☆ 4.7 Article

Tribological and mechanical properties of ZrxNy films obtained by HiPIMS in DOMS mode

TRIBOLOGY INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Coatings & Films

Wettability and corrosion resistance of zirconium nitride films obtained via reactive high-power impulse magnetron sputtering

Jose D. Castro et al.

Summary: One of the main problems in ships is corrosion, which reduces the lifetime usage of ship parts and increases maintenance costs. Ceramic coatings, particularly zirconium nitrides obtained by reactive unbalanced magnetron sputtering technology, have been found to have high corrosion resistance. This study used high-power impulse magnetron sputtering in a reactive atmosphere to deposit ZrN films with varying nitrogen amounts. Various tests were conducted to evaluate the performance and corrosion resistance of the coatings. The results showed that the implementation of HiPIMS technology can effectively increase the corrosion resistance of coated ship metallic parts, reducing maintenance time and cost.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2023)

Add to Collection

Article

Effect of Nitrogen Partial Pressure on Structure, Mechanical Property, and Corrosion Behavior of ZrNx Films Prepared by Reactive DC Magnetron Sputtering

Daoxuan Liang et al.

SCANNING (2023)

Add to Collection

Article Materials Science, Coatings & Films

Improving high-temperature wear resistance of arc-evaporated AlCrN coatings by Mo alloying

Yong Chen et al.

Summary: The mechanical and tribological properties of AlCrMoN hard coatings with different Mo contents were investigated. The addition of Mo did not reduce the friction coefficient as expected, but it enhanced the wear resistance at 600 degrees C due to the modification of the tribolayer. The incorporation of molybdenum oxides increased the deformation ability of the tribolayer and formed a Mo-N-O interlayer at the interface, promoting the good adherence of the nanocrystalline tribolayer and preventing further wear.

SURFACE & COATINGS TECHNOLOGY (2023)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Corrosion and cavitation erosion resistance enhancement of cast Ni-Al bronze by laser surface melting

Q. N. Song et al.

Summary: The study revealed that laser surface melting treatment significantly improved the corrosion resistance and cavitation erosion resistance of cast Ni-Al bronze in marine environments. LSM NAB exhibited a more uniform microstructure and a more protective surface film, leading to a significant reduction in corrosion rate. Mechanical impact effect was identified as the primary cause of damage during cavitation erosion.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)

Add to Collection

Article Chemistry, Physical

Wetting and corrosion properties of CuxOy films deposited by magnetron sputtering for maritime applications

Jose D. Castro et al.

Summary: Copper-based materials can be safe and economic alternatives for producing anti-biofouling coatings. This study shows that oxygen incorporation into copper films can change their growth profile, and CuxOy coatings exhibit poor corrosion resistance and high ion release in seawater.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Materials Science, Coatings & Films

Understanding of fracture conditions and material response in a model TiN film/stainless steel substrate system-A cross-sectional scratch test study

Guizhi Wu et al.

Summary: This study investigates the adhesion property of a model TiN film on a stainless steel substrate through scratch tests. In addition to cracks and ploughing wear, microscopic deformations and fracture mechanisms are observed. The spallation failure at the edge of the scratch track, assigned as critical load (Lc2) with adhesive failure characteristics, is actually cohesive failure. The Lc3 site corresponds to cohesive failure in the substrate. Therefore, evaluating the adhesion of a film should consider the entire film/substrate system rather than solely analyzing the film surface.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Coatings & Films

Corrosion resistance of Cu-Zr(O) N films in a simulated seawater environment

Jose D. Castro et al.

Summary: The study indicates that a novel zirconium (oxy)nitride coating doped with copper has potential for antibacterial, anticorrosion, and antibiofouling properties, but the addition of copper results in decreased corrosion resistance against seawater.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article

Comparative Study on the Influence of Reactive Gas Flow Rate on the Growth and Properties of P-doped TiAlN Coatings Prepared by DcMS and HiPIMS

Olayinka Oluwatosin Abegunde et al.

