☆ 4.6 Article

Microstructure and mechanical properties of Ti-TiBw-x%Cu composites by powder metallurgy using atomized Ti-TiBw powder as raw materials

VACUUM (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Microstructures and tensile properties of low-cost TiBw/Ti-6Al-4V composites by vacuum reactive hot pressing

Zeqi Ren et al.

Summary: In this study, TiBw/Ti-6Al-4V composites were designed and fabricated using coarse Ti-6Al-4V powder. The microstructures and tensile properties were investigated, and the strengthening mechanisms were analyzed. The results showed that the composites exhibited high strength and ductility, with a tensile strength of 952 MPa and an elongation of 18.4% at room temperature. Additionally, the composites also showed excellent mechanical properties at high temperatures. This work demonstrates the feasibility of designing low-cost titanium matrix composites using coarse spherical powder and network microstructures.

VACUUM (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of power density on residual stress and microstructural behavior of Ti-2.5Cu alloy by laser shock peening without coating

M. V. Nataraj et al.

Summary: This study investigates the micro structural changes of Ti-2.5 Cu after laser peening with different laser intensities. XRD, EBSD, and TEM were used to analyze the microstructure. XPS was used to characterize the oxidation behavior of the samples. The results showed an increase in compressive residual stress and improved micro hardness with increasing laser intensity. TEM studies revealed nano precipitates, mechanical twins, and dislocation structures. EBSD results confirmed the formation of high angle grain boundaries and mechanical twins at higher laser energy.

VACUUM (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Keywords: Titanium matrix composites Electron beam remelting Microstructure evolution High-temperature oxidation behavior

HaoYang Zhang et al.

Summary: Electron beam remelting is an effective method to improve the strength and hardness of material surface by regulating the geometry and microstructure of grains and reinforcements. In this study, the microstructure and high-temperature oxidation behavior of remelted TiBw/TC4 composites with different heat inputs were systematically investigated. The preferentially precipitated TiBw acted as heterogeneous nucleation site to accelerate the nucleation and growth of TC4 alloy, and were pushed to the grain boundary due to the interfacial energy. The remelted nanoscale TiB whisker showed stacking faults with crystal structures of B27 and Bf. The surface hardness increased by nearly 40% under a line energy of 96 J/mm (4 mA) due to the smaller network structure TiBw and a moderate thickness remelting layer. After electron beam remelting treatment, the oxidation resistance of the composite was significantly improved due to the segregation of aluminum on the surface of the remelting layer during oxidation.

VACUUM (2022)

Add to Collection

Article Chemistry, Physical

Evaluation of the microstructures, strengthening mechanisms and corrosion behaviors of TiB2 powder added to Ti-8Ta-6Ni alloys through the vacuum sintering process

Shih-Hsien Chang et al.

Summary: The research found that adding 3% TiB2 to the Ti-8Ta-6Ni alloys and sintering at 1275 degrees Celsius for 1 hour resulted in optimal mechanical properties for the specimens.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of heat treatment on microstructure evolution and mechanical properties of selective laser melted Ti-6Al-4V and TiB/Ti-6Al-4V composite: A comparative study

Hailiang Li et al.

Summary: Post heat treatment significantly influences the microstructure evolution and mechanical properties of SLM-fabricated Ti-6Al-4V alloy and titanium matrix composite. The TiB precipitates in the TMC samples grew into larger whiskers with improved mechanical performance after heat treatment. A finer dual-phase matrix microstructure was achieved for TMC samples with higher yield strength after heat treatment.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Developing Cu modified Ti6Al4V alloys with a combination of high strength and ductility by electron beam freeform fabrication

Xiangshuo Li et al.

Summary: A thin-wall structure of Ti6Al4V-3Cu was prepared using electron beam freeform fabrication (EBF3) with Cu plated wire and a novel in-situ alloying method. The addition of Cu led to significant refinement of prior-beta grain, resulting in improved strength without significant decrease in ductility.

