☆ 4.6 Article

A novel strategy for estimating the diffusion behavior of hydrogen in metallic materials with the combined effect of stress corrosion and hydrogenation: Case study of 2.25Cr-1Mo-0.25V high-strength steel

VACUUM (2024)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Hydrogen Trapping Characteristics and Mechanical Degradation in a Duplex Stainless Steel

Dae Geon Lee et al.

Summary: We investigated the behavior of hydrogen and its effect on mechanical properties in duplex stainless steel under different charging conditions. In the ex-situ condition, hydrogen uptake increased linearly with charging time, with trapping mainly occurring at dislocations and grain boundaries in the ferrite phase. However, with prolonged charging time, trapping also occurred at the ferrite-austenite interface. In the in-situ condition, hydrogen uptake was accelerated and penetration into the steel interior was deeper, which was attributed to transport through gliding dislocations. The loss of elongation in the duplex stainless steel became less sensitive to hydrogen content as charging time increased, indicating a remarkable resistance to hydrogen embrittlement compared to conventional high strength steels.

METALS AND MATERIALS INTERNATIONAL (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Alleviation of Hydrogen Embrittlement to Delay Effective Hydrogen Diffusion Against MA Constituent Formation Due to Mo Solutes for 420 MPa Grade Offshore Steels

Jimin Nam et al.

Summary: This study investigates the effect of increasing Mo content on hydrogen embrittlement resistance in bainitic steels. The results show that while the addition of Mo increases the strength of the steel, the hydrogen embrittlement resistance is almost the same for steels with 0.2% Mo and 0.02% Mo. This is because the increase in Mo content leads to an increase in constituents that are sensitive to hydrogen embrittlement, but the Mo solutes delay hydrogen diffusion, thereby mitigating the degradation in embrittlement resistance.

METALS AND MATERIALS INTERNATIONAL (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental and Modeling Analysis of Hydrogen Motion Behavior in Welding Zone of 2.25Cr-1Mo-0.25 V Steel Welded Joint with Hydrogen Corrosion

Changdong Yin et al.

Summary: This study investigated the permeability of hydrogen in the base metal and welded metal of a 2.25Cr-1Mo-0.25 V steel welded joint through electrochemical hydrogen permeation test. Analytical models of hydrogen penetration and diffusion in the welding zone were established, and the effect of adding hydrogen-resistant coatings (HRCs) on hydrogen movement behavior in the steel substrate was studied. The findings provide important reference value for hydrogen damage protection measures and research on HRCs.

METALS AND MATERIALS INTERNATIONAL (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Temperature Dependency of Hydrogen Embrittlement in Thermally H-precharged STS 304 Austenitic Stainless Steel

Hanna Yang et al.

Summary: In this study, the resistance to hydrogen embrittlement of STS 304 austenitic stainless steel was investigated. The results showed that the resistance decreased with decreasing temperature and disappeared below -150 degrees C. The occurrence of hydrogen embrittlement at temperatures from 25 to -50 degrees C was attributed to strain-induced martensitic transformation and hydrogen diffusion into stress-concentrated regions.

METALS AND MATERIALS INTERNATIONAL (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrogen trapping and hydrogen embrittlement (HE) susceptibility of X70 grade high-strength, acid-resistant, submarine pipeline steel with Mg treatment

Fengjun Lang et al.

Summary: The hydrogen embrittlement susceptibility of X70 grade, acid-resistant, submarine pipeline steel with Mg treatment was studied. The hydrogen diffusion and trapping behavior in the tested steels treated with different Mg content were analyzed. The results showed that micro/nano-composite inclusions obtained via Mg treatment have a greater activation energy of hydrogen desorption and can trap more hydrogen, reducing its diffusion coefficient in the steel.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Article Materials Science, Multidisciplinary

The hydrogen-resistant surface of steels designed by alloy elements doping: First-principles calculations

X. L. Xiong et al.

Summary: The energetics of hydrogen atoms adsorption and absorption on the bcc-Fe(100) surface were investigated using DFT. It was found that the permeation of hydrogen atoms from the surface into the bulk via hopping between nearest-neighbor T-sites is an endothermic process determined by the surface permeation barrier. Based on thermodynamic analysis, it was predicted that surfaces doped with Mn, Cr, and V have lower hydrogen coverage and higher permeation barriers, while surfaces doped with W, Nb, Mo, Ti, Co, and C have higher hydrogen coverage and permeation barriers compared to the pure-Fe surface. Doping these alloy elements inhibits hydrogen diffusivity and guides the design of hydrogen-resistant surfaces for steel.

