☆ 4.2 Article

Synthesis of doped metal sulfide nanoparticles and their graphene reinforced nanohybrid for Pb(II) detection

ZEITSCHRIFT FUR PHYSIKALISCHE CHEMIE-INTERNATIONAL JOURNAL OF RESEARCH IN PHYSICAL CHEMISTRY & CHEMICAL PHYSICS (2023)

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Electrochemical NO reduction to NH3 on Cu single atom catalyst

Kai Chen et al.

Summary: In this study, single-atomic copper anchored on molybdenum disulfide (Cu-1/MoS2) was found to be a highly efficient catalyst for electrochemical reduction of NO to NH3. Cu-1/MoS2 exhibited an NH3 yield rate of 337.5 mu mol.h(-1).cm(-2) with a Faradaic efficiency of 90.6% at -0.6 V vs. reversible hydrogen electrode (RHE). Experimental and theoretical results revealed that Cu-1-S-3 motifs enable effective activation and hydrogenation of NO, as well as retard proton coverage, leading to high activity and selectivity for NORR.

NANO RESEARCH (2023)

Add to Collection
Article Chemistry, Physical

Atomically Fe-doped MoS2_x with Fe-Mo dual sites for efficient electrocatalytic NO reduction to NH3

Kai Chen et al.

Summary: In this study, atomically Fe-doped and S-vacancy-rich MoS2 (Fe1/MoS2_x) is designed as a highly efficient electrocatalyst for NO-to-NH3 conversion. The Fe1/MoS2_x catalyst exhibits a maximum NH3-Faradaic efficiency of 82.5% and NH3 yield of 288.2 mu mol h_ 1 cm_ 2 at _ 0.6 V vs. RHE.

APPLIED CATALYSIS B-ENVIRONMENTAL (2023)

Add to Collection
Article Engineering, Environmental

Atomically dispersed Co catalyst for electrocatalytic NO reduction to NH3

Xiaotian Li et al.

Summary: This study presents the design of atomically dispersed Co anchored on MoS2 as a highly active and durable catalyst for electrocatalytic NO reduction to NH3. The Co1/MoS2 catalyst exhibits excellent NORR performance, outperforming most reported catalysts.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection
Article Energy & Fuels

Boosting the electrochemical activities of MnO2 for next-generation supercapacitor application: Adaptation of multiple approaches

Muhammad Usman Khalid et al.

Summary: A novel Ag-MnO2/MXene@NF electrode was developed by incorporating hydrothermal and post-sonication processes to boost its overall activity. Ag-doping and MXene reinforcement improved the conductivity of MnO2, while the sandwiching of Ag-MnO2 NWs between MXene sheets resulted in a hetero-structured composite with superb conductivity and high surface area. The nanostructured and spongy structure of Ag-MnO2/MXene@NF allowed for higher capacitance, impressive rate capability, and superb cyclic activity, making it suitable for advanced energy storage devices.

FUEL (2023)

Add to Collection
Article Chemistry, Analytical

Simultaneous Detection of Ruthenium and Osmium by Photochemical Vapor Generation-Inductively Coupled Plasma-Mass Spectrometry

Qing Yang et al.

Summary: Efficient simultaneous photochemical vapor generation (PVG) of ruthenium (Ru) and osmium (Os) in formic acid medium was demonstrated, with impressive limits of detection achieved for both elements. The synergistic enhancement from cobalt and cadmium ions on PVG efficiency was discovered, and the accuracy of the proposed PVG-ICP-MS method was validated through analysis of water samples. Additionally, volatile compounds of Ru were trapped and generation of Ru carbonyls was verified by high-resolution ESI-MS.

ANALYTICAL CHEMISTRY (2022)

Add to Collection
Article Materials Science, Ceramics

Synergistic impacts of composite formation and doping techniques to boost the photocatalytic aptitude of the BiFeO3 nanostructure

Muhammad Shahid et al.

