Superior water repellency of water strider legs with hierarchical structures: Experiments and analysis

Xi-Qiao Feng et al.

LANGMUIR (2007)

Add to Collection
Article Engineering, Electrical & Electronic

Tuning wettability and getting superhydrophobic surface by controlling surface roughness with well-designed microstructures

Liang Zhu et al.

SENSORS AND ACTUATORS A-PHYSICAL (2006)

Add to Collection
Article Engineering, Mechanical

The splash/non-splash boundary upon a dry surface and thin fluid film

RL Vander Wal et al.

EXPERIMENTS IN FLUIDS (2006)

Add to Collection
Article Mechanics

Retraction dynamics of aqueous drops upon impact on non-wetting surfaces

D Bartolo et al.

JOURNAL OF FLUID MECHANICS (2005)

Add to Collection
Article Chemistry, Multidisciplinary

Superhydrophobicity and superhydrophilicity of regular nanopatterns

E Martines et al.

NANO LETTERS (2005)

Add to Collection
Article Physics, Multidisciplinary

Drop splashing on a dry smooth surface

L Xu et al.

PHYSICAL REVIEW LETTERS (2005)

Add to Collection
Article Mechanics

Three-dimensional simulation of impingement of a liquid droplet on a flat surface in the Leidenfrost regime

Y Ge et al.

PHYSICS OF FLUIDS (2005)

Add to Collection
Article Chemistry, Multidisciplinary

On the maximum spreading diameter of impacting droplets on well-prepared solid surfaces

C Ukiwe et al.

LANGMUIR (2005)

Add to Collection
Article Chemistry, Multidisciplinary

Control over the wettability of an aligned carbon nanotube film

T Sun et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2003)

Add to Collection
Article Chemistry, Multidisciplinary

Effect of solvents and concentration on the formation of a self-assembled monolayer of octadecylsiloxane on silicon (001)

N Rozlosnik et al.

LANGMUIR (2003)

Add to Collection
Article Chemistry, Multidisciplinary

Superhydrophobic carbon nanotube forests

KKS Lau et al.

NANO LETTERS (2003)

Add to Collection
Article Chemistry, Multidisciplinary

Structural color and the lotus effect

ZZ Gu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2003)

Add to Collection
Article Engineering, Industrial

Roughness parameters

ES Gadelmawla et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)

Add to Collection
Article Chemistry, Multidisciplinary

A study of alkyl chain conformational changes in self-assembled n-octadecyltrichlorosilane monolayers on fused silica surfaces

Y Liu et al.

LANGMUIR (2001)

Add to Collection
Article Materials Science, Coatings & Films

Use of a sol-gel conversion coating for aluminum corrosion protection

XF Yang et al.

SURFACE & COATINGS TECHNOLOGY (2001)

Add to Collection
Article Physics, Multidisciplinary

Bouncing water drops

D Richard et al.

EUROPHYSICS LETTERS (2000)

Add to Collection
Article Multidisciplinary Sciences

Molecular-scale interface engineering for polymer light-emitting diodes

PKH Ho et al.

NATURE (2000)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.