Related references
Note: Only part of the references are listed.Effect of grinding depths on SiC nanogrinding behavior based on molecular dynamics
Yingli Liu et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2022)
Atomistic investigation of machinability of monocrystalline 3C-SiC in elliptical vibration-assisted diamond cutting
Liang Zhao et al.
CERAMICS INTERNATIONAL (2021)
The effect of surface texturing on the laser-induced wetting behavior of AlSi5 alloy on Ti6Al4V alloy
Haoyue Li et al.
APPLIED SURFACE SCIENCE (2021)
Effects of surface texturing on nanotribological properties and subsurface damage of monocrystalline GaN subjected to scratching investigated using molecular dynamics simulation
Jian Guo et al.
APPLIED SURFACE SCIENCE (2021)
Atomic Simulations of Deformation Mechanism of 3C-SiC Polishing Process with a Rolling Abrasive
Zhihua Yin et al.
TRIBOLOGY LETTERS (2021)
Molecular dynamics simulations of scratching characteristics in vibration-assisted nano-scratch of single-crystal silicon
Yue Chen et al.
APPLIED SURFACE SCIENCE (2021)
Interplay of mechanics and chemistry governs wear of diamond-like carbon coatings interacting with ZDDP-additivated lubricants
Valentin R. Salinas Ruiz et al.
NATURE COMMUNICATIONS (2021)
Molecular Dynamics Simulation on Cutting Mechanism in the Hybrid Machining Process of Single-Crystal Silicon
Changlin Liu et al.
NANOSCALE RESEARCH LETTERS (2021)
RE (La, Nd and Yb) doped CeO2 abrasive particles for chemical mechanical polishing of dielectric materials: Experimental and computational analysis
Jie Cheng et al.
APPLIED SURFACE SCIENCE (2020)
Material removal and interactions between an abrasive and a SiC substrate: A molecular dynamics simulation study
Van-Thuc Nguyen et al.
CERAMICS INTERNATIONAL (2020)
Amorphization-governed elasto-plastic deformation under nanoindentation in cubic (3C) silicon carbide
Liang Zhao et al.
CERAMICS INTERNATIONAL (2020)
Effect of ion implantation on material removal mechanism of 6H-SiC in nano-cutting: A molecular dynamics study
Bing Liu et al.
COMPUTATIONAL MATERIALS SCIENCE (2020)
Atomic-scale study of vacancy defects in SiC affecting on removal mechanisms during nano-abrasion process
Piao Zhou et al.
TRIBOLOGY INTERNATIONAL (2020)
Molecular dynamics study of the removal mechanism of SiC in a fixed abrasive polishing in water lubrication
Piao Zhou et al.
CERAMICS INTERNATIONAL (2020)
Genesis and evolution of extended defects: The role of evolving interface instabilities in cubic SiC
Giuseppe Fisicaro et al.
APPLIED PHYSICS REVIEWS (2020)
Study on strain rate and heat effect on the removal mechanism of SiC during nano-scratching process by molecular dynamics simulation
Binbin Meng et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
A numerical study on subsurface quality and material removal during ultrasonic vibration assisted cutting of monocrystalline silicon by molecular dynamics simulation
Houfu Dai et al.
MATERIALS RESEARCH EXPRESS (2019)
Molecular dynamics simulation of SiC removal mechanism in a fixed abrasive polishing process
Piao Zhou et al.
CERAMICS INTERNATIONAL (2019)
Diamond nanoscale surface processing and tribochemical wear mechanism
Song Yuan et al.
DIAMOND AND RELATED MATERIALS (2019)
Study on nanomechanical properties of 4H-SiC and 6H-SiC by molecular dynamics simulations
Zige Tian et al.
CERAMICS INTERNATIONAL (2019)
Effect of ultrasonic vibration on polishing monocrystalline silicon: surface quality and material removal rate
Tianbiao Yu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Experimental investigation on the ultrasonically assisted single-sided lapping of monocrystalline SiC substrate
Yong Hu et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Review on SiC MOSFETs High-Voltage Device Reliability Focusing on Threshold Voltage Instability
K. Puschkarsky et al.
IEEE TRANSACTIONS ON ELECTRON DEVICES (2019)
Nanoscratch of aluminum in dry, water and aqueous H2O2 conditions
Yongguang Wang et al.
APPLIED SURFACE SCIENCE (2019)
Mechanism of material removal during nanofinishing of aluminium in aqueous KOH: A reactive molecular dynamics simulation study
Prabhat Ranjan et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
Ultrasonic-assisted anodic oxidation of 4H-SiC (0001) surface
Xiaozhe Yang et al.
