Related references
Note: Only part of the references are listed.Size Effect of Fractured Rock Mass Based on 3D Printed Model Testing
Youyu Wang et al.
ROCK MECHANICS AND ROCK ENGINEERING (2022)
Failure Performance of 3DP Physical Twin-Tunnel Model and Corresponding Safety Factor Evaluation
Quan Jiang et al.
ROCK MECHANICS AND ROCK ENGINEERING (2021)
Experimental investigation on splitting failure of high sidewall cavern under three-dimensional high in-situ stress
Qiangyong Zhang et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)
Large-scale geo-mechanical model tests for stability assessment of super-large cross-section tunnel
Liping Li et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)
Study on the failure mechanism of rock mass around a mined-out area above a highway tunnel-Similarity model test and numerical analysis
Yu Zhou et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)
Strength test of 3D printed artificial rock mass with pre-existing fracture
Youyu Wang et al.
UNDERGROUND SPACE (2021)
True Three-Dimensional Geomechanical Model Tests for Stability Analysis of Surrounding Rock During the Excavation of a Deep Underground Laboratory
Qiangyong Zhang et al.
ROCK MECHANICS AND ROCK ENGINEERING (2020)
Simulation test of spalling failure of surrounding rock in rectangular tunnels with different height-to-width ratios
Feng-qiang Gong et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2020)
Mechanical behavior of structurally reconstructed irregular columnar jointed rock mass using 3D printing
Yingjie Xia et al.
ENGINEERING GEOLOGY (2020)
Experimental evaluation of PMMA simulated tunnel stability under dynamic disturbance using digital image correlation
Zhili Tang et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)
Volumetric fracturing behavior of 3D printed artificial rocks containing single and double 3D internal flaws under static uniaxial compression
T. Zhou et al.
ENGINEERING FRACTURE MECHANICS (2019)
The 3D-Printing Technology of Geological Models Using Rock-Like Materials
Xia-Ting Feng et al.
ROCK MECHANICS AND ROCK ENGINEERING (2019)
Large-scale model experiment and numerical simulation on convergence deformation of tunnel excavating in composite strata
Sheng-Qi Yang et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)
Replication of internal defects and investigation of mechanical and fracture behaviour of rock using 3D printing and 3D numerical methods in combination with X-ray computerized tomography
J. B. Zhu et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
Feasibility Investigation of 3D Printing Technology for Geotechnical Physical Models: Study of Tunnels
Leibo Song et al.
ROCK MECHANICS AND ROCK ENGINEERING (2018)
Physical modeling of deformation failure mechanism of surrounding rocks for the deep-buried tunnel in soft rock strata during the excavation
Xiaoming Sun et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)
Physical model test and numerical simulation for the stability analysis of deep gas storage cavern group located in bedded rock salt formation
Q. Y. Zhang et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2017)
Visualization and Transparentization of the Structure and Stress Field of Aggregated Geomaterials Through 3D Printing and Photoelastic Techniques
Yang Ju et al.
ROCK MECHANICS AND ROCK ENGINEERING (2017)
Discontinuous deformation analysis of super section tunnel surrounding rock stability based on joint distribution simulation
Peng He et al.
COMPUTERS AND GEOTECHNICS (2017)
Reverse modelling of natural rock joints using 3D scanning and 3D printing
Quan Jiang et al.
COMPUTERS AND GEOTECHNICS (2016)
Displacement measurement techniques and numerical verification in 3D geomechanical model tests of an underground cavern group
Q. B. Zhang et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2016)
Identification of structural domains considering the size effect of rock mass discontinuities: A case study of an underground excavation in Baihetan Dam, China
Wen Zhang et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2016)
Multivariate adaptive regression splines and neural network models for prediction of pile drivability
Wengang Zhang et al.
GEOSCIENCE FRONTIERS (2016)
Model test to investigate the failure mechanisms and lining stress characteristics of shallow buried tunnels under unsymmetrical loading
Mingfeng Lei et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2015)
Model test study on surrounding rock deformation and failure mechanisms of deep roadways with thick top coal
S. C. Li et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2015)
A Preliminary Study of 3D Printing on Rock Mechanics
Chao Jiang et al.
ROCK MECHANICS AND ROCK ENGINEERING (2015)
Investigation of failure behavior of continuous rock mass around cavern under high internal pressure
Jukkrawut Tunsakul et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2013)
The effect of weak interlayer on the failure pattern of rock mass around tunnel - Scaled model tests and numerical analysis
Feng Huang et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2013)
In situ monitoring of rockburst nucleation and evolution in the deeply buried tunnels of Jinping II hydropower station
Shaojun Li et al.
ENGINEERING GEOLOGY (2012)
Reliability assessment on ultimate and serviceability limit states and determination of critical factor of safety for underground rock caverns
Wengang Zhang et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2012)
Testing and evaluation of strength and deformation behaviour of jointed rocks
V. B. Maji et al.
GEOMECHANICS AND GEOENGINEERING-AN INTERNATIONAL JOURNAL (2012)
Energy analysis for damage and catastrophic failure of rocks
Xie HePing et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2011)
Share Paper