Journal of Bio- and Tribo-Corrosion (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Physical Vapor Deposition Technology in Personal Protective Equipment Production: Improved Antibacterial and Hydrophobic Character of Textiles

Jose Antunes et al.

Summary: Personal protective equipment (PPE) needs to be more resilient to prevent the spread of pathogens, and sustainable materials and environmentally friendly technologies should be used. This study presents a new method of applying Ag/DLC coating to textiles, which increases the hydrophobicity and antibacterial activity of the fabrics without posing any risk to the human body.

COATINGS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

A critical review of marine biofilms on metallic materials

B. Tuck et al.

Summary: The formation of multi-species biofilms on marine infrastructure leads to significant economic losses and lacks effective and environmentally friendly treatment methods. Incomplete understanding of natural biofilm development remains a major limitation for biofilm control measures.

NPJ MATERIALS DEGRADATION (2022)

Add to Collection

Article Materials Science, Ceramics

Machining performance of TiSiN(Ag) coated tools during dry turning of TiAl6V4 aerospace alloy

D. Cavaleiro et al.

Summary: Research shows that depositing self-lubricant TiSiN(Ag) coatings on cutting inserts can significantly increase tool life during dry machining of TiAl6V4 aerospace alloy, especially at higher cutting speeds.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Review Polymer Science

Mechanical Properties of Protective Coatings against Marine Fouling: A Review

Alessandro Pistone et al.

Summary: The accumulation of marine organisms on ship hulls poses a global problem for maritime industries, with the use of biocide-containing paints threatening marine ecosystems. The focus is shifting towards non-biocidal solutions in protective coatings, particularly in developing hydrophobic coatings based on siloxane and epoxy resin for anti-fouling applications, with an emphasis on environmentally friendly and cost-effective solutions.

POLYMERS (2021)

Add to Collection

Article Chemistry, Physical

Cu oxidation mechanism on Cu-Zr(O)N coatings: Role on functional properties

Jose D. Castro et al.

Summary: Zirconium oxynitride (Zr(O)N) and Copper-Zirconium oxynitrides (Cu-Zr(O)N) were deposited on stainless steel substrates using DC reactive magnetron sputtering, with different oxygen contents achieved through a duty cycle controller. Chemical activation of the samples resulted in the antibacterial effect of CuZrON-DC100, where Cu reacted with O2- ions forming CuO. The multifunctionality of Cu-Zr (O)N coatings, combining aesthetic surface and antibacterial properties, was demonstrated.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Materials Science, Coatings & Films

REACH regulation challenge: Development of alternative coatings to hexavalent chromium for minting applications

E. Carneiro et al.

Summary: The REACH regulation enforced by the European Union has accelerated the search for alternative solutions to hexavalent chromium electrodeposition processes. Electroplated chromium coatings are widely used in applications requiring good mechanical and tribological properties. The study introduces Cr(Al,Si)N coatings as an alternative to hard chromium, showing outstanding mechanical properties and high resistance to wear.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of the effects of skewness Rsk and kurtosis Rku on tribological behavior in a pin-on-disc test of surfaces machined by conventional milling and turning processes

Elhadji Cheikh Talibouya Ba et al.

Summary: Friction and wear are influenced by material surface conditions, including deformation, segregation, and oxide film generation. Roughness is an important factor in tribological studies, with skewness and kurtosis parameters having more influence than conventional parameters. This study investigates the impact of skewness and kurtosis parameters on the surface of steel, showing different behaviors in friction curves and the influence of feed marks orientation.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2021)

Add to Collection

Article Materials Science, Coatings & Films

Dual mode of deep oscillation magnetron sputtering

V. O. Oskirko et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Coatings & Films

Surface functionalization of 3D printed structures: Aesthetic and antibiofouling properties

Jose D. Castro et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Engineering, Mechanical

Tailoring self-lubricating, wear-resistance, anticorrosion and antifouling properties of Ti/(Cu, MoS2)-DLC coating in marine environment by controlling the content of Cu dopant

Jingwen Zhang et al.

