☆ 4.8 Article

Highly Efficient and Air-Stable Inorganic Perovskite Solar Cells Enabled by Polylactic Acid Modification

ADVANCED ENERGY MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Manipulating the Crystallization and Phase Transition for High-Performance CsPbI2Br Solar Cells

Shiqi Shan et al.

Summary: This study proposes a combined method of nonstoichiometric composition and post-cation exchange to improve the morphology and phase stability of CsPbI2Br IPSCs, leading to a record efficiency of 17.80%. Excessive PbI2 regulates the film crystallization, resulting in a high-quality perovskite film with enlarged grains. Additionally, cation exchange induced by depositing formamidinium iodide further improves the device efficiency and stability.

ADVANCED ENERGY MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Efficient inorganic perovskite solar cells made by drop-coating in ambient air

Hanrui Xiao et al.

Summary: An additive-assisted airflow drying (AAD) method is reported to fabricate mixed-halide inorganic perovskite films in ambient air, achieving pinhole-free films with low defect density. CsPbI2.25Br0.75 PSCs show an improved efficiency of 18.49%, the highest for wide-bandgap (>1.8 eV) inorganic PSCs. PSCs made under moderate relative humidity (40-50%) achieve an efficiency of 17.08%. Additionally, CsPbI2Br and CsPbIBr2 PSCs achieve PCEs of 17.39% and 11.54% respectively, among the best for CsPbI2Br and CsPbIBr2 PSCs. This work provides a convenient and efficient method for fabricating efficient inorganic PSCs in ambient air.

NANO ENERGY (2023)

Add to Collection

Article Energy & Fuels

Cs1-xDMAxPbI3 versus CsPbI3 for Perovskite Solar Cells

Mengqi Liu et al.

Summary: Inorganic CsPbI3 perovskite solar cells show promise for tandem solar cells due to their excellent thermal stability and appropriate bandgap. The common method of using organic additives for intermediate phase engineering has been questioned regarding the full conversion to pure CsPbI3 phase. By studying the effect of annealing temperature, it is demonstrated that significant organic residues remain in the films when using the standard recipes of DMA(+)-assisted synthesis. However, increasing the annealing temperature to 340 degrees C eliminates the organic residues and leads to improved properties.

SOLAR RRL (2023)

Add to Collection

Review Materials Science, Multidisciplinary

Carbon-based perovskite solar cells with electron and hole-transporting/-blocking layers

Wenjin Yu et al.

Summary: This article reviews the development of carbon-electrode-based perovskite solar cells (CPSCs) and highlights the importance of n-i-p architecture. Challenges still exist in CPSCs in the n-i-p architecture, and new carbon materials and manufacturing methods need to be proposed. Improvements in the hole-transporting layer (HTL) and electron transport layer interfaces, as well as the perovskite active layer, are also necessary to enhance the performance of CPSCs.

MATERIALS FUTURES (2023)

Add to Collection

Article Chemistry, Physical

Stoichiometric Dissolution of Defective CsPbI2Br Surfaces for Inorganic Solar Cells with 17.5% Efficiency

Xinyi Liu et al.

Summary: A chemical etching strategy using ionic liquids is developed to improve the efficiency and environmental resilience of perovskite-based optoelectronic devices.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

A Key 2D Intermediate Phase for Stable High-Efficiency CsPbI2Br Perovskite Solar Cells

Shaomin Yang et al.

Summary: In this study, a low-dimensional intermediate-assisted growth (LDIAG) method was developed to deposit high-quality and stable CsPbI2Br film in ambient atmosphere by introducing imidazole halide (IMX) to control nucleation and growth kinetics. The solar cell efficiency was improved to 17.26% using this method, showcasing potential for high-performance inorganic perovskite solar cells formed under ambient conditions.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Editorial Material Physics, Condensed Matter

Star perovskite materials

Lixiu Zhang et al.

JOURNAL OF SEMICONDUCTORS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Stable High-Efficiency CsPbI2Br Solar Cells by Designed Passivation Using Multifunctional 2D Perovskite

Jie Xu et al.

Summary: In CsPbI2Br perovskite solar cells, the design of glycine halides can improve performance and form a 2D/3D hybrid structure to suppress ion migration, achieving a high power conversion efficiency of 17.26%. Additionally, the efficiency of the encapsulated device only decreases by 14.1% after continuous illumination for 340 hours in ambient conditions, representing one of the most stable inorganic PSCs reported so far.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Interfacial passivation by polylactic acid in perovskite solar cells

Yifang Qi et al.

Summary: The introduction of polylactic acid (PLA) as a passivation layer for perovskite solar cells (PSCs) has been shown to decrease hole defect density and improve the efficiency and stability of the devices.

ORGANIC ELECTRONICS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A low-cost hole transport layer enables CsPbI2Br single-junction and tandem perovskite solar cells with record efficiencies of 17.8 % and 21.4 %

Yuanjia Ding et al.

