☆ 4.7 Article

Online monitoring of fatigue damage in welded joints using diffuse ultrasound

ULTRASONICS (2024)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Ratcheting characterization and its effect on low cycle fatigue behavior of DP600 steel sheet under cyclic shear path

Z. R. Zhang et al.

Summary: This study investigates the effects of shear deformation on thin-walled metal parts and its impact on fatigue behavior. A device for cyclic shear tests was designed and a DP600 sheet was used for experimentation. The results show that ratcheting deformation leads to local strain concentration and high dislocation density, resulting in improved cyclic strength and fatigue life.

INTERNATIONAL JOURNAL OF FATIGUE (2023)

Add to Collection

Article Engineering, Mechanical

Comparative assessment of strain-controlled fatigue performance of SS 316L at room and low temperatures

Hitarth Maharaja et al.

Summary: In this study, the strain-controlled low cycle fatigue (LCF) behavior of SS 316L at room temperature and -80℃ was investigated. It was found that the specimens at -80℃ exhibited initial cyclic softening followed by hardening due to strain-induced martensitic transformation (SIMT), resulting in an increase in fatigue life.

INTERNATIONAL JOURNAL OF FATIGUE (2023)

Add to Collection

Article Acoustics

Spectral noise and data reduction using a long short-term memory network for nonlinear ultrasonic modulation-based fatigue crack detection

Jinho Jang et al.

Summary: This paper presents a spectral noise and data reduction technique based on long short-term memory (LSTM) network for nonlinear ultrasonic modulation-based fatigue crack detection. The technique utilizes the LSTM network to reduce noise and data while preserving the amplitude of the nonlinear modulation components. Performance evaluation using complex geometry and real structure data demonstrates the applicability of the proposed method to various structures.

ULTRASONICS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Fatigue cracking criterion of high-strength steels induced by inclusions under high-cycle fatigue

Peng Wang et al.

Summary: The fatigue properties of high-strength steels are influenced by the size and type of inclusions. The inclusion-induced fatigue failure increases with the ultimate tensile strength (UTS), while the failure at sample surfaces decreases. A new fatigue cracking criterion based on the inclusion size is established to determine the occurrence of fatigue fracture and control inclusion size in high-strength steels.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Add to Collection

Review Engineering, Mechanical

A review of fatigue damage detection and measurement techniques

Fredrik Bjorheim et al.

Summary: This paper reviews the existing techniques for fatigue damage detection and measurement, focusing on fatigue crack monitoring and fatigue damage monitoring. Parameters of these techniques are critically evaluated for choosing the suitable method for detecting fatigue crack or damage in materials or components.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

Add to Collection

Article Engineering, Mechanical

Microstructure evolution and very-high-cycle fatigue crack initiation behavior of a structural steel with two loading intermittence modes

Yadong Zhou et al.

Summary: The effects of fatigue loading intermittence on railway wheel specimens at different locations were investigated experimentally. The results showed that longer pause time between loading cycles resulted in higher fatigue strength. The study also revealed the occurrence of martensitic transformation and discontinuous dynamic recrystallization due to fatigue loading, and crack initiation at inclusions or matrix.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

Add to Collection

Article Acoustics

Advanced numerical simulations considering crack orientation for fatigue damage quantification using nonlinear guided waves

Yu Fung Lee et al.

Summary: This study conducted a numerical investigation on fatigue crack trajectory simulation using SMART Crack Growth in ANSYS, and achieved the simulation of nonlinear ultrasonic waves for fatigue damage detection. The advanced simulation approach showed better agreement in terms of crack length compared to the common simulation approach, and considered the influence of crack orientation on acoustic nonlinearity, enhancing the capability of numerical modelling.

ULTRASONICS (2022)

Add to Collection

Article Acoustics

Hybrid geometrical full waveform inversion for ultrasonic defect characterisation

Xiao Yin et al.

