☆ 4.8 Article

In Situ Polymerization of Cross-Linked Perovskite-Polymer Composites for Highly Stable and Efficient Perovskite Solar Cells

ADVANCED ENERGY MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Multidisciplinary Sciences

Orientated crystallization of FA-based perovskite via hydrogen-bonded polymer network for efficient and stable solar cells

Mubai Li et al.

Summary: Incorporating mixed ion is a commonly used strategy to stabilize black-phase formamidinium lead iodide perovskite for high-efficiency solar cells. However, these devices commonly suffer from photoinduced phase segregation and humidity instability. The research found that the mixed halide perovskites generally fail to grow into a homogenous and high-crystalline film due to multiple pathways of crystal nucleation. To address this issue, a multifunctional fluorinated additive was designed to restrain the intermediate phases and promote oriented crystallization of the a-phase of perovskite. The polymerized additives in the perovskite film formation formed a hydrogen-bonded network to stabilize the a-phase and imparted a strongly hydrophobic effect to the film against liquid water.

NATURE COMMUNICATIONS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Molecular Dipole Engineering of Carbonyl Additives for Efficient and Stable Perovskite Solar Cells

Xiaoqing Jiang et al.

Summary: This study systematically investigates the effect of carbonyl additive molecules on defect passivation in perovskite films. It confirms the importance of molecular dipole in enhancing the passivation effect. Additives with strong molecular dipole enhance the efficiency and stability of perovskite solar cells.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

Add to Collection

Article Engineering, Environmental

Bifunctional modified biopolymer for highly efficient and stable perovskite solar cells and modules

He Guo et al.

Summary: In this study, a sulfonic acid group was introduced into poly-L-lysine (PLL) via a one-step ring-opening reaction to modify the interface between the TiO2 and perovskite layers. The sulfonic acid group in PLLS improved the electron transport layer by reducing oxygen vacancies and defects on the surface of the TiO2 film. Additionally, amine groups passivated deep-level defects on the surface of the perovskite, reducing non-radiative recombination. The modified PLLS significantly increased the power conversion efficiency (PCE) of the solar cell devices and showed good stability.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Thermal Dynamic Self-Healing Supramolecular Dopant Towards Efficient and Stable Flexible Perovskite Solar Cells

Chengda Ge et al.

Summary: Efficient flexible perovskite solar cells (FPSCs) with remarkable mechanical stability have been achieved by using a supramolecular adhesive. The adhesive allows for thermal dynamic repair of mechanical damage and improves the leveling property of the precursor solution.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Chemistry, Physical

Revealing the strain-associated physical mechanisms impacting the performance and stability of perovskite solar cells

Wei Meng et al.

Summary: Identification and investigation of strain at buried interfaces in halide perovskite photovoltaics are crucial for directing research on the performance and stability of perovskite solar cells. In this work, we find that interfacial strain causes a gradual shift in the band gap, which is desired for device engineering. However, the increased defect density leads to charge recombination and ion migration, resulting in decreased performance.

JOULE (2022)

Add to Collection

Article Chemistry, Physical

Defect Healing in FAPb(I1-xBrx)(3) Perovskites: Multifunctional Fluorinated Sulfonate Surfactant Anchoring Enables >21% Modules with Improved Operation Stability

Jun Zhu et al.

Summary: Formamidinium lead triiodide-based perovskite solar cells have shown great potential for future photovoltaic technologies. The introduction of heptadecafluorooctanesulfonic acid tetraethylammonium salt (HFSTT) as a modifier has improved the quality and stability of the perovskite films, leading to high power conversion efficiencies and long-term performance.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Efficient, stable formamidinium-cesium perovskite solar cells and minimodules enabled by crystallization regulation

Yiming Li et al.

Summary: Researchers have developed a dual-functional additive that can regulate the crystallization and defects of FA-Cs perovskite film, resulting in improved efficiency and stability of perovskite solar cells.

JOULE (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Interfacial Modification by Low-Temperature Anchoring Surface Uncoordinated Pb for Efficient FAPbI3 Perovskite Solar Cells

Jin Tang et al.

Summary: Surface modification of perovskite film is crucial for improving the performance of solar cells. In this study, PAH was used to modify the surface of the perovskite film, which effectively reduced trap states and promoted charge transfer, leading to enhanced device performance.

