Related references
Note: Only part of the references are listed.
Article
Chemistry, Multidisciplinary
Hanna He et al.
Summary: A 3D-printed electron/ion-flux dual-gradient porous Zn anode is developed to suppress dendrite growth and achieve dendrite-free Zn-ion batteries. The anode establishes dual-gradient electron/ion fluxes by using bottom-rich conductive Ag nanoparticles and zincophilic Ag nanoparticles, enabling bottom-preferential Zn deposition behavior with unimpeded electron transfer and ion diffusion. The design shows excellent performance in terms of low voltage hysteresis and long lifespan, providing a new strategy for next-generation safe and durable Zn-metal batteries.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Physical
Shuang Bai et al.
Summary: Prelithiation is an efficient method for compensating lithium inventory loss in the initial cycle, but research on its effect on interface stabilization for Si-based anodes is limited. This study quantitatively analyzes the interface formed during prelithiation of SiOx and compares it with prelithiation of Si anodes. A mosaic interface containing lithium silicates phases is formed on both prelithiated SiOx and Si anodes, which is fundamentally different from the solid electrolyte interface formed without prelithiation. Prelithiated SiO1.3 anode with a higher ratio of lithium silicates exhibits improved initial coulombic efficiency and cycling retention.
ADVANCED ENERGY MATERIALS
(2023)
Article
Chemistry, Physical
Hanna He et al.
Summary: In this study, an innovative dual-interfering chemistry strategy was proposed to regulate the pyrolysis of pitch, solving the challenge of soft-hard carbon conversion. The optimized pitch-derived hard carbon (PZHC 450-1200) exhibited high capacity, excellent cycle stability, and outperformed most previously reported pitch-derived carbons.
ADVANCED ENERGY MATERIALS
(2023)
Article
Energy & Fuels
Cheng Yang et al.
Summary: The researchers developed a roll-to-roll electrodeposition and transfer-printing system for continuous prelithiation of lithium-ion battery anodes, resulting in improved performance.
Article
Chemistry, Multidisciplinary
Qun Liu et al.
Summary: In this study, a dendrite-free and anti-corrosive semi-liquid Zn anode (SLA) was successfully fabricated based on Zn powder and a thickening agent. The unique anode effectively releases the stress induced by Zn plating, especially under high-current densities, and the dual-conductive medium allows for homogeneous ion flux. This study provides an electrode rheology-based approach to overcome the stability challenge of powder anode.
ADVANCED FUNCTIONAL MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Yang Yang et al.
Summary: A SiO2 reinforced-sodium alginate (SA) hybrid film is designed to regulate the solid-liquid interaction energy and spatial distribution of species in the electric double layer (EDL) near the Zn electrode. The reconfigured EDL ensures dendrite-free Zn deposition and eliminates interface parasitic side reactions.
ADVANCED FUNCTIONAL MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Yong Gao et al.
Summary: A triple-gradient electrode for dendrite-free Zn anode was constructed through a simple mechanical rolling-induced design, which effectively optimized the Zn2+ ion flux and achieved bottom-up deposition behavior, thereby preventing short circuit and improving cycle life and stability.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Hongyu Lu et al.
Summary: In this research, a novel 3D cold-trap environment printing (3DCEP) technology is proposed to fabricate the MXene and Zn-P (3DCEP-MXene/Zn-P) anode with highly ordered arrangement. The 3DCEP-MXene/Zn-P anode demonstrates improved cycling lifespan and coulombic efficiency due to the unique inhibition mechanism and physical confinement effects within the anode. Furthermore, when paired with MXene and Co doped MnHCF cathode via 3DCEP, the full battery shows high cyclic durability with a capacity retention of 95.7% after 1600 cycles.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Shangwen Ling et al.
Summary: Researchers have developed a scalable, flexible, and high-quality fiber lithium-ion battery for wearable applications. By using a fast ink-extrusion technology, an ingenious functional ink was created to fabricate these batteries. The introduced pyrrole-modified reduced graphene oxide plays multiple roles in assembling a sturdy, conductive 3D network, achieving a high content of active materials, and inducing capillary densification. The resulting fiber batteries demonstrate impressive energy densities and mechanical compliance, outperforming other reported extruded fiber batteries.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Zefang Yang et al.
Summary: This study presents the design of a semi-solid zinc slurry anode consisting of zinc powder and zincophilic tin additive, which addresses some issues of zinc metal anodes and has the potential to extend the lifespan of the battery in practical applications.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2023)
Article
Chemistry, Physical
Anxin Li et al.