Summary: This study demonstrated the synthesis of gadolinium-doped bismuth ferrite nanoparticles and their incorporation into reduced graphene oxide to form a nanocomposite. The nanocomposite exhibited superior photocatalytic activity compared to pure bismuth ferrite and gadolinium-doped bismuth ferrite, with enhanced transient photocurrent response. The improved photocatalytic properties were attributed to the synergistic effect of gadolinium doping and reduced graphene oxide inclusion.

CERAMICS INTERNATIONAL (2022)

Add to Collection
Article Materials Science, Ceramics

NiO nanoparticles and their nanohybrid with flat rGO sheets: As an ideal electroactive material for hybrid capacitor applications

Sabeera Rafiq et al.

Summary: Extensive research has shown that the performance of electrochemical capacitors (ECC) is largely controlled by the nature, structure, surface area, and conductivity of the electrode material. In this study, NiO nanoparticles were prepared using a surfactant-assisted wet-chemical technique and mixed with 2% and 4% rGO for ECC applications. The NiO@rGO nanohybrid exhibited improved surface area, conductivity, and specific capacity, making it suitable for ECC applications. The nanohybrid electrode with 4% graphene content showed high specific capacity and superior rate capability, as well as outstanding cyclic stability. The excellent electrochemical performance was attributed to the good conductivity, large number of active sites, and facile electrolyte diffusion enabled by the well-organized nanostructured constituents.

CERAMICS INTERNATIONAL (2022)

Add to Collection
Article Materials Science, Ceramics

Synthesis of La1-xGdxFe1-yCoyO3/r-GO nanocomposite with integrated features for the treatment of hazardous industrial effluents

Muhammad Sabir et al.

Summary: In this study, binary metal doping and composite formation strategies were used to prepare a highly efficient photocatalytic nanocomposite. The improved photocatalytic activity was achieved by tuning the bandgap, increasing the surface area, and reducing the electrical resistivity of the composite material.

CERAMICS INTERNATIONAL (2022)

Add to Collection
Article Materials Science, Ceramics

Wet-chemical synthesis of nanostructured Ce-doped mixed metal ferrites for the effective removal of azo dyes from industrial discharges

Tehmina Kousar et al.

Summary: Photocatalysis is a cost-effective and environmentally friendly technique for addressing water pollution caused by industrialization. In this study, Ce-doped cobalt/nickel mixed metal ferrite materials were synthesized using the microemulsion method. The C-9@CNMF material exhibited better mineralization of the CR dye, faster mineralization rate, and excellent recyclability and photo-corrosion resistance. These superior photocatalytic properties are attributed to the nanoarchitecture, larger specific surface area, tunable bandgap, and effective charge separation characteristics of the C-9@CNMF sample.

CERAMICS INTERNATIONAL (2022)

Add to Collection
Article Engineering, Chemical

Fabrication of Ag-doped MoO3 and its nanohybrid with a two-dimensional carbonaceous material to enhance photocatalytic activity

Sheraz Bashir et al.

Summary: Recently, two-dimensional carbon-based materials and their nanocomposites have been extensively studied as photocatalysts for water splitting and remediation. In this research, a novel 2D reduced graphene oxide based silver doped molybdenum trioxide photocatalyst was successfully synthesized and analyzed for its structural and photocatalytic properties. The results showed that the rGO/Ag/MoO3 photocatalyst exhibited significantly higher photocatalytic activity for dye degradation compared to pure MoO3 and Ag/MoO3 photocatalysts, attributed to its lower charge transfer resistance and higher electrical conductivity.

ADVANCED POWDER TECHNOLOGY (2022)

Add to Collection
Article Materials Science, Ceramics

Nanostructured CoFe2O4 and their nanohybrid with rGO as an efficient electrode for next-generation supercapacitor

Amira Alazmi

Summary: In this study, a novel, flexible, and self-supporting electrode based on nanostructured CoFe2O4 and rGO nanohybrid was prepared using the hydrothermal method for supercapacitor applications. The electrode exhibited high specific capacitance and excellent rate performance, attributed to its improved conductivity, nanoarchitecture, self-supporting design, flexible current collector, and hybrid composition. The integration of features in the CoFe2O4/rGO@CC electrode shows great potential for emerging supercapacitor applications.