ADVANCED SUSTAINABLE SYSTEMS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Multifunctional Molecule Modification toward Efficient Carbon-Based All-Inorganic CsPbIBr2 Perovskite Solar Cells

Xin Wang et al.

Summary: By introducing multifunctional aminoguanidine hemisulfate into the CsPbIBr2 perovskite layer, defects were successfully passivated, leading to a high energy conversion efficiency. Using all-inorganic CsPbIBr2 perovskite solar cells can significantly reduce costs, providing a new direction for development in this field.

ADVANCED SUSTAINABLE SYSTEMS (2022)

Add to Collection

Article Chemistry, Physical

Efficient vertical charge transport in polycrystalline halide perovskites revealed by four-dimensional tracking of charge carriers

Changsoon Cho et al.

Summary: The authors explain the discrepancy between low diffusion coefficients and near-unity charge collection efficiencies in halide perovskite solar cells through the discovery of strong heterogeneity in vertical charge diffusivities in a 3D perovskite film.

NATURE MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Single-Crystal Perovskite Solar Cells Exhibit Close to Half A Millimeter Electron-Diffusion Length

Bekir Turedi et al.

Summary: Single-crystal halide perovskites can maintain high charge-collection efficiency even with increased thickness without external bias. These findings are significant for the application of perovskite devices in optoelectronic applications that require a thick active layer.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Pre-annealing treatment for high-efficiency perovskite solar cells via sequential deposition

Haibing Wang et al.

Summary: Grain boundaries in perovskite solar cells (PSCs) are vulnerable to degradation, but repairing these boundaries is challenging. A pre-annealing treatment can reconstruct the crystallites and grain boundaries, resulting in robust boundaries and improved efficiency and light stability in PSCs.

JOULE (2022)

Add to Collection

Article Multidisciplinary Sciences

Nanoscale localized contacts for high fill factors in polymer-passivated perovskite solar cells

Jun Peng et al.

Summary: This research introduces a nanopatterned electron transport layer that overcomes the trade-off between passivation quality and series resistance in traditional polymer passivation layers. Combining the nanopatterned electron transport layer with a dopant-free hole transport layer improves the efficiency and stability of perovskite solar cells.

SCIENCE (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Review Energy & Fuels

Role and Contribution of Polymeric Additives in Perovskite Solar Cells: Crystal Growth Templates and Grain Boundary Passivators

Kyusun Kim et al.

Summary: Polymers play various roles in perovskite solar cells, including promoting crystal growth and increasing grain size, passivating trap sites, separating charge carriers, protecting films from moisture, and enhancing mechanical resilience. These roles are important for improving device efficiency and stability.

SOLAR RRL (2021)

Add to Collection

Review Chemistry, Physical

Polymer strategies for high-efficiency and stable perovskite solar cells

Sisi Wang et al.

Summary: The comprehensive review of polymer strategy in perovskite solar cells includes categorization, introduction methods, functions, and future research directions aimed at improving efficiency and stability.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional Crosslinking-Enabled Strain-Regulating Crystallization for Stable, Efficient α-FAPbI3-Based Perovskite Solar Cells

Hengkai Zhang et al.

Summary: By introducing the in situ crosslinking-enabled strain-regulating crystallization (CSRC) method with trimethylolpropane triacrylate (TMTA), the tensile strain and grain size of perovskite solar cells (PSCs) based on alpha-Formamidinium lead triiodide (alpha-FAPbI(3)) were successfully regulated, leading to significantly enhanced performance. The CSRC approach not only improved power conversion efficiency (PCE), but also ensured outstanding device stability under both long-term storage and light soaking conditions.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Embedding of Laser-Manufactured Fluorinated Gold Clusters Enabling Stable Perovskite Solar Cells with Efficiency Over 24%

Pengfei Guo et al.

Summary: This study presents a strategy of interfacial embedding hydrophobic fluorinated-gold-clusters (FGCs) to achieve highly efficient and stable PSCs, improving carrier dynamics and enhancing environmental stability.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Apparent Defect Densities in Halide Perovskite Thin Films and Single Crystals

Johanna Siekmann et al.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

All-in-One Lewis Base for Enhanced Precursor and Device Stability in Highly Efficient Perovskite Solar Cells

Jun Zhu et al.