COMPUTATIONAL MATERIALS SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Hydrogen permeation behavior and mechanism of multi-layered graphene coatings and mitigation of hydrogen embrittlement of pipe steel

Kejun Shi et al.

Summary: The study demonstrates that using in situ deposition of multi-layered graphene coatings can mitigate hydrogen embrittlement of steel, improve its hydrogen resistance and corrosion resistance. By enhancing coating adhesion and inhibiting hydrogen diffusion, outstanding results are achieved in slow strain rate tests.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Review Chemistry, Physical

Application of atomic simulation for studying hydrogen embrittlement phenomena and mechanism in iron-based alloys

Linshuo Dong et al.

Summary: This study summarizes recent advances in using atomic simulations to understand the interaction between hydrogen atoms and various defects in iron-based alloys. The challenges and advantages of atomic simulations in revealing hydrogen-related behaviors and interaction mechanisms are discussed. The article also highlights scientific issues and future research directions in this field.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Hydrogen embrittlement fracture mechanism of 430 ferritic stainless steel: The significant role of carbides and dislocations

Tao Wang et al.

Summary: The effect of electrochemical hydrogen charging on AISI430 ferritic stainless steel was studied through tensile tests. Hydrogen significantly impacted the mechanical properties of the material, reducing elongation, increasing yield strength, and increasing tensile strength. The increase in tensile strength was attributed to hydrogen-induced dislocations pinning and the influence of carbide particles on dislocation glide. The softening effect of hydrogen was observed with increasing outgassing time. The HEDE mechanism played a key role in crack nucleation and the generation of cleavage regions in the material.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Feasibility of using ultrasonic-based prediction for hydrogen embrittlement susceptibility of high-strength heat-resistant steel 2.25Cr-1Mo-0.25V

Dongdong Ye et al.

Summary: This study investigated the quantitative relationship between introduced hydrogen content and mechanical property degradation of 2.25Cr-1Mo-0.25V steel using electrochemical hydrogen charging technique and tensile testing. A nondestructive testing method based on pulse-echo ultrasonic measurement technique was proposed, combined with mechanical assessment for hydrogen embrittlement (HE) susceptibility, to estimate the degree of hydrogen-induced plasticity loss of the steel. The study also utilized signal reconstruction technique to improve the measurement accuracy of ultrasonic echo signal. The results demonstrated the feasibility and validity of the measurement method in effective online prediction of HE susceptibility of the tested steel.

MEASUREMENT (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Interaction between dislocations, precipitates and hydrogen atoms in a 2000 MPa grade hot-stamped steel

Weijian Chen et al.

Summary: This study investigates the interaction between dislocations, precipitates, and hydrogen atoms in high strength hot-stamped steel and its effect on hydrogen embrittlement (HE) resistance. The results show that inhibiting the diffusion and aggregation of hydrogen atoms can effectively improve the resistance to HE. Additionally, dispersed V-rich (Ti, V)C precipitates play a positive role in enhancing the resistance to HE.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Study on hydrogen embrittlement and reversibility of hot-stamped aluminized 22MnB5 steel

Yi Liu et al.

Summary: This study investigated the hydrogen embrittlement behavior of ultrahigh strength hot-stamped aluminized 22MnB5 steel. The research found that the charging current density influenced the fracture mechanism, with low current density leading to quasi-cleavage fracture and high current density inhibiting hydrogen-induced cracking and promoting the reversibility of hydrogen embrittlement.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Temperature mitigates the hydrogen embrittlement sensitivity of martensitic steels in slow strain rates

Masoud Moshtaghi et al.