CERAMICS INTERNATIONAL (2022)

Add to Collection
Article Chemistry, Inorganic & Nuclear

A reliable sensing platform based on tribenzamide for sensitive and selective detection of Pb (II) ions

Tayyaba Kokab et al.

Summary: In this study, a sensitive and selective sensor based on BOC6-modified GCE was developed for the detection of Pb(II) ions. The electrochemical platform showed improved sensing performance compared to bare GCE. Under optimized conditions, the sensor exhibited a linear concentration range and a low detection limit for lead ions. It demonstrated qualities of sensitivity, selectivity, stability, reproducibility, and practical applicability.

INORGANIC CHEMISTRY COMMUNICATIONS (2022)

Add to Collection
Article Chemistry, Physical

Gd-doped BiVO4 microstructure and its composite with a flat carbonaceous matrix to boost photocatalytic performance

Sheraz Bashir et al.

Summary: In this study, a flat reduced graphene oxide-based gadolinium-doped bismuth vanadate (rGO/Gd/BiVO4) composite was synthesized by a facile hydrothermal and ultra-sonication approach. The rGO/Gd/BiVO4 composite exhibited superior photocatalytic activity and charge separation efficiency compared to pristine BiVO4 and Gd/BiVO4.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Hydrothermally synthesized Gd-doped BiSbO4 nanoparticles and their graphene-based composite: A novel photocatalytic material

Sheraz Bashir et al.

Summary: rGO/Gd-BiSbO4 nanocomposite, fabricated by anchoring rare-earth doped BiSbO4 nanoparticles on rGO nanosheets, shows significantly higher photocatalytic activity compared to other catalysts for efficient degradation of organic dyes in industrial wastewater.

JOURNAL OF SOLID STATE CHEMISTRY (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Multifunctional Fe and Gd co-doped CeO2-RGO nanohybrid with excellent solar light mediated crystal violet degradation and bactericidal activity

H. A. Alburaih et al.

Summary: In this study, a multifunctional nanohybrid was synthesized and successfully used for crystal violet degradation and disinfection of S. aureus and E. coli under visible light irradiation. The nanohybrid exhibited enhanced photocatalytic and bactericidal activities compared to nanoparticles. The results suggested that the nanohybrid could improve charge separation and migration efficiency, leading to enhanced catalytic activity.

SYNTHETIC METALS (2022)

Add to Collection
Article Chemistry, Physical

Facile synthesis of W1-yFeyO3@NiO@RGO ternary nanohybrid with enhanced sunlight mediated photocatalytic and bactericidal activities for water purification

H. A. Alburaih et al.

Summary: A WFN@RGO nanohybrid with superior bactericidal and photo-catalytic properties was successfully fabricated via a two-step wet chemical process. Compared to WFN nanoparticles, the WFN@RGO nanohybrid showed higher catalytic activity and bactericidal activity under solar-light irradiation, possibly due to prolonged separation of photo-induced electron-hole pairs, lower bandgap energy, and the synergistic effect of W0.98Fe0.02O3, NiO, and RGO.

FLATCHEM (2022)

Add to Collection
Article Chemistry, Physical

Synergistic effect of doping and nanotechnology to fabricate highly efficient photocatalyst for environmental remediation

Muhammad Aadil et al.

Summary: Nanotechnology and metal-doping techniques were used to synthesize zinc-doped copper oxide (Zn0.4Co0.6O) photocatalyst with enhanced photocatalytic and antibacterial activities. The nanoarchitecture and modified electronic structure of the zinc-doped copper oxide sample resulted in increased photocatalytic activity and enhanced antibacterial activity.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection
Article Chemistry, Physical

Synthesis of carbon supported iron oxide nanochips and their composite with glutathione: A novel electrochemical sensitive material

Rabbia Tariq et al.