Summary: Research has found that using zinc powder (Zn-P) as an anode can solve the issues of dendritic growth and parasitic reactions in zinc-ion batteries. By developing a simple method to form an indium metal protective layer on the surface of Zn-P, corrosion and hydrogen evolution can be effectively inhibited, leading to improved cyclability of the battery.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Chemistry, Physical
Changjun Cui et al.
Summary: Zinc batteries have potential for energy storage, but suffer from dendrite growth, corrosion, and hydrogen evolution in water-based electrolytes. By using methanol as a co-solvent in hydrous organic electrolytes, the ionic conductivity can be doubled without sacrificing non-flammability. This electrolyte enables long-term cycling stability, high-rate capability, and low-temperature tolerance for zinc batteries.
ADVANCED ENERGY MATERIALS
(2023)
Article
Chemistry, Physical
Storm W. D. Gourley et al.
Summary: The development of safe, inexpensive, and long service life stationary energy storage infrastructure is crucial for decarbonization in power and automotive sectors. Rechargeable Zn-ion batteries (ZIBs) are considered a promising technology for stationary applications, with low manufacturing costs, high safety, and excellent recyclability. However, challenges such as active material dissolution, lack of realistic performance demonstrations, and the need for manufacturing validation and cost analysis hinder the commercialization efforts of ZIBs.
Article
Chemistry, Physical
Li Zeng et al.
Summary: This study presents the design of a functional 3D printed N-doped carbon host, which effectively addresses the issues in Zn-ion batteries and enables dendrite-free and reversible Zn plating/stripping.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Min Zhang et al.
Summary: In this study, a mixed ionic-electronic conducting scaffold is introduced into Zn-P to fabricate anti-corrosive, flexible, and dendrite-free Zn anodes. The as-prepared Zn-P-based anode exhibits superior electrochemical performance, including long-life cycling stability and high rate capability in practical coin and flexible pouch cells.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Physical
Jianan Gu et al.
Summary: A special liquid metal electrode was designed and fabricated to solve the uncontrollable dendrite issue in zinc anodes, and a flexible zinc-based anode was successfully prepared with high performance and long lifespan, which is of great significance for the development of next-generation zinc-based batteries.
ADVANCED ENERGY MATERIALS
(2022)
Article
Multidisciplinary Sciences
Hanna He et al.
Summary: By introducing 3D printing technology, an ultra-thick composite electrode with excellent reaction kinetics can be constructed to achieve high areal energy density Li-Zn RAHBs.
Article
Chemistry, Physical
Wencheng Du et al.
Summary: Uncontrollable dendrite growth and side reactions hinder the commercial applications of Zinc ion batteries. A practical non-dendrite zinc anode was designed by combining commercial zinc powders and pristine graphene. The anode exhibited low voltage hysteresis, long cycle life, and improved rate performance and energy density.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Physical
Jing Yang et al.
Summary: This study proposes using nicotinamide as an additive to enhance the stability and reversibility of zinc anodes in zinc-iron flow batteries, leading to improved power density, cycling stability, self-discharge resistance, and battery efficiency.
ACS ENERGY LETTERS
(2022)
Article
Chemistry, Multidisciplinary
Xu Liu et al.
Summary: The study demonstrates the effectiveness of ion-affiliative cellulose acetate (CA) coating with Zn(CF3SO3)(2) on Zn anode in suppressing zinc dendrite formation and growth in aqueous electrolytes. The symmetric CAZ@Zn//CAZ@Zn battery shows significantly improved reversible plating/stripping performance compared to bare Zn, while the full cell with optimized Zn anode and NH4V4O10 cathode achieves substantially stable performance, outperforming bare Zn.
Article
Chemistry, Physical
Wencheng Du et al.
Summary: This review systematically summarizes the physical/chemical principles and material design strategies of horizontally oriented zinc (HO-Zn) deposition, discusses the key factors affecting the interfacial electrocrystallization of zinc, and analyzes the recent progress and future challenges in constructing HO-Zn deposition structures.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Cheng Wang et al.
Summary: By developing ZnCl2-based electrolytes, researchers have successfully improved the energy density and cycling life of zinc ion hybrid capacitors. Through the mechanism of desolvation facilitated by chloride ions and the use of a water-in-salt hydrogel electrolyte, they were able to achieve this goal.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Article
Chemistry, Multidisciplinary
Nannan Zhang et al.
