☆ 4.6 Article

Assessing the Scale Effect on Bearing Capacity of Undrained Subsoil: Implications for Seismic Resilience of Shallow Foundations

MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Crack-parallel stress effect on fracture energy of plastic hardening polycrystalline metal identified from gap test scaling

A. Abdullah Donmez et al.

Summary: The gap test is a new type of fracture test that was developed in 2020. It uses a notched beam with end supports that have gaps. The test measures how a constant crack-parallel compression stress affects the material's fracture energy and fracture process zone. The importance rating for this study is 8 out of 10.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2023)

Add to Collection

Article Chemistry, Physical

Provision of Rational Parameters for the Turning Mode of Small-Sized Parts Made of the 29 NK Alloy and Beryllium Bronze for Subsequent Thermal Pulse Deburring

Nikita V. Martyushev et al.

Summary: The increase in the use of physical and technical processing methods in deburring technologies is due to the need to work with difficult-to-machine materials and produce small-sized products with hard-to-reach surfaces. This study aims to improve the blade processing of beryllium bronze and the 29 NK alloy for thermal pulse deburring. Surface samples were analyzed and empirical regression dependencies were established to determine rational cutting mode parameters for deburring with the thermal pulse method.

MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Research and TLS (LiDAR) Construction Diagnostics of Clay Brick Masonry Arched Stairs

Rafal Nowak et al.

Summary: The study presents a TLS diagnostic of a clay brick masonry arched staircase in a historic building. Experimental models were made to analyze the influence of the masonry steps on the load capacity and stiffness of the run structure. The results showed that the treads above the masonry arch were the key element responsible for the load-bearing capacity and stiffness of this type of stair flights.

MATERIALS (2022)

Add to Collection

Article Engineering, Mechanical

A new ductile failure criterion for micro/meso scale forming limit prediction of metal foils considering size effect and free surface roughening

Lihuang Zheng et al.

Summary: A new ductile failure criterion is proposed in this paper to accurately predict the forming limits of metal foils affected by size effect. Experimental results and comparative research demonstrate the prediction capability of the proposed failure criterion in micro/meso scale forming processes.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Energy & Fuels

Size effects in the uniaxial compressive properties of 3D printed models of rocks: an experimental investigation

Hao Wu et al.

Summary: Transparent physical models fabricated using 3D printing technology are used to study the evolution of internal stress and deformation fields of rocks, providing quantitative insights into the intrinsic mechanisms of rock failure. This study investigates the size effect in 3D printed models of fractured and porous rocks, and reveals the influence of internal discontinuous structural features on the mechanical behavior of the model.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Mechanics

The scale effect in composites: An explanation physically based on the different mechanisms of damage involved in failure

F. Paris et al.

Summary: The scale effect in composites is influenced by the thickness of the lamina, affecting the strength of the laminate. This study provides a physically based explanation of the scale effect by identifying two different failure mechanisms, progressive and explosive, in the 90-degree lamina. Understanding these mechanisms is crucial for identifying the parameters involved in failure initiation.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Applying the Drucker-Prager Failure Criterion for Representing Soil Behavior using Smoothed Particle Hydrodynamics

Erly Bahsan et al.

Summary: SPH is used to model soil deformation, Drucker-Prager model is implemented to simulate soil behavior, preliminary results show potential but improvements are needed.

INTERNATIONAL JOURNAL OF TECHNOLOGY (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

SPH-DEM simulations of saturated granular soils liquefaction incorporating particles of irregular shape

Saman Farzi Sizkow et al.

Summary: A coupled SPH and DEM scheme is used to study liquefaction of saturated granular deposits during strong seismic ground motions. Results indicate that excess pore fluid pressure increases due to contraction of pore spaces, leading to significant loss of interparticle contacts and degradation of soil strength and stiffness.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Article Geosciences, Multidisciplinary

Source modelling and stress transfer scenarios of the October 30, 2020 Samos earthquake: seismotectonic implications

Sotiris Sboras et al.

Summary: This study aims to define the seismic source of the mainshock by integrating seismological and geodetic data, as well as field observations, identifying a N-dipping normal fault. The spatiotemporal evolution of the aftershock sequence was then studied, revealing the involvement of multiple faults beyond the Kaystrios fault.

TURKISH JOURNAL OF EARTH SCIENCES (2021)

Add to Collection

Article Engineering, Geological

Size-dependent Behaviour of Weak Intact Rocks

Hao Zhai et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Add to Collection

Proceedings Paper Architecture

The Influence of Nanosilica on Unconfined Compressive Strength of Frost-Susceptible Soil

Zofia Zieba et al.

4TH WORLD MULTIDISCIPLINARY CIVIL ENGINEERING-ARCHITECTURE-URBAN PLANNING SYMPOSIUM - WMCAUS (2019)

Add to Collection

Article Energy & Fuels

The influence of mean grain size on unconfined compressive strength of weakly consolidated reservoir sandstones

Hadi Atapour et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Discrete numerical modeling of loose soil with spherical particles and interparticle rolling friction

Rodaina Aboul Hosn et al.

GRANULAR MATTER (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Discrete numerical modeling of loose soil with spherical particles and interparticle rolling friction

Rodaina Aboul Hosn et al.

GRANULAR MATTER (2017)

Add to Collection

Article Geosciences, Multidisciplinary

A practical method for estimating maximum shear modulus of cemented sands using unconfined compressive strength

Hyunwook Choo et al.

JOURNAL OF APPLIED GEOPHYSICS (2017)

Add to Collection

Article Engineering, Geological

Analysis of size effects on the geomechanical parameters of intact granite samples under unconfined conditions

J. Quinones et al.

ACTA GEOTECHNICA (2017)

Add to Collection

Article Geosciences, Multidisciplinary

Evaluating models of Coulomb stress transfer: Is variable fault geometry important?

Zoe K. Mildon et al.

GEOPHYSICAL RESEARCH LETTERS (2016)

Add to Collection

Article Engineering, Geological

Unified Size-Effect Law for Intact Rock

Hossein Masoumi et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2016)

Add to Collection

Proceedings Paper Construction & Building Technology

Determination of the Influence of Cylindrical Samples Dimensions on the Evaluation of Concrete and Wall Mortar Strength Using Ultrasound Method

Stawiski Bohdan et al.

MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES (2013)

Add to Collection

Article Engineering, Civil

Study of scale effect in an internal erosion mechanism: centrifuge model and energy analysis

Didier Marot et al.

EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2012)

Add to Collection

Article Geosciences, Multidisciplinary

Rate/state Coulomb stress transfer model for the CSEP Japan seismicity forecast

Shinji Toda et al.

EARTH PLANETS AND SPACE (2011)

Add to Collection

Article Construction & Building Technology

Modelling the scale effect of granular media for strength and bearing capacity

Ching S. Chang et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2010)

Add to Collection

Article Engineering, Geological

Effect of specimen size on unconfined compressive strength properties of natural deposits

Takaharu Shogaki

SOILS AND FOUNDATIONS (2007)

Add to Collection

Article Engineering, Civil

Modeling infiltration with approximate solutions to Richard's equation

SE Serrano

JOURNAL OF HYDROLOGIC ENGINEERING (2004)

Add to Collection

Article Engineering, Geological

Numerical simulations of deviatoric shear deformation of granular media

C Thornton

GEOTECHNIQUE (2000)

Add to Collection

Article Mechanics

Size effect

ZP Bazant

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)

Add to Collection

Article Mechanics

Plasticity at the micron scale

JW Hutchinson

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.