Summary: In this study, bare iron oxide nanochips, carbon-supported iron oxide nanochips, and glutathione-supported carbon-supported iron oxide nanocomposite were synthesized and characterized. The electrochemical sensing activities of the materials were evaluated and compared. The results showed that the glutathione-supported carbon-supported iron oxide nanocomposite exhibited outstanding electrocatalytic activity and sensitivity for nitrophenol isomer reduction. The proposed method could be potentially used for detecting environmental pollutants in water samples.

SURFACES AND INTERFACES (2022)

Add to Collection
Article Chemistry, Physical

Facile synthesis of W1-yFeyO3@NiO@RGO ternary nanohybrid with enhanced sunlight mediated photocatalytic and bactericidal activities for water purification

H. A. Alburaih et al.

Summary: In this research, a W0.98Fe0.02O3@NiO@RGO (WFN@RGO) nanohybrid with superior bactericidal and photo-catalytic properties was successfully fabricated via a two-step wet chemical process. The nanohybrid showed excellent catalytic stability and efficient degradation of MO dye under solar-light irradiation.

FLATCHEM (2022)

Add to Collection
Article Materials Science, Ceramics

Synthesis, characterization and charge transport properties of Pr-Ni Co-doped SrFe2O4 spinel for high frequency devices applications

Iqbal Ahmad et al.

Summary: Research has been done to synthesize spinel Pr-Ni co-substituted strontium ferrites with confirmed cubic structure and nanometer particle sizes. Changes in electrical properties were observed with increasing Pr3+ and Ni2+ ions content, showing enhanced resistivity and minimum dielectric losses.

CERAMICS INTERNATIONAL (2021)

Add to Collection
Article Materials Science, Ceramics

Fabrication of nickel foam supported Cu-doped Co3O4 nanostructures for electrochemical energy storage applications

Muhammad Aadil et al.

Summary: The synthesized Cu-doped Co3O4@NF sample exhibited excellent electrical conductivity, specific capacitance, and cyclic activity, attributed to its superb electrical conductivity, binder-free design, 2D morphology, porous nature, and hierarchical structure. These features not only enhanced the exposed surface area of the sample, but also protected it from pulverization, volume expansion, and agglomeration during electrochemical tests.

CERAMICS INTERNATIONAL (2021)

Add to Collection
Article Materials Science, Ceramics

Hydrothermal synthesis of CuS nanochips and their nanohybrids with CNTs for electrochemical energy storage applications

Humera Sabeeh et al.

Summary: Nanostructured carbonaceous materials, such as CNTs, graphene, and activated carbon, exhibit excellent conductivity and larger surface area, which can significantly enhance the electrochemical performance of transition metals based pseudocapacitive materials. The study successfully prepared copper sulfide nanochips via the hydrothermal method and improved their electrical conductivity and capacitive properties by forming nanohybrids with conductive CNTs. The nanohybrid sample demonstrated enhanced capacitive ability, gravimetric capacitance, and cyclic-aptitude compared to the pristine cobalt sulfide sample, showing great potential for practical application in next-generation electrochemical devices.

CERAMICS INTERNATIONAL (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Plasmonic photo-assisted electrochemical sensor for detection of trace lead ions based on Au anchored on two-dimensional g-C3N4/graphene nanosheets

Jia-Yue Hu et al.

Summary: A plasmonic photo-assisted electrochemical sensor was developed with Au anchored on 2D g-C3N4/rGO nanosheets, showing high sensitivity for detecting trace lead ions under visible light illumination. The sensor had a low detection limit of 0.1 nmol·L-1 and showed promising practical application potential through interference studies and real soil sample detection.

RARE METALS (2021)

Add to Collection
Article Engineering, Chemical

Facile synthesis of binary metal substituted copper oxide as a solar light driven photocatalyst and antibacterial substitute

Muhammad Aadil et al.

Summary: This study synthesized transition metal substituted CuO samples via wet chemical route for photocatalytic and antibacterial applications. Among the samples, CMAO showed excellent photocatalytic activity and bactericidal activity against both Gram-positive and Gram-negative bacterial strains. The results indicated that binary metal substituted CuO (CMAO) has the potential to effectively degrade dyes and eliminate bacteria in industrial effluents.