ELECTROCHEMISTRY COMMUNICATIONS (2019)
Improvement in polishing effect of silicon wafer due to low-amplitude megasonic vibration assisting chemical-mechanical polishing
Liang Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Novel polyelectrolyte-Al2O3/SiO2 composite nanoabrasives for improved chemical mechanical polishing (CMP) of sapphire
Tianxian Wang et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Towards a deeper understanding of nanoscratch-induced deformation in an optical glass
Jiacheng Fu et al.
APPLIED PHYSICS LETTERS (2018)
Molecular dynamics simulation of silicon carbide nanoscale material removal behavior
Yao Liu et al.
CERAMICS INTERNATIONAL (2018)
Investigation of anodic oxidation mechanism of 4H-SiC (0001) for electrochemical mechanical polishing
Xu Yang et al.
ELECTROCHIMICA ACTA (2018)
Material removal mechanism of two-dimensional ultrasonic vibration assisted polishing Inconel718 nickel-based alloy
Tianbiao Yu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Study on Pad Performance Deterioration in Chemical Mechanical Polishing (CMP) of Fused Silica
Yan Zhou et al.
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2018)
Numerical investigation on the influence of cutting-edge radius and grinding wheel speed on chip formation in SiC grinding
Wenbo Zhou et al.
CERAMICS INTERNATIONAL (2018)
Atomistic mechanisms of Cu CMP in aqueous H2O2: Molecular dynamics simulations using ReaxFF reactive force field
Xiaoguang Guo et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Local Strain Distribution and Microstructure of Grinding-Induced Damage Layers in SiC Wafer
Susumu Tsukimoto et al.
JOURNAL OF ELECTRONIC MATERIALS (2018)
Investigation on the Material Removal and Surface Generation of a Single Crystal SiC Wafer by Ultrasonic Chemical Mechanical Polishing Combined with Ultrasonic Lapping
Yong Hu et al.
MATERIALS (2018)
AFM observation of initial oxidation stage of 4H-SiC (0001) in electrochemical mechanical polishing
Xu Yang et al.
19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (2018)
Research on unbounded abrasive polishing process with assisted ultrasonic vibration of workpiece
Guangchao Han et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Polishing-pad-free electrochemical mechanical polishing of single-crystalline SiC surfaces using polyurethane-CeO2 core-shell particles
Junji Murata et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Study on chemical mechanical polishing of silicon wafer with megasonic vibration assisted
Zhai Ke et al.
ULTRASONICS (2017)
The Polishing Effect of SiC Substrates in Femtosecond Laser Irradiation Assisted Chemical Mechanical Polishing (CMP)
Chengwu Wang et al.
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2017)
ReaxFF Reactive Molecular Dynamics Study of Orientation Dependence of Initial Silicon Carbide Oxidation
Vito Simonka et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2017)
Diamond Lapping of Sapphire Wafer with Addition of Graphene in Slurry
Hsien-Kuang Liu et al.
ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE (2017)
Atomistic mechanisms of Si chemical mechanical polishing in aqueous H2O2: ReaxFF reactive molecular dynamics simulations
Jialin Wen et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Atomistic Mechanisms of Chemical Mechanical Polishing of a Cu Surface in Aqueous H2O2: Tight-Binding Quantum Chemical Molecular Dynamics Simulations
Kentaro Kawaguchi et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Molecular dynamics simulation study of deformation mechanisms in 3C-SiC during nanometric cutting at elevated temperatures
Saeed Zare Chavoshi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The optimization of chemical mechanical planarization process-parameters of c-plane gallium-nitride using Taguchi method and grey relational analysis
D. M. Nelabhotla et al.
MATERIALS & DESIGN (2016)
The mechanism of ductile deformation in ductile regime machining of 6H SiC
Gaobo Xiao et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
The effect of rough surface on nanoscale high speed grinding by a molecular dynamics simulation
Jia Li et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
Diamond machining of silicon: A review of advances in molecular dynamics simulation
Saurav Goel et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
A study of chemical products formed on sapphire (0001) during chemical-mechanical polishing
Xiaolei Shi et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Contribution of ultrasonic traveling wave to chemical-mechanical polishing
Li Liang et al.
ULTRASONICS (2015)
Nanoindentation and nanoscratching of iron: Atomistic simulation of dislocation generation and reactions
Yu Gao et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Mechanical properties of nanoparticles: basics and applications
Dan Guo et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)
Mechanisms of growth and defect properties of epitaxial SiC
F. La Via et al.
APPLIED PHYSICS REVIEWS (2014)
The Effect of Pad-Asperity Curvature on Material Removal Rate in Chemical-Mechanical Polishing
Sanha Kim et al.