Summary: The joint effect of temperature and strain rate on hydrogen embrittlement properties of martensitic steel was investigated. It was found that at 50 °C, the elongation loss initially increased and then decreased with decreasing strain rate. This study provides the first report that at low strain rates, the temperature can mitigate hydrogen embrittlement susceptibility by increasing hydrogen effusion to the material surface and releasing a significant amount of hydrogen before the yield point. At 25 °C, the elongation loss increased with decreasing strain rate, as hydrogen could interact with mobile dislocations at lower strain rates, eventually leading to hydrogen-induced fracture. Additionally, intergranular cracks were observed, which can be attributed to prior austenite grain boundaries acting as paths for hydrogen-induced cracking.

VACUUM (2022)

Add to Collection

Review Chemistry, Physical

Permeation barriers for hydrogen embrittlement prevention in metals- A review on mechanisms, materials suitability and efficiency

Nour-Eddine Laadel et al.

Summary: This paper reviews the mechanisms and factors responsible for hydrogen embrittlement phenomenon and considers the main specifications for selecting appropriate materials. Additionally, effective surface modification solutions as permeation barriers to protect structural materials from hydrogen degradation are reviewed.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrogen embrittlement micromechanisms and direct observations of hydrogen transportation by dislocations during deformation in a carbon-doped medium entropy alloy

Dong-Han Kim et al.

Summary: In this study, the hydrogen embrittlement micromechanisms in Fe40Mn40Ni10Cr10 and Fe38Mn41Ni10Cr10C1 medium entropy alloy, as well as the effect of carbon interstitial on hydrogen distribution, were characterized. Ex-situ microstructural observations revealed that the segregation of carbon on grain boundaries suppressed the trapping of hydrogen in the grain boundaries for the carbon-doped alloy before deformation. However, the distribution of hydrogen was similar for both alloys after plastic strain, with a large fraction of hydrogen being trapped in the grain boundaries during deformation. The fully intergranular fracture mode in the hydrogen-affected area of both alloys was explained by the synergy of grain boundary dislocation reactions and hydrogen-enhanced grain boundary decohesion effects.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrogen Behavior in Ti-Added Reduced Activation Ferritic-Martensitic Steels

Kang-Mook Ryu et al.

Summary: The study found that the addition of titanium in TaTi-RAFM and EUROFER97 steels slows down hydrogen diffusion and increases its solubility in the lattice. The activation energy of hydrogen trapping increases with re-austenitization and quenching, suggesting dislocations provide trap sites with higher activation energy than Ta-rich MC carbides.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Review Chemistry, Physical

Review on hydrogen safety issues: Incident statistics, hydrogen diffusion, and detonation process

Fuyuan Yang et al.

Summary: The development and application of hydrogen energy hold promise for effectively addressing issues of energy waste and pollution in various industries, but the inherent characteristics of hydrogen make it challenging to ensure high safety during production, transportation, storage, and utilization. Therefore, key safety issues such as hydrogen leakage and diffusion, ignition, and explosion must be carefully analyzed and addressed to guarantee the safe and reliable utilization of hydrogen.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of strain rate on environmental hydrogen embrittlement susceptibility of a severely cold-rolled Al-Cu alloy

Mahdieh Safyari et al.

VACUUM (2020)

Add to Collection

Article Chemistry, Physical

Hydrogen Concentration Distribution in 2.25Cr-1Mo-0.25V Steel under the Electrochemical Hydrogen Charging and Its Influence on the Mechanical Properties

Changdong Yin et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A new perspective on hydrogen diffusion and hydrogen embrittlement in low-alloy high strength steel

X. Y. Cheng et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Observation of hydrogen trapping at dislocations, grain boundaries, and precipitates

Yi-Sheng Chen et al.