Summary: Among inorganic perovskites, CsPbI2Br shows great potential for single-junction perovskite solar cells (PSCs) and perovskite/organic tandem solar cells (TSCs) due to its intrinsic thermal stability, suitable bandgap, and superior phase-stability. This study demonstrates that using PTQ10 as a hole transport layer (HTL) for PSCs and an inter-connecting layer (ICL) for TSCs can significantly improve the power conversion efficiencies (PCEs) of CsPbI2Br-based devices. The PTQ10 HTL exhibits better energy level matching with CsPbI2Br and can passivate the perovskite surface, leading to enhanced performance in both PSCs and TSCs.

NANO TODAY (2022)

Add to Collection

Review Chemistry, Physical

Progress and Perspective on Inorganic CsPbI2Br Perovskite Solar Cells

Jing Song et al.

Summary: This progress report summarizes the preparation process and key technologies of CsPbI2Br PSCs, highlighting their important applications in solar cells and future development. The challenges and outlook of CsPbI2Br PSCs are also discussed.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Quantifying the Energy Losses in CsPbI2Br Perovskite Solar Cells with an Open-Circuit Voltage of up to 1.45 V

Jingjing Tian et al.

Summary: CsPbI2Br perovskite solar cells show potential as a top cell for tandem applications, but the open-circuit voltage (V-OC) reported so far is usually below the detailed balance (DB) limit for single-junction PSCs. By adding lead acetate to the CsPbI2Br precursor, losses due to nonradiative recombination can be significantly reduced, leading to improved power conversion efficiency and higher V-OC values.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Inhibiting octahedral tilting for stable CsPbI2Br solar cells

Aili Wang et al.

Summary: The intrinsic phase instability of CsPbI2Br perovskite in solar cells is addressed using BMIMPF6 as an additive to improve phase stability. The study shows that the addition of BMIMPF6 reduces the formation energy of CsPbI2Br, resulting in improved structural stability and charge transfer efficiency. CsPbI2Br solar cells with BMIMPF6 exhibit a PCE of 16.2% and excellent stability under various storage and thermal conditions.

INFOMAT (2022)

Add to Collection

Article Physics, Condensed Matter

Efficient MAPbI3 solar cells made via drop-coating at room temperature

Lixiu Zhang et al.

Summary: The study demonstrated an effective room-temperature drop-coating method for producing high-quality MAPbI(3) films, and analyzed the mechanism for the formation of different film morphologies by real-time observation of crystal growth in different solvents. The perovskite solar cells fabricated using this method exhibited a power conversion efficiency of 18.21% in testing.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Drop-Casting to Make Efficient Perovskite Solar Cells under High Humidity

Chuantian Zuo et al.

Summary: Drop-casting was used to prepare MAPbI(3) films for solar cells, with crystal growth orientation being temperature-dependent. The method shows better tolerance to humidity compared to spin-coating, and the resulting MAPbI(3) solar cells achieved a high PCE under high humidity conditions without antisolvent assistance.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Ionic liquid reducing energy loss and stabilizing CsPbI2Br solar cells

Aili Wang et al.

Summary: The use of the ionic liquid BMIMBF4 can stabilize the CsPbI2Br phase and reduce surface defect density, leading to improvements in perovskite film quality and interfacial charge transport.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Control over Light Soaking Effect in All-Inorganic Perovskite Solar Cells

Xiao Wu et al.

Summary: Light soaking has been found to enhance device performance of CsPb(I1-xBrx)(3) based PSCs by promoting the migration of halide ions, leading to defect passivation and device improvements. Incorporating slightly over-stoichiometric PbI2 in the precursor is proposed as an effective means to suppress the light soaking effect.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Self-spreading produces highly efficient perovskite solar cells

Ling Liu et al.

Summary: A facile drop-coating method was used to make FA(0.88)MA(0.12)PbI(x)Br(3-x) perovskite films, resulting in high-quality films with different bandgaps and efficient solar cells. The champion PCE reached 21.08% for FA(0.88)MA(0.12)PbI(2.85)Br(0.15) cells, demonstrating the potential of this simple fabrication technique.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Dopant-Free Polymer HTM-Based CsPbI2Br Solar Cells with Efficiency Over 17% in Sunlight and 34% in Indoor Light

Zhanglin Guo et al.

Summary: A new polymer, PDTDT, has been developed as a dopant-free hole-transporting material for CsPbI2Br solar cells, which shows high efficiency and stability, making it a potential alternative to popular doped Spiro-OMeTAD and P3HT HTM.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Composition engineering of operationally stable CsPbI2Br perovskite solar cells with a record efficiency over 17%

Teoman Ozturk et al.

Summary: The study presents a method of tuning CsPbI2Br crystallization by incorporating FeCl2 into the perovskite precursor. The introduction of FeCl2 stabilizes the crystal phase, improves efficiency and stability of the photovoltaic devices.

NANO ENERGY (2021)

Add to Collection

Article Energy & Fuels

Hydrophobic Organic Ammonium Halide Modification toward Highly Efficient and Stable CsPbI2.25Br0.75 Solar Cell

Linrui Duan et al.