6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014) (2014)
Extended study of the atomic step-terrace structure on hexagonal SiC (0001) by chemical-mechanical planarization
Xiaolei Shi et al.
APPLIED SURFACE SCIENCE (2013)
Material removal mechanism during porous silica cluster impact on crystal silicon substrate studied by molecular dynamics simulation
Ruling Chen et al.
APPLIED SURFACE SCIENCE (2013)
Anisotropy of single-crystal 3C-SiC during nanometric cutting
Saurav Goel et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)
Chemical mechanical polishing: Theory and experiment
Dewen Zhao et al.
FRICTION (2013)
Planarization process of single crystalline silicon asperity under abrasive rolling effect studied by molecular dynamics simulation
Lina Si et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2012)
Combined ultrasonic vibration and chemical mechanical polishing of copper substrates
Ming-Yi Tsai et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Oxidation of Silicon Carbide by O2 and H2O: A ReaxFF Reactive Molecular Dynamics Study, Part I
David A. Newsome et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
A quantitative assessment of nanometric machinability of major polytypes of single crystal silicon carbide
Xichun Luo et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Friction Anisotropy with Respect to Topographic Orientation
Chengjiao Yu et al.
SCIENTIFIC REPORTS (2012)
Effects of the ultrasonic flexural vibration on the interaction between the abrasive particles; pad and sapphire substrate during chemical mechanical polishing (CMP)
Wenhu Xu et al.
APPLIED SURFACE SCIENCE (2011)
Abrasive rolling effects on material removal and surface finish in chemical mechanical polishing analyzed by molecular dynamics simulation
Lina Si et al.
JOURNAL OF APPLIED PHYSICS (2011)
SILICON NANOPARTICLES Isolation leads to change
Graham L. W. Cross
NATURE NANOTECHNOLOGY (2011)
Molecular dynamics investigations on polishing of a silicon wafer with a diamond abrasive
Paras M. Agrawal et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2010)
Study of AFM-based nanometric cutting process using molecular dynamics
Peng-zhe Zhu et al.
APPLIED SURFACE SCIENCE (2010)
Ultrasonic flexural vibration assisted chemical mechanical polishing for sapphire substrate
Wenhu Xu et al.
APPLIED SURFACE SCIENCE (2010)
Grinding characteristics, material removal and damage formation mechanisms in high removal rate grinding of silicon carbide
Sanjay Agarwal et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool
Alexander Stukowski
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)
Grinding of silicon wafers: A review from historical perspectives
Z. J. Pei et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
A modeling approach for predicting the abrasive particle motion during chemical mechanical polishing
Elon J. Terrell et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2007)
Study micromechanism of surface planarization in the polishing technology using numerical simulation method
Xuesong Han
APPLIED SURFACE SCIENCE (2007)
Indentation-induced densification of soda-lime silicate glass
Satoshi Yoshida et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2007)
Nanometric cutting of copper: A molecular dynamics study
Q. X. Pei et al.
COMPUTATIONAL MATERIALS SCIENCE (2006)
Comparison of morphology and mechanical properties of surfactant aggregates at water-silica and water-graphite interfaces from molecular dynamics simulations
K Shah et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2006)
Tight-binding quantum chemical molecular dynamics simulation of mechano-chemical reactions during chemical-mechanical polishing process of SiO2 surface by CeO2 particle
A Rajendran et al.
APPLIED SURFACE SCIENCE (2005)
Analytical potential for atomistic simulations of silicon, carbon, and silicon carbide
P Erhart et al.
PHYSICAL REVIEW B (2005)
Material removal model for chemical-mechanical polishing considering wafer flexibility and edge effects
J Seok et al.
WEAR (2004)
Effects of mechanical parameters on CMP characteristics analyzed by two-dimensional frictional-force measurement
Y Homma et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Mechano-chemical polishing of silicon wafers
CCA Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Molecular dynamics simulations of mechanical deformation of amorphous silicon dioxide during chemical-mechanical polishing
E Chagarov et al.
JOURNAL OF APPLIED PHYSICS (2003)
A study on surface grinding of 300 mm silicon wafers
ZJ Pei
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Material removal mechanism in chemical mechanical polishing: Theory and modeling
JF Luo et al.
IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING (2001)
Fine grinding of silicon wafers
ZJ Pei et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
Share Paper