ADVANCED POWDER TECHNOLOGY (2021)

Add to Collection
Review Chemistry, Multidisciplinary

A Review on Heavy Metal Ions and Containing Dyes Removal Through Graphene Oxide-Based Adsorption Strategies for Textile Wastewater Treatment

Sasireka Velusamy et al.

Summary: Textile wastewater heavy metal pollution has become a severe global environmental issue, with significant impacts on natural water resources and human health. Graphene oxide as an adsorbent exhibits advantages in efficient removal of heavy metal ions, playing a crucial role in the remediation of textile wastewater.

CHEMICAL RECORD (2021)

Add to Collection
Article Chemistry, Analytical

Fabrication of rationally designed CNTs supported binary nanohybrid with multiple approaches to boost electrochemical performance

Muhammad Aadil et al.

Summary: This study fabricated a nanostructured hybrid electrode with a three-dimensional spatial framework, demonstrating excellent specific capacitance, good rate capability, and superior cyclic stability.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Add to Collection
Article Engineering, Electrical & Electronic

Label-free and simple detection of trace Pb(II) in tap water using non-faradaic impedimetric sensors

Abdulaziz K. Assaifan et al.

Summary: This study presents a simple non-faradaic impedimetric sensor for direct detection of lead ions in tap water, with high sensitivity, satisfactory selectivity, and promising potential for constructing miniaturized sensors for this purpose.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Fabrication of graphene supported binary nanohybrid with multiple approaches for electrochemical energy storage applications

Muhammad Aadil et al.

Summary: The Mn.Co3O4/r-GO nanohybrid electrode shows exceptional electrochemical activity, outstanding cyclic stability, and higher gravimetric capacitance.

SYNTHETIC METALS (2021)

Add to Collection
Article Materials Science, Ceramics

Synthesis of In2O3/GNPs nanocomposites with integrated approaches to tune overall performance of electrochemical devices

Sobia Jabeen et al.

Summary: In this study, In2O3 nanoparticles were prepared via a simple chemical route and incorporated into composites with graphene nanoplatelets through ultra-sonication. The IOG-30@NF composite showed superior electrochemical performance, with higher specific capacitance, rate capability, and cyclic stability compared to other electrodes tested.

CERAMICS INTERNATIONAL (2021)

Add to Collection
Review Pharmacology & Pharmacy

Toxic Mechanisms of Five Heavy Metals: Mercury, Lead, Chromium, Cadmium, and Arsenic

Mahdi Balali-Mood et al.

Summary: Industrial activities of the last century have led to increased human exposure to heavy metals such as mercury, lead, chromium, cadmium, and arsenic, resulting in acute or chronic poisonings through water, air, and food. These heavy metals accumulate in the body, causing toxic effects on various tissues and organs by disrupting cellular events and inducing oxidative stress. Common mechanisms of action of these metals include ROS generation, inhibition of antioxidant defense, enzyme inactivation, and selective binding to specific macromolecules, some leading to genomic instability and carcinogenicity through DNA damage and oxidative stress. Despite current knowledge, heavy metal poisoning incidents remain prevalent, necessitating preventive measures and effective treatment, possibly including chelation therapy.

FRONTIERS IN PHARMACOLOGY (2021)

Add to Collection
Article Electrochemistry

Fabrication of CNTs supported binary nanocomposite with multiple strategies to boost electrochemical activities

Muhammad Aadil et al.

Summary: In this study, CoS2/CNTs nanocomposite electrodes were successfully prepared via a two-step hydrothermal and post-annealing approach, showing excellent performance and cyclic stability for energy storage applications. The CNTs-supported CoS2 sample exhibited outstanding rate capability and improved electrochemical properties.

ELECTROCHIMICA ACTA (2021)

Add to Collection
Article Chemistry, Analytical

Indium-doped mesoporous Bi2S3-based electrochemical interface for highly sensitive detection of Pb(II)

Shiqi Wang et al.

