☆ 4.4 Article

Study on Friction Characteristics of ADC12-POM Gear Pair

TRIBOLOGY TRANSACTIONS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Experimental Investigation on the Wear Performance of Nano-Additives on Degraded Gear Lubricant

Harish Hirani et al.

Summary: This study investigated the degradation of a commercially available gear lubricant and explored the potential of nano-additives to reduce such degradation. Experimental studies were conducted on the chemical degradation of the lubricant by mixing different concentrations of hydrochloric acid, and the degradation was monitored using pH value, total acid number (TAN) value, and ATR-FTIR analysis. The experiments showed severe wear of the gear in chemically aged lubricant, which led to the exploration of suitable nano-additives. Graphite, graphene, and graphene oxide functionalized with silicon oxide (GO@SiO2) were chosen as the nano-additives, and tests were conducted to find the optimum additive for wear performance. The overall results indicate that nano-additives significantly reduce gear wear.

LUBRICANTS (2023)

Add to Collection

Article Engineering, Mechanical

A calculation method for friction coefficient and meshing efficiency of plastic line gear pair under dry friction conditions

Yangzhi Chen et al.

Summary: A method for calculating the friction coefficient and meshing efficiency of plastic gear pairs under dry friction conditions was studied both theoretically and experimentally, with a focus on polyoxymethylene parallel line gear pairs as an example. The experimental results validated the feasibility of the proposed calculation method.

FRICTION (2021)

Add to Collection

Article Engineering, Mechanical

Investigation of the effect of contact pattern design on the mechanical and thermal behaviors of plastic-steel helical gear drives

Victor Roda-Casanova et al.

Summary: The study investigates the effects of contact pattern design on plastic-steel helical gear drives, finding that appropriate design of pinion tooth surfaces can reduce maximum contact pressure and operating temperature, increase durability, improve performance and efficiency, and enhance the transmission's ability to absorb angular misalignments.

MECHANISM AND MACHINE THEORY (2021)

Add to Collection

Article Engineering, Mechanical

Analytical procedure for the optimization of plastic gear tooth root

Luca Landi et al.

Summary: The paper discusses the importance of using innovative analytical methods to design and optimize the root geometry of plastic gears in the absence of specific standards for plastic gear development. By comparing the results with standardized methods and verifying them through finite element numerical analysis, the paper provides a useful approach for designers to reduce root bending stress in plastic gears.

MECHANISM AND MACHINE THEORY (2021)

Add to Collection

Article Engineering, Mechanical

Durability testing and characterization of POM gears

M. Hribersek et al.

Summary: Polymer gears are widely used in power train applications due to their advantageous properties. This paper investigates the wear mechanism of a steel/POM gear pair, analyzing wear progression throughout the gear lifetime and calculating wear coefficients to improve understanding. Wear is characterized using a 3D optical scanning device, with spot temperatures of meshing gears recorded during testing.

ENGINEERING FAILURE ANALYSIS (2021)

Add to Collection

Article Engineering, Mechanical

Effect of friction on the contact stress of a coated polymer gear

Su-Min Bae et al.

FRICTION (2020)

Add to Collection

Article Engineering, Mechanical

Modeling and Simulation of Mild Wear of Spur Gear Considering Radial Misalignment

Paras Kumar et al.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

The wear resistance improvement of fibre reinforced polymer composite gears

Ken Mao et al.

WEAR (2019)

Add to Collection

Article Engineering, Mechanical

Prediction of friction coefficient in dry-lubricated polyoxymethylene spur gear pairs

Daniel Miler et al.

MECHANISM AND MACHINE THEORY (2019)

Add to Collection

Article Engineering, Mechanical

Gear module adjustment method for shrinkage compensation of injection molded plastic gears using single dedicated hob

Chung-Yu Tsai

MECHANISM AND MACHINE THEORY (2019)

Add to Collection

Article Engineering, Mechanical

Durability and design parameters of a Steel/PEEK gear pair

Damijan Zorko et al.

MECHANISM AND MACHINE THEORY (2019)

Add to Collection

Article Automation & Control Systems

Engineering modeling of wear profiles in tooth flank of polyamide spur gears

Oualid Ghelloudj et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Engineering, Manufacturing

Tooth surface temperature and power transmission efficiency of plastic sine-curve gear

Takao Koide et al.

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING (2017)

Add to Collection

Article Engineering, Mechanical

The dominant effect of temperature on the fatigue behaviour of polymer gears

M. Kalin et al.

WEAR (2017)

Add to Collection

Article Engineering, Mechanical

Improving the friction and wear of poly-ether-etherketone (PEEK) by using thin nano-composite coatings

Abdul Samad Mohammed et al.

WEAR (2016)

Add to Collection

Article Engineering, Mechanical

Reciprocating sliding wear behaviour of PEEK-based hybrid composites

V. Rodriguez et al.

WEAR (2016)

Add to Collection

Article Engineering, Mechanical

Effect of shaft misalignment and friction force on time varying mesh stiffness of spur gear pair

Ankur Saxena et al.

ENGINEERING FAILURE ANALYSIS (2015)

Add to Collection

Article Instruments & Instrumentation

Effects of linear and angular misalignment on a spur gear pair

R. Jones et al.

INSIGHT (2011)

Add to Collection

Article Engineering, Mechanical

Study on development of polyamide gears for improvement of load-carrying capacity

Hayrettin Duzcukoglu

TRIBOLOGY INTERNATIONAL (2009)

Add to Collection

Article Engineering, Mechanical

A new approach for polymer composite gear design

K. Mao

WEAR (2007)

Add to Collection

Article Engineering, Mechanical

Durability improvement method for plastic spur gears

Choong Hyun Kim

TRIBOLOGY INTERNATIONAL (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.