Summary: In this study, an ultrathin and uniform MXene layer was assembled on the surface of zinc anodes using an in situ spontaneously reducing/assembling strategy. The integrated MXene layer reduced the zinc nucleation energy barrier and provided a more uniformly distributed electric field, resulting in low voltage hysteresis and excellent cycling stability with dendrite-free behaviors in zinc-ion batteries.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Review
Multidisciplinary Sciences
Jingxu Zheng et al.
Summary: Through precise control of crystal growth, it is possible to manipulate the morphology of Zn electrodeposit. Research indicates that the crystal structure of Zn and the solid-electrolyte interphase play crucial roles in its growth.
Article
Chemistry, Physical
Qing Li et al.
Summary: The study highlights the practical issues that may arise when using Zn foil for studying the stability and dendrite formation behavior of Zn anodes, suggesting that a Zn powder/current collector configuration is more practical. The research also reveals that during the aging process of the Zn-P@Cu electrode, hydrogen forms on the surface of Cu and the Zn-P dissolves, leading to morphological changes, which are attributed to galvanic corrosion between Cu and Zn.
ADVANCED ENERGY MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Xinliang Li et al.
Summary: The study focuses on utilizing Ti(3)C(2)Tx MXene as a redistributor for zinc powder anodes, constructing a stable and highly reversible zinc powder anode to address dendrite growth and polarization issues, improving the cycle life and rate capability of zinc-based full batteries.
Article
Chemistry, Multidisciplinary
Long Qian et al.
Summary: This study introduces a method to enhance the reversibility and electrochemical performance of aqueous Zn-ion batteries by introducing low-cost and green molecules into the electrolyte, which can inhibit the hydration step of Zn2+ and delay the formation of key by-products. In the optimized electrolyte system, the Zn metal anode shows excellent reversible and electrochemical performance, with long lifespan and high capacity retention in Zn-MnO2 batteries.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Huijun Yang et al.
Summary: The zeolite molecular sieve-modified aqueous electrolyte shows reduced water activity and side reactions, leading to improved performance at the electrolyte/electrode interface. This modification results in less hydrogen evolution and corrosion, as well as better cycle life and stability of the battery cells.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Yuzhu Chu et al.
Summary: The in situ construction of a composite SEI mainly composed of Zn-3(PO4)(2) and ZnF2 (ZCS) effectively suppresses Zn dendrite growth and accelerates Zn2+ transference and deposition kinetics in aqueous Zn-ion batteries. By taking advantage of the instability of KPF6 in an aqueous environment, an in situ ZCS is successfully built on the Zn anode through a PF6- anion-induced chemical strategy, showing enhanced reversibility and excellent electrochemical performance. This work not only paves a new way for designing a desirable SEI on the Zn anode, but also may guide the interface engineering of other systems to overcome intrinsic defects in constructing favorable interphases.
ENERGY & ENVIRONMENTAL SCIENCE
(2021)
Article
Polymer Science
Yuan Wang et al.
JOURNAL OF APPLIED POLYMER SCIENCE
(2020)
Article
Chemistry, Multidisciplinary
Pengcheng Liang et al.
ADVANCED FUNCTIONAL MATERIALS
(2020)
Article
Materials Science, Multidisciplinary
Huan-Yan Xu et al.
FRONTIERS OF MATERIALS SCIENCE
(2020)
Article
Chemistry, Multidisciplinary
Hongyun Ma et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2020)
Article
Engineering, Chemical
Huiwen Pang et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
(2020)
Article
Chemistry, Physical
Wencheng Du et al.
Article
Multidisciplinary Sciences
Joseph F. Parker et al.
Article
Chemistry, Physical
Marco De Corato et al.
Article
Chemistry, Multidisciplinary
Yue Jiang et al.
ADVANCED MATERIALS
(2016)
Review
Materials Science, Multidisciplinary
Yihu Song et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES
(2016)
Article
Multidisciplinary Sciences
Conor S. Boland et al.
Article
Mechanics
Yihu Song et al.
JOURNAL OF RHEOLOGY
(2015)
Article
Mechanics
M. M. Villone et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS
(2013)
Article
Mechanics
Stephen Kenney et al.
Article
Chemistry, Multidisciplinary
Yuxi Xu et al.
Article
Polymer Science
Yu-Qiong Xu et al.
JOURNAL OF APPLIED POLYMER SCIENCE
(2009)
Review
Polymer Science
Ph. Cassagnau
Article
Mechanics
Paulo R. de Souza Mendes
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS
(2007)
Article
Physics, Multidisciplinary
Rae M. Robertson et al.
PHYSICAL REVIEW LETTERS
(2007)