Summary: This article presents a hybrid geometrical full waveform inversion method for accurate ultrasonic defect characterisation using a phased array. The method combines a multi-mode topological energy method for defect classification and initial defect model generation, with a GFWI procedure for reconstructing the defect shape. The method demonstrates high accuracy in defect sizing and is feasible for practical applications.

JOURNAL OF SOUND AND VIBRATION (2022)

Add to Collection

Article Engineering, Mechanical

In-situ fatigue life analysis by modal acoustic emission, direct current potential drop and digital image correlation for steel

Sulochana Shrestha et al.

Summary: Optimizing acoustic emission is useful for understanding fatigue crack growth of metal structures, and techniques like Direct Current Potential Drop and Digital Image Correlation can assist in interpreting the AE data. Accumulation of AE is correlated with initiation and propagation of cracks, similar to potential drop values and DIC strain field. 2D AE source location technique can successfully monitor crack growth, and frequency content correlates with crack growth mode.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Variance of elastic wave scattering from randomly rough surfaces

F. Shi

Summary: This article investigates the variance of elastic wave scattering from randomly rough surfaces using theoretical formulae derived with the elastodynamic Kirchhoff approximation. The study provides insights into the effects of rms roughness, correlation length, and surface length on the standard deviation of the scattering amplitude, with practical implications for applications such as ultrasonic wave detection.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Time of flight diffraction for rough planar defects

Stewart G. Haslinger et al.

Summary: This article investigates the implementation of ToFD methods for sizing rough defects using a purely theoretical approach, and uses high-fidelity finite element modeling and stochastic Monte Carlo methods to provide physical and statistical insights on the dependence on incident beam angle and degree of roughness for planar defects. It explores the complexity of rough defects compared to smooth defects in ultrasonic ToFD techniques, and examines the effects of roughness on the accuracy of crack sizing with statistical analysis.

NDT & E INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Nonlinear ultrasonic detection of partially closed cracks in metal plates using static component of lamb waves

Wujun Zhu et al.

Summary: The study shows that SCLWs are more sensitive to crack length, width, and orientation angle, making them useful for detecting the evolution of partially closed cracks in metal plates. Additionally, the acoustic nonlinearity parameter increases monotonically with increasing fatigue crack length.

NDT & E INTERNATIONAL (2021)

Add to Collection

Article Acoustics

Fully noncontact inspection of closed surface crack with nonlinear laser ultrasonic testing method

Xing Kou et al.

Summary: This study presents a noncontact nonlinear ultrasonic testing method based on lasers for closed surface crack inspection. Through nonlinear numerical simulation and experiment verification, it is proved that the method can increase the acoustic nonlinearity parameter with the micro closed crack length and decrease it with the micro closed crack buried depth.

ULTRASONICS (2021)

Add to Collection

Article Acoustics

Diffuse ultrasonic wave-based structural health monitoring for railway turnouts

Kai Wang et al.

ULTRASONICS (2020)

Add to Collection

Article Acoustics

Combined quantitative evaluation on early-stage fatigue damage of coarse-grained austenite stainless steel based on EBSD and ultrasonic technique

Zhongbing Luo et al.

ULTRASONICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Elastic shear wave scattering by randomly rough surfaces

Stewart G. Haslinger et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of microstructure on tensile and fatigue properties of laser-welded DP780 and DP980 high-strength steel joints

Lijun Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Application of correlation analysis techniques to surface wave testing for the evaluation of reinforced concrete structural elements

M. J. Rodriguez-Roblero et al.

NDT & E INTERNATIONAL (2019)

Add to Collection

Review Engineering, Mechanical

Ultrasonic waves for materials evaluation in fatigue, thermal and corrosion damage: A review

Vera Marcantonio et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Experimental Study of Defect Localization in a Cross-Ply Fiber Reinforced Composite with Diffuse Ultrasonic Waves

Qi Zhu et al.