Summary: In this study, hydrophobic organic ammonium halides were used to modify inorganic cesium lead halide perovskite solar cells, resulting in enhanced efficiency and stability, with the hexadecyltrimethylammonium chloride (CTAC)-modified device showing the best performance. The CTAC modification also led to the formation of a gradient triple anion inorganic perovskite layer, demonstrating better phase stability and excellent efficiency retention after 35 days in N-2 atmosphere.

SOLAR RRL (2021)

Add to Collection

Article Physics, Condensed Matter

Drop-coating produces efficient CsPbI2Br solar cells

Hanrui Xiao et al.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fully Air-Processed Dynamic Hot-Air- Assisted M:CsPbI2Br (M: Eu2+, In3+) for Stable Inorganic Perovskite Solar Cells

Sawanta S. Mali et al.

Summary: By developing a new method to prepare all-inorganic perovskite solar cells with excellent thermal stability, the efficiency and stability of the devices have been significantly improved through the doping of metal ions. The optimized cells show a high power conversion efficiency and robustness, maintaining high efficiency even in high temperature environments.

MATTER (2021)

Add to Collection

Article Physics, Condensed Matter

Inorganic perovskite/organic tandem solar cells with efficiency over 20%

Ling Liu et al.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Unraveling the Impact of Halide Mixing on Crystallization and Phase Evolution in CsPbX3 Perovskite Solar Cells

Junjie Ma et al.

Summary: This study systematically investigates the role of halide elements in the crystallization kinetics, phase-transition, and stabilization mechanism of all-inorganic perovskites. By precise compositional engineering, high-performance ternary halide (I, Br, Cl) all-inorganic PSCs were successfully fabricated. These results provide guidance for a comprehensive understanding of all-inorganic perovskite materials and pave the way for achieving high-performance all-inorganic PSCs.

MATTER (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Controlled n-Doping in Air-Stable CsPbI2Br Perovskite Solar Cells with a Record Efficiency of 16.79%

Yu Han et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring C60 for Efficient Inorganic CsPbI2Br Perovskite Solar Cells and Modules

Chong Liu et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring Component Interaction for Air-Processed Efficient and Stable All-Inorganic Perovskite Photovoltaic

Xiaojuan Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Physical

Lead(II) Propionate Additive and a Dopant-Free Polymer Hole Transport Material for CsPbI2Br Perovskite Solar Cells

Senol Oz et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Composition Engineering of All-Inorganic Perovskite Film for Efficient and Operationally Stable Solar Cells

Jingjing Tian et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Spatial Distribution Recast for Organic Bulk Heterojunctions for High-Performance All-Inorganic Perovskite/Organic Integrated Solar Cells

Weijie Chen et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Surface chelation of cesium halide perovskite by dithiocarbamate for efficient and stable solar cells

Jingjing He et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Crystallisation control of drop-cast quasi-2D/3D perovskite layers for efficient solar cells

Chuantian Zuo et al.

COMMUNICATIONS MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

2D Cs2PbI2Cl2 Nanosheets for Holistic Passivation of Inorganic CsPbI2Br Perovskite Solar Cells for Improved Efficiency and Stability

Shaomin Yang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Intermediate Phase Enhances Inorganic Perovskite and Metal Oxide Interface for Efficient Photovoltaics

Jiahuan Zhang et al.

JOULE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

All-Inorganic CsPbX3 Perovskite Solar Cells: Progress and Prospects

Jingru Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Editorial Material Multidisciplinary Sciences

CsPbI2.25Br0.75 solar cells with 15.9% efficiency

Zhimin Fang et al.

SCIENCE BULLETIN (2019)

Add to Collection

Article Chemistry, Physical

A Novel Anion Doping for Stable CsPbI2Br Perovskite Solar Cells with an Efficiency of 15.56% and an Open Circuit Voltage of 1.30 V

Huan Zhao et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Editorial Material Multidisciplinary Sciences

Interface engineering gifts CsPbI2.25Br0.75 solar cells high performance

Zhimin Fang et al.

SCIENCE BULLETIN (2019)

Add to Collection

Article Chemistry, Multidisciplinary

The Role of Dimethylammonium Iodide in CsPbI3 Perovskite Fabrication: Additive or Dopant?

Yong Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Multidisciplinary Sciences

Ba-induced phase segregation and band gap reduction in mixed-halide inorganic perovskite solar cells

Wanchun Xiang et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Multidisciplinary Sciences

CsPb(IxBr1-x)3 solar cells

Xue Jia et al.

SCIENCE BULLETIN (2019)

Add to Collection

Article Chemistry, Multidisciplinary

CsPbI2.69Br0.31 solar cells from low-temperature fabrication

Shizhe Wang et al.

MATERIALS CHEMISTRY FRONTIERS (2019)

Add to Collection

Article Chemistry, Physical

A Universal Double-Side Passivation for High Open-Circuit Voltage in Perovskite Solar Cells: Role of Carbonyl Groups in Poly(methyl methacrylate)

Jun Peng et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

© Peeref 2019-2024. All rights reserved.