Summary: In this study, flower-like In-doped Bi2S3 with mesoporous nanostructure was synthesized and used as an electrochemical sensing interface for the detection of Pb(II). The fabricated IDB/GCE showed high sensitivity, satisfied detection limit, robust stability, and remarkable anti-interference capability, and demonstrated reliable analysis of Pb(II) in real water samples.

MICROCHEMICAL JOURNAL (2021)

Add to Collection
Article Chemistry, Physical

Doping-mediated stabilization of copper vacancies to promote thermoelectric properties of Cu2-xS

Yu Zhang et al.

Summary: Doping with inert additives can enhance the thermoelectric performance and thermal stability of copper chalcogenides, with the optimal amount resulting in a significant improvement in power factor in the medium temperature range and a record dimensionless thermoelectric figure of merit above 2 at 880 K.

NANO ENERGY (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Efficient Electrocatalytic Nitrogen Fixation on FeMoO4 Nanorods

Ke Chu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Materials Science, Ceramics

Magnetically recyclable Ni1-xCdxCeyFe2-yO4-rGO nanocomposite photocatalyst for visible light driven photocatalysis

Abdur Rahman et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection
Article Chemistry, Analytical

Naked-eye lead(II) capturing from contaminated water using innovative large-pore facial composite materials

Md Rabiul Awual et al.

MICROCHEMICAL JOURNAL (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Visible light photocatalytic performance of La-Fe co-doped SrTiO(3 )perovskite powder

M. Abdi et al.

OPTICAL MATERIALS (2020)

Add to Collection
Article Materials Science, Ceramics

Enhanced electrochemical energy storage properties of carbon coated Co3O4 nanoparticles-reduced graphene oxide ternary nano-hybrids

Muhammad Aadil et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Wafer-Like CoS Architectures and Their Nanocomposites with Polypyrrole for Electrochemical Energy Storage Applications

Nabeela Ashraf et al.

CHEMISTRYSELECT (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Ternary hybrid of polyaniline-alanine-reduced graphene oxide for electrochemical sensing of heavy metal ions

Mehwish Akhtar et al.

SYNTHETIC METALS (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Honeycomb like architectures of the Mo doped ZnS@Ni for high-performance asymmetric supercapacitors applications

Awais Ali et al.

SYNTHETIC METALS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

The synthesis and application of (E)-N′-(benzo[d]dioxol-5-ylmethylene)-4-methyl-benzenesulfonohydrazide for the detection of carcinogenic lead

Mohammed M. Rahman et al.

RSC ADVANCES (2020)

Add to Collection
Article Green & Sustainable Science & Technology

Introducing an alternate conjugated material for enhanced lead(II) capturing from wastewater

Md Rabiul Awual et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection
Article Chemistry, Physical

Structure of Hydrated Kaolinite Edge Surfaces: DFT Results and Further Development of the ClayFF Classical Force Field with Metal-O-H Angle Bending Terms

Maxime Pouvreau et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Add to Collection
Article Chemistry, Physical

Fabrication of selective and sensitive Pb2+ detection by 2,2′-(-(1,2-phenylenebis(azaneylylidene))bis(methaneylylidene))diphenol by electrochemical approach for environmental remediation

Faisal M. Aqlan et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection
Article Environmental Sciences

Surfactant-assisted graphene oxide/methylaniline nanocomposites for lead ionic sensor development for the environmental remediation in real sample matrices

A. A. P. Khan et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2019)

Add to Collection
Article Green & Sustainable Science & Technology

Offering an innovative composited material for effective lead(II) monitoring and removal from polluted water

Md. Rabiul Awual et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Structured and graphitized boron doped diamond electrodes: Impact on electrochemical detection of Cd2+ and Pb2+ ions

Pavla Stenclova et al.

VACUUM (2019)

Add to Collection
Article Chemistry, Analytical

Sensitive and anti-interference stripping voltammetry analysis of Pb(II) in water using flower-like MoS2/rGO composite with ultra-thin nanosheets

Yu-Feng Sun et al.

ANALYTICA CHIMICA ACTA (2019)

Add to Collection
Article Chemistry, Physical

Novel composite Nafion membranes modified with copper phthalocyanine tetrasulfonic acid tetrasodium salt for fuel cell application

Yanan Wei et al.