APPLIED SCIENCES-BASEL (2019)

Add to Collection

Article Construction & Building Technology

Effectiveness of diffuse ultrasound for evaluation of micro-cracking damage in concrete

Eunjong Ahn et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Article Construction & Building Technology

Determination of the local constitutive properties of the welded steel joints using digital image correlation method

Yang Peng et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Engineering, Mechanical

Nonlinear ultrasonic modulation based failure warning for aluminum plates subject to fatigue loading

Yongtak Kim et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

Add to Collection

Article Acoustics

Analytical insight into breathing crack-induced acoustic nonlinearity with an application to quantitative evaluation of contact cracks

Kai Wang et al.

ULTRASONICS (2018)

Add to Collection

Article Acoustics

Nonlinear ultrasonic characterization of early degradation of fatigued Al6061-T6 with harmonic generation technique

S. B. Gebrekidan et al.

ULTRASONICS (2018)

Add to Collection

Article Materials Science, Coatings & Films

Laser ultrasonic damage detection in coating-substrate structure via Pearson correlation coefficient

Ying Chang et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Engineering, Mechanical

Experimental investigation on the heterogeneous ratchetting of SUS301L stainless steel butt weld joint during uniaxial cyclic loading

Huiliang Luo et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Add to Collection

Proceedings Paper Engineering, Mechanical

Fatigue Damage Monitoring of a Cast Iron Pipeline Using Distributed Optical Fibre Sensors

L. Wong et al.

STRUCTURAL HEALTH MONITORING - FROM SENSING TO DIAGNOSIS AND PROGNOSIS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Diffusely scattered and transmitted elastic waves by random rough solid-solid interfaces using an elastodynamic Kirchhoff approximation

Fan Shi et al.

PHYSICAL REVIEW B (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Diffuse scattered field of elastic waves from randomly rough surfaces using an analytical Kirchhoff theory

F. Shi et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)

Add to Collection

Article Engineering, Multidisciplinary

Optimization of fatigue damage indication in ferromagnetic low carbon steel

Ivan Tomas et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Review Materials Science, Characterization & Testing

Review of Second Harmonic Generation Measurement Techniques for Material State Determination in Metals

K. H. Matlack et al.

JOURNAL OF NONDESTRUCTIVE EVALUATION (2015)

Add to Collection

Article Acoustics

A Time-Domain Finite Element Boundary Integration Method for Ultrasonic Nondestructive Evaluation

Fan Shi et al.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2014)

Add to Collection

Article Materials Science, Multidisciplinary

The influence of stress-controlled tensile fatigue loading on the stress-strain characteristics of AISI 1045 steel

W. Mocko

MATERIALS & DESIGN (2014)

Add to Collection

Article Materials Science, Multidisciplinary

The fatigue damage development in a cast Al-Si-Cu alloy

Lech Dietrich et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Engineering, Multidisciplinary

Probabilistic Damage Identification Based on Correlation Analysis Using Guided Wave Signals in Aluminum Plates

Dong Wang et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2010)

Add to Collection

Article Materials Science, Characterization & Testing

Computational methods in eddy current crack detection at fastener sites in multi-layer structures

Jeremy S. Knopp et al.

NONDESTRUCTIVE TESTING AND EVALUATION (2009)

Add to Collection

Article Engineering, Mechanical

A high-cycle fatigue accumulation model based on electrical resistance for structural steels

B. Sun et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2007)

Add to Collection

Article Engineering, Mechanical

Influence of inclusion size on fatigue behavior of high strength steels in the gigacycle fatigue regime

J. M. Zhang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrasonic attenuation and microstructural evolution throughout tension-compression fatigue of a low-carbon steel

T. Ohtani et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Add to Collection

Article Instruments & Instrumentation

PZT-based active damage detection techniques for steel bridge components

Seunghee Park et al.

SMART MATERIALS AND STRUCTURES (2006)

Add to Collection

Article Acoustics

Detection of structural damage from the local temporal coherence of diffuse ultrasonic signals

JE Michaels et al.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2005)

Add to Collection

Article Engineering, Mechanical

Experimental investigations of fatigue cracks nucleation, growth and coalescence in structural steel

G Socha

INTERNATIONAL JOURNAL OF FATIGUE (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.