TRIBOLOGY INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Wear mechanisms identification using Kelvin probe force microscopy in TiN, ZrN and TiN/ZrN hard ceramic multilayers coatings

J. M. Gonzalez-Carmona et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Coatings & Films

High temperature tribological behaviour of TiSiN(Ag) films deposited by HiPIMS in DOMS mode

D. Cavaleiro et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Coatings & Films

Assessment of the mechanical and tribological performance of a ZrN PVD coating

M. H. Staia et al.

SURFACE ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

Tribological behavior of various ceramic materials sliding against CF/PTFE/graphite-filled PEEK under seawater lubrication

Fang-long Yin et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Corrosion, wear, and friction behavior of a number of multilayer two-, three- and multicomponent nitride coatings on different substrates, depending on the phase and elemental composition gradient

Anna Kameneva et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Tribological, Tribocorrosion and Wear Mechanism Studies of TaZrN Coatings Deposited by Magnetron Sputtering on TiAlV Alloy

Ernesto Garcia et al.

COATINGS (2018)

Add to Collection

Article Physics, Applied

Tutorial: Reactive high power impulse magnetron sputtering (R-HiPIMS)

Andre Anders

JOURNAL OF APPLIED PHYSICS (2017)

Add to Collection

Article Engineering, Manufacturing

Laser assisted finishing process for improved surface finish of fused deposition modelled parts

Mohammad Taufik et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

Add to Collection

Article Materials Science, Coatings & Films

Evaluation of Stoney equation for determining the internal stress of DLC thin films using an optical profiler

Sheida Shiri et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Coatings & Films

CrN thin films deposited by HiPIMS in DOMS mode

F. Ferreira et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Rice and Butterfly Wing Effect Inspired Low Drag and Antifouling Surfaces: A Review

Gregory D. Bixler et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2015)

Add to Collection

Review Polymer Science

Polymer brush coatings for combating marine biofouling

Wen Jing Yang et al.

PROGRESS IN POLYMER SCIENCE (2014)

Add to Collection

Review Materials Science, Multidisciplinary

Nano and Microscale Topographies for the Prevention of Bacterial Surface Fouling

Mary V. Graham et al.

COATINGS (2014)

Add to Collection

Review Biophysics

The interaction of marine fouling organisms with topography of varied scale and geometry: a review

Felicia Wong Yen Myan et al.

BIOINTERPHASES (2013)

Add to Collection

Review Materials Science, Multidisciplinary

Non-toxic antifouling strategies

Chelsea M. Magin et al.

MATERIALS TODAY (2010)

Add to Collection

Article Physics, Applied

Structural, electrical, optical, and mechanical characterizations of decorative ZrOxNy thin films -: art. no. 023715

P Carvalho et al.

JOURNAL OF APPLIED PHYSICS (2005)

Add to Collection

Review Materials Science, Multidisciplinary

Different approaches to superhard coatings and nanocomposites

S Veprek et al.

THIN SOLID FILMS (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Optical and electronic properties of magnetron sputtered ZrNx thin films

R Lamni et al.

THIN SOLID FILMS (2004)

Add to Collection

Article Engineering, Multidisciplinary

Determination of Young's modulus by nanoindentation

DJ Ma et al.

SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES (2004)

Add to Collection

Review Chemistry, Applied

Antifouling technology - past, present and future steps towards efficient and environmentally friendly antifouling coatings

DM Yebra et al.

PROGRESS IN ORGANIC COATINGS (2004)

Add to Collection

Review Materials Science, Multidisciplinary

Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology

WC Oliver et al.

JOURNAL OF MATERIALS RESEARCH (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.