VACUUM (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of the sintering temperature on the microstructure, mechanical properties and densification characteristics of (TiB + TiC)/TC4 composite

Zheng-Yang Hu et al.

Summary: In this study, TiB whiskers and TiC particles reinforced TC4 matrix composites were synthesized by spark plasma sintering using a TC4-0.6wt.% B4C powder mixture at temperatures ranging from 550 degrees C to 1150 degrees C. The composite sintered at 1050 degrees C exhibited the highest tensile strength, yield strength, and plasticity. The aspect ratio of TiB whiskers increased almost linearly below 1050 degrees C, while the grain size of TiC increased with sintering temperature.

MATERIALS RESEARCH EXPRESS (2021)

Add to Collection

Reprint Materials Science, Multidisciplinary

Reprint: Boron modified titanium alloys

Gaurav Singh et al.

Summary: This paper reviews the advantages of microstructural refinement induced by the addition of boron in titanium alloys, including reducing grain size, improving processing response, lowering costs, and affecting the mechanical performance of the alloy at different temperatures.

PROGRESS IN MATERIALS SCIENCE (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Improvement of in vitro corrosion, wear, and mechanical properties of newly developed Ti alloy by thermal treatment for dental applications

Mohamed Hussein et al.

Summary: The study investigates the effects of thermal treatments on the TNZ alloy, with findings showing that cooling rate significantly influences corrosion resistance, while aged samples exhibit advantages in corrosion resistance and wear resistance.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

Add to Collection

Article Chemistry, Physical

Precipitation behavior of silicide and synergetic strengthening mechanisms in TiB-reinforced high-temperature titanium matrix composites during multi-directional forging

Shichen Sun et al.

Summary: A TiB-reinforced high-temperature titanium matrix composite was prepared using vacuum induction melting and multi-directional forging, leading to changes in both strength and plasticity. The precipitation behavior of silicides during forging was accelerated, enhancing the strength of the composite, but at high temperatures, the precipitation strengthening effect of silicides weakened, resulting in a decrease in strength.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Biomaterials

Effect of Ti2Cu precipitation on antibacterial property of Ti-5Cu alloy

Ju-Hui Wu et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

In-situ fabrication of gradient titanium oxide ceramic coating on laser surface textured Ti6Al4V alloy with improved mechanical property and wear performance

Shuo Yuan et al.

VACUUM (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Hybrid effect of TiCp and TiBw co-strengthening Ti matrix composites prepared by spark plasma sintering and hot extrusion

Lei Jia et al.

MATERIALS CHARACTERIZATION (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Optimization of mechanical property, antibacterial property and corrosion resistance of Ti-Cu alloy for dental implant

Jiewen Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Review: titanium-titanium boride composites

K. Morsi

JOURNAL OF MATERIALS SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Additive manufacturing of ultrafine-grained high-strength titanium alloys

Duyao Zhang et al.

NATURE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Cu content on wear resistance and mechanical behavior of Ti-Cu binary alloys

Feifei Yu et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Heat Treatment on Cu Distribution, Antibacterial Performance and Cytotoxicity of Ti-6Al-4V-5Cu Alloy

Zheng Ma et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructural aspects of in-situ TiB reinforced Ti-6Al-4V composite processed by spark plasma sintering

Saeid Ghesmati Tabrizi et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of aspect ratios of in situ formed TiB whiskers on the mechanical properties of TiBw/Ti-6Al-4V composites

Min Young Koo et al.

SCRIPTA MATERIALIA (2012)

Add to Collection

Review Chemistry, Physical

Effect of Ti2Cu precipitates on mechanical behavior of Ti-2.5Cu alloy subjected to different heat treatments

X. Yao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Add to Collection

Review Materials Science, Composites

Processing-structure-property aspects of particulate- and whisker-reinforced titanium matrix composites

S. C. Tjong et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Processing and properties of titanium-titanium boride (TiBw) matrix composites -: a review

K. Morsi et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Role of alloying elements in microstructures of beta titanium alloys with carbon additions

ZQ Chen et al.

MATERIALS SCIENCE AND TECHNOLOGY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.