Summary: Researchers have developed a novel diphthalic anhydride-based Lewis base additive that simultaneously addresses the stability challenges of perovskite solar cell precursors and devices. The added Lewis bases show excellent interactions with cations in the precursor and perovskite crystal, improving ambient storage stability and device efficiency. The interaction between the Lewis base and cations also suppresses grain boundary defects, leading to increased efficiency in the target device.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Mitigating the Lead Leakage of High-Performance Perovskite Solar Cells via In Situ Polymerized Networks

Benfang Niu et al.

Summary: By implanting in situ polymerized networks into perovskites, the leakage of lead ions has been successfully mitigated, improving the performance of PSCs.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Tuning halide perovskite energy levels

Laura Canil et al.

Summary: Controlling the energy levels in semiconductors is crucial for optoelectronic applications. This study successfully tuned the work function of halide perovskite semiconductors using self-assembled monolayers of small molecules, demonstrating a versatile approach to adjust energy level alignment at the interface for perovskite-based optoelectronics.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Physical

Recent Progresses on Defect Passivation toward Efficient Perovskite Solar Cells

Feng Gao et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Regulating strain in perovskite thin films through charge-transport layers

Ding-Jiang Xue et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Realistic Methodology for 30% Efficient Perovskite Solar Cells

Chunqing Ma et al.

CHEM (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Efficient Trap Passivation of MAPbI3 via Multifunctional Anchoring for High-Performance and Stable Perovskite Solar Cells

Rabindranath Garai et al.

ADVANCED SUSTAINABLE SYSTEMS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Precise Control of Perovskite Crystallization Kinetics via Sequential A-Site Doping

Minchao Qin et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells

Gwisu Kim et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Fabrication Strategy for Efficient 2D/3D Perovskite Solar Cells Enabled by Diffusion Passivation and Strain Compensation

Cuiling Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

An in situ cross-linked 1D/3D perovskite heterostructure improves the stability of hybrid perovskite solar cells for over 3000 h operation

Ning Yang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Review Chemistry, Physical

A Review on Reducing Grain Boundaries and Morphological Improvement of Perovskite Solar Cells from Methodology and Material-Based Perspectives

Hyuntae Choi et al.

SMALL METHODS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Halide Perovskite Photovoltaics: Background, Status, and Future Prospects

Ajay Kumar Jena et al.

CHEMICAL REVIEWS (2019)

Add to Collection

Article Multidisciplinary Sciences

Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells

Tae-Hee Han et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Multidisciplinary Sciences

Strain engineering in perovskite solar cells and its impacts on carrier dynamics

Cheng Zhu et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability

Hao Wang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Perfection of Perovskite Grain Boundary Passivation by Eu-Porphyrin Complex for Overall-Stable Perovskite Solar Cells

Xiaoxia Feng et al.

ADVANCED SCIENCE (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Imperfections and their passivation in halide perovskite solar cells

Bo Chen et al.

CHEMICAL SOCIETY REVIEWS (2019)

Add to Collection

Article Chemistry, Physical

Controlling Thin-Film Stress and Wrinkling during Perovskite Film Formation

Kevin A. Bush et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Review Engineering, Chemical

Polyacrylamide degradation and its implications in environmental systems

Boya Xiong et al.

NPJ CLEAN WATER (2018)

Add to Collection

Article Chemistry, Physical

Recombination in Perovskite Solar Cells: Significance of Grain Boundaries, Interface Traps, and Defect Ions

Tejas S. Sherkar et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Energy & Fuels

Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations

Xiaopeng Zheng et al.

NATURE ENERGY (2017)

Add to Collection

Article Multidisciplinary Sciences

Strained hybrid perovskite thin films and their impact on the intrinsic stability of perovskite solar cells

Jingjing Zhao et al.

SCIENCE ADVANCES (2017)

Add to Collection

Article Multidisciplinary Sciences

Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells

Lijian Zuo et al.

SCIENCE ADVANCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Thermally Stable MAPbI3 Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 cm2 achieved by Additive Engineering

Yongzhen Wu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Grain boundary dominated ion migration in polycrystalline organic-inorganic halide perovskite films

Yuchuan Shao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation

Jon M. Azpiroz et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Multidisciplinary Sciences

Compositional engineering of perovskite materials for high-performance solar cells

Nam Joong Jeon et al.

NATURE (2015)

Add to Collection

Article Multidisciplinary Sciences

High-efficiency solution-processed perovskite solar cells with millimeter-scale grains

Wanyi Nie et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.