JOURNAL OF MATERIOMICS (2019)

Add to Collection
Review Chemistry, Analytical

A review of the identification and detection of heavy metal ions in the environment by voltammetry

Yuanyuan Lu et al.

TALANTA (2018)

Add to Collection
Article Chemistry, Analytical

Fabrication of ZnO/rGO/PPy heterostructure for electrochemical detection of mercury ion

Yunpeng Zhuang et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2018)

Add to Collection
Article Materials Science, Multidisciplinary

ZnO@graphene nanocomposite modified electrode for sensitive and simultaneous detection of Cd (II) and Pb (II)

Jutiporn Yukird et al.

SYNTHETIC METALS (2018)

Add to Collection
Review Chemistry, Multidisciplinary

Progress on sensors based on nanomaterials for rapid detection of heavy metal ions

Yuan Liu et al.

SCIENCE CHINA-CHEMISTRY (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Light-Controlled Reversible Modulation of Frontier Molecular Orbital Energy Levels in Trifluoromethylated Diarylethenes

Martin Herder et al.

CHEMISTRY-A EUROPEAN JOURNAL (2017)

Add to Collection
Article Engineering, Electrical & Electronic

Tuning of band gap and photoluminescence properties of Zn doped Cu2S thin films by CBD method

S. Hemathangam et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2016)

Add to Collection
Article Biochemistry & Molecular Biology

Lead sensors development and antimicrobial activities based on graphene oxide/carbon nanotube/poly(O-toluidine) nanocomposite

Aftab Aslam Parwaz Khan et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)

Add to Collection
Article Chemistry, Physical

Magnetically separable and recyclable graphene-MgFe2O4 nanocomposites for enhanced photocatalytic applications

Imran Shakir et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection
Article Chemistry, Physical

Superior electrochemical activity of α-Fe2O3/rGO nanocomposite for advance energy storage devices

Muhammad Aadil et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection
Article Chemistry, Physical

Facile and Novel Chemical Synthesis, Characterization, and Formation Mechanism of Copper Sulfide (Cu2S, Cu2S/CuS, CuS) Nanostructures for Increasing the Efficiency of Solar Cells

Mehdi Mousavi-Kamazani et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

Add to Collection
Article Chemistry, Analytical

A sensitive electrochemical sensor using an iron oxide/graphene composite for the simultaneous detection of heavy metal ions

Sohee Lee et al.

TALANTA (2016)

Add to Collection
Review Chemistry, Analytical

A review on detection of heavy metal ions in water - An electrochemical approach

Manju Bhargavi Gumpu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Add to Collection
Article Chemistry, Analytical

A SnO2-Sb2O3 nanocomposite for selective adsorption of lead ions from water samples prior to their determination by ICP-OES

Mohammed M. Rahman et al.

MICROCHIMICA ACTA (2015)

Add to Collection
Review Chemistry, Multidisciplinary

Electrochemistry of Graphene and Related Materials

Adriano Ambrosi et al.

CHEMICAL REVIEWS (2014)

Add to Collection
Article Chemistry, Multidisciplinary

Low dimensional Ni-ZnO nanoparticles as marker of toxic lead ions for environmental remediation

Mohammed M. Rahman et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2014)

Add to Collection
Article Engineering, Multidisciplinary

Selective detection of toxic Pb(II) ions based on wet-chemically prepared nanosheets integrated CuO-ZnO nanocomposites

Mohammed M. Rahman et al.

COMPOSITES PART B-ENGINEERING (2013)

Add to Collection
Article Chemistry, Multidisciplinary

Co3O4 co-doped TiO2 nanoparticles as a selective marker of lead in aqueous solution

Sher Bahadar Khan et al.

NEW JOURNAL OF CHEMISTRY (2013)

Add to Collection
Article Chemistry, Physical

Colorimetric Detection of Heavy Metal Ions Using Label-Free Gold Nanoparticles and Alkanethiols

Yu-Lun Hung et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.