SCIENCE (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Important Factors on the Failure of Pipeline Steels with Focus on Hydrogen Induced Cracks and Improvement of Their Resistance: Review Paper

M. A. Mohtadi-Bonab et al.

METALS AND MATERIALS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Interaction between hydrogen and cyclic stress and its role in fatigue damage mechanism

Tianliang Zhao et al.

CORROSION SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Hydrogen embrittlement behavior of high strength low carbon medium manganese steel under different heat treatments

Yu Du et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Prestrain on Hydrogen Embrittlement Susceptibility of EH 36 Steels Using In Situ Slow-Strain-Rate Testing

Cheolho Park et al.

METALS AND MATERIALS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of hydrogen diffusion and trapping behavior under tensile stresses in a container steel

Dengpan Wu et al.

MATERIALS LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Role of microstructure on electrochemical hydrogen permeation properties in advanced high strength steels

Pengwei Zhou et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Add to Collection

Article Engineering, Multidisciplinary

Surface-limited permeation regime in the study of hydrogen interactions with metals

E. A. Denisov et al.

MEASUREMENT (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Strain gradient plasticity-based modeling of hydrogen environment assisted cracking

Emilio Martinez-Paneda et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Crack and blister initiation and growth in purified iron due to hydrogen loading

Marie C. Tiegel et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Electrochemistry

Determination of the Critical Plastic Strain-Induced Stress of X80 Steel through an Electrochemical Hydrogen Permeation Method

Weimin Zhao et al.

ELECTROCHIMICA ACTA (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of plastic deformation on the electrochemical and stress corrosion cracking behavior of X70 steel in near-neutral pH environment

Zhongyu Cui et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrogen Embrittlement Understood

Ian M. Robertson et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Evolution of hydrogen from AISI 200 stainless steel: A study to determine whether it is a diffusion or recombination limited process and experimental evidence for strongly bound hydrogen

V. Nemanic et al.

VACUUM (2014)

Add to Collection

Article Chemistry, Physical

Effect of strain-induced martensite on hydrogen embrittlement of austenitic stainless steels investigated by combined tension and hydrogen release methods

Lin Zhang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrogen embrittlement of ferritic steels: Observations on deformation microstructure, nanoscale dimples and failure by nanovoiding

T. Neeraj et al.

ACTA MATERIALIA (2012)

Add to Collection

Article Electrochemistry

Hydrogen embrittlement phenomena and mechanisms

Stan Lynch

CORROSION REVIEWS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of hydrogen content on the embrittlement in a Fe-Mn-C twinning-induced plasticity steel

Motomichi Koyama et al.

CORROSION SCIENCE (2012)

Add to Collection

Article Electrochemistry

Effect of tensile stress in elastic and plastic range on hydrogen permeation of high-strength steel in sour environment

Sung Jin Kim et al.

ELECTROCHIMICA ACTA (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Hydrogen solubility, diffusivity and trapping in tempered Fe-C-Cr martensitic steel under various mechanical stress states

S. Frappart et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical degradation of API X65 pipeline steel by exposure to hydrogen gas

Yun-Hee Lee et al.

METALS AND MATERIALS INTERNATIONAL (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrogen induced cracking (HIC) testing of low alloy steel in sour environment: Impact of time of exposure on the extent of damage

Jean Kittel et al.

CORROSION SCIENCE (2010)

Add to Collection

Article Chemistry, Physical

Microstructural aspects upon hydrogen environment embrittlement of various bcc steels

Thorsten Michler et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Study of the electrochemical permeation of hydrogen in iron

H. Addach et al.

CORROSION SCIENCE (2009)

Add to Collection

Article Chemistry, Physical

Analysis of electrochemical hydrogen permeation through X-65 pipeline steel and its implications on pipeline stress corrosion cracking

Y. F. Cheng

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Visualization of hydrogen transport in high strength steels affected by stress fields and hydrogen trapping

A Nagao et al.

SCRIPTA MATERIALIA (2001)

Add to Collection

Article Nanoscience & Nanotechnology

Martensite transformation and surface cracking of hydrogen charged and outgassed type 304 stainless